Sludge minimisation technologies

The treatment and disposal of excess sludge represents a bottleneck of wastewater treatment plants all over the world, due to environmental, economic, social and legal factors. There is therefore a growing interest in developing technologies to reduce the wastewater sludge generation. The goal of this paper is to present the state-of-the-art of current minimisation techniques for reducing sludge production in biological wastewater treatment processes. An overview of the main technologies is given considering three different strategies: The first option is to reduce the production of sludge by introducing in the wastewater treatment stage additional stages with a lower cellular yield coefficient compared to the one corresponding to the activated sludge process (lysis-cryptic growth, uncoupling and maintenance metabolism, predation on bacteria, anaerobic treatment). The second choice is to act on the sludge stage. As anaerobic digestion is the main process in sewage sludge treatment for reducing and stabilising the organic solids, two possibilities can be considered: introducing a pre-treatment process before the anaerobic reaction (physical, chemical or biological pre-treatments), or modifying the digestion configuration (two-stage and temperature-phased anaerobic digestion, anoxic gas flotation). And, finally, the last minimisation strategy is the removal of the sludge generated in the activated sludge plant (incineration, gasification, pyrolysis, wet air oxidation, supercritical water oxidation).     

Life‐cycle assessment of local feedstock supply scenarios to compare candidate biomass sources

The use of life cycle assessment (LCA) as a comprehensive tool to assess environmental impacts of bioenergies is recommended. Nevertheless, several methodological points remain under debate, particularly regarding the feedstock production step, which is a key stage of bioenergy chains. The present work focuses on field emissions during feedstock production, improving assessment methods by the use of process‐based models. To do so, a real bioenergy chain, the local feedstock supply for a boiler located in northern France, was studied. The LCA compares flax shives, (the reference) with four other biomass sources: Miscanthus, cereal straw, linseed straw, and triticale as a whole plant. Six feedstock supply scenarios were also compared. The study aimed to test a new LCA methodology for agricultural chains by integrating local characteristics (such as climate, soil, and crop management data) and using models to estimate field dynamics of pesticide emissions and soil organic carbon (SOC). Results showed that flax shives and linseed straw had the lowest impacts, except for global warming: as a consequence, supply scenarios with the largest share of flax shives had the lowest impacts. For all selected impact categories, transportation and fertilization were the main contributors. SOC dynamics led to high C sequestration level (e.g. with Miscanthus) or to high CO ₂ emissions level (e.g. with flax shives), thus significantly influencing the global warming impact. Sensitivity analysis showed a large influence of allocation method (economic or mass‐based). This study demonstrated the relevance of integrating simulation models using local data in agricultural LCAs, especially for dynamics of SOC and pesticide from fields. Moreover, this work brought scientific elements to support the choice of flax shives as the main biomass feedstock, and the ranking of the other sources as alternative biomass supplies for the boiler.     

Life Cycle Assessment of Biosolids Land Application and Evaluation of the Factors Impacting Human Toxicity through Plant Uptake

Due to increasing environmental concerns in the wastewater treatment sector, the environmental impacts of organic waste disposal procedures require careful evaluation. However, the impacts related to the return of organic matter to agricultural soils are difficult to assess. The goals of this study are to assess the environmental impacts of land application of two types of biosolids (dried and composted, respectively) from the same wastewater treatment plant in France, and to improve the quantification of human toxicity. A life cycle assessment (LCA) was carried out on a case study based on validated data from an actual wastewater treatment plant. Numerous impacts were included in this analysis, but a particular emphasis was laid on human toxicity via plant ingestion. For six out of the eight impact categories included in the analysis, the dried biosolids system was more harmful to the environment than the composting route, especially regarding the consumption of primary energy. Only human toxicity via water, soil, and air compartments and ozone depletion impacts were higher with the composted biosolids.     

Recovery of activated carbon catalyst,calcium, nitrogen and phosphate from effluent following supercritical water gasification of poultry manure

A new method for suspending a fine, activated carbon catalyst in a biomass feedstock used for a supercritical water gasification (SCWG) continuous reactor is proposed. In a previous study, the organic matter in poultry manure was shown to be completely converted into gases such as H₂, CO₂ and CH₄ using SCWG. In practice, however, since the feedstock is not only composed of organic matter, but also contains inorganic material, water and catalyst, products such as gas, solid and liquid are produced during SCWG. The aim of this work was to investigate SCWG by-product utilization. This paper describes fundamental studies on the recovery of materials from SCWG products to develop a novel and simple recycling process that utilizes the by-products. A major portion of the activated carbon, monetite and ammonium sulfate can be isolated from the SCWG effluent.     

The Environmental Importance of Energy Use in Chemical Production

In many cases, policy makers and laymen perceive harmful emissions from chemical plants as the most important source of environmental impacts in chemical production. As a result, regulations and environmental efforts have tended to focus on this area. Concerns about energy use and greenhouse gas emissions, however, are increasing in all industrial sectors. Using a life cycle assessment (LCA) approach, we analyzed the full environmental impacts of producing 99 chemical products in Western Europe from cradle to factory gate. We applied several life cycle impact assessment (LCIA) methods to cover various impact areas. Our analysis shows that for both organic and inorganic chemical production in industrial countries, energy‐related impacts often represent more than half and sometimes up to 80% of the total impacts, according to a range of LCIA methods. Resource use for material feedstock is also important, whereas direct emissions from chemical plants may make up only 5% to 10% of the total environmental impacts. Additionally, the energy‐related impacts of organic chemical production increase with the complexity of the chemicals. The results of this study offer important information for policy makers and sustainability experts in the chemical industry striving to reduce environmental impacts. We identify more sustainable energy production and use as an important option for improvements in the environmental profile of chemical production in industrial countries, especially for the production of advanced organic and fine chemicals.     

Applying Life Cycle Tools and Process Engineering to Determine the Most Adequate Treatment Process Conditions. A Tool in Environmental Policy (12 pp)

Background The analysis of a wastewater treatment technology, under a expanded boundaries system which includes both the technology and the inputs required for its operation, quantifies the overall environmental impact that may result from the treatment of a wastewater stream. This is particularly useful for environmental policy makers being that a expanded boundaries system tends to provide a holistic view. The former view can be highly enriched with the use of process engineering tools, such as mathematical process modelling, process design, performance assessment and cost optimised models. Main Features The traditional approach used to assess waste treatment technologies is contrasted with a life cycle analysis (LCA) approach. The optimal design of a granular activated carbon adsorption (GAC) process is used as a model system to demonstrate the advantages of LCA approaches over traditional approaches. Further sections of the paper describe a mathematical framework for the assessment of technologies, design considerations applied in the cost optimised carbon adsorption model, the use of LCA techniques to perform an inventory of all emissions associated to the process system and, some of its environmental impacts. Results Economic and environmental considerations regarding the optimum process design are introduced as a basis for decision towards the selection and operating conditions of wastewater treatment technologies. Moreover, the use of LCA has revealed that the environmental burden associated with the wastewater treatment may produce a higher environmental impact than one that can be caused by untreated discharges. Conclusion The paper highlights the string advantages that environmental policy makers may have by combining LCA and process engineering tools. Furthermore, this approach can be incorporated into other existing treatment processes or for process designers.     

Effect of clay pretreatment on photofermentative hydrogen production from olive mill wastewater

The aim of this paper was to gain further insight into the effect of the clay pretreatment process on photofermentative hydrogen production. This two-stage process involved a clay pretreatment step followed by photofermentation which was performed under anaerobic conditions with the illumination by Tungsten lamps. Rhodobacter sphaeroides O.U.001 was used for photofermentation. Higher amounts of color (65%), total phenol (81%) and chemical oxygen demand (31%) removal efficiencies were achieved after clay pretreatment process. During photofermentative hydrogen production with the effluent of clay pretreatment process, the main organic compounds resulting higher hydrogen production rates were found to be acetic, lactic, propionic, and butyric acids. Compared to photofermentation using raw olive mill wastewater ( 16LH2/LOMW), the amount of photofermentative hydrogen production was doubled by using the effluent of the clay pretreatment process (31.5LH2/LOMW). The reasons for the improvement of hydrogen production by clay treatment can be attributed to the high removal of the hardly biodegradable compounds such as phenols; minor removal of organic acids, sugars and amino acids that are known to enhance photofermentative hydrogen production; and the color depletion of raw OMW which might cause a shadowing effect on the photosynthetic bacteria.     

LCA application to Russian Conditions

The environmental impact assessment existing in the Russian Federation at the present moment cannot provide potential scenarios of consequences for the environment from examined processes, since its goal is to calculate the money equivalent of emissions to the environment. Also, it cannot help the environmental specialist to choose the most environmentally sustainable scenario or process, proceeding from the whole life cycle of the object, because it is usually performed only for the use phase of an object. This study also aims to show possibilities for applying LCA methodology, as accepted in the ISO standards series 14040, and as applied to Russian conditions. The main purpose was to investigate a possibility of using the existing environmental impact assessment as the inventory stage in the LCA. As the minor goal, normalisation and weighting factor data for the Russian Federation were calculated on the basis of energy consumption extrapolation. In this paper, the environmental impacts are associated with a sewage wastewater facility. The inventory analysis is performed with data obtained from the MosvodokanalNIIproject (Moscow Research Institute for sewage wastewater treatment facilities) and supplemented with the SimaPro 5.0 database (the Netherlands). The environmental impact categories included and discussed in this study are eutrophication, global warming, landfill, acidification, ozone layer depletion and photochemical ozone creation. This study was performed for several design alternatives or scenarios of the wastewater facility. According to the LCA performed in this study, the most environmentally sustainable scenario is that which has the most effective and complicated treatment of sewage water and sludge.     

The Water Impact Index: a simplified single-indicator approach for water footprinting

Purpose

Along with climate change-related issues, improved water management is recognized as one of the major challenges to sustainability. However, there are still no commonly accepted methods for measuring sustainability of water uses, resulting in a recent proliferation of water footprint methodologies. The Water Impact Index presented in this paper aims to integrate the issues of volume, scarcity and quality into a single indicator to assess the reduction of available water for the environment induced by freshwater uses for human activities.

Methods

The Water Impact Index follows life cycle thinking principles. For each unit process, a volumetric water balance is performed; water flows crossing the boundaries between the techno-sphere and environment are multiplied by a water quality index and a water scarcity index. The methodology is illustrated on the current municipal wastewater management system of Milan (Italy). The Water Impact Index is combined with carbon footprint to introduce multi-impact thinking to decision makers. The Water Impact Index is further compared to results obtained using a set of three life cycle impact indicators related to water, from the ReCiPe life cycle impact assessment (LCIA) methodology.

Results and discussion

Onsite water use is the main contribution to the Water Impact Index for both wastewater management schemes. The release of better quality water is the main driver in favour of the scenario including a wastewater treatment plant, while the energy and chemicals consumed for the treatment increase the indirect water footprint and carbon footprint. Results obtained with the three midpoint indicators depict similar tendencies to the Water Impact Index.

Conclusions

This paper presents a simplified single-indicator approach for water footprinting, integrating volume, scarcity and quality issues, representing an initial step toward a better understanding and assessment of the environmental impacts of human activities on water resources. The wastewater treatment plant reduces the Water Impact Index of the wastewater management system. These results are consistent with the profile of the three midpoint indicators related to water from ReCiPe.     

Evaluating Local Crop Residue Biomass Supply: Economic and Environmental Impacts

The increasing interest in energy production from biomass requires a better understanding of potential local production and environmental impacts. This information is needed by local producers, biomass industry, and other stakeholders, and for larger scale analyses. This study models biomass production decisions at the field level using a case example of a biomass gasification facility constructed at the University of Minnesota??Morris (UMM). This institutional-scale application has an anticipated feedstock demand of about 8,000?Mg?year^?1. The model includes spatial impacts due to sub-field variation in soil characteristics and transportation costs. Results show that the amount of biomass producers could profitably supply within a 32.2-km radius of UMM increases as plant-gate biomass price increases from $59 to $84?Mg^?1, with 588,000?Mg annual biomass supply at $84?Mg^?1. Results also show that the most profitable tillage and crop rotation practices shift in response to increasing biomass price with producers shifting from a corn-soybean rotation toward continuous corn. While biomass harvest is conducive to increased soil erosion rates and reduced soil organic carbon levels, changes in crop production practices are shown to at least partially offset these impacts. Transportation costs tend to concentrate and intensify biomass production near the biomass facility, which also tends to concentrate environmental impacts near the facility.     

Antimicrobial colorants in molasses distillery wastewater and their removal technologies

Molasses is a widely used feedstock in the bioethanol distilleries, which generate the dark colored wastewater known as molasses distillery wastewater (MDWW). This type of wastewater leads to pollution problems in the local environment where it is disposed of due to the high content of pollutants, among which colorants are of great concern. The main MDWW colorants are polyphenols, melanoidin, alkaline degradation products of hexoses, and caramels whose formation, concentration and antimicrobial effects are summarized in this review. A lot of efforts have been made in the community to remove the colorants. Effective treatment methods are discussed, including biological treatment, enzymatic treatment, chemical oxidation, and coagulation. These technologies could also be applied to remove the colorants as a final treatment step after the anaerobic digestion.     

Energy and exergy analyses of a biomass-based hydrogen production system

In this paper, a novel biomass-based hydrogen production plant is investigated. The system uses oil palm shell as a feedstock. The main plant processes are biomass gasification, steam methane reforming and shift reaction. The modeling of the gasifier uses the Gibbs free energy minimization approach and chemical equilibrium considerations. The plant, with modifications, is simulated and analyzed thermodynamically using the Aspen Plus process simulation code (version 11.1). Exergy analysis, a useful tool for understanding and improving efficiency, is used throughout the investigation, in addition to energy analysis. The overall performance of the system is evaluated, and its efficiencies become 19% for exergy efficiency and 22% energy efficiency while the gasifier cold gas efficiency is 18%.     

Comparative life cycle assessment and financial analysis of mixed culture polyhydroxyalkanoate production

A life cycle assessment and financial analysis of mixed culture PHA (PHA(MC)) and biogas production was undertaken based on treating an industrial wastewater. Internal rate of return (IRR) and non-renewable CO(2)eq emissions were used to quantify financial viability and environmental impact. PHA(MC) was preferable to biogas production for treating the specified industrial effluent. PHA(MC) was also financially attractive in comparison to pure culture PHA production. Both PHA production processes had similar environmental impacts that were significantly lower than HDPE production. A large potential for optimisation exists for the PHA(MC) process as financial and environmental costs were primarily due to energy use for downstream processing. Under the conditions used in this work PHA(MC) was shown to be a viable biopolymer production process and an effective industrial wastewater treatment technology. This is the first study of its kind and provides valuable insight into the PHA(MC) process.     

Life cycle assessment of side stream removal and recovery of nitrogen from wastewater treatment plants

In the light of a circular economy, the Nijhuis Ammonia Recovery system (AECO‐NAR) was developed to not only remove nitrogen from wastewater streams, but also produce ammonium sulfate (AS), used as fertilizer, in a single plant. The goal of this paper was to quantify the environmental impacts of side stream ammonia recovery with the AECO‐NAR system and compares them with the impacts of side stream nitrogen removal combined SHARON (partly nitrification)‐anammox plant. For this, an environmental life cycle assessment was performed with a functional unit (FU) of the treatment of 1 kg of total dissolved nitrogen inflow. Since AS obtained by the AECO‐NAR is a by‐product of the ammonia removal process, allocation was based on system expansion. Foreground inventory data were obtained from a full‐scale plant. ReCiPe2016 was used to determine human health and biodiversity impacts. Results show that due to the production of AS in an integrated water treatment and production system, the AECO‐NAR avoids impacts of current AS production, leading to negative impact scores. Impacts per FU decrease with increasing inflow concentrations of ammonia. Main improvement options are the use of renewable energy and the replacement of the cleaning chemical citric acid with a sustainable alternative. Total impacts of the AECO‐NAR system diminish when comparing the system to the biological SHARON‐Anammox system, due to production of AS fertilizer product. Due to the fertilizer production step being integrated in the side stream treatment, the complete system is beneficial over ammonia recovery and wastewater treatment as separate systems.     

Comparative life-cycle assessments for biomass-to-ethanol production from different regional feedstocks

This study compares life-cycle (cradle-to-gate) energy consumption and environmental impacts for producing ethanol via fermentation-based processes starting with two lignocellulosic feedstocks: virgin timber resources or recycled newsprint from an urban area. The life-cycle assessment in this study employed a novel combination of computer-aided tools. These tools include fermentation process simulation coupled with an impact assessment software tool for the manufacturing process life-cycle stage impacts. The process simulation file was provided by the National Renewable Energy Laboratory (NREL) and was modified slightly to accommodate these different feedstocks. For the premanufacturing process life-cycle stage impacts, such as the fuels and process chemicals used, transportation, and some preparatory steps (wood chipping, etc.), a life-cycle inventory database (the Boustead Model) coupled with an impact assessment software tool were used (the Environmental Fate and Risk Assessment Tool). The Newsprint process has a slightly lower overall composite environmental index (created from eight impact categories) compared to the Timber process. However, the Timber process consumes less electricity, produces fewer emissions in total, and has less of a human health impact. The amount of life-cycle fossil energy required to produce ethanol is 14% of the energy content of the product, making the overall efficiency 86%. Process improvement strategies were evaluated for both feedstock processes, including recycle of reactor vent air and heat integration. Heat integration has the greatest potential to reduce fossil-derived energy consumption, to an extent that fossil-derived energy over the life cycle is actually saved per unit of ethanol produced. These energy efficiency values are superior to those observed in conventional fossil-based transportation fuels.     

A comparative life cycle assessment of two treatment technologies for the Grey Lanaset G textile dye: biodegradation by Trametes versicolor and granular activated carbon adsorption

Purpose

The aim of this study is to use life cycle assessment (LCA) to compare the relative environmental performance of the treatment using Trametes versicolor with a common method such as activated carbon adsorption. This comparison will evaluate potential environmental impacts of the two processes. This work compiles life cycle inventory data for a biological process that may be useful for other emergent biotechnological processes in water and waste management. LCA was performed to evaluate the use of a new technology for the removal of a model metal-complex dye, Grey Lanaset G, from textile wastewater by means of the fungus T. versicolor. This biological treatment was compared with a conventional coal-based activated carbon adsorption treatment to determine which alternative is preferable from an environmental point of view.

Materials and methods

The study is based on experimental research that has tested the novel process at the pilot scale. The analysis of the biological system ranges from the production of the electricity and ingredients required for the growth of the fungus and ends with the composting of the residual biomass from the process. The analysis of the activated carbon system includes the production of the adsorbent material and the electricity needed for the treatment and regeneration of the spent activated carbon. Seven indicators that measure the environmental performance of these technologies are included in the LCA. The indicators used are climate change, ozone depletion, human toxicity, photochemical oxidant formation, terrestial acidification, freshwater eutrophication, marine eutrophication, terrestrial ecotoxicity, freshwater ecotoxicity, marine ecotoxicity, metal depletion and fossil depletion.

Results

The results show that the energy use throughout the biological process, mainly for sterilisation and aeration, accounts for the major environmental impacts with the inoculum sterilisation being the most critical determinant. Nevertheless, the biological treatment has lower impacts than the physicochemical system in six of these indicators when steam is generated directly on site. A low-grade carbon source as an alternative to glucose might contribute to reduce the eutrophication impact of this process.

Conclusions

The LCA shows that the biological treatment process using the fungus T. versicolor to remove Grey Lanaset G offers important environmental advantages in comparison with the traditional activated carbon adsorption method. This study also provides environmental data and an indication of the potential impacts of characteristic processes that may be of interest for other applications in the field of biological waste treatment and wastewater treatment involving white-rot fungi.     

Switchgrass for bioethanol and other value-added applications: a review

Switchgrass is a promising feedstock for value-added applications due to its high productivity, potentially low requirements for agricultural inputs and positive environmental impacts. The objective of this paper is to review published research on the conversion of switchgrass into bioethanol and other value-added products. Environmental benefits associated with switchgrass include the potential for carbon sequestration, nutrient recovery from runoff, soil remediation and provision of habitats for grassland birds. Pretreatment of switchgrass is required to improve the yields of fermentable sugars. Based on the type of pretreatment, glucose yields range from 70% to 90% and xylose yields range from 70% to 100% after hydrolysis. Following pretreatment and hydrolysis, ethanol yields range from 72% to 92% of the theoretical maximum. Other value-added uses of switchgrass include gasification, bio-oil production, newsprint production and fiber reinforcement in thermoplastic composites. Future prospects for research include increased biomass yields, optimization of feedstock composition for bioenergy applications, and efficient pentose fermentation to improve ethanol yields.     

Anaerobic and complementary treatment of domestic sewage in regions with hot climates--a review

This study presents a literature review on the treatment of domestic sewage in controlled environments having the anaerobic process and specifically the upflow anaerobic sludge blanket (UASB) concept as the core, under natural hot conditions. The UASB process application is however beset by the preponderance of suspended solids, and the paper looks at its optimization via pre- and post-treatments to curb the prevailing problems, in the light of possible discharge and re-use/recycling/resource recovery, leading to efficient environmental protection. Pre-treatment clarification could be done with ferric chloride/polyelectrolyte, so that phosphate precipitates during the process. The pre-treated liquid phase can be submitted to a high rate anaerobic process, using the simple and robust UASB technology. In a subsequent post-treatment step, ammonium can be removed by ion exchange using a zeolite column through which the wastewater percolates after leaving the anaerobic digester. The various stages can also eliminate a large fraction of the pathogens present in the raw wastewater, mainly through the pre-treatment sedimentation and the ion exchange filtration. The sludge produced in the precipitation stage can be stabilized in a conventional anaerobic digester. Integration of the different treatment steps provides a sustainable technology to treat domestic sewage under hot climate conditions.     

Life cycle assessment (LCA) of industrial milk production

A Life Cycle Assessment (LCA) was carried out for milk production extending from the origin of the inputs to the agricultural step to the consumer phase and the waste management of the packaging. Three Norwegian dairies of different sizes and degree of automation were studied. The main objectives were to find any hot spots in the life cycle of milk, to determine the significance of the dairy size and degree of automation, and to study the influence of transport. The agriculture was found to be the main hot spot for almost all the environmental themes studied, although the dairy processing, packaging, consumer phase and waste management were also of importance. The consumer phase was the main contributor to photo-oxidant formation and important regarding eutrophication. The small dairy was found to have a greater environmental impact than the middle-sized and the largest dairies. The transport did not have any major influence.     

有机污染环境植物修复技术

利用物理、化学方法修复有机污染环境,费用昂贵,而且还可能使当地的生态资源难以再利用,对于大面积污染土壤也难以实施。植物修复,利用植物吸收、降解以及根际圈降解的作用方式将有机污染物从环境中彻底去除,具有处理费用相对低廉、对环境扰动少和使资源可持续利用的特点,目前已成为环境科学领域的一大热点和前沿。本文对环境中主要有机污染物的发生机理、近年来植物修复有机污染的研究进展做一综述,并对有机污染植物修复的强化措施进行了展望。