Boundaries of the pSC101 minimal replicon are conditional.

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.     

Excess intracellular concentration of the pSC101 RepA protein interferes with both plasmid DNA replication and partitioning.

RepA, a plasmid-encoded gene product required for pSC101 replication in Escherichia coli, is shown here to inhibit the replication of pSC101 in vivo when overproduced 4- to 20-fold in trans. Unlike plasmids whose replication is prevented by mutations in the repA gene, plasmids prevented from replicating by overproduction of the RepA protein were lost rapidly from the cell population instead of being partitioned evenly between daughter cells. Removal of the partition (par) locus increased the inhibitory effect of excess RepA on replication, while host and plasmid mutations that compensate for the absence of par, or overproduction of the E. coli DnaA protein, diminished it. A repA mutation (repA46) that elevates pSC101 copy number almost entirely eliminated the inhibitory effect of RepA at high concentration and stimulated replication when the protein was moderately overproduced. As the RepA protein can exist in both monomer and dimer forms, we suggest that overproduction promotes RepA dimerization, reducing the formation of replication initiation complexes that require the RepA monomer and DnaA; we propose that the repA46 mutation alters the ability of the mutant protein to dimerize. Our discovery that an elevated intracellular concentration of RepA specifically impedes plasmid partitioning implies that the RepA-containing complexes initiating pSC101 DNA replication participate also in the distribution of plasmids at cell division.     

Isolation and characterization of plasmid mutations that enable partitioning of pSC101 replicons lacking the partition (par) locus.

Second-site mutations that allow stable inheritance of partition-defective pSC101 plasmids mapped to seven distinct sites in the 5' half of the plasmid repA gene. While the mutations also elevated pSC101 copy number, there was no correlation between copy number increase and plasmid stability. Combinations of mutations enabled pSC101 DNA replication in the absence of integration host factor and also stabilized par-deleted plasmids in cells deficient in DNA gyrase or defective in DnaA binding. Our findings suggest that repA mutations compensate for par deletion by enabling the origin region RepA-DNA-DnaA complex to form under suboptimal conditions. They also provide evidence that this complex has a role in partitioning that is separate from its known ability to promote plasmid DNA replication.     

New pSC101-derivative cloning vectors with elevated copy numbers

Mutations that increase the copy number of the pSC101 replicon have been used for construction of new cloning vectors. Replacement of glutamate at position 93 in RepA yields plasmids that replicate at medium (27 copies/cell) and high (approximately 240 copies/cell) copy numbers. Based on the crystal structure of RepE, a structurally similar replication initiator protein from the F factor, the pSC101 repA mutants are predicted to be defective in dimerization. The cloning vectors permit increased expression of gene products along with the advantages of pSC101-derivative plasmids, including stable maintenance and compatibility with ColE1 plasmids. The plasmids also allow blue/white screening for DNA inserts and impart resistance to ampicillin, chloramphenicol and kanamycin. The vectors were used in a genetic assay to suppress temperature-sensitive mutants of ffh, encoding the protein component of the Escherichia coli signal recognition particle, by overproduction of 4.5S RNA. While expression of 4.5S RNA from a wild type pSC101-derivative plasmid was not sufficient for suppression, use of the new vectors did suppress the temperature-sensitive phenotype.     

Plasmid pSC101 replication mutants generated by insertion of the transposon Tn1000

A derivative of pSC101, pLC709, was constructed by ligation of the HincII-A fragment of pSC101 to the mini-colEI plasmid pVH51 and to a DNA fragment encoding resistance to the antibiotics streptomycin and spectinomycin. Insertions of the transposon Tn1000 (gamma-delta) into the pSC101 replication region of pLC709 were isolated following cotransfer of the plasmid with the sex factor F. The sites of insertion of the transposon were determined by restriction enzyme analysis and the replication and incompatibility properties of the insertion plasmids and DNA fragments cloned from them were analysed. The insertion mutations defined a locus, inc, of approximately 200 base-pairs that is responsible for pSC101-specific incompatibility. Two mutations adjacent to this region inactivate pSC101 replication but can be complemented in trans by a wild-type pSC101 plasmid, and thus define a trans-acting replication function, rep. The inc locus is within a larger region of some 450 base-pairs that is essential for pSC101 replication and that includes the origin of replication. This 450 base-pair segment can replicate in the presence of a helper plasmid that supplies the rep function in trans.     

Replication of pSC101: effects of mutations in the E. coli DNA binding protein IHF

Summary We have shown that the plasmid pSC101 is unable to be maintained in strains of E. coli carrying deletions in the genes himA and hip which specify the pleitropic heterodimeric DNA binding protein, IHF. We show that this effect is not due to a modulation of the expression of the pSC101 RepA protein, required for replication of the plasmid. Inspection of the DNA sequence of the essential replication region of pSC101 reveals the presence of a site, located between the DnaA binding-site and that of RepA, which shows extensive homology with the consensus IHF binding site. The proximity of the sites suggests that these three proteins, IHF, DnaA, and RepA may interact in generating a specific DNA structure required for initiation of pSC101 replication.     

DNA bending near the replication origin of IncFII plasmid NR1.

The DNA replication origin of plasmid NR1 is located approximately 190 base pairs downstream from the 3' end of the repA1 gene, which encodes the essential initiation protein for replication of the plasmid. Restriction endonuclease fragments that contain the NR1 replication origin and its flanking sequences at circularly permuted positions were obtained by digesting oligomers of ori-containing DNA fragments with sets of enzymes that each cut only once in every ori fragment. Polyacrylamide gel electrophoresis of these permuted restriction fragments showed anomalous mobilities, indicating the presence of a DNA bending locus. Through analysis of the relative mobility plots of these permuted fragments, we found one or two possible DNA bending sites located in the intervening region between the repA1 gene and the replication origin of NR1. It seems possible that DNA bending in this region might help to orient the replication origin alongside the repA1 gene, which could contribute to the cis-acting character of the RepA1 initiation protein.     

A copy-number mutant of plasmid pSC101

Copy-number mutants of plasmid pSC101 were isolated by u.v. mutagenesis and selection for elevated expression of ampicillin resistance. Three independent mutations were identical and mapped in codon 93 of the initiation protein RepA. The mutated plasmids were maintained at a level four to five times higher than that of the wild type. For one of them, it was determined that: (i) the mRNA of the autoregulated repA gene, cloned onto a pUC19 plasmid under the control of its own promoter, was expressed at a level 1.7 times higher than that of the wild type; (ii) the RepA protein, under the same conditions, was expressed at a similarly higher level; (iii) the affinity of the mutated protein for three repeated sequences in the origin region of the plasmid was, on average, 3.4 times higher than that of the wild-type protein. We postulate that the copy-number effect is due to a combination of these two effects, i.e. higher protein concentration and increased affinity of the protein for the repeated sequences.     

The RepA protein of plasmid pSC101 controls Escherichia coli cell division through the SOS response

Although plasmid copy number varies widely among different plasmid species, normally copy number is maintained within a narrow range for any given plasmid. Such copy number control has been shown to occur by regulation of the rate of plasmid DNA replication. Here we report a novel mechanism by which the pSC101 plasmid also can detect an imbalance between the cellular level of its replication protein, RepA, and plasmid-borne RepA binding sites to inhibit bacterial DNA replication and delay host cell division when RepA is in relative excess. We show that delayed cell division occurs by RepA-mediated induction of the SOS response and can be reversed by over-expression of the host DNA primase, DnaG. The effects of RepA excess are prevented by introducing a surfeit of RepA binding sites. The mechanism reported here may help to limit variation in plasmid copy number and allow repopulation of cells with plasmids when copy number falls--potentially pre-empting plasmid loss in cultures of dividing cells.     

Function of the N-terminal half of RepA in activation of Rts1 ori.

The RepA protein of the Rts1 plasmid, consisting of 288 amino acids, is a trans-acting protein essential for replication. A mutant repA gene, repA delta C143, carrying a deletion that removed the 143 C-terminal amino acids of RepA, could transform, but at a low frequency, an Escherichia coli polA strain, JG112, when repA delta C143 was cloned into pBR322 with Rts1 ori in the natural configuration. The transformation was less efficient without the dyad DnaA box in the ori region, and no transformation occurred at 42 degrees C, characteristic of Rts1 replication. A fusion of the 3'-terminal half of repA of the P1 plasmid to repA delta C143 yielded a pBR322 chimeric plasmid that contained Rts1 ori through hybrid (Rts1-P1) repA. This plasmid was maintained much more stably in JG112 at 37 degrees C. At 42 degrees C, however, it was quite unstable. The overproduced hybrid RepA protein showed interference with mini-Rts1 replication in trans and also exhibited an autorepressor function, although both activities were decreased. These findings suggest that the N-terminal half of the RepA molecule of Rts1 is involved in the activation of the replication origin.     

Control of replication in I-complex plasmids

The closely related plasmids that make up the I-complex group and the more distantly related IncL/M plasmids regulate the frequency of initiation of their replication by controlling the efficiency of translation of the rate limiting replication initiator protein, RepA. Translation initiation of repA is dependent on the formation of a pseudoknot immediately upstream of its Shine-Dalgarno sequence. Formation of this pseudoknot involves base pairing between two complementary sequences in the repA mRNA and requires that the secondary structure sequestering the distal sequence be disrupted by movement of the ribosome translating and terminating a leader peptide, whose coding sequence precedes and overlaps that of repA. Expression of repA is controlled by a small antisense RNA, RNAI, which on binding to its complementary target in the repA mRNA not only pre-empts formation of the pseudoknot, but also inhibits translation of the leader peptide. The requirement that translation of the leader peptide be completed for the pseudoknot to form increases the time available for the inhibitory interaction of RNAI with its target, so that at high copy number the frequency of pseudoknot formation is lowered, reducing the proportion of repA mRNA that are translated. At low copy number, when concentration of RNAI is low, repA is translated with increased frequency, leading to increased frequency of plasmid replication.     

Characterization of the IncW cryptic plasmid pXV2 from Xanthomonas campestris pv. vesicatoria

The gram-negative plant pathogen Xanthomonas campestris pv. vesicatoria strain Xv2 harbors an indigenous, cryptic plasmid pXV2 of 14.6 kb. This plasmid can only be maintained in Xanthomonas and is incapable of self-transmission. However, incompatibility testing classified it in IncW, a group containing the smallest number of naturally occurring, broad-host-range, conjugative plasmids. A pXV2 derivative containing only a 5.5-kb PstI fragment is stably maintained. Deletion of a 3.0-kb region from the PstI fragment causes a loss of plasmid stability. Nucleotide sequencing of the 2. 1-kb region essential for autonomous replication revealed a repA gene and a downstream noncoding region containing four iterons, two 17- and two 19-nt direct repeats, and an AT-rich region lying between the two sets of iterons. The sequence of the deduced RepA and the iterons shows homology to the RepA (39% identity) and the iterons, respectively, of the IncW plasmid pSa. Maxicell expression of the repA gene produced a protein of 35 kDa, a size similar to that deduced from the nucleotide sequence. Trans-complementation test confirmed that the repA gene and the iterons are indeed the essential elements for pXV2 replication.