Critical regions for assembly of vertebrate nonmuscle myosin II

Myosin II molecules assemble and form filaments through their C-terminal rod region, and the dynamic filament assembly-disassembly process of nonmuscle myosin II molecules is important for cellular activities. To estimate the critical region for filament formation of vertebrate nonmuscle myosin II, we assessed the solubility of a series of truncated recombinant rod fragments of nonmuscle myosin IIB at various concentrations of NaCl. A C-terminal 248-residue rod fragment (Asp 1729-Glu 1976) was shown by its solubility behavior to retain native assembly features, and two regions within it were found to be necessary for assembly: 35 amino acid residues from Asp 1729 to Thr 1763 and 39 amino acid residues from Ala 1875 to Ala 1913, the latter containing a sequence similar to the assembly competence domain (ACD) of skeletal muscle myosin. Fragments lacking either of the two regions were soluble at any NaCl concentration. We referred to these two regions as nonmuscle myosin ACD1 (nACD1) and nACD2, respectively. In addition, we constructed an alpha-helical coiled-coil model of the rod fragment, and found that a remarkable negative charge cluster (termed N1) and a positive charge cluster (termed P2) were present within nACD1 and nACD2, respectively, besides another positive charge cluster (termed P1) in the amino-terminal vicinity of nACD2. From these results, we propose two major electrostatic interactions that are essential for filament formation of nonmuscle myosin II: the antiparallel interaction between P2 and N1 which is essential for the nucleation step and the parallel interaction between P1 and N1 which is important for the elongation step.     

High Resolution Characterization of Myosin IIC Protein Tailpiece and Its Effect on Filament Assembly

The motor protein nonmuscle myosin II (NMII) must undergo dynamic oligomerization into filaments to perform its cellular functions. A small nonhelical region at the tail of the long coiled-coil region (tailpiece) is a common feature of all dynamically assembling myosin II proteins. This tailpiece is a key regulatory domain affecting NMII filament assembly properties and is subject to phosphorylation in vivo. We previously demonstrated that the positively charged region of the tailpiece binds to assembly-incompetent NMII-C fragments, inducing filament assembly. In the current study, we investigated the molecular mechanisms by which the tailpiece regulates NMII-C self-assembly. Using alanine scan, we found that specific positive and aromatic residues within the positively charged region of the tailpiece are important for inducing NMII-C filament assembly and for filament elongation. Combining peptide arrays with deletion studies allowed us to identify the tailpiece binding sites in the coiled-coil rod. Elucidation of the mechanism by which the tailpiece induces filament assembly permitted us further investigation into the role of tailpiece phosphorylation. Sedimentation and CD spectroscopy identified that phosphorylation of Thr¹⁹⁵⁷ or Thr¹⁹⁶⁰ inhibited the ability of the tailpiece to bind the coiled-coil rod and to induce NMII-C filament formation. This study provides molecular insight into the role of specific residues within the NMII-C tailpiece that are responsible for shifting the oligomeric equilibrium of NMII-C toward filament assembly and determining its morphology.     

Structure-function studies on Acanthamoeba myosins IA, IB, and II

Myosins IA and IB are globular proteins with only a single, short (for myosins) heavy chain (140,000 and 125,000 daltons for IA and IB, respectively) and are unable to form bipolar filaments. The amino acid sequence of IB heavy chain shows 55% similarity to muscle myosins in the N-terminal 670 residues, which contain the active sites, and a unique 500-residue C-terminus highly enriched in proline, glycine, and alanine. The C-terminal region contains a second actin-binding site which allows myosins IA and IB to cross-link actin filaments and support contractile activity. Myosins IA and IB are regulated solely by phosphorylation of one serine on the heavy chain positioned between the catalytic site and the actin-binding site that activates ATPase. Myosin II is a more conventional myosin in composition (two heavy chains and two pairs of light chains), heavy chain sequence (globular head 45% identical to muscle myosins and a coiled-coil helical tail), and structure (bipolar filaments). The tail of myosin II is much shorter than that of other conventional myosins, and it contains a 25 amino acid sequence in which helical structure is predicted to be weak or absent. The position of this sequence corresponds to the position of a bend in the monomer. Myosin II heavy chains also have a 29-residue nonhelical tailpiece which contains three regulatory, phosphorylatable serines. Phosphorylation at the tip of the tail regulates ATPase activity in the globular head apparently through an effect on filament structure.     

Complete nucleotide sequence and deduced polypeptide sequence of a nonmuscle myosin heavy chain gene from Acanthamoeba: evidence of a hinge in the rodlike tail

We have completely sequenced a gene encoding the heavy chain of myosin II, a nonmuscle myosin from the soil ameba Acanthamoeba castellanii. The gene spans 6 kb, is split by three small introns, and encodes a 1,509-residue heavy chain polypeptide. The positions of the three introns are largely conserved relative to characterized vertebrate and invertebrate muscle myosin genes. The deduced myosin II globular head amino acid sequence shows a high degree of similarity with the globular head sequences of the rat embryonic skeletal muscle and nematode unc 54 muscle myosins. By contrast, there is no unique way to align the deduced myosin II rod amino acid sequence with the rod sequence of these muscle myosins. Nevertheless, the periodicities of hydrophobic and charged residues in the myosin II rod sequence, which dictate the coiled-coil structure of the rod and its associations within the myosin filament, are very similar to those of the muscle myosins. We conclude that this ameba nonmuscle myosin shares with the muscle myosins of vertebrates and invertebrates an ancestral heavy chain gene. The low level of direct sequence similarity between the rod sequences of myosin II and muscle myosins probably reflects a general tolerance for residue changes in the rod domain (as long as the periodicities of hydrophobic and charged residues are largely maintained), the relative evolutionary "ages" of these myosins, and specific differences between the filament properties of myosin II and muscle myosins. Finally, sequence analysis and electron microscopy reveal the presence within the myosin II rodlike tail of a well-defined hinge region where sharp bending can occur. We speculate that this hinge may play a key role in mediating the effect of heavy chain phosphorylation on enzymatic activity.     

Filament-dependent and -independent localization modes of Drosophila non-muscle myosin II

Myosin II assembles into force-generating filaments that drive cytokinesis and the organization of the cell cortex. Regulation of myosin II activity can occur through modulation of filament assembly and by targeting to appropriate cellular sites. Here we show, using salt-dependent solubility and a novel fluorescence resonance energy transfer assay, that assembly of the Drosophila non-muscle myosin II heavy chain, zipper, is mediated by a 90-residue region (1849-1940) of the coiled-coil tail domain. This filament assembly domain, transiently expressed in Drosophila S2 cells, does not localize to the interphase cortex or the cytokinetic cleavage furrow, whereas a 500-residue region (1350-1865) that overlaps the NH(2) terminus of the assembly domain localizes to the interphase cortex but not the cytokinetic cleavage furrow. Targeting to these two sites appears to utilize distinct localization mechanisms as the assembly domain is required for cleavage furrow recruitment of a truncated coiled-coil tail region but not targeting to the interphase cortex. These results delineate the requirements for zipper filament assembly and indicate that the ability to form filaments is necessary for targeting to the cleavage furrow but not to the interphase cortex.     

Actin activation of myosin heavy chain kinase A in Dictyostelium: a biochemical mechanism for the spatial regulation of myosin II filament disassembly

Studies in Dictyostelium discoideum have established that the cycle of myosin II bipolar filament assembly and disassembly controls the temporal and spatial localization of myosin II during critical cellular processes, such as cytokinesis and cell locomotion. Myosin heavy chain kinase A (MHCK A) is a key enzyme regulating myosin II filament disassembly through myosin heavy chain phosphorylation in Dictyostelium. Under various cellular conditions, MHCK A is recruited to actin-rich cortical sites and is preferentially enriched at sites of pseudopod formation, and thus MHCK A is proposed to play a role in regulating localized disassembly of myosin II filaments in the cell. MHCK A possesses an aminoterminal coiled-coil domain that participates in the oligomerization, cellular localization, and actin binding activities of the kinase. In the current study, we show that the interaction between the coiled-coil domain of MHCK A and filamentous actin leads to an approximately 40-fold increase in the initial rate of kinase catalytic activity. Actin-mediated activation of MHCK A involves increased rates of kinase autophosphorylation and requires the presence of the coiled-coil domain. Structure-function analyses revealed that the coiled-coil domain alone binds to actin filaments (apparent K(D) = 0.9 microm) and thus mediates the direct interaction with F-actin required for MHCK A activation. Collectively, these results indicate that MHCK A recruitment to actin-rich sites could lead to localized activation of the kinase via direct interaction with actin filaments, and thus this mode of kinase regulation may represent an important mechanism by which the cell achieves localized disassembly of myosin II filaments required for specific changes in cell shape.     

Differential requirement for the nonhelical tailpiece and the C terminus of the myosin rod in Caenorhabditis elegans muscle

Myosin heavy chain (MHC) is a large, multidomain protein important for both cellular structure and contraction. To examine the functional role of two C-terminal domains, the end of the coiled-coil rod and the nonhelical tailpiece, we have generated constructs in which residues within these domains are removed or mutated, and examined their behavior in Caenorhabditis elegans striated muscle. Genetic tests demonstrate that MHC lacking only tailpiece residues is competent to support the timely onset of embryonic contractions, and therefore viability, in animals lacking full-length MHC. Antibody staining experiments show that this truncated molecule localizes as wild type in early stages of development, but may be defective in processes important for thick filament organization later in embryogenesis. Ultrastructural analysis reveals thick filaments of normal morphology in disorganized arrangement, as well as occasional abnormal assemblages. In contrast, molecules in which the four terminal residues of the coiled coil are absent or mutated fail to rescue animals lacking endogenous MHC. Loss of these four residues is associated with delayed protein localization and delayed contractile function during early embryogenesis. Our results suggest that these two MHC domains, the rod and the tailpiece, are required for distinct steps during muscle development.     

The predicted coiled-coil domain of myosin 10 forms a novel elongated domain that lengthens the head

Myosin 10 contains a region of predicted coiled coil 120 residues long. However, the highly charged nature and pattern of charges in the proximal 36 residues appear incompatible with coiled-coil formation. Circular dichroism, NMR, and analytical ultracentrifugation show that a synthesized peptide containing this region forms a stable single alpha-helix (SAH) domain in solution and does not dimerize to form a coiled coil even at millimolar concentrations. Additionally, electron microscopy of a recombinant myosin 10 containing the motor, the three calmodulin binding domains, and the full-length predicted coiled coil showed that it was mostly monomeric at physiological protein concentration. In dimers the molecules were joined only at their extreme distal ends, and no coiled-coil tail was visible. Furthermore, the neck lengths of both monomers and dimers were much longer than expected from the number of calmodulin binding domains. In contrast, micrographs of myosin 5 heavy meromyosin obtained under the same conditions clearly showed a coiled-coil tail, and the necks were the predicted length. Thus the predicted coiled coil of myosin 10 forms a novel elongated structure in which the proximal region is a SAH domain and the distal region is a SAH domain (or has an unknown extended structure) that dimerizes only at its end. Sequence comparisons show that similar structures may exist in the predicted coiled-coil domains of myosins 6 and 7a and MyoM and could function to increase the size of the working stroke.     

Regulation of the actin-activated ATPase activity of Acanthamoeba myosin II by copolymerization with phosphorylated and dephosphorylated peptides derived from the carboxyl-terminal end of the heavy chain

Myosin II from Acanthamoeba castellanii is a conventional myosin composed of two heavy chains and two pairs of light chains. The amino-terminal approximately 90 kDa of each heavy chain form a globular head that contains the ATPase site and an ATP-sensitive actin-binding site. The carboxyl-terminal approximately 80 kDa of both heavy chains interact to form a coiled coil, helical rod (through which the molecules self-associate into bipolar filaments) ending in a short nonhelical tailpiece. Phosphorylation of 3 serine residues at the tip of the tail (at positions 11, 16, and 21 from the carboxyl terminus) inactivates the actin-activated Mg2(+)-ATPase activity of myosin II filaments. Previous work had indicated that the activity of each myosin II molecule in a filament reflects the global state of phosphorylation of the filament rather than the phosphorylation state of the molecule itself. We have now purified the approximately 28-kDa carboxyl-terminal region of the heavy chain lacking the last two phosphorylation sites, and we have shown that this peptide copolymerizes with and regulates the actin-activated Mg2(+)-ATPase activities of native dephosphorylated and phosphorylated myosin II. It can be concluded from these studies that the biologically relevant enzymatic activity of myosin II is regulated by a phosphorylation-dependent conformational change in the myosin filaments.     

Identification of functional regions on the tail of Acanthamoeba myosin- II using recombinant fusion proteins. II. Assembly properties of tails with NH2- and COOH-terminal deletions

We used purified fusion proteins containing parts of the Acanthamoeba myosin-II tail to localize those regions of the tail responsible for each of the three steps in the successive dimerization mechanism (Sinard, J. H., W. F. Stafford, and T. D. Pollard. 1989. J. Cell Biol. 107:1537-1547) for Acanthamoeba myosin-II minifiliment assembly. Fusion proteins containing the terminal approximately 90% of the myosin-II tail assemble normally, but deletions within the last 100 amino acids of the tail sequence alter or prevent assembly. The first step in minifilament assembly, formation of antiparallel dimers, requires the COOH-terminal approximately 30 amino acids that are thought to form a nonhelical domain at the end of the coiled-coil. The second step, formation of antiparallel tetramers, requires the last approximately 40 residues in the coiled-coil. The final step, the association of two antiparallel tetramers to form the completed octameric minifilament, requires residues approximately 40-70 from the end of the coiled-coil. A region of the tail near the junction with the heads is important for tight packing of the tails in the minifilaments. Divalent cations induce the lateral aggregation of minifilaments formed from native myosin-II or fusion proteins containing a nonmyosin "head," but under the same conditions fusion proteins composed essentially only of myosin tail sequences with very little nonmyosin sequences form paracrystals. The region of the tail necessary for this paracrystal formation lies NH2-terminal to amino acid residue 1,468 in the native myosin-II sequence.     

The globular tail domain of myosin Va functions as an inhibitor of the myosin Va motor

The actin-activated ATPase activity of full-length mammalian myosin Va is well regulated by Ca2+, whereas that of truncated myosin Va without the C-terminal globular tail domain (GTD) is not. Here, we have found that exogenous GTD is capable of inhibiting the actin-activated ATPase activity of GTD-deleted myosin Va. A series of truncated constructs of myosin Va further showed that the entire length of the first coiled-coil (coil-1) of the tail domain is critical for GTD-dependent regulation of myosin Va and that deletion of 58 residues from the C-terminal end of coil-1 markedly hampered regulation. Negative staining electron microscopy revealed that GTD-deleted myosin Va formed a "Y"-shaped structure, which was converted to a triangular shape, similar to the structure of full-length myosin Va in the inhibited state, by addition of exogenous GTD. In contrast, the triangular shape was not observed when the C-terminal 58 residues of coil-1 were deleted, even in the presence of exogenous GTD. Based on these results, we propose a model for the formation of the inhibited state of myosin Va. GTD binds to the C-terminal end of coil-1. The neck-tail junction of myosin Va is flexible, and the long neck enables the head domain to reach the GTD associated with the end of coil-1. Once the head interacts with the GTD, the triangular inhibited conformation is stabilized. Consistent with this model, we found that shortening of the neck of myosin Va by two IQ motifs abolished the regulation by GTD, whereas regulation was partially restored by shortening of coil-1 by an amount comparable to that of the two IQ motifs.     

The expression pattern and cellular localisation of Myosin VI during the Drosophila melanogaster life cycle

Myosin VI is a motor protein which is necessary for the morphogenesis of epithelial tissues during Drosophila development. The spatial and temporal expression of Myosin VI was examined by expressing a GFP (Green Fluorescent Protein) tagged Myosin VI molecule (PGM), under the control of a Myosin VI-Gal4 line. PGM was present in tissues that were shown previously to express Myosin VI, such as the ovarian follicle epithelium, and the individualization complex; and in other tissues, including the trachea, the midgut, the salivary glands and the imaginal discs. The GFP-tagged Myosin V1 rescued the male sterile phenotype of Jaguar showing it is functional in vivo. Within individual cells, the role of the head and neck domain and the tail domain in targeting of the Myosin V1 molecule was examined by investigating the localisation of the separate domains tagged to GFP. In salivary glands and follicle cells the head and neck domains were concentrated in the cell nucleus, where the minus end of each actin filament is located. We found that the tail domain anchors the whole molecule outside of the nucleus. Similarly, in the individualization complex in the testes, the tail anchors the whole molecule to the base of the complex while the separated head with neck domain becomes scattered along the entire actin molecule suggesting the cellular location may be determined by cargo proteins that bind to the tail domain rather than by the movement of Myosin VI along the actin filaments.     

Complete primary structure of a scallop striated muscle myosin heavy chain. Sequence comparison with other heavy chains reveals regions that might be critical for regulation

We have determined the primary structure of the myosin heavy chain (MHC) of the striated adductor muscle of the scallop Aequipecten irradians by cloning and sequencing its cDNA. It is the first heavy chain sequence obtained in a directly Ca(2+)-regulated myosin. The 1938-amino acid sequence has an overall structure similar to other MHCs. The subfragment-1 region of the scallop MHC has a 59-62% sequence identity with sarcomeric and a 52-53% identity with nonsarcomeric (smooth and metazoan nonmuscle) MHCs. The heavy chain component of the regulatory domain (Kwon, H., Goodwin, E. B., Nyitray, L., Berliner, E., O'Neall-Hennessey, E., Melandri, F. D., and Szent-Gy?rgyi, A. G. (1990) Proc. Natl. Acad. Sci. U.S.A. 87, 4771-4775) starts at either Leu-755 or Val-760. Ca(2+)-sensitive Trp residues (Wells, C., Warriner, K. E., and Bagshaw, C. R. (1985) Biochem. J. 231, 31-38) are located near the C-terminal end of this segment (residues 818-827). More detailed sequence comparison with other MHCs reveals that the 50-kDa domain and the N-terminal two-thirds of the 20-kDa domain differ substantially between sarcomeric and nonsarcomeric myosins. In contrast, in the light chain binding region of the regulatory domain (residues 784-844) the scallop sequence shows greater homology with regulated myosins (smooth muscle, nonmuscle, and invertebrate striated muscles) than with unregulated ones (vertebrate skeletal and heart muscles). The N-terminal 25-kDa domain also contains several residues which are preserved only in regulated myosins. These results indicate that certain heavy chain sites might be critical for regulation. The rod has features typical of sarcomeric myosins. It is 52-60% and 30-33% homologous with sarcomeric and nonsarcomeric MHCs, respectively. A Ser-rich tailpiece (residues 1918-1938) is apparently nonhelical.     

The N-terminal domain of MYO18A has an ATP-insensitive actin-binding site

Myosin XVIII is the recently identified 18th class of myosins, and its members are composed of a unique N-terminal domain, a motor domain with an unusual sequence around the ATPase site, one IQ motif, a segmented coiled-coil region for dimerization, and a C-terminal globular tail. To gain insight into the functions of this unique myosin, we characterized its human homologue, MYO18A, focusing on the functional roles of the characteristic N-terminal domain that contains a PDZ module known to mediate protein-protein interaction. GFP-tagged full-length and C-terminally truncated MYO18A molecules that were expressed in HeLa cells exhibited colocalization with actin filaments. Chemical cross-linking of these molecules showed that they form stable dimers as expected from their putative coiled-coil tails. Cosedimentation of the various types of truncated MYO18A constructs with actin filaments indicated the presence of an ATP-insensitive actin-binding site in the N-terminal domain. Further studies on truncated constructs of the N-terminal domain indicated that this actin-binding site is located outside the PDZ module, but within the middle region of this domain, which does not show any homology with the known actin-binding motifs. These results imply that this dimeric myosin might stably cross-link actin filaments by two ATP-insensitive actin-binding sites at the N-terminal domains for higher-order organization of the actin cytoskeleton.     

Myosin II isoforms in smooth muscle: heterogeneity and function

Both smooth muscle (SM) and nonmuscle class II myosin molecules are expressed in SM tissues comprising hollow organ systems. Individual SM cells may express one or more of multiple myosin II isoforms that differ in myosin heavy chain (MHC) and myosin light chain (MLC) subunits. Although much has been learned, the expression profiles, organization within contractile filaments, localization within cells, and precise roles in various contractile functions of these different myosin molecules are still not well understood. However, data supporting unique physiological roles for certain isoforms continues to build. Isoform differences located in the S1 head region of the MHC can alter actin binding and rates of ATP hydrolysis. Differences located in the MHC tail can alter the formation, stability, and size of the myosin thick filament. In these distinct ways, both head and tail isoform differences can alter force generation and muscle shortening velocities. The MLCs that are associated with the lever arm of the S1 head can affect the flexibility and range of motion of this domain and possibly the motion of the S2 and motor domains. Phosphorylation of MLC(20) has been associated with conformational changes in the S1 and/or S2 fragments regulating enzymatic activity of the entire myosin molecule. A challenge for the future will be delineation of the physiological significance of the heterogeneous expression of these isoforms in developmental, tissue-specific, and species-specific patterns and or the intra- and intercellular heterogeneity of myosin isoform expression in SM cells of a given organ.     

Myosin VI isoform localized to clathrin-coated vesicles with a role in clathrin-mediated endocytosis.

Myosin VI is involved in membrane traffic and dynamics and is the only myosin known to move towards the minus end of actin filaments. Splice variants of myosin VI with a large insert in the tail domain were specifically expressed in polarized cells containing microvilli. In these polarized cells, endogenous myosin VI containing the large insert was concentrated at the apical domain co-localizing with clathrin- coated pits/vesicles. Using full-length myosin VI and deletion mutants tagged with green fluorescent protein (GFP) we have shown that myosin VI associates and co-localizes with clathrin-coated pits/vesicles by its C-terminal tail. Myosin VI, precipitated from whole cytosol, was present in a protein complex containing adaptor protein (AP)-2 and clathrin, and enriched in purified clathrin-coated vesicles. Over-expression of the tail domain of myosin VI containing the large insert in fibroblasts reduced transferrin uptake in transiently and stably transfected cells by >50%. Myosin VI is the first motor protein to be identified associated with clathrin-coated pits/vesicles and shown to modulate clathrin-mediated endocytosis.     

GFP-tagged regulatory light chain monitors single myosin lever-arm orientation in a muscle fiber

Myosin is the molecular motor in muscle-binding actin and executing a power stroke by rotating its lever arm through an angle of approximately 70 degrees to translate actin against resistive force. A green fluorescent protein (GFP)-tagged human cardiac myosin regulatory light chain (HCRLC) was constructed to study in situ lever arm orientation one molecule at a time by polarized fluorescence emitted from the GFP probe. The recombinant protein physically and functionally replaced the native RLC on myosin lever arms in the thick filaments of permeabilized skeletal muscle fibers. Detecting single molecules in fibers where myosin concentration reaches 300 microM is accomplished using total internal reflection fluorescence microscopy. With total internal reflection fluorescence, evanescent field excitation, supercritical angle fluorescence detection, and CCD detector pixel size limits detection volume to just a few attoliters. Data analysis manages both the perturbing effect of the TIR interface on probe emission and the effect of high numerical aperture collection of light. The natural myosin concentration gradient in a muscle fiber allows observation of fluorescence polarization from C-term GFP-tagged HCRLC exchanged myosin from regions in the thick filament containing low and high myosin concentrations. In rigor, cross-bridges at low concentration at the end of the thick filament maintain GFP dipole moments at two distinct polar angles relative to the fiber symmetry axis. The lower angle, where the dipole is nearly parallel to fiber axis, is more highly populated than the alternative, larger angle. Cross-bridges at higher concentration in the center of the thick filament are oriented in a homogeneous band at approximately 45 degrees to the fiber axis. The data suggests molecular crowding impacts myosin conformation, implying mutual interactions between cross-bridges alter how the muscle generates force. The GFP-tagged RLC is a novel probe to assess single-lever-arm orientation characteristics in situ.     

Proteasomal activity modulates TGF-ss signaling in a gene-specific manner

Myosin heavy chain kinase A (MHCK A) modulates myosin II filament assembly in the amoeba Dictyostelium discoideum. MHCK A localization in vivo is dynamically regulated during chemotaxis, phagocytosis, and other polarized cell motility events, with preferential recruitment into anterior filamentous actin (F-actin)-rich structures. The current work reveals that an amino-terminal segment of MHCK A, previously identified as forming a coiled-coil, mediates anterior localization. MHCK A co-sediments with F-actin, and deletion of the amino-terminal domain eliminated actin binding. These results indicate that the anterior localization of MHCK A is mediated via direct binding to F-actin, and reveal the presence of an actin-binding function not previously detected by primary sequence evaluation of the coiled-coil domain.     

Registration of the rod is not critical for the phosphorylation-dependent regulation of smooth muscle myosin.

A recent report has suggested that the interaction between the head and the rod region of smooth muscle myosin at S2 is important for the phosphorylation-mediated regulation of myosin motor activity [Trybus, K. M., Freyzon, Y., Faust, L. Z., and Sweeney, H. L. (1997) Proc. Natl. Acad. Sci. U.S.A. 74, 48-52]. To investigate whether specific amino acid residues at S2 or whether the registration of the 7-residue/28-residue repeat appearing in the alpha-helical coiled-coil structure of the rod are critical for such an interaction, two smooth muscle myosin mutants were constructed in which the N-terminal sequences of S2 were deleted to various extents. One mutant contained a deletion of 71 residues at the position immediately C-terminal to the invariant proline (Pro849) linking the S1 domain directly to the downstream sequence of the rod, while in another mutant, 53 residues were deleted at a position 56 residues downstream of Pro849. Despite these alterations which change the registration of both the 28-residue repeat and the 7-residue repeat found in myosin rod sequence, both myosin mutants showed a stable double-headed structure by electron microscopic observation. Both the actin-activated ATPase activity and the actin translocating activity of the mutants were completely regulated by the phosphorylation of the regulatory light chain. The actin sliding velocity of the two mutant myosins was the same as the wild-type recombinant myosin. Furthermore, the head configuration critical for myosin filament formation (extended or folded) was unchanged in either mutant. These results indicate that neither the specific amino acid residues nor the registration of the amino acid repeat in S2 is critical for the head configuration. These results indicate that neither a specific amino acid sequence at the head-rod junction nor the rod sequence registration is critical for the regulation of smooth muscle myosin.     

Myosin heavy chain kinase B participates in the regulation of myosin assembly into the cytoskeleton

Myosin II plays critical roles in events such as cytokinesis, chemotactic migration, and morphological changes during multicellular development. The amoeba Dictyostelium discoideum provides a simple system for the study of this contractile protein. In this system, myosin II filament assembly is regulated by myosin heavy chain (MHC) phosphorylation in the tail region of the molecule. Earlier studies identified an alpha-kinase, MHC kinase A (MHCK A), which phosphorylates three mapped threonine residues in the myosin tail, driving myosin disassembly. Using molecular and genomic approaches, we have identified a series of related kinases in Dictyostelium. The enzyme MHCK B shares with MHCK A a domain organization that includes a highly novel catalytic domain coupled to a carboxyl-terminal WD repeat domain. We have engineered, expressed, and purified a FLAG-tagged version of the novel kinase. In the present study, we report detailed biochemical and cellular studies documenting that MHCK B plays a physiological role in the control of Dictyostelium myosin II assembly and disassembly during the vegetative life of Dictyostelium amoebae. The presented data supports a model of multiple related MHCKs in this system, with different regulatory mechanisms and pathways controlling each enzyme.