The affinity of phospholipase A2 for the interface of the substrate and analogs

In the intravesicle scooting mode of interfacial catalysis, the interfacial complex E*S is formed by the interaction of the membrane bound phospholipase A2 (E*) with the substrate monomer (S) in the interface. In the presence of nonhydrolyzable substrate analogs (I) the kinetics of interfacial catalysis is modified. If phospholipase A2 is added to a mixture of the vesicles of L-DMPMe ester and of DTPMe ether or D-DMPMe ester, the extent of hydrolysis, A, decreases and the interfacial scooting rate constant, ki, remains unchanged. On the other hand, when the enzyme is added to the vesicles prepared from premixed L-DMPMe ester with D-DMPMe ester or L-DTPMe ether, ki decreases but A remains constant. Qualitatively, these results are in excellent accord with the Scheme I for interfacial catalysis. However, a quantitative departure has been noted, which suggests that the interfacial dissociation constant for E*S is larger than that for E*I. These results are interpreted to suggest that the catalytic rate constant for decomposition of E*S to E* + P is larger than the rate constant for decomposition of E*S to E* + S. Broader implications of the scooting mode of interfacial catalysis are discussed.     

Kinetics of the hydrolysis of N-benzoyl-l-serine methyl ester catalysed by bromelain and by papain. Analysis of modifier mechanisms by lattice nomography, computational methods of parameter evaluation for substrate-activated catalyses and consequences of postulated non-productive binding in bromelain- and papain-catalysed hydrolyses

1. N-Benzoyl-l-serine methyl ester was synthesized and evaluated as a substrate for bromelain (EC 3.4.22.4) and for papain (EC 3.4.22.2). 2. For the bromelain-catalysed hydrolysis at pH7.0, plots of [S(0)]/v(i) (initial substrate concn./initial velocity) versus [S(0)] are markedly curved, concave downwards. 3. Analysis by lattice nomography of a modifier kinetic mechanism in which the modifier is substrate reveals that concave-down [S(0)]/v(i) versus [S(0)] plots can arise when the ratio of the rate constants that characterize the breakdown of the binary (ES) and ternary (SES) complexes is either less than or greater than 1. In the latter case, there are severe restrictions on the values that may be taken by the ratio of the dissociation constants of the productive and non-productive binary complexes. 4. Concave-down [S(0)]/v(i) versus [S(0)] plots cannot arise from compulsory substrate activation. 5. Computational methods, based on function minimization, for determination of the apparent parameters that characterize a non-compulsory substrate-activated catalysis are described. 6. In an attempt to interpret the catalysis by bromelain of the hydrolysis of N-benzoyl-l-serine methyl ester in terms of substrate activation, the general substrate-activation model was simplified to one in which only one binary ES complex (that which gives rise directly to products) can form. 7. In terms of this model, the bromelain-catalysed hydrolysis of N-benzoyl-l-serine methyl ester at pH7.0, I=0.1 and 25 degrees C is characterized by K(m) (1) (the dissociation constant of ES)=1.22+/-0.73mm, k (the rate constant for the breakdown of ES to E+products, P)=1.57x10(-2)+/-0.32x10(-2)s(-1), K(a) (2) (the dissociation constant that characterizes the breakdown of SES to ES and S)=0.38+/-0.06m, and k' (the rate constant for the breakdown of SES to E+P+S)=0.45+/-0.04s(-1). 8. These parameters are compared with those in the literature that characterize the bromelain-catalysed hydrolysis of alpha-N-benzoyl-l-arginine ethyl ester and of alpha-N-benzoyl-l-arginine amide; K(m) (1) and k for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine amide hydrolysis and K(as) and k' for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine ester hydrolysis. 9. A previous interpretation of the inter-relationships of the values of k(cat.) and K(m) for the bromelain-catalysed hydrolysis of the arginine ester and amide substrates is discussed critically and an alternative interpretation involving substantial non-productive binding of the arginine amide substrate to bromelain is suggested. 10. The parameters for the bromelain-catalysed hydrolysis of the serine ester substrate are tentatively interpreted in terms of non-productive binding in the binary complex and a decrease of this type of binding by ternary complex-formation. 11. The Michaelis parameters for the papain-catalysed hydrolysis of the serine ester substrate (K(m)=52+/-4mm, k(cat.)=2.80+/-0.1s(-1) at pH7.0, I=0.1, 25.0 degrees C) are similar to those for the papain-catalysed hydrolysis of methyl hippurate. 12. Urea and guanidine hydrochloride at concentrations of 1m have only small effects on the kinetic parameters for the hydrolysis of the serine ester substrate catalysed by bromelain and by papain.     

Interactions of derivatives of guanidinophenylalanine and guanidinophenylglycine with Streptomyces griseus trypsin

The rates of hydrolysis of the ester, amide and anilide substrates of p-guanidino-L-phenylalanine (GPA) by Streptomyces griseus trypsin (S. griseus trypsin) were compared with those of arginine (Arg) substrates. The specificity constant (kcat/km) for the hydrolysis of GPA substrates by the enzyme was 2-3-times lower than that for arginine substrates. The kcat and Km values for the hydrolysis of N alpha-benzoyl-p-guanidino-L-phenylalanine ethyl ester (Bz-GPA-OEt) by S. griseus trypsin are in the same order of magnitude as those of N alpha-benzoyl-L-arginine ethyl ester (Bz-Arg-OEt), although both values for the former when hydrolyzed by bovine trypsin are higher by one order of magnitude than those for the latter. The specificity constant for the hydrolysis of Bz-GPA-OEt by S. griseus trypsin is much higher than that for N alpha-benzoyl-p-guanidino-L-phenylglycine ethyl ester (Bz-GPG-OEt). As with the kinetic behavior of bovine trypsin, low values in Km and kcat were observed for the hydrolysis of amide and anilide substrates of GPA by S. griseus trypsin compared with those of arginine substrates. The rates of hydrolysis of GPA and arginine substrates by S. griseus trypsin are about 2- to 62-times higher than those obtained by bovine trypsin. Substrate activation was observed with S. griseus trypsin in the hydrolysis of Bz-GPA-OEt as well as Bz-Arg-OEt, whereas substrate inhibition was observed in three kinds of N alpha-protected anilide substrates of GPA and arginine. In contrast, no activation by the amide substrate of GPA could be detected with this enzyme.     

The aminopeptidase from Aeromonas proteolytica can function as an esterase

The aminopeptidase from Aeromonas proteolytica (AAP) can catalyze the hydrolysis of L-leucine ethyl ester ( L-Leu-OEt) with a rate of 96 +/- 5 s-1 and a Km of 700 microM. The observed turnover number for L-Leu-OEt hydrolysis by AAP is similar to that observed for peptide hydrolysis, which is 67 +/- 5 s-1. The k(cat) values for the hydrolysis of L-Leu-OEt and L-leucine- p-nitroanilide ( L- pNA) catalyzed by AAP were determined at different pH values under saturating substrate concentrations. Construction of an Arrhenius plot from the temperature dependence of AAP-catalyzed ester hydrolysis indicates that the rate-limiting step does not change as a function of temperature and is product formation. The activation energy ( Ea) for the activated ES ester complex is 13.7 kJ mol-1, while the enthalpy and entropy of activation at 25 degrees C calculated over the temperature range 298-338 K are 11.2 kJ mol-1 and -175 J K-1 mol-1, respectively. The free energy of activation at 25 degrees C was found to be 63.4 kJ mol-1. The enthalpy of ionization was also measured and was found to be very similar for both peptide and ester substrates, yielding values of 20 kJ mol-1 for L-Leu-OEt and 25 kJ mol-1 for L- pNA. For peptide and L-amino acid ester cleavage reactions catalyzed by AAP, and 6.07, respectively. Proton inventory data suggest that two protons are transferred in the rate-limiting step of ester hydrolysis while only one is transferred in peptide hydrolysis. The combination of these data with the available X-ray crystallographic, kinetic, spectroscopic, and thermodynamic data for AAP provides new insight into the catalytic mechanism of AAP.     

Mechanism of Carboxypeptidase Y Catalyzed Hydrolysis and Aminolysis Reactions

The reaction mechanism of carboxypeptidase Y catalyzed reactions is investigated. Presteady state and steady state kinetic measurements are performed on the hydrolysis and aminolysis of an ester and an amide substrate. It is found that deacylation is the rate determining step in hydrolysis of the ester, pivalic acid 4-nitrophenol and acylation in that of the amide, succinyl-L-alanyl-L-alalyl-L-propyl-L-phenylalanine 4-nitroanilide.

The kinetic effects observed in the presence of a nucleophile, L-valine amide, where aminolysis occurs in parallel to the hydrolysis reaction are analysed in details. The results are described satisfactorily by a reaction scheme which involves the binding of the added nucleophile, (i) to the free enzyme, resulting in a simple competitive effect, and (ii) to the acyl-enzyme with the formation of a complex between the enzyme and the aminolysis product, the dissociation of which is rate determining. That scheme can account for both increases and decreases of kinetic parameter values as a function of the nucleophile concentration. There is no indication of binding of the nucleophile to the enzyme-substrate complex before acylation takes place.     

Reaction of lecithin cholesterol acyltransferase with water-soluble substrates

To separate the interfacial and catalytic reactions of lecithin cholesterol acyltransferase (LCAT), we carried out the first investigation of its reaction with water-soluble substrates. We used a continuous spectrophotometric assay for the hydrolysis of p-nitrophenyl esters of fatty acids to determine the chain length specificity of the enzyme and its modulation by anions and apolipoproteins in solution. By chemical modification of amino acid residues, we demonstrated that the active site serine and histidine residues participate in both the esterase and acyltransferase reactions but that cysteine residues are not involved in the esterase reaction. The kinetics of the LCAT reaction were measured for p-nitrophenyl esters of fatty acids having up to six (C-6) carbons in length. With increasing acyl chain lengths the optimal reaction rates occurred for the C-5 ester and Km and Vmax values decreased progressively, while the specificity constant, kcat/Km, increased. The same series of substrates and longer chain esters, up to C-16, were also reacted with LCAT in the presence of Triton X-100 in order to determine the general trends for the reaction rates as a function of chain length. The observed trends for the reaction rates and kinetic constants were attributed to an increasing binding affinity for the longer acyl chains in a large hydrophobic cavity, with a concomitant restriction in the motions of the substrates and a decreased probability for the correct positioning of the ester bond for hydrolysis, resulting in a decreased substrate turnover. Since the kinetics of the interfacial reactions of LCAT are very sensitive to the presence of anions and apolipoproteins, in particular apoA-I, we investigated the effects of these modulators on the reactions of LCAT in solution. Unlike the interfacial reactions, the hydrolysis of the p-nitrophenyl esters was not affected by 0.1 M concentrations of anions nor by water-soluble apolipoproteins (apoA-I, apoA-II, and apoCs). Thus the regulation of the activity of LCAT is mediated largely by the interfaces on which it acts.     

Steady-state and pre-steady-state kinetic evaluation of severe acute respiratory syndrome coronavirus (SARS-CoV) 3CLpro cysteine protease: development of an ion-pair model for catalysis

Severe acute respiratory syndrome (SARS) was a worldwide epidemic caused by a coronavirus that has a cysteine protease (3CLpro) essential to its life cycle. Steady-state and pre-steady-state kinetic methods were used with highly active 3CLpro to characterize the reaction mechanism. We show that 3CLpro has mechanistic features common and disparate to the archetypical proteases papain and chymotrypsin. The kinetic mechanism for 3CLpro-mediated ester hydrolysis, including the individual rate constants, is consistent with a simple double displacement mechanism. The pre-steady-state burst rate was independent of ester substrate concentration indicating a high commitment to catalysis. When homologous peptidic amide and ester substrates were compared, a series of interesting observations emerged. Despite a 2000-fold difference in nonenzymatic reactivity, highly related amide and ester substrates were found to have similar kinetic parameters in both the steady-state and pre-steady-state. Steady-state solvent isotope effect (SIE) studies showed an inverse SIE for the amide but not ester substrates. Evaluation of the SIE in the pre-steady-state revealed normal SIEs for both amide and ester burst rates. Proton inventory (PI) studies on amide peptide hydrolysis were consistent with two proton-transfer reactions in the transition state while the ester data was consistent with a single proton-transfer reaction. Finally, the pH-inactivation profile of 3CLpro with iodoacetamide is indicative of an ion-pair mechanism. Taken together, the data are consistent with a 3CLpro mechanism that utilizes an "electrostatic" trigger to initiate the acylation reaction, a cysteine-histidine catalytic dyad ion pair, an enzyme-facilitated release of P1, and a general base-catalyzed deacylation reaction.     

Membrane-bound plasma platelet activating factor acetylhydrolase acts on substrate in the aqueous phase.

Human plasma platelet activating factor acetylhydrolase (pPAF-AH) is a phospholipase A(2) that specifically hydrolyzes the sn-2 ester of platelet activating factor (PAF) and of phospholipids with oxidatively truncated sn-2 fatty acyl chains. pPAF-AH is bound to lipoproteins in vivo, and it binds essentially irreversibly to anionic and zwitterionic phospholipid vesicles in vitro and hydrolyzes PAF and PAF analogues. Substrate hydrolysis also occurs in the absence of vesicles, with a maximum rate reached at the critical micelle concentration. A novel pre-steady-state kinetic analysis with enzyme tightly bound to vesicles and with a substrate that undergoes slow intervesicle exchange establishes that pPAF-AH accesses its substrate from the aqueous phase and thus is not an interfacial enzyme. Such a mechanism readily explains why this enzyme displays dramatic specificity for phospholipids with short sn-2 chains or with medium-length, oxidatively truncated sn-2 chains since a common feature of these lipids is their relatively high water solubility. It also explains why the enzymatic rate drops as the length of the sn-1 chain is increased. pPAF-AH shows broad specificity toward phospholipids with different polar headgroups. Additional results are that PAF undergoes intervesicle exchange on the subminute time scale and it does not undergo transbilayer movement over tens of minutes.     

Kinetic studies of the urokinase catalysed conversion of NH2-terminal lysine plasminogen to plasmin.

A method for determining initial velocities of the urokinase (EC 3.4.99.26) catalysed converstion of NH2-terminal lysine plasminogen to plasmin (EC 3.4.21.7) is presented. This reaction has been coupled with the hydrolysis of alpha-N-benzyoly-L-arginine ethyl ester, which is catalysed by plasmin, and its rate has been determined from the time course of the overall reaction. The proenzyme-enzyme conversion was found to obey the Michaelis-Menten rate equation. The following values of the kinetic parameters were obtained: the apparent Michaelis constant, Km = 40.7 +/- 6.2 muM; the catalytic constant, kc = 2.59+/-0.31 s(-1), and kc/Km = 6.36-10(4) +/- 0.24-10(4) M(-1)-s(-1).     

Full model for reversible kinetics of lipase-catalyzed sugar-ester synthesis in 2-methyl 2-butanol

A kinetic model derived from the ping-pong bi-bi reversible mechanism is proposed to described the acylation of glucose by lauric acid in 2-methyl 2-butanol mediated by Candida antarctica lipase at 60 degrees C. The model accounts for the effect of all four compounds in the reaction mixture, namely lauric acid, glucose, water, and lauroyl glucose ester. A supersaturated glucose solution was used to avoid limitations by glucose dissolution rate. Experiments with varied initial water content were performed to determine the effect of water on the initial reaction rate. The full time course of ester formation is described by five parameters: (a) three parameters evaluated from initial rate measurements; (b) the equilibrium constant, independently evaluated; and (c) one extra parameter fitted to the progress curve of ester formation. This reduced form of a full reversible kinetic model based on the ping-pong bi-bi mechanism is able to describe the complete course of lauroyl glucose ester synthesis. The proposed model provides a good fit for the experimental results.     

Regulation of fatty acid 18O exchange catalyzed by pancreatic carboxylester lipase. 1. Mechanism and kinetic properties.

The exchange of 18O between H2O and long-chain free fatty acids is catalyzed by pancreatic carboxylester lipase (EC 1.1.1.13). For palmitic, oleic, and arachidonic acid in aqueous suspension and for 13,16-cis,cis-docosadienoic acid (DA) in monomolecular films, carboxyl oxygens were completely exchanged with water oxygens of the bulk aqueous phase. With enzyme at either substrate or catalytic concentrations in the argon-buffer interface, the exchange of DA oxygens obeyed a random sequential mechanism, i.e., 18O,18O-DA in equilibrium with 18O,16O-DA in equilibrium with 16O,16O-DA. This indicates that the dissociation of the enzyme-DA complex is much faster than the rate-limiting step in the overall exchange reaction. Kinetic analysis of 18O exchange showed a first-order dependence on surface enzyme and DA concentrations, i.e., the reaction was limited by the acylation rate. The values of kcat/Km, 0.118 cm2 pmol-1 s-1, for the exchange reaction was comparable to that for methyl oleate hydrolysis and 5-fold higher than that for cholesteryl oleate hydrolysis in monolayers [Bhat, S., & Brockman, H. L. (1982) Biochemistry 21, 1547]. Thus, fatty acids are good "substrates" for carboxylester lipase. With substrate levels of carboxylester lipase in the interfacial phase, the acylation rate constant kcat/Km was 200-fold lower than that obtained with catalytic levels of enzyme. This suggests a possible restriction of substrate diffusion in the protein-covered substrate monolayer.     

Acyloxymethyl as a drug protecting group. Part 7: Tertiary sulfonamidomethyl ester prodrugs of benzylpenicillin: chemical hydrolysis and anti-bacterial activity

Tertiary sulfonamidomethyl esters of benzylpenicillin (4) were synthesised and evaluated as a new class of potential prodrugs for beta-lactam antibiotics. Their hydrolysis in aqueous buffers was studied by HPLC and reveal a U-shaped pH rate profile with a pH-independent process extending from ca. pH 2 to ca. pH 10. This pathway is characterised by kinetic data that are consistent with a unimolecular mechanism involving rate-limiting iminium ion formation and penicillinoate expulsion. Benzylpenicillin and the corresponding sulfonamide are the ultimate products detected and isolated, indicating that beta-lactam ring opening is much slower than ester hydrolysis. As expected from the high reactivity, benzylpenicillin esters (4) displayed similar in vitro antibacterial activity to benzylpenicillin itself. Compared to the benzylpenicillin derivatives, sulfonamidomethyl esters of benzoic, clofibric and valproic acids display a much higher stability, giving rise to a Br?nsted beta1g value of -0.96 and suggesting that tertiary sulfonamidomethyl esters may be useful prodrugs for carboxylic acid drugs with pKa > 4.     

The role of Tyr248 probed by mutant bovine carboxypeptidase A: insight into the catalytic mechanism of carboxypeptidase A

We have investigated the function of Tyr248 using bovine wild-type CPA and its Y248F and Y248A mutants to find that the K(M) values were increased by 4.5-11-fold and the k(cat) values were reduced by 4.5-10.7-fold by the replacement of Tyr248 with Phe for the hydrolysis of hippuryl-L-Phe (HPA) and N-[3-(2-furyl)acryloyl]-Phe-Phe (FAPP), respectively. In the case of O-(trans-p-chlorocinnamoyl)-L-beta-phenyllactate (ClCPL), an ester substrate, the K(M) value was increased by 2.5-fold, and the k(cat) was reduced by 20-fold. The replacement of Tyr248 with Ala decreased the k(cat) values by about 18- and 237-fold for HPA and ClCPL, respectively, demonstrating that the aromatic ring of Tyr248 plays a critical role in the enzymic reaction. The increases of the K(M) values were only 6- and 5-fold for HPA and ClCPL, respectively. Thus, the present study indicates clearly that Tyr248 plays an important role not only in the binding of substrate but also in the enzymic hydrolysis. The kinetic results may be rationalized by the proposition that the phenolic hydroxyl of Tyr248 forms a hydrogen bond with the zinc-bound water molecule, causing further activation of the water molecule by reducing its pK(a) value. The pH dependency study of k(cat) values and the solvent isotope effects also support the proposition. A unified catalytic mechanism is proposed that can account for the different kinetic behavior observed in the CPA-catalyzed hydrolysis of peptide and ester substrates.     

Energetics of ribonuclease A catalysis. 2. Nonenzymatic hydrolysis of cytidine cyclic 2',3'-phosphate

Various kinetic aspects of the nonenzymatic hydrolysis of cytidine cyclic 2',3'-phosphate and uridine cyclic 2',3'-phosphate have been studied in order to provide a basis for comparison with the ribonuclease A catalyzed hydrolysis reaction. Studies of the pH dependence of the nonenzymatic reaction reveal mechanisms that are first order in hydroxide concentration and second order in hydrogen ion concentration, in addition to a "water" reaction. The rate constant for the water reaction was found to be very small, approximately equal to 2.5 X 10(-6) min-1. General base catalyzed hydrolysis reactions were also studied with imidazole as the catalyst. At pH values in which both the protonated and neutral forms of imidazole are present, a kinetic mechanism was observed that appears to be second order in total imidazole concentration, thus suggesting that bifunctional catalysis occurs. The activation enthalpy for the hydroxide, hydrogen ion, water, and imidazole catalyzed reactions was determined.     

A Model for the Interfacial Kinetics of Phospholipase D Activity on Long-Chain Lipids

The membrane-active enzyme phospholipase D (PLD) catalyzes the hydrolysis of the phosphodiester bond in phospholipids and plays a critical role in cell signaling. This catalytic reaction proceeds on lipid-water interfaces and is an example of heterogeneous catalysis in biology. Recently we showed that planar lipid bilayers, a previously unexplored model membrane for these kinetic studies, can be used for monitoring interfacial catalytic reactions under well-defined experimental conditions with chemical and electrical access to both sides of the lipid membrane. Employing an assay that relies on the conductance of the pore-forming peptide gramicidin A to monitor PLD activity, the work presented here reveals the kinetics of hydrolysis of long-chain phosphatidylcholine lipids in situ. We have developed an extension of a basic kinetic model for interfacial catalysis that includes product activation and substrate depletion. This model describes the kinetic behavior very well and reveals two kinetic parameters, the specificity constant and the interfacial quality constant. This approach results in a simple and general model to account for product accumulation in interfacial enzyme kinetics.     

Rigorous kinetic model considering positional specificity of lipase for enzymatic stepwise hydrolysis of triolein in biphasic oil–water system

A rigorous kinetic model describing the stepwise triglyceride hydrolysis at the oil–water interface, based on the Ping Pong Bi Bi mechanism using suspended lipase having positional specificity, was constructed. The preference of the enzyme to cleave to the ester bonds at the edge and the center of the glycerol backbone of the substrates (tri-, di- or monoglyceride) was incorporated in the model. This model was applied to the experimental results for triolein hydrolysis using suspended Porcine pancreatic lipase (an sn-1,3 specific lipase) and Candida rugosa lipase (a non-specific lipase) in a biphasic oil–water system under various operating conditions. In order to discuss the model’s advantages, other models that do not consider the positional specificity of the lipase were also applied to our experimental results. The model considering the positional specificity of the lipase gave results which fit better with the experimental data and described the effect of the initial enzyme concentration, the interfacial area, and the initial concentrations of triolein on the entire process of the stepwise triolein hydrolysis. This model also gives a good representation of the rate for cleaving the respective ester bonds of each substrate by each type of lipase.     

On the use of apparent kinetic parameters for immobilized enzyme with noncompetitive substrate inhibition

The use of a simple rate equation with apparent parameters to describe the kinetic behavior of an immobilized enzyme with noncompetitive substrate inhibition was assessed. To do so, the reaction rate was calculated as a function of the interfacial substrate concentration, and the results were used to identify the apparent kinetic parameters by nonlinear regression. This procedure was repeated for different values of the diffusional constraints and of the inhibition constant. The equation using apparent parameters can describe the global kinetic behavior, provided that the diffusional and inhibitory constraints are not too high. When the constraints are high, a Michaelis-Menten equation can be used to model the kinetics for interfacial concentrations lower than the concentration leading to the maximum reaction rate.     

The catalytic serine of meta-cleavage product hydrolases is activated differently for C-O bond cleavage than for C-C bond cleavage

meta-Cleavage product (MCP) hydrolases catalyze C-C bond fission in the aerobic catabolism of aromatic compounds by bacteria. These enzymes utilize a Ser-His-Asp triad to catalyze hydrolysis via an acyl-enzyme intermediate. BphD, which catalyzes the hydrolysis of 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) in biphenyl degradation, catalyzed the hydrolysis of an ester analogue, p-nitrophenyl benzoate (pNPB), with a k(cat) value (6.3 ± 0.5 s(-1)) similar to that of HOPDA (6.5 ± 0.5 s(-1)). Consistent with the breakdown of a shared intermediate, product analyses revealed that BphD catalyzed the methanolysis of both HOPDA and pNPB, partitioning the products to benzoic acid and methyl benzoate in similar ratios. Turnover of HOPDA was accelerated up to 4-fold in the presence of short, primary alcohols (methanol > ethanol > n-propanol), suggesting that deacylation is rate-limiting during catalysis. In the steady-state hydrolysis of HOPDA, k(cat)/K(m) values were independent of methanol concentration, while both k(cat) and K(m) values increased with methanol concentration. This result was consistent with a simple model of nucleophilic catalysis. Although the enzyme could not be saturated with pNPB at methanol concentrations of >250 mM, k(obs) values from the steady-state turnover of pNPB at low methanol concentrations were also consistent with a nucleophilic mechanism of catalysis. Finally, transient-state kinetic analysis of pNPB hydrolysis by BphD variants established that substitution of the catalytic His reduced the rate of acylation by more than 3 orders of magnitude. This suggests that for pNPB hydrolysis, the serine nucleophile is activated by the His-Asp dyad. In contrast, rapid acylation of the H265Q variant during C-C bond cleavage suggests that the serinate forms via a substrate-assisted mechanism. Overall, the data indicate that ester hydrolysis proceeds via the same acyl-enzyme intermediate as that of the physiological substrate but that the serine nucleophile is activated via a different mechanism.     

Cryoenzymology of trypsin. A detailed kinetic study of the trypsin-catalysed hydrolysis of N-alpha-benzyloxycarbonyl-L-lysine p-nitrophenyl ester at low temperatures.

A detailed study of the kinetics of the trypsin (EC 3.4.21.4)-catalysed hydrolysis of N-alpha-benzyloxycarbonyl-L-lysine p-nitrophenyl ester in cryosolvents at 0 degrees C and below was undertaken. The pH-dependences of kcat, Km, k+2, k+3 and Ks were determined under cryoenzymological conditions and are compared with previous results [Antonini & Ascenzi (1981) J. Biol. Chem. 256, 12449-12455] obtained in fully aqueous media at ambient temperatures. Below pH 5.0 the kinetics, and presumably the mechanism of catalysis, are not significantly perturbed under cryoenzymological conditions. However, it is shown that below pH 5.0 both Km and Ks are decreased under these conditions but that both are increased at pH 6.7 relative to the results obtained in fully aqueous media at ambient temperatures. The effects of the cryoenzymological conditions on the individual catalytic parameters are discussed. The acylation rate constant, k+2, is essentially constant at pH 4.2 and 5.0 but decreases at lower pH values with an apparent pKa of approx. 4.0. In view of the low enthalpy of ionization associated with this pKa it is suggested that this group is the carboxy group of aspartic acid-189, which binds the positively charged lysine side chain of the substrate. The mechanistic implications of the results for the acylation step are discussed. It is also shown that only at low pH values can significant amounts of acylated trypsin be accumulated.     

The kinetics and mechanisms of the reaction of iron(III) with gallic acid, gallic acid methyl ester and catechin.

The kinetics and mechanisms of the reactions of a number of pyrogallol-based ligands with iron(III) have been investigated in aqueous solution at 25 degrees C and ionic strength 0.5 M NaClO(4). Mechanisms have been proposed which account satisfactorily for the kinetic data. These are generally consistent with a mechanism in which the 1:1 complex that is formed initially when the metal reacts with the ligand subsequently decays through an electron transfer reaction. There was also some evidence for the formation of a 1:2 ligand-to-metal complex at higher pH values. The kinetics of complex formation were investigated with either the ligand or metal in pseudo-first-order excess. Rate constants for k(1) of 2.83(+/-0.09)x10(3), 1.75(+/-0.045)x10(3) and 3300(+/-200) M(-1) s(-1) and k(-1) of 20(+/-6.0), 35(+/-13) and 25+/-7.6 M(-1) s(-1) have been evaluated for the reaction of Fe(OH)(2+) with gallic acid, gallic acid methyl ester and catechin, respectively. The stability constant of each [Fe(L)](+) complex has been calculated from the kinetic data. The iron(III) assisted decomposition of the initial iron(III) complex formed was investigated. Analysis of the kinetic data yielded both the equilibrium constants for protonation of the iron(III) complexes initially formed together with the rate constants for the intramolecular electron transfers for gallic acid and gallic acid methyl ester. All of the suggested mechanisms and calculated rate constants are supported by calculations carried out using global analysis of time-dependent spectra.