Structure, surface charge, and self-assembly of the S-layer lattice from Bacillus coagulans E38-66.

In freeze-etched preparations, whole cells from Bacillus coagulans E38-66 exhibited an oblique S-layer lattice (a = 9.4 nm; b = 7.4 nm; gamma = 80 degrees). The three-dimensional structure of the crystalline array was characterized by optical and computer image analysis. The lattice showed two distinctly shaped types of pores. In vitro self-assembly of isolated subunits yielded flat sheets and open-ended cylinders composed of two back-to-back monolayers. Unlike whole cells, in vitro self-assembly products were capable of binding polycationized ferritin (pI, approximately 11). This showed that only the inner S-layer face adhering to the peptidoglycan-containing layer in whole cells was net negatively charged. S-layer monomers and/or oligomers were capable of generating a closed monolayer with oblique symmetry on poly-L-lysine-coated supports. The monolayer had a typical crazy paving appearance, with numerous crystal boundaries. The handedness of the oblique lattice and ability to bind polycationized ferritin revealed that the subunits had bound with the outer, not net negatively charged face to the poly-L-lysine-coated supports. Carbodiimide-activated carboxyl groups on either cell wall fragments or self-assembly products could covalently bind high-molecular-weight nucleophiles such as ferritin. This confirmed the location of negatively charged carboxyl groups on the outermost surface of both S-layer faces. The difference in pH optimum for carbodiimide activation indicated a preponderance of alpha- and beta-carboxyl groups on the inner S-layer face and a preponderance of beta- and gamma-carboxyl groups on the outer S-layer face.     

Use of regularly structured bacterial cell envelope layers as matrix for the immobilization of macromolecules

Summary Carboxyl groups present on the outer face of the hexagonally ordered S-layer lattices from Bacillus stearothermophilus PV72 and Clostridium thermohydrosulfuricum L111-69 were activated with carbodiimide. The reaction of the activated carboxyl groups with free amino groups of low molecular weight nucleophiles was controlled by labelling with polycationized ferritin, a net positively charged topographical marker for electron microscopy, which densely binds to S-layers possessing free carboxyl groups. Carbodiimide-activated carboxyl groups were also allowed to react with amino groups of ferritin (MW 440 000) and invertase (MW 270 000). Covalent attachment of ferritin was examined by electron microscopy. Using invertase, approximately 1 mg enzyme was bound per mg S-layer protein indicating a high packing density of invertase molecules on the outer face of the S-layer lattice. The immobilized invertase retained 70% of its original activity.     

Charge distribution on the S layer of Bacillus stearothermophilus NRS 1536/3c and importance of charged groups for morphogenesis and function.

The distribution and functional significance of charged groups on the outer and inner faces of the S layer from Bacillus stearothermophilus NRS 1536/3c was investigated. Chemical modification of the exposed amino or carboxyl groups was performed on whole cells, isolated S layers self-assembled in vitro, and cell wall fragments (S layer attached to the peptidoglycan-containing sacculus). Without chemical modification, S layer self-assembly products could be labeled with polycationic ferritin, while S layers on whole cells could not. Following treatment with glutaraldehyde, whole cells were uniformly labeled with polycationic ferritin. Whole cells treated with glutaraldehyde and glycine methyl ester in the presence of carbodiimide did not bind polycationic ferritin significantly above background. Treatment of cell wall fragments with amino-specific, homobifunctional cross-linkers or with carbodiimide alone rendered the S layer protein nonextractable with sodium dodecyl sulfate. After amidation of the accessible carboxyl groups, the modified, guanidine hydrochloride-extractable S layer protomers did not self-assemble into regularly structured lattices. N-Amidination with ethylacetimidate did not interfere with the self-assembly of the isolated protomers. N-Acetylation resulted in a considerable destabilization of the S layer lattice, as seen by the release of a large amount of modified protomers during the reaction. N-Succinylation led to a complete disintegration of the protein lattice. These results indicated that only the inner face of the S layer carried a net negative charge. On both faces, free amino and carboxyl groups of adjacent protomers were arranged in proximity so as to contribute by electrostatic interactions to the cohesion of the protomers in the two-dimensional array. The native charge of the protomers was required for both the in vitro self-assembly of the isolated subunits and the maintenance of the structural integrity of the S layer lattice. Among other functions, the biological significance of the S layers may be in masking the electronegative charge of the cell wall proper.     

Large-scale recrystallization of the S-layer of Bacillus coagulans E38-66 at the air/water interface and on lipid films.

S-layer protein isolated from Bacillus coagulans E38-66 could be recrystallized into large-scale coherent monolayers at an air/water interface and on phospholipid films spread on a Langmuir-Blodgett trough. Because of the asymmetry in the physiochemical surface properties of the S-layer protein, the subunits were associated with their more hydrophobic outer face with the air/water interface and oriented with their negatively charged inner face to the zwitterionic head groups of the dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylethanolamine (DPPE) monolayer films. The dynamic crystal growth at both types of interfaces was first initiated at several distant nucleation points. The individual monocrystalline areas grew isotropically in all directions until the front edge of neighboring crystals was met. The recrystallized S-layer protein and the S-layer-DPPE layer could be chemically cross-linked from the subphase with glutaraldehyde.     

The S-layer from Bacillus stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase.

The S-layer lattice from Bacillus stearothermophilus DSM 2358 completely covers the cell surface and exhibits oblique symmetry. During growth of B. stearothermophilus DSM 2358 on starch medium, three amylases with molecular weights of 58,000, 98,000, and 184,000 were secreted into the culture fluid, but only the high-molecular-weight enzyme was found to be cell associated. Studies of interactions between cell wall components and amylases revealed no affinity of the high-molecular-weight amylase to isolated peptidoglycan. On the other hand, this enzyme was always found to be associated with S-layer self-assembly products or S-layer fragments released during preparation of spheroplasts by treatment of whole cells with lysozyme. The molar ratio of S-layer subunits to the bound amylase was approximately 8:1, which corresponded to one enzyme molecule per four morphological subunits. Immunoblotting experiments with polyclonal antisera against the high-molecular-weight amylase revealed a strong immunological signal in response to the enzyme but no cross-reaction with the S-layer protein or the smaller amylases. Immunogold labeling of whole cells with anti-amylase antiserum showed that the high-molecular-weight amylase is located on the outer face of the S-layer lattice. Because extraction of the amylase was possible without disintegration of the S-layer lattice into its constituent subunits, it can be excluded that the enzyme is incorporated into the crystal lattice and participates in the self-assembly process. Affinity experiments strongly suggest the presence of a specific recognition mechanism between the amylase molecules and S-layer protein domains either exposed on the outermost surface or inside the pores. In summary, results obtained in this study confirmed that the S-layer protein from B. stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase.     

Permeability and charge-dependent adsorption properties of the S-layer lattice from Bacillus coagulans E38-66.

We investigated the permeability properties of the oblique S-layer lattice from Bacillus coagulans E38-66 after depositing cell wall fragments on a microfiltration membrane, cross-linking the S-layer protein with glutaraldehyde, and degrading the peptidoglycan with lysozyme. Comparative permeability studies on such multilayered S-layer membranes and suspended S-layer vesicles from thermophilic members of the family Bacillaceae with use of the space technique (M. Sára and U. B. Sleytr, J. Bacteriol. 169:4092-4098, 1987) revealed identical molecular exclusion limits (M. Sára and U. B. Sleytr, J. Membr. Sci. 33:27-49, 1987). Examination of the S-layer lattice from B. coagulans E38-66 with the S-layer membrane technique revealed unhindered passage for molecules up to the size of myoglobin (M(r) 17,000). The molecular dimensions of this protein (2.8 by 3.2 by 4.5 nm) correspond approximately to the size of the ovoid-shaped pore previously shown by high-resolution electron microscopy of negatively stained S-layer self-assembly products (D. Pum, M. Sára, and U. B. Sleytr, J. Bacteriol. 171:5296-5303, 1989). Chemical modification of the S-layer protein and comparative labeling, adsorption, and permeability studies clearly demonstrated that (i) in the native state, free amino and carboxyl groups are present on the outer S-layer face and in the interior of the pores and (ii) electrostatic interactions between these groups prevent unspecific adsorption of the S-layer in vivo.     

Evidence that the N-terminal part of the S-layer protein from Bacillus stearothermophilus PV72/p2 recognizes a secondary cell wall polymer.

The S-layer of Bacillus stearothermophilus PV72/p2 shows oblique lattice symmetry and is composed of identical protein subunits with a molecular weight of 97,000. The isolated S-layer subunits could bind and recrystallize into the oblique lattice on native peptidoglycan-containing sacculi which consist of peptidoglycan of the A1gamma chemotype and a secondary cell wall polymer with an estimated molecular weight of 24,000. The secondary cell wall polymer could be completely extracted from peptidoglycan-containing sacculi with 48% HF, indicating the presence of phosphodiester linkages between the polymer chains and the peptidoglycan backbone. The cell wall polymer was composed mainly of GlcNAc and ManNAc in a molar ratio of 4:1, constituted about 20% of the peptidoglycan-containing sacculus dry weight, and was also detected in the fraction of the S-layer self-assembly products. Extraction experiments and recrystallization of the whole S-layer protein and proteolytic cleavage fragments confirmed that the secondary cell wall polymer is responsible for anchoring the S-layer subunits by the N-terminal part to the peptidoglycan-containing sacculi. In addition to this binding function, the cell wall polymer was found to influence the in vitro self-assembly of the guanidinium hydrochloride-extracted S-layer protein. Chemical modification studies further showed that the secondary cell wall polymer does not contribute significant free amino or carboxylate groups to the peptidoglycan-containing sacculi.     

Surface properties from the S-layer of Clostridium thermosaccharolyticum D120-70 and Clostridium thermohydrosulfuricum L111-69

Labelling experiments using a positively charged topographical marker for electron microscopy, polycationized ferritin, showed that the S-layers of two closely related clostridia Clostridium thermohydrosulfuricum L111-69 and C. thermosaccharolyticum D120-70 do not exhibit a net negative charge, as usually observed for bacterial cell surfaces. Chemical modification of reactive sites confirmed that amino and carboxyl groups are exposed on the S-layer surface of both strains. Amino-specific, bifunctional agents crosslinked both S-layer lattices. Studies with carbodiimides revealed that only the S-layer surface of C. thermohydrosulfuricum L111-69 had amino and carboxyl groups closely enough aligned to permit electrostatic interactions between the constituent protomers. The regular structure of this S-layer lattice was lost upon converting the carboxyl groups into neutral groups by amidation. Disintegration of both S-layer lattices occurred upon N-acetylation or N-succinylation of the free amino groups. Adhesion experiments showed that in neutral and weakly alkaline environment whole cells of C. thermosaccharolyticum D120-70 exhibited a stronger tendency to bind to charged surfaces than whole cells of C. thermohydrosulfuricum L111-69, but showed a lower tendency to bind to hydrophobic materials.     

Molecular characterization of the S-layer gene,sbpA, of Bacillus sphaericus CCM 2177 and production of a functional S-layer fusion protein with the ability to recrystallize in a defined orientation while presenting the fused allergen

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5' end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA(31-1068)). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA(31-1068). Labeling of the square S-layer lattice formed by recrystallization of rSbpA(31-1068)/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.     

Molecular Characterization of the S-Layer Gene, sbpA, of Bacillus sphaericus CCM 2177 and Production of a Functional S-Layer Fusion Protein with the Ability To Recrystallize in a Defined Orientation while Presenting the Fused Allergen

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5′ end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA_31-1068). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA_31-1068. Labeling of the square S-layer lattice formed by recrystallization of rSbpA_31-1068/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.     

Localization of the carbohydrate residue of the S-layer glycoprotein from Clostridium thermohydrosulfuricum L111-69

The location of the covalently attached carbohydrate residue of the S-layer glycoprotein from Clostridium thermohydrosulfuricum L111-69 was determined by electron microscopical procedures after converting the hydroxyl groups of the carbohydrate chains into carboxyl groups by succinylation. The introduction of carboxyl groups was examined by labelling with polycationized ferritin (PCF; a net positively charged topographical marker for electron microscopy). Cyanogen bromide was used for activating vicinal hydroxyl groups of the carbohydrate chains which could then react with amino groups of amino carbonic acids or ferritin. The amount of covalently bound ferritin was determined by freeze-etching and UV-measurement. Both, succinylation experiments and covalent attachment of ferritin confirmed that at least a considerable portion of the carbohydrate residue must be located on the S-layer surface.     

The surface location of individual residues in a bacterial S-layer protein

Bacterial surface layer (S-layer) proteins self-assemble into large two-dimensional crystalline lattices that form the outermost cell-wall component of all archaea and many eubacteria. Despite being a large class of self-assembling proteins, little is known about their molecular architecture. We investigated the S-layer protein SbsB from Geobacillus stearothermophilus PV72/p2 to identify residues located at the subunit-subunit interface and to determine the S-layer's topology. Twenty-three single cysteine mutants, which were previously mapped to the surface of the SbsB monomer, were subjected to a cross-linking screen using the photoactivatable, sulfhydryl-reactive reagent N-[4-(p-azidosalicylamido)butyl]-3′-(2′-pyridyldithio)propionamide. Gel electrophoretic analysis on the formation of cross-linked dimers indicated that 8 out of the 23 residues were located at the interface. In combination with surface accessibility data for the assembled protein, 10 residues were assigned to positions at the inner, cell-wall-facing lattice surface, while 5 residues were mapped to the outer, ambient-exposed lattice surface. In addition, the cross-linking screen identified six positions of intramolecular cross-linking within the assembled protein but not in the monomeric S-layer protein. Most likely, these intramolecular cross-links result from conformational changes upon self-assembly. The results are an important step toward the further structural elucidation of the S-layer protein via, for example, X-ray crystallography and cryo-electron microscopy. Our approach of identifying the surface location of residues is relevant to other planar supramolecular protein assemblies.     

Initial steps in protein membrane insertion. Bacteriophage M13 procoat protein binds to the membrane surface by electrostatic interaction.

Bacteriophage M13 procoat protein is synthesized on free polysomes prior to its assembly into the inner membrane of Escherichia coli. As an initial step of the membrane insertion pathway, the precursor protein interacts with the cytoplasmic face of the inner membrane. We have used oligonucleotide-directed mutagenesis to study the regions of the procoat protein involved in membrane binding. We find that there is an absolute requirement for positively charged amino acids at both ends of the protein. Replacing these with negatively charged residues resulted in an accumulation of the precursor in the cytoplasm. We propose that the positively charged amino acids are directly involved in membrane binding, possibly directly to the negatively charged phospholipid head groups. This was tested in vitro with artificial liposomes. Whereas wild-type procoat interacted with these liposomes, we found that procoat mutants with negatively charged amino acids at both ends did not bind. Therefore, we conclude that newly synthesized M13 procoat protein binds electrostatically to the negatively charged inner membrane of E. coli.     

Anti-HIV activity of a series of cosalane amino acid conjugates

The binding of the anti-HIV agent cosalane to CD4 is thought to involve ionic interactions of negatively charged carboxylates of the ligand with positively charged residues on the surface of the protein. The purpose of the present study was to examine the hypothesis that the two carboxyl groups of cosalane could be sacrificed through conjugation to amino acids, and the anti-HIV activity still be retained, provided that at least two new carboxyl groups are contributed by the amino acid residues.     

Regulation of S-layer protein synthesis of Bacillus stearothermophilus PV72 through variation of continuous cultivation conditions

The crystalline cell surface layer (S-layer) of Bacillus stearothermophilus PV72 shows hexagonal lattice symmetry and is composed of a single protein species with a molecular weight of 130000. For investigating the regulation of S-layer protein synthesis, Bacillus stearothermophilus PV72 was grown in continuous culture on synthetic PVIII- medium with glucose as carbon source at constant dilution rate of 0.3 h⁻¹ at 57 ° C under different conditions and limitations. A complete outer S-layer and an S-layer protein pool sufficient for formation of about 70% inner S-layer was produced under carbon-limited growth. The inner S-layer results from an S-layer protein pool stored in the peptidoglycan-containing layer of whole cells which can emerge and assemble on the inner face of the rigid cell wall layer during the cell wall preparation procedure. Under oxygen-limited growth, only a complete outer S-layer but no S-layer protein pool was synthesized. Reduction of the methionine concentration of PVIII-medium from 100 to 10 mg l⁻¹ led to a clear decrease in S-layer protein production and to an incomplete outer S-layer. During growth in the presence of excess glucose, S-layer protein synthesis was replaced by that of an exopolysaccharide matrix. After changing to carbon limitation again, the original level of S-layer protein synthesis was achieved after only four volume exchanges. Feeding of casein hydrolysate or aromatic or basic amino acids to the continuous culture induced an irreversible loss of S-layer protein synthesis after from five to ten volume exchanges. In contrast, addition of Gly, Ala, Val, Leu, Ile, Glu, Gln, Asp, Asn, Ser and Thr in different mixtures could significantly stimulate S-layer protein production.     

Evidence for an S-layer protein pool in the peptidoglycan of Bacillus stearothermophilus.

Intact cells of Bacillus stearothermophilus PV72 revealed, after conventional thin-sectioning procedures, the typical cell wall profile of S-layer-carrying gram-positive eubacteria consisting of a ca. 10-nm-thick peptidoglycan-containing layer and a ca. 10-nm-thick S layer. Cell wall preparations obtained by breaking the cells and removing the cytoplasmic membrane by treatment with Triton X-100 revealed a triple-layer structure, with an additional S layer on the inner surface of the peptidoglycan. This profile is characteristic for cell wall preparations of many S-layer-carrying gram-positive eubacteria. Among several variants of strain PV72 obtained upon single colony isolation, we investigated the variant PV72 86-I, which does not exhibit an inner S layer on isolated cell walls but instead possesses a profile identical to that observed for intact cells. In the course of a controlled mild autolysis of isolated cell walls, S-layer subunits were released from the peptidoglycan of the variant and assembled into an additional S layer on the inner surface of the walls, leading to a three-layer cell wall profile as observed for cell wall preparations of the parent strain. In comparison to conventionally processed bacteria, freeze-substituted cells of strain PV72 and the variant strain revealed in thin sections a ca. 18-nm-wide electron-dense peptidoglycan-containing layer closely associated with the S layer. The demonstration of a pool of S-layer subunits in such a thin peptidoglycan layer in an amount at least sufficient for generating one coherent lattice on the cell surface indicated that the subunits must have occupied much of the free space in the wall fabric of both the parent strain and the variant. It can even be speculated that the rate of synthesis and translation of the S-layer protein is influenced by the packing density of the S-layer subunits in the periplasm of the cell wall delineated by the outer S layer and the cytoplasmic membrane. Our data indicate that the matrix of the rigid wall layer inhibits the assembly of the S-layer subunits which are in transit to the outside.     

Generation of a functional monomolecular protein lattice consisting of an s-layer fusion protein comprising the variable domain of a camel heavy chain antibody

Crystalline bacterial cell surface layer (S-layer) proteins are composed of a single protein or glycoprotein species. Isolated S-layer subunits frequently recrystallize into monomolecular protein lattices on various types of solid supports. For generating a functional protein lattice, a chimeric protein was constructed, which comprised the secondary cell wall polymer-binding region and the self-assembly domain of the S-layer protein SbpA from Bacillus sphaericus CCM 2177, and a single variable region of a heavy chain camel antibody (cAb-Lys3) recognizing lysozyme as antigen. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-Lys3. The functionality of the fused cAb-Lys3 in the S-layer fusion protein was proved by surface plasmon resonance measurements. Dot blot assays revealed that the accessibility of the fused functional sequence for the antigen was independent of the use of soluble or assembled S-layer fusion protein. Recrystallization of the S-layer fusion protein into the square lattice structure was observed on peptidoglycan-containing sacculi of B. sphaericus CCM 2177, on polystyrene or on gold chips precoated with thiolated secondary cell wall polymer, which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Thereby, the fused cAb-Lys3 remained located on the outer S-layer surface and accessible for lysozyme binding. Together with solid supports precoated with secondary cell wall polymers, S-layer fusion proteins comprising rSbpA(31)(-)(1068) and cAbs directed against various antigens shall be exploited for building up monomolecular functional protein lattices as required for applications in nanobiotechnology.     

A recombinant bacterial cell surface (S-layer)-major birch pollen allergen-fusion protein (rSbsC/Bet v1) maintains the ability to self-assemble into regularly structured monomolecular lattices and the functionality of the allergen

The mature crystalline bacterial cell surface (S-layer) protein SbsC of Bacillus stearothermophilus ATCC 12980 comprises amino acids 31-1099 and assembles into an oblique lattice type. As the deletion of up to 179 C-terminal amino acids did not interfere with the self-assembly properties of SbsC, the sequence encoding the major birch pollen allergen (Bet v1) was fused to the sequence encoding the truncated form rSbsC(31-920). The S-layer fusion protein, termed rSbsC/Bet v1, maintained the ability to self-assemble into flat sheets and open-ended cylinders. The presence and the functionality of the fused Bet v1 sequence was proved by blot experiments using BIP1, a monoclonal antibody against Bet v1 and Bet v1-specific IgE-containing serum samples from birch pollen allergic patients. The location and accessibility of the allergen moiety on the outer surface of the S-layer lattice were demonstrated by immunogold labeling of the rSbsC/Bet v1 monolayer, which was obtained by oriented recrystallization of the S-layer fusion protein on native cell wall sacculi. Thereby, the specific interactions between the N-terminal part of SbsC and a distinct type of secondary cell wall polymer were exploited. This is the first S-layer fusion protein described that had retained the specific properties of the S-layer protein moiety in addition to those of the fused functional peptide sequence.     

Stabilizing effect of an S-layer on liposomes towards thermal or mechanical stress

Isolated subunits of the crystalline cell surface layer (S-layer) protein of Bacillus stearothermophilus PV72/p2 were recrystallized on positively charged unilamellar liposomes. Liposomes were composed of dipalmitoylphosphatidylcholine (DPPC), cholesterol and hexadecylamine (HDA) in a molar ratio of 10:5:4 and they were prepared by the dehydration-rehydration method followed by an extrusion procedure. The S-layer protein to DPPC ratio was 5.7 nmol/micromol which approximately corresponds to the theoretical value estimated by using the areas occupied by the S-layer lattice and the lipid membrane. Coating of the positively charged liposomes with S-layer protein resulted in inversion of the zeta-potential from +29.1 mV to -27.1 mV. Covalent crosslinking of the recrystallized S-layer protein was achieved with glutaraldehyde. Chemical analysis revealed that almost all amino groups (>95%) from HDA in the liposomal membrane were involved in the reaction. To study the influence of an S-layer lattice on the stability of the liposomes, the hydrophilic marker carboxyfluoresceine (CF) was encapsulated and its release was determined for plain and S-layer-coated liposomes in the course of mechanical and thermal challenges. In comparison to plain liposomes, S-layer-coated liposomes released only half the amount of enclosed CF upon exposure to shear forces or ultrasonication as mechanical stress factors. Furthermore, temperature shifts from 25 degrees C to 55 degrees C and vice versa induced considerably less CF release from S-layer-coated than from plain liposomes. A similar stabilizing effect of the S-layer lattice was observed after glutaraldehyde treatment of plain and S-layer-coated liposomes.     

Exploitation of the S-layer self-assembly system for site directed immobilization of enzymes demonstrated for an extremophilic laminarinase from Pyrococcus furiosus

A fusion protein based on the S-layer protein SbpA from Bacillus sphaericus CCM 2177 and the enzyme laminarinase (LamA) from Pyrococcus furiosus was designed and overexpressed in Escherichia coli. Due to the construction principle, the S-layer fusion protein fully retained the self-assembly capability of the S-layer moiety, while the catalytic domain of LamA remained exposed at the outer surface of the formed protein lattice. The enzyme activity of the S-layer fusion protein monolayer obtained upon recrystallization on silicon wafers, glass slides and different types of polymer membranes was determined colorimetrically and related to the activity of sole LamA that has been immobilized with conventional techniques. LamA aligned within the S-layer fusion protein lattice in a periodic and orientated fashion catalyzed twice the glucose release from the laminarin polysaccharide substrate in comparison to the randomly immobilized enzyme. In combination with the good shelf-life and the high resistance towards temperature and diverse chemicals, these novel composites are regarded a promising approach for site-directed enzyme immobilization.