On plasmid incompatibility

In this paper is presented a brief review of the current state of information on plasmid incompatibility followed by a detailed mathematical model dealing with incompatibility between autonomous homogenic plasmids and based on the assumption that the intracellular plasmid copy pool is randomized with respect to assortment during cell division. Two cases are considered: one in which each plasmid copy replicates once in each generation of cell growth (regular replication) and one in which plasmids are chosen at random for replication from a common pool, irrespective of their replication history (random replication). In both cases, it is assumed that the partition of plasmid copies to daughter cells at cell division is regular—existing plasmid copies are divided equally among the two daughter cells (equipartition). In the case of regular replication coupled with equipartition, it is shown that the survival of heteroplasmid cells (cells containing at least one copy of each of two incompatible plasmids) during exponential growth in a nonselective medium is given by H = H₀[1 − 1/(2N − 1)]ⁿ, where H₀ and H are the numbers of heteroplasmid cells after 0 and n generations of growth, respectively, and N is the plasmid copy number in newborn cells. In the second case, (random replication-equipartition), it is shown that the survival of the heteroplasmid population during exponential growth under nonselective conditions is given by H = H₀[(N − 1)(2N + 1)/(2N − 1)(N + 1)ⁿ. Sample calculations are presented to show that segregation is more rapid in the latter than in the former case. Finally, some of the plasmid-linked genetic determinants that might be expected to affect the expression of incompatibility between nonisogenic plasmids are briefly considered. These determinants include recognition specificity for replication origins, recognition specificity, specific activity of copy number control systems, and recognition specificity of partition systems.     

RP1 properties and fertility inhibition among P, N, W, and X incompatibility group plasmids.

Incompatibility group P plasmids demonstrate strong entry exclusion properties. Stringent incompatibility is also observed in the absence of entry exclusion. These observations have been facilitated by the study of a nontransmissible plasmid, RP1-S2, derived from RP1 by transductional shortening. RP1-S2 retains carbenicillin and tetracycline resistances as well as loci that cause either the loss of P plasmids (incp) or a locus specifying susceptibility to curing (sinp) in the presence of a P plasmid. RP1-S2 can be mobilized by an incompatibility group W plasmid, R388, and also freely forms recombinants with R388. P, N, and W incompatibility group plasmids all encode information for the receptor of the cell wall-adsorbing phage PRD1. Based on the premise that the location of this receptor is analogous to entry exclusion factors for F-like plasmids and hence a regulated transfer region determinant, we tested fertility inhibition relationships among these plasmid groups. We detected both reciprocal and nonreciprocal fertility inhibition relationships for bacteria containing various combinations of W, N, and P group plasmids. The nonreciprocal nature of some combinations, we believe, reflects the identity of the point mutation reading to derepression of the plasmid in question. Reciprocal fertility inhibition, on the other hand, may reflect the reconstruction of a fertility inhibition system through complementation. An X incompatibility group plasmid, known to affect the fertility of an N group plasmid, was also shown to inhibit P plasmid fertility. These observations may indicate a possible evolutionary relationship(s) of plasmids unrelated by the criteria of incompatibility, pilus phage specificity, or plasmid host range.     

In vivo formation of a plasmid cointegrate expressing two incompatibility phenotypes

Plasmids of the N- and M-incompatibility groups were identified in a clinical isolate of Shigella sonnei. The IncN plasmid pDT200 encoded resistance to trimethoprim, streptomycin, and sulfamethoxazole, and specified N-type pili which were synthesized constitutively. The IncM plasmid mediated resistance to ampicillin, chloramphenicol, streptomycin, sulfamethoxazole, and tetracycline. It was fi⁺ and was repressed for pilus synthesis. Pili specified appeared to be of the FII-type. A recombinant plasmid was formed on transfer of these plasmids from Sh. sonnei to Escherichia coli. The cointegrate plasmid expressed two incompatibility phenotypes and encoded two types of pilus. The incompatibility behavior of the cointegrate plasmid formed in vivo resembled that of composite plasmids constructed by in vitro linkage experiments. The finding that plasmids from clinical isolates may express two incompatibility phenotypes and two types of pilus, and that the pilus type and incompatibility group may not necessarily correspond, has important implications for plasmid classification schemes.     

Properties of R plasmid R772 and the corresponding pilus-specific phage PR772.

R plasmid R772 was isolated from a strain of Proteus mirabilis and is a self-transmissible P-1 incompatibility group plasmid having a molecular weight of about 27 x 10(6). It renders bacterial hosts resistant to kanamycin. Phage PR772 was isolated as a phage dependent on the presence of R772 in bacterial hosts. It is hexagonal-shaped with a diameter of 53 nm, has a thick inner membrane and no tail. Vaguely defined appendages are sometimes apparent at some vertices and the phage possesses double-stranded DNA. The DNA has a guanine plus cytosine molar content of 48%. The phage is sensitive to chloroform and has a buoyant density of 1.26 g cm(-3). These observations suggested that the inner membrane of the phage could contain lipid. Phage PR772 differs in morphology from the double-stranded DNA plasmid-specific phages PR4 and PRR1 which adsorb to tips and sides, respectively, of sex pili coded for by P-1 incompatibility group plasmids. Phage PR772 formed clear plaques which varied in diameter. Serologically, phages PR772 and PR4 are possibly related though very distantly, but the two phages have identical host ranges. Phage PR772 adsorbed by one of its apices to tips of sex pili coded for by plasmid R772 in Escherichia coli. It also formed plaques on Salmonella typhimurium Proteus morganii and Providence strains harbouring this plasmid as well as strains of E. coli carrying plasmids of incompatibility groups N or W. The phage produced areas of partial clearing on lawns of P. mirabilis PM5006 harbouring plasmid R772, the P-1 incompatibility group plasmid RP4, the W group plasmid RSa or the N group plasmid N3, and on lawns of Providence strain P29 carrying plasmid RP4.     

Use of a known plasmid and transposon as tracers for the incompatibility classification of a cryptic plasmid

Summary We have developed a novel genetic technique by which an unknown plasmid can be classified by the use of a plasmid of known incompatibility group. In phenocopy state, cells harboring plasmids of known incompatibility group behave as normal recipients and receive plasmids belonging to the same incompatibility group at a high frequency. This work provides additional evidence that plasmids in phenocopy hosts do not replicate and therefore fail to demonstrate their incompatibility barrier to the incoming plasmids. A cryptic plasmid, now called pWS7, has been identified by this method in a pili, fla female strain of E. coli K12. Genetic analysis shows the plasmid pWS7 is in fact, a sex-factor which is curable with acridine orange. It belongs to the Inc F1 group. Physical analysis confirms its size to be 124 Kb. The plasmid has been labelled genetically with a transposon Tn903 in a recA host and further characterized by heteroduplex analysis. A DNA sequence homology between pWS7 and F'lac plasmid extends only in F-regions, 2.8F-94.5F. The pili, fla host strain of pWS7 shows a high frequency of transformation for recombinant DNA and rapid propagation for a male-specific RNA phage, R17.     

Cloning and analysis of pif, replication and leading regions of the F plasmid

Summary We describe the molecular cloning of BglII fragments of the hybrid plasmid pRS5 (pSC101 and EcoRI fragments of F; f7, f5, f3 and f6). The clones isolated were examined for the expression of F-specified replication, incompatibility, mobilization and inhibition of T7 bacteriophage multiplication. Proteins directed by the BglII clones were labelled in Escherichia coli K12 maxicells and analyzed by SDS-polyacrylamide gel electrophoresis. The sizes of previously reported proteins, encoded by the replication, incompatibility and leading regions encompassed by these plasmids have been confirmed in this study. In addition, the results demonstrate that a pif gene, which encodes an 80,000 dalton polypeptide essential for the inhibition T7 phage multiplication, is located on the BglII fragment that spans the junction of EcoRI fragments f7 and f5.     

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage φX174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5′ region has been identified and is functional in Bacillus subtilis.     

Isolation and characterization of lambda phages carrying the basic replicon of the resistance plasmid R1

Summary Specialized transducing lambda phages, oriR1, harboring DNA from the resistance plasmid R1drd-19 and its copy mutant pKN103 were isolated. From measurements of CCC-DNA content it is concluded that upon infection the phages can establish themselves as self-replicating plasmids in recA hosts lysogenic for lambda. It is thought that this bypassing of lambda immunity is due to the presence of the R1 origin of replication. The plasmids are sensitive to the incompatibility expressed by plasmid R1. This has been shown mainly by transduction of oriR1 into recipients containing R1 plasmids or plasmid pBR322 carrying the basic replicon. We were able to demonstrate that a copy mutant of plasmid R1 was insensitive to copA ⁺, but sensitive to the conserted action of Pst1 fragments F₁ and F₂. This mutant was previously assumed to be of the dominant type. Physical mapping of the oriR1 derivatives verified that they carry the basic replicon of plasmid R1. The plasmids are not stably maintained, but are lost in a frequency of 1%–2% per cell generation, which is consistent with their lack of the R1par region.     

Distribution of sequences homologous to the impCAB operon of TP110 among bacterial plasmids of different incompatibility groups

Summary Mutagenic DNA repair is a function of many naturally occurring plasmids belonging to several different incompatibility groups. A DNA probe corresponding to the impCAB operon of the IncIl plasmid TP110, which encodes such functions, was used to investigate the distribution of homologous sequences in both related and unrelated plasmids. Southern blotting was used to demonstrate considerable sequence conservation amongst a number of plasmid types, with imp-related sequences being found on plasmids belonging to the I1, I1/B, B and FIV incompatibility groups. However, no homology was detected amongst plasmids of the N and L/M incompatibility groups, many of which carry functionally similar gene clusters. It appears that sequences determining mutagenic repair functions have been largely conserved within any one incompatibility group, but that significant divergent evolution has occurred between groups.     

Identification and characterization of plasmids in hydrogen uptake positive and hydrogen uptake negative strains ofRhizobium japonicum

Modifications were made of published procedures to allow routine isolation of plasmids fromRhizobium japonicum. The plasmid profiles of a series of H₂ uptake positive and H₂ uptake negative strains were compared. None of the strains ofR. japonicum with high H₂ uptake activities exhibited discernible plasmids, while most of the strains, with little or no H₂ uptake activity, showed plasmids with molecular weights ranging from approximately 49–290 x10⁶. An examination of H₂ uptake negative mutants derived from an H₂ uptake positive parent revealed two discernible plasmid bands in nonrevertible mutants but no detectable plasmids in revertible mutants or in the parent strain from which mutants were derived.     

Phage t: a group T plasmid-dependent bacteriophage

Phage t was isolated from sewage from Pretoria. It formed plaques only on Escherichia coli and Salmonella typhimurium strains that carried plasmids belonging to incompatibility group T. Five of six group T plasmids permitted visible lysis of R+ host strains. There was no visible lysis of E. coli J53-2 or S. typhimurium LT2trpA8 carrying the T plasmid Rts1 although the strains supported phage growth as indicated by at least a 10-fold increase in phage titre. The latter strains transferred the plasmid at high frequency to E. coli strain CSH2 and the resulting transconjugants plated the phage. Proteus mirabilis strain PM5006(R402) failed to support phage growth although it transferred the plasmid and concomitant phage sensitivity to E. coli J53-2. The phage was hexagonal in outline, RNA-containing, resistant to chloroform and adsorbed to the shafts of pili determined by T plasmids.     

Association of tellurium resistance and bacteriophage inhibition conferred by R plasmids.

Concomitant resistance to tellurium compounds (Ter) and inhibition of coli-phage development (Phi) are properties mediated by many H2 incompatibility group R plasmids which have been isolated from diverse bacterial and geographic sources. Ter plasmids from tellurium-resistant bacteria that were isolated from sewage and industrial wastes also mediated phage inhibition. Of these Ter plasmids, three from Citrobacter freundii belonged to the H incompatibility group, whereas three from Klebsiella pneumoniae did not.     

Partitioning of the F plasmid: Overproduction of an essential protein for partition inhibits plasmid maintenance

Summary Multicopy plasmids carrying the sopB gene of the F plasmid inhibit stable inheritance of a coexisting mini-F plasmid. This incompatibility, termed IncG, is found to be caused by excess amounts of the SopB protein, which is essential for accuratepartitioning of plasmid DNA molecules into daughter cells. A sopB-carrying multicopy plasmid that shows the IncG⁺ phenotype was mutagenized in vitro and IncG negative mutant plasmids were isolated. Among these amber and missense mutants of sopB, mutants with a low plasmid copy number and a mutant in the Shine-Dalgarno sequence for translation of the SopB protein were obtained. These results demonstrate that the IncG phenotype is caused by the SopB protein, and that the incompatibility is expressed only when the protein is overproduced. This suggests that the protein must be kept at appropriate concentrations to ensure stable maintenance of the plasmid.     

Study of the incompatibility and replication of the 70-kb virulence plasmid of Yersinia

The 70-kb virulence plasmid, vir, from four Yersinia enterocolitica and one Y. pseudotuberculosis strains are incompatible with IncFI plasmids FLac and R386 while they are compatible with plasmids representing nine other incompatibility groups. Hybridization experiments carried out on one of these virulence plasmids showed that it contains the F incompatibility determinant D, incD. This determinant was cloned onto pACYC184 and the recombinant clone expressed incompatibility with FLac. We conclude that the incompatibility observed between F or R386 and the 70-kb virulence plasmid of Y. enterocolitica and Y. pseudotuberculosis is mediated by incD. Replication genes (rep) from the same plasmid were cloned independently in Escherichia coli. Rep and incD map on two different BamHI fragments. Surprisingly, the replicon isolated is not sensitive to inc D incompatibility. Apart from incD, vir and F share extremely little homology. In particular, there is no evidence for the presence of an F-like transfer operon on vir.     

Isolation and characterization of a higher-copy-number mutant of plasmid R6K

A stable copy-number mutant (pNH601) of plasmid R6K was isolated by selection for increased resistance to ampicillin determined by this plasmid. The size of the mutant plasmid was found to be unchanged (26 Mg/mol) but it is present in 27 copies of pNH601 perE. coli K-12 chromosome which represents a two-fold increase of R6K copy number value. The following genetic properties of pNH601 are reported and compared with those of R6K: conjugative transfer, fertility inhibition of plasmids belonging to other incompatibility groups, incompatibility with plasmid R485 under both non-selective and selective conditions and the integrative suppression of thednaA ts mutation. The mutant plasmid pNH601 was found to be different from the original R6K in most of these properties.     

The dynamics of pAL2-1 homologous linear plasmids in Podospora anserina

A natural population of recently isolated Podospora anserina strains was screened for homologues of the linear longevity-inducing plasmid pAL2-1. Of the 78 wild-type isolates, 14 hybridised with a pAL2-1 specific probe, half of which contained a single plasmid and the other half multiple plasmid copies (plasmid family). All strains except one plasmid-containing strain, senesced normally. However, no inserted plasmid sequences were detected in the mitochondrial DNA, as was the case for the longevity-inducing pAL2-1 plasmid. Occasional loss of plasmids and of repeated plasmid sequences occurred during sexual transfer. Plasmid transmission was equally efficient for mono- and dikaryotic spores and was independent of the genetic background of the strains. Furthermore, horizontal transfer experiments showed that the linear plasmid could easily infect plasmid-free strains. Horizontal transfer was even observed between strains showing a clear vegetative incompatibility response (barrage). The linear plasmids are inherited maternally; however, paternal transmission was observed in crosses between confronted vegetative-incompatible strains. Paternal transmission of the plasmid was never observed using isolated spermatia for fertilisation, showing that mitochondrial plasmids can only gain access to maternal sexual reproductive structures following horizontal transfer. These findings have implications for both the function of vegetative incompatibility in fungi and for the mechanism of maintenance of linear plasmids. Received: 13 November 1997 / Accepted: 17 February 1998     

T7噬菌体转运真核表达载体入胞表达平台的构建

[目的]构建携带锚定序列的真核表达载体,研究T7噬菌体识别、包裹和转运真核表达载体进入细胞实现蛋白表达的可行性,为DNA疫苗研发建立新的技术平台.[方法]本研究通过重叠延伸PCR方法获得候选锚定序列并插入真核表达载体;建立荧光定量PCR方法比较T7噬菌体识别、包裹真核表达载体的效率;激光共聚焦显微镜观察T7噬菌体转运真...     

A Model for the Evolution of Biological Specificity: a Cross-Reacting DNA-Binding Protein Causes Plasmid Incompatibility

Few biological systems permit rigorous testing of how changes in DNA sequence give rise to adaptive phenotypes. In this study, we sought a simplified experimental system with a detailed understanding of the genotype-to-phenotype relationship that could be altered by environmental perturbations. We focused on plasmid fitness, i.e., the ability of plasmids to be stably maintained in a bacterial population, which is dictated by the plasmid''s replication and segregation machinery. Although plasmid replication depends on host proteins, the type II plasmid partitioning (Par) machinery is entirely plasmid encoded and relies solely on three components: parC, a centromere-like DNA sequence, ParR, a DNA-binding protein that interacts with parC, and ParM, which forms actin-like filaments that push two plasmids away from each other at cell division. Interactions between the Par operons of two related plasmids can cause incompatibility and the reduced transmission of one or both plasmids. We have identified segregation-dependent plasmid incompatibility between the highly divergent Par operons of plasmids pB171 and pCP301. Genetic and biochemical studies revealed that the incompatibility is due to the functional promiscuity of the DNA-binding protein ParR_pB171, which interacts with both parC DNA sequences to direct plasmid segregation, indicating that the lack of DNA binding specificity is detrimental to plasmid fitness in this environment. This study therefore successfully utilized plasmid segregation to dissect the molecular interactions between genotype, phenotype, and fitness.     

Cloned structural gene (ompA) for an integral outer membrane protein of Escherichia coli K-12

Summary pTU 100 is a hybrid plasmid constructed by cloning a 7.5 Kb EcoRI fragment (carrying the wildtype ompA gene) onto pSC 101 (Henning et al., 1979). This plasmid confers sensitivity to phages Tull^* and K3h1 when present in an ompA host strain, due to the expression of the phage receptor protein II^* from the plasmid ompA ⁺ gene. Plasmid mutants have been isolated that have become resistant to one or both of these phages. Restriction endonuclease analysis and DNA-sequencing studies in these plasmids demonstrate that a BamHI site and two PvuII sites are located within the ompA gene. BamHI cuts the gene at a site corresponding to residue 227 within a total of 325 amino acid residues.Neither the wildtype ompA gene nor the BamHI fragment encoding the NH₂-terminal part of the protein (residues 1–227) could be transferred to a high copy number plasmid, presumably due to lethal overproduction of the protein or its NH₂-terminal fragment. However, the NH₂-terminal fragment derived from one of the ompA mutants of pTU100 could be transferred to the high copy number plasmid pBR322, and was expressed in the presence of the amber suppressors supD or supF. Under these conditions two new envelope proteins with apparent molecular weights of 30,000 and 24,000 were synthesized, and the cells became sensitive to phage TuII^*, indicating the presence of phage receptor activity in the outer membrane. The major, 24,000 dalton protein has the molecular weight expected of a protein comprising residues 1–227 of protein II^*. DNA-sequencing studies demonstrated that no termination codons are present in the DNA region immediately downstream from the BamHI site at residue 227 in this hybrid plasmid, and it is therefore likely that the 24,000-dalton protein arises from the posttranslational proteolytic cleavage of a larger polypeptide. The 30,000-dalton protein is a likely candidate for such a larger polypeptide. These results also demonstrate that the 98 CO₂H-terminal residues of wildtype protein II^* (resisdues 228–325) are not required either for the activity of the protein as a phage receptor or for its incorporation into the outer membrane.     

Suppression of Co1E1 replication properties by the Inc P-1 plasmid RK2 in hybrid plasmids constructed in vitro.

Hybrid plasmids were constructed in vitro by linking the Inc P-1 broad host range plasmid RK2 to the colicinogenic plasmid ColE1 at their EcoRI endonuclease cleavage sites. These plasmids were found to be immune to colicin E1, non-colicin-producing, and to exhibit all the characteristics of RK2 including self-transmissibility. These joint replicons have a copy number of 5 to 7 per chromosome which is typical of RK2, but not ColE1. Unlike ColE1, the plasmids will not replicate in the presence of chloramphenicol and are maintained in DNA polymerase I mutants of Escherichia coli. In addition, only RK2 incompatibility is expressed, although functional ColE1 can be rescued from the hybrids by EcoRI cleavage. This suppression of ColE1 copy number and incompatibility was found to be a unique effect of plasmid size on ColE1 properties. However, the inhibition of ColE1 or ColE1-like plasmid replication in chloramphenicol-treated cells is a specific effect of RK2 or segments of RK2 (Cri⁺ phenotype). This phenomenon is not a function of plasmid size and requires covalent linkage of RK2 DNA to ColE1. A specific region of RK2 (50.4 to 56.4 × 10³ base-pairs) cloned in the ColE1-like plasmid pBR313 was shown to carry the genetic determinant(s) for expression of the Cri⁺ phenotype.