Comparative study of Mm. Multifidi in lumbar and thoracic spine.

Imbalance of Mm. Multifidi may play a role in spinal disorders such as scoliosis in the thoracic spine, and lumbar disc herniation and lower back pain in the lumbar spine. Even though changes in these muscles are related to the etiology of these disorders, their anatomy is still poorly understood, especially in the upper regions of the spine. With the aim of gaining a better understanding of the anatomy of Mm. Multifidi in the lumbar and thoracic spine, 12 fresh and two embalmed cadavers were dissected. Our results indicate that Mm. Multifidi present differences in lumbar and thoracic spines concerning their deepness, fibre trajectory, muscle length, muscle mass and tendinous tissue. In the lumbar spine Mm. Multifidi are a superficial, thick and fleshy mass, and their fibres are more vertical in relation to the spinous processes. In the thoracic spine Mm. Multifidi are deeper, thinner, and their fibres are more tendinous and oblique than in the lumbar spine. These differences have implications on Mm. Multifidi architecture and consequently for their function in these two regions of the spine.     

The sensitivity of muscle force predictions to changes in physiologic cross-sectional area

The mechanical effects of a muscle are related in part to the size of the muscle and to its location relative to the joint it crosses. For more than a century, researchers have expressed muscle size by its 'physiological cross-sectional area' (PCSA). Researchers mathematically calculating muscle and joint forces typically use some expression of a muscle's PCSA to constrain the solution to one which is reasonable (i.e. a solution in which small muscles may not have large forces, and large muscles have large forces when expected or when there is significant electromyographic activity). It is obvious that muscle mass (and therefore any expression of PCSA) varies significantly from person to person, even in individuals of similar weight and height. Since it is not practical to predict the PCSA of each muscle in a living subject's limb or trunk, it is important to generally understand the sensitivity of muscle force solutions to possible variations in PCSA. We used nonlinear optimization techniques to predict 47 muscle forces and hip contact forces in a living subject. The PCSA (volume/muscle fiber length) of each of 47 lower limb muscle elements from two cadaver specimens and the 47 PCSA's reported by pierrynowski were input into an optimization algorithm to create three solution sets. The three solutions were qualitatively similar but at times a predicted muscle force could vary as much as two to eight times. In contrast, the joint force solutions were within 11% of each other and, therefore, much less variable.(ABSTRACT TRUNCATED AT 250 WORDS)     

Covariation between forelimb muscle anatomy and bone shape in an Australian scratch-digging marsupial: Comparison of morphometric methods

The close association between muscle and bone is broadly intuitive; however, details of the covariation between the two has not been comprehensively studied. Without quantitative understanding of how muscle anatomy influences bone shape, it is difficult to draw conclusions of the significance of many morphological traits of the skeleton. In this study, we investigated these relationships in the Quenda (Isoodon fusciventer), a scratch-digging marsupial. We quantified the relationships between forelimb muscle anatomy and bone shape for animals representing a range of body masses (124–1,952 g) using two-block partial least square analyses. Muscle anatomy was quantified as muscle mass and physiological cross-sectional area (PCSA), and we used two morphometric methods to characterize bone shape: seven indices of linear bone proportions, and landmarks analysis. Bone shape was significantly correlated with body mass, reflecting allometric bone growth. Of the seven bone indices, only shoulder moment index (SMI) and ulna robustness index (URI) showed a significant covariation with muscle anatomy. Stronger relationships between muscle anatomy and forelimb bone shape were found using the landmark coordinates: muscle mass and PCSA were correlated with the geometric shape of the scapula, humerus, and third metacarpal, but to a lesser extent with shape of the ulna. Overall, our data show that landmark coordinates are more sensitive than bone indices to capturing shape changes evident throughout ontogeny, and is therefore a more appropriate method to investigate covariation with forelimb muscle anatomy. Single-species studies investigating ontogeny require refined methods to accurately develop understanding of the important relationships between muscle force generation and bone shape remodeling. Landmark analyses provide such a method.     

Sarcomere length organization as a design for cooperative function amongst all lumbar spine muscles

The functional design of spine muscles in part dictates their role in moving, loading, and stabilizing the lumbar spine. There have been numerous studies that have examined the isolated properties of these individual muscles. Understanding how these muscles interact and work together, necessary for the prediction of muscle function, spine loading, and stability, is lacking. The objective of this study was to measure sarcomere lengths of lumbar muscles in a neutral cadaveric position and predict the sarcomere operating ranges of these muscles throughout full ranges of spine movements. Sarcomere lengths of seven lumbar muscles in each of seven cadaveric donors were measured using laser diffraction. Using published anatomical coordinate data, superior muscle attachment sites were rotated about each intervertebral joint and the total change in muscle length was used to predict sarcomere length operating ranges. The extensor muscles had short sarcomere lengths in a neutral spine posture and there were no statistically significant differences between extensor muscles. The quadratus lumborum was the only muscle with sarcomere lengths that were optimal for force production in a neutral spine position, and the psoas muscles had the longest lengths in this position. During modeled flexion the extensor, quadratus lumborum, and intertransversarii muscles lengthened so that all muscles operated in the approximate same location on the descending limb of the force-length relationship. The intrinsic properties of lumbar muscles are designed to complement each other. The extensor muscles are all designed to produce maximum force in a mid-flexed posture, and all muscles are designed to operate at similar locations of the force-length relationship at full spine flexion.     

Fibre bundle element method of determining physiological cross-sectional area from three-dimensional computer muscle models created from digitised fibre bundle data

Physiological cross-sectional area (PCSA) is used to compare force-producing capabilities of muscles. A limitation of PCSA is that it cannot be measured directly from a specimen, as there is usually no area within the muscle traversed by all fibres. Traditionally, a formula requiring averaged architectural parameters has been used. The purpose of this paper is to describe the development of a fibre bundle element (FBE) method to calculate PCSA from digitised fibre bundle data of five architecturally distinct muscles and compare the FBE and PCSA formula. An FBE method was developed that used a serially arranged set of cylinders as the volumetric representation of each fibre bundle, and PCSA was computed as the summation of the cross-sectional area of each FBE. Four of five muscles had significantly different PCSA between FBE and formula methods. The FBE method provides an approach that considers architectural variances while minimising the need for averaged architectural parameters.     

Robust estimation of physiological cross-sectional area and geometric reconstruction for human skeletal muscle

Understanding muscle architecture is crucial to determining the mechanical function of muscle during body movements, because architectural parameters directly correspond to muscle performance. Accurate parameters are thus essential for reliable simulation. Human cadaveric muscle specimen data provides the anatomical detail needed for in-depth understanding of muscle and accurate parameter estimation. However, as muscle generally has non-uniform architecture, parameter estimation, specifically, physiological cross-sectional area (PCSA), is rarely straightforward. To deal effectively with this non-uniformity, we propose a geometric approach in which a polygon is sought to best approximate the cross-sectional area of each fascicle by accounting for its three-dimensional trajectory and arrangement in the muscle. Those polygons are then aggregated to determine PCSA and volume of muscle. Experiments are run using both synthetic data and muscle specimen data. From comparison of PCSA using synthetic data, we conclude that the proposed method enhances the robustness of PCSA estimation against variation in muscle architecture. Furthermore, we suggest reconstruction methods to extract 3D muscle geometry directly from fascicle data and estimated parameters using the level set method.     

Effects of 20 days of bed rest on physiological cross-sectional area of human thigh and leg muscles evaluated by magnetic resonance imaging

The present study was to investigate the effects of 20 days of bed rest on morphological characteristics of lower limb skeletal muscles. Ten sedentary volunteers (5 males and 5 females) were participating in this study. Magnetic resonance imaging techniques were used to measure the physiological cross-sectional areas (PCSAs) of the major muscles and muscle groups of the lower limb. Consecutive images were taken from the right thigh and leg of subjects, and muscle volumes (MV), muscle length, and fiber length were calculated. PCSA of each muscle was determined as MV times the cosine of the angle of fiber pennation divided by fiber length. PCSA of knee extensor and flexor muscles were significant reduced during and after bed rest. MV and PCSA of individual muscles in the knee extensors decreased by -5.1 % to -8.0%. In knee flexors, MV and PCSA in biceps femoris (long head), semitendinosus, semimembranosus, and sartorius decreased during and after bed rest. MV and PCSA in medial and lateralis [correction of andateralis] gastrocnemius, and soleus were remarkably reduced by -9.4 to -10.3% after bed rest. The results suggest that there is a great variability of muscle atrophy in the lower limb muscle groups or individual muscle after bed rest and that the plantar flexors primarily affected.     

Musculotendon parameters and musculoskeletal pathways within the human foot

In order to create a flexible model of the foot for dynamic musculoskeletal models, anthropometric data combined with geometric information describing the intrinsic musculature are needed. In this study, the left feet of two male and two female cadavers were dissected to expose the intrinsic musculotendon pathways. Three-dimensional coordinates of bony landmarks, tendon origins, insertions, and via points were digitized to submillimeter accuracy. Muscle architectural parameters were also measured, including volume, weight, and pennation angle and sarcomere, fascicle, and free tendon lengths. Optimal muscle fascicle lengths, pen-nation angles at optimal length, physiological cross-sectional areas (PCSA), and tendon slack lengths were calculated from the directly measured values. Fascicle length and pennation angle varied greatly within each subject. Average fascicle lengths normalized by optimal fascicle length varied between 0.73 and 1.25, with 75% of the formalin-preserved muscles being found in a shortened state. The muscle volume and PCSA also had a large variability within subjects but less variation between subjects. The ratio of tendon slack length to optimal fascicle length was found to vary between 1.05 and 9.56. Using this data, a deformable model of the foot can now be created. It is envisioned that deformable feet will significantly improve stability and realism in models of gait, posture, and sporting activities.     

Assessment of muscle volume and physiological cross-sectional area of the human triceps surae muscle in vivo

The purpose of the present study was to investigate whether it is possible to predict the individual muscle volumes within the triceps surae (TS) muscle group by means of easily measurable parameters based on a theoretical consideration. A further objective was to verify the use of the available literature data to assess the contribution of each muscle of the group to the entire TS volume or physiological cross-sectional-area (PCSA). Therefore, magnetic resonance images of the right calf of 13 male subjects were acquired and each muscle of the TS was reconstructed. Muscle length (l(m)), the maximum anatomical cross-sectional-area (ACSA(max)) and muscle volume were obtained from the 3D models. To assess the PCSA, fascicle length was determined by ultrasonography. In general, muscle volume can be expressed as a fraction of the product of ACSA(max) and l(m). The size of the fraction depends on muscle shape and its coefficient of variance among the examined population was considerable low (soleus 6%, gastrocnemius 4% and gastrocnemius lateralis 7%) in the present study. The product of ACSA(max) and l(m) was, therefore, suitable to assess muscle volume (root mean squares, RMS 4-7%). Further, the soleus, gastrocnemius medialis and gastrocnemius lateralis accounted on average for about 52+/-3%, 32+/-2% and 16+/-2% of the total TS volume and 62+/-5%, 26+/-3% and 12+/-2% of the entire TS PCSA, respectively. The coefficient of variance of the relative portions were 5-10% for muscle volume and 8-17% for the PCSA.     

The pectoral anatomy of selected Ostariophysi. II. The Cypriniformes and siluriformes

The pectoral myology and osteology of the cyprinoids Notemigonus crysoleucas, the golden shiner, and Catostomus commersonnii, the common white sucker, resemble those of generalized, lower teleosts in structure and function, except in features related to the manipulation of the massive fifth ceratobranchial of cyprinoids by muscles attaching on the girdle. Catostomus is more specialized in having unique intercostal muscles to the girdle, complex subclavian arteries and lack of a superficial trapezius muscle. The bony pectoral anatomy of the siluriform, Ictalurus nebulosus, the brown bullhead, is highly specialized in relation to the presence and locking of the massive pectoral spine which is formed of fused dorsal and ventral propterygial rays; there is consolidation of the girdle through fusion of bones, presence of unique stabilizing bony structures, firm symphyseal union of bilateral girdles and the presence of friction-surfaces of girdle and spine for locking. The movements of the spine are specialized in the greater guidance offered by the girdle. Myological specializations are related mainly to ventral appendicular muscles which lock the spine. The nervous and arterial systems are generalized.     

Abdominal muscles dominate contributions to vertebral joint stiffness during the push-up

The goal of this study was to quantify the relative contributions of each muscle group surrounding the spine to vertebral joint rotational stiffness (VJRS) during the push-up exercise. Upper-body kinematics, three-dimensional hand forces and lumbar spine postures, and 14 channels (bilaterally from rectus abdominis, external oblique, internal oblique, latissimus dorsi, thoracic erector spinae, lumbar erector spinae, and multifidus) of trunk electromyographic (EMG) activity were collected from 11 males and used as inputs to a biomechanical model that determined the individual contributions of 10 muscle groups surrounding the lumbar spine to VJRS at five lumbar vertebral joints (L1-L2 to L5-S1). On average, the abdominal muscles contributed 64.32 +/- 8.50%, 86.55 +/- 1.13%, and 83.84 +/- 1.95% to VJRS about the flexion/extension, lateral bend, and axial twist axes, respectively. Rectus abdominis contributed 43.16 +/- 3.44% to VJRS about the flexion/extension axis at each lumbar joint, and external oblique and internal oblique, respectively contributed 52.61 +/- 7.73% and 62.13 +/- 8.71% to VJRS about the lateral bend and axial twist axes, respectively, at all lumbar joints with the exception of L5-S1. Owing to changes in moment arm length, the external oblique and internal oblique, respectively contributed 55.89% and 50.01% to VJRS about the axial twist and lateral bend axes at L5-S1. Transversus abdominis, multifidus, and the spine extensors contributed minimally to VJRS during the push-up exercise. The push-up challenges the abdominal musculature to maintain VJRS. The orientation of the abdominal muscles suggests that each muscle primarily controls the rotational stiffness about a single axis.     

A comparison of lumbar spine and muscle loading between male and female workers during box transfers

There is a clear relationship between lumbar spine loading and back musculoskeletal disorders in manual materials handling. The incidence of back disorders is greater in women than men, and for similar work demands females are functioning closer to their physiological limit. It is crucial to study loading on the spine musculoskeletal system with actual handlers, including females, to better understand the risk of back disorders. Extrapolation from biomechanical studies conducted on unexperienced subjects (mainly males) might not be applicable to actual female workers. For male workers, expertise changes the lumbar spine flexion, passive spine resistance, and active/passive muscle forces. However, experienced females select similar postures to those of novices when spine loading is critical. This study proposes that the techniques adopted by male experts, male novices, and females (with considerable experience but not categorized as experts) impact their lumbar spine musculoskeletal systems differently. Spinal loads, muscle forces, and passive resistance (muscle and ligamentous spine) were predicted by a multi-joint EMG-assisted optimization musculoskeletal model of the lumbar spine. Expert males flexed their lumbar spine less (avg. 21.9° vs 30.3–31.7°) and showed decreased passive internal moments (muscle avg. 8.9% vs 15.9–16.0%; spine avg. 4.7% vs 7.1–7.8%) and increased active internal moments (avg. 72.9% vs 62.0–63.9%), thus producing a different impact on their lumbar spine musculoskeletal systems. Experienced females sustained the highest relative spine loads (compression avg. 7.3 N/BW vs 6.2–6.4 N/BW; shear avg. 2.3 N/BW vs 1.7–1.8 N/BW) in addition to passive muscle and ligamentous spine resistance similar to novices. Combined with smaller body size, less strength, and the sequential lifting technique used by females, this could potentially mean greater risk of back injury. Workers should be trained early to limit excessive and repetitive stretching of their lumbar spine passive tissues.     

Plane of vertebral movement eliciting muscle lengthening history in the low back influences the decrease in muscle spindle responsiveness of the cat

Proprioceptive feedback is thought to play a significant role in controlling both lumbopelvic and intervertebral orientations. In the lumbar spine, a vertebra's positional history along the dorsal-ventral axis has been shown to alter the position, movement, and velocity sensitivity of muscle spindles in the multifidus and longissimus muscles. These effects appear due to muscle history. Because spinal motion segments have up to 6 degrees of freedom for movement, we were interested in whether the axis along which the history is applied differentially affects paraspinal muscle spindles. We tested the null hypothesis that the loading axis, which creates a vertebra's positional history, has no effect on a lumbar muscle spindle's subsequent response to vertebral position or movement. Identical displacements were applied along three orthogonal axes directly at the L(6) spinous process using a feedback motor system under displacement control. Single-unit nerve activity was recorded from 60 muscle spindle afferents in teased filaments from L(6) dorsal rootlets innervating intact longissimus or multifidus muscles of deeply anesthetized cats. Muscle lengthening histories along the caudal-cranial and dorsal-ventral axis, compared with the left-right axis, produced significantly greater reductions in spindle responses to vertebral position and movement. The spinal anatomy suggested that the effect of a lengthening history is greatest when that history had occurred along an axis lying within the anatomical plane of the facet joint. Speculation is made that the interaction between normal spinal mechanics and the inherent thixotropic property of muscle spindles poses a challenge for feedback and feedforward motor control of the lumbar spine.     

Spinal stiffness increases with axial load: another stabilizing consequence of muscle action.

This paper addresses the role of lumbar spinal motion segment stiffness in spinal stability. The stability of the lumbar spine was modelled with loadings of 30 Nm or 60 Nm efforts about each of the three principal axes, together with the partial body weight above the lumbar spine. Two assumptions about motion segment stiffness were made: first the stiffness was represented by an 'equivalent beam' with constant stiffness properties; second the stiffness was updated based on the motion segment axial loading using a relationship determined experimentally from human lumbar spinal specimens tested with 0, 250 and 500 N of axial compressive preload. Two physiologically plausible muscle activation strategies were used in turn for calculating the muscle forces required for equilibrium. Stability analyses provided estimates of the minimum muscle stiffness required for stability. These critical muscle stiffness values decreased when preload effects were used in estimating spinal stiffness in all cases of loadings and muscle activation strategies, indicating that stability increased. These analytical findings emphasize that the spinal stiffness (as well as muscular stiffness) is important in maintaining spinal stability, and that the stiffness-increasing effect of 'preloading' should be taken into account in stability analyses.     

LBNP treadmill exercise maintains spine function and muscle strength in identical twins during 28-day simulated microgravity.

The purpose of this study was to determine whether lower body negative pressure (LBNP) treadmill exercise maintains lumbar spinal compressive properties, curvature, and back muscle strength after 28 days of 6 degrees head-down tilt (HDT) bed rest (BR). We hypothesize that LBNP treadmill exercise will maintain lumbar spine compressibility, lumbar lordosis and back muscle strength after 28 days of 6 degrees HDT bed rest. Fifteen healthy identical twin pairs (14 women and 16 men) participated in this study. One identical twin was randomly assigned to the nonexercise control (Con) group, and their sibling was assigned to the exercise (Ex) group. The lumbar spine was significantly more compressible Post-BR compared with Pre-BR in the Con (P=0.01). Lumbar spine compressibility Post-BR was not significantly different compared with Pre-BR in the Ex group (P=0.89). In both the Con and Ex groups, there were no significant changes Post-BR in lumbar lordosis compared with Pre-BR. Back muscle strength significantly decreased in the Con group Post-BR (P=0.002), whereas in the Ex group back muscle strength was not significantly different from Pre-BR values. A significant increase in lumbar spine compressibility in the Con group suggests that spinal deconditioning to gravity occurs during 28-day bed rest. Changes in the mechanical properties of the lumbar spine may be an early indicator of lumbar intervertebral disk degeneration. Supine LBNP treadmill exercise provides axial loads to the lumbar spine and may prevent lumbar spine deconditioning associated with HDT bed rest.     

Are coupled rotations in the lumbar spine largely due to the osseo-ligamentous anatomy?--a modeling study

Prior studies have found that primary rotations in the lumbar spine are accompanied by coupled out-of-plane rotations. However, it is not clear whether these accompanying rotations are primarily due to passive (discs, ligaments and facet joints) or active (muscles) spinal anatomy. The aim of this study was to use a finite element (FE) model of the lumbar spine to predict three-dimensional coupled rotations between the lumbar vertebrae, due to passive spinal structures alone. The FE model was subjected to physiologically observed whole lumbar spine rotations about in vivo centres of rotation. Model predictions were validated by comparison of intra-discal pressures and primary rotations with in vivo measurements and these showed close agreement. Predicted coupled rotations matched in vivo measurements for all primary motions except lateral bending. We suggest that coupled rotations accompanying primary motions in the sagittal (flexion/extension) and transverse (axial rotation) planes are primarily due to passive spinal structures. For lateral bending the muscles most likely play a key role in the coupled rotation of the spine.     

A frontal plane model of the lumbar spine subjected to a follower load: implications for the role of muscles

Compression on the lumbar spine is 1000 N for standing and walking and is higher during lifting. Ex vivo experiments show it buckles under a vertical load of 80-100 N. Conversely, the whole lumbar spine can support physiologic compressive loads without large displacements when the load is applied along a follower path that approximates the tangent to the curve of the lumbar spine. This study utilized a two-dimensional beam-column model of the lumbar spine in the frontal plane under gravitational and active muscle loads to address the following question: Can trunk muscle activation cause the path of the internal force resultant to approximate the tangent to the spinal curve and allow the lumbar spine to support compressive loads of physiologic magnitudes? The study identified muscle activation patterns that maintained the lumbar spine model under compressive follower load, resulting in the minimization of internal shear forces and bending moments simultaneously at all lumbar levels. The internal force resultant was compressive, and the lumbar spine model, loaded in compression along the follower load path, supported compressive loads of physiologic magnitudes with minimal change in curvature in the frontal plane. Trunk muscles may coactivate to generate a follower load path and allow the ligamentous lumbar spine to support physiologic compressive loads.     

Effects of external trunk loads on lumbar spine stability

Stability of the lumbar spine is an important factor in determining spinal response to sudden loading. Using two different methods, this study evaluated how various trunk load magnitudes and directions affect lumbar spine stability. The first method was a quick release procedure in which effective trunk stiffness and stability were calculated from trunk kinematic response to a resisted-force release. The second method combined trunk muscle EMG data with a biomechanical model to calculate lumbar spine stability. Twelve subjects were tested in trunk flexion, extension, and lateral bending under nine permutations of vertical and horizontal trunk loading. The vertical load values were set at 0, 20, and 40% of the subject's body weight (BW). The horizontal loads were 0, 10, and 20% of BW. Effective spine stability as obtained from quick release experimentation increased significantly (p<0.01) with increased vertical and horizontal loading. It ranged from 785 (S.D.=580) Nm/rad under no-load conditions to 2200 (S.D.=1015) Nm/rad when the maximum horizontal and vertical loads were applied to the trunk simultaneously. Stability of the lumbar spine achieved prior to force release and estimated from the biomechanical model explained approximately 50% of variance in the effective spine stability obtained from quick release trials in extension and lateral bending (0.53相似文献   

A model-based approach for estimation of changes in lumbar segmental kinematics associated with alterations in trunk muscle forces

The kinematics information from imaging, if combined with optimization-based biomechanical models, may provide a unique platform for personalized assessment of trunk muscle forces (TMFs). Such a method, however, is feasible only if differences in lumbar spine kinematics due to differences in TMFs can be captured by the current imaging techniques. A finite element model of the spine within an optimization procedure was used to estimate segmental kinematics of lumbar spine associated with five different sets of TMFs. Each set of TMFs was associated with a hypothetical trunk neuromuscular strategy that optimized one aspect of lower back biomechanics. For each set of TMFs, the segmental kinematics of lumbar spine was estimated for a single static trunk flexed posture involving, respectively, 40° and 10° of thoracic and pelvic rotations. Minimum changes in the angular and translational deformations of a motion segment with alterations in TMFs ranged from 0° to 0.7° and 0 mm to 0.04 mm, respectively. Maximum changes in the angular and translational deformations of a motion segment with alterations in TMFs ranged from 2.4° to 7.6° and 0.11 mm to 0.39 mm, respectively. The differences in kinematics of lumbar segments between each combination of two sets of TMFs in 97% of cases for angular deformation and 55% of cases for translational deformation were within the reported accuracy of current imaging techniques. Therefore, it might be possible to use image-based kinematics of lumbar segments along with computational modeling for personalized assessment of TMFs.