A fluorescent chemosensor based on naphthol for detection of Zn2+

A simple naphthol‐based fluorescent receptor 1 was prepared and evaluated for its fluorescence response to heavy metal ions. Receptor 1 exhibits an ‘off‐on‐type’ mode with high selectivity in the presence of Zn²⁺ ion. The selectivity of 1 for Zn²⁺ is the consequence of combined effects of chelation‐enhanced fluorescence (CHEF), C = N isomerization and π–π stacking interaction between the two naphthalene rings. Copyright © 2015 John Wiley & Sons, Ltd.     

Development of highly selective fluorescent ferrocenyl-iminopyridine chemosensor for biologically relevant Fe3+

Design, synthesis, characterization, and ion detection studies of two ferrocene-appended Schiff bases namely N-(2-[ferrocenylamino]ethyl)-5-nitropyridin-2-amine ( 1 ) and ferrocenylamino-1H-imidazole-4-carboxamide ( 2 ) been reported. Both the chemosensors have been thoroughly characterized using Fourier transfer infrared, ¹H and ¹³C nuclear magnetic resonance, high resolution mass spectrometry, and ultraviolet/visible (UV/visible) and fluorescence spectral techniques. Probes 1 and 2 were designed with the aim of appending the ferrocenyl group with pyridine ring having an amine substitution (for 1 ) and imidazole ring with an amide substitution (for 2 ). Interaction of these probes with a series of cations and anions was examined through UV/vis and fluorescence spectral techniques. Probe 2 exhibited an insignificant response towards anions and loss of selectivity for cations, whereas 1 displayed highly selective detection towards biologically important Fe³⁺ in 2:1 (probe:cation) stoichiometry. Notably, none of the cations and anions could interfere the selectivity of Fe³⁺ ensured by 1 in aqueous medium. The limit of detection for Fe³⁺ detection using 1 was determined to be 0.2 ppm. The results strongly suggest that 1 could find promising future application as a chemosensor for Fe³⁺ in biological systems for quantification and qualitative analysis.     

Tetrasubstituted cyclopentenone‐based fluorescent chemosensors for the selective detection of Fe3+ and Cu2+ ions

Fluorescent chemosensors based on 4‐hydroxy cyclopentenones were synthesized by the base catalyzed reaction of 1,5‐diphenyl‐pentane‐1,3,5‐trione with benzil and thenil. The molecule obtained by the benzil reaction was found to be useful for the selective detection of Fe³⁺ by fluorescence turn‐off, while the molecule synthesized by the thenil reaction was useful for selective detection of Cu²⁺ by fluorescent turn‐on. Details of the synthesis, complexation mode, nature of binding, reversibility, and pH studies of the two sensors are discussed. The studies revealed that the sensors were suitable for determining Fe³⁺ and Cu²⁺ content in real water samples.     

A colorimetric and fluorescent chemosensor for selective detection of Cu2+ based on a new diarylethene with a benzophenone hydrazone unit

A new photochromic diarylethene based on benzophenone hydrazone has been synthesized. Its photochromic and fluorescent properties changed upon alternating irradiation with UV /Vis light and adding Cu²⁺/EDTA in methanol, which showed that the diarylethene could be served as a colorimetric and fluorescent chemosensor for selective detection of Cu²⁺ based on internal charge transfer processes. The colorimetric and turn‐off fluorescent selective detection of Cu²⁺ was attributed to the 2:1 complex of the diarylethene and Cu²⁺. The binding constant (Ka ) was 1.53 × 10⁴ L mol^?1 and the limit of detection of the diarylethene for Cu²⁺ was calculated to be 1.45 × 10^?6 mol L^?1. In addition, the metal‐responsive photochromic behavior of diarylethene was applied successfully to the construction of a molecular logic circuit.     

A new benzimidazole‐based selective and sensitive ‘on–off’ fluorescence chemosensor for Cu2+ ions and application in cellular bioimaging

Two new twinborn benzimidazole derivates ( L and A ), which bonded pyridine via the ester space on the opposite and adjacent positions of the benzene ring of benzimidazole respectively, were designed and synthesized. Compound L displayed fluorescence quenching response only towards copper(II) ions (Cu²⁺) in acetonitrile solution with high selectivity and sensitivity. However, compound A presented ‘on–off’ fluorescence response towards a wide range of metal ions to different degrees and did not have selectivity. Furthermore, compound L formed a 1:1 complex with Cu²⁺ and the binding constant between sensor L and Cu²⁺ was high at 6.02 × 10⁴ M^?1. Job's plot, mass spectra, IR spectra, ¹H‐NMR titration and density functional theory (DFT) calculations demonstrated the formation of a 1:1 complex between L and Cu²⁺. Chemosensor L displayed a low limit of detection (3.05 × 10^?6 M) and fast response time (15 s) to Cu²⁺. The Stern–Volmer analysis illustrated that the fluorescence quenching agreed with the static quenching mode. In addition, the obvious difference of L within HepG2 cells in the presence and absence of Cu²⁺ indicated L had the recognition capability for Cu²⁺ in living cells.     

A highly selective and sensitive turn‐on fluorescent probe for the detection of Al3+ and its bioimaging

A novel fluorescent sensor, 1‐((2‐hydroxynaphthalen‐1‐yl)methylene)urea (ocn) has been designed and applied as a highly selective and sensitive fluorescent probe for recognition of Al³⁺ in Tris–HCl (pH = 7.20) solution. The probe ocn exhibits an excellent selectivity to Al³⁺ over other examined metal ions, anions and amino acids with a prominent fluorescence ‘turn‐on’ at 438 nm. ocn binds to Al³⁺ with a 2:1 binding stoichiometry and the detection limit was 0.3 μM. Furthermore, its capability of biological application was evaluated and the results showed that the sensor could be used to detect Al³⁺ in living cells.     

Facile synthesis of anthracene-appended amino acids as highly selective and sensitive fluorescent Fe3+ ion sensors

We designed new fluorescent chemical sensors for Fe³⁺ ion detection, by conjugating amino acids as receptors into an anthracene fluorophore. The conjugates were synthesized in solid phase by Fmoc-chemistry. Fluorescence sensors containing Asp (1) and Glu (2) both had exclusive selectivity for Fe³⁺ in 100% aqueous solution and in a mixed organic–aqueous solvent system. Other metal ions did not interfere with the detection ability of the sensors for Fe³⁺. The sensors detect Fe³⁺ ions via a chelation-enhanced fluorescent quenching effect. The binding affinity, reversible monitoring, and pH sensitivity of the sensors were investigated. In addition, detection of fluoride ion among halide ions was done by a chemosensing ensemble method with 1–Fe³⁺ and 2–Fe³⁺ complexes.     

Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.     

A highly selective fluorescent chemosensor for Cu2+: synthesis and properties of a rhodamine B‐containing diarylethene

A diarylethene bearing a triazole‐linked rhodamine B unit was synthesized. Its fluorescent emission was significantly enhanced in the presence of protons or Cu²⁺ due to transformation from the pirocyclic form to open‐ring form. The fluorescence was quenched sequentially upon irradiation with 297 nm light based on the intramolecular fluorescence resonance energy transfer mechanism. In an acetonitrile: water binary solvent (1: 1 v /v), the compound showed significant fluorescent enhancement for Cu²⁺ compared with a wide range of tested metal ions with a fast response and a limit of detection of 2.86 × 10^?8 mol L^?1. Using Cu²⁺ and UV light as the chemical inputs, and fluorescence intensity at 597 nm as the output, a logic gate was developed at the molecular level. Moreover, the compound can be used with a high accuracy to detect Cu²⁺ in a natural water sample.     

A naphthalene derivative as ‘turn‐on’ fluorescent chemosensor for the highly selective and sensitive detection of Al3+

A Schiff base compound derived from naphthalene has been synthesized and characterized as an Al³⁺‐selective fluorescent probe. The chemosensor ( L ) exhibits high selectively for Al³⁺ in aqueous solution, even in the presence of biologically relevant cations such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Pb²⁺ and several transition metal ions. There was no observed interference from anions like Br^?, Cl^?, HSO₃^?, SO₃^2?, S₂O₃^2?, NO₂^?, CO₃^2? and AC^?. The lowest detection limit for the chemosensor L was found to be 1.89 × 10^?8 M with a linear response towards Al³⁺ over a concentration range of 5 × 10^?6 to 4 × 10^?5 M. Furthermore, the proposed chemosensor has been used for imaging of Al³⁺ in two different types of cells with satisfying results, which further demonstrates its value for practical application in biological systems.     

Design,synthesis, and evaluation of a selective chemosensor for leucine-rich repeat kinase 2

We describe the design, synthesis, and evaluation of a selective activity probe for leucine-rich repeat kinase 2 (LRRK2), a possible molecular target for the treatment of Parkinson’s disease. Our optimal chemosensor design, termed Nictide-S2, incorporates a phosphorylation-sensitive sulfonamido-oxine fluorophore at an engineered cysteine within the substrate sequence. This design allows for the direct, real-time analysis of LRRK2 kinase activity with a detection limit of 2.5 nM. Under optimized conditions, we measured a Z′ factor of 0.7 demonstrating the potential utility of this assay for inhibitor screening. Off-target kinases capable of phosphorylating Nictide-S2 are identified and an optimized inhibitor cocktail for suppressing background signal is provided. The resulting chemosensor could be utilized to identify LRRK2 inhibitors as well as selectively report on LRRK2 activity in the presence of off-target kinases.     

Formation of fluorescent carbon nanodots from kitchen wastes and their application for detection of Fe3+

This work reports a scalable synthesis of water‐dispersible fluorescent carbon nanodots based on the simple hydrothermal method (180 °C for 6 h) of kitchen wastes (grape peel for example). We discuss the feasibility of synthesis from kitchen wastes both experimentally and theoretically, and the as‐prepared nanodots have high selectivity for Fe³⁺ ions based on fluorescence quenching which is due to the complexes between nanodots and metal ions. Copyright © 2014 John Wiley & Sons, Ltd.     

Pyrazolone as a recognition site: Rhodamine 6G‐based fluorescent probe for the selective recognition of Fe3+ in acetonitrile–aqueous solution

Two novel Rhodamine–pyrazolone‐based colorimetric off–on fluorescent chemosensors for Fe³⁺ ions were designed and synthesized using pyrazolone as the recognition moiety and Rhodamine 6G as the signalling moiety. The photophysical properties and Fe³⁺‐binding properties of sensors L¹ and L² in acetonitrile–aqueous solution were also investigated. Both sensors successfully exhibit a remarkably ‘turn‐on’ response, toward Fe³⁺, which was attributed to 1: 2 complex formation between Fe³⁺ and L¹/L². The fluorescent and colorimetric response to Fe³⁺ can be detected by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Copyright © 2014 John Wiley & Sons, Ltd.     

Green synthesis,biological evaluation,molecular docking studies and 3D-QSAR analysis of novel phenylalanine linked quinazoline-4(3H)-one-sulphonamide hybrid entities distorting the malarial reductase activity in folate pathway

A modified Grimmel's method for N-heterocyclization of phenylalanine linked sulphonamide side arm at position-2 was optimized leading to 2,3-disustituted-4-quinazolin-(3H)-ones. Further, [Bmim][BF₄]-H2O (IL) was used as green solvent as well as catalyst for the synthesis of twenty two hybrid quinazolinone motifs (4a-4v) by N-heterocyclization reaction using microwave irradiation technique. The in vitro screening of the hybrid entities against the malarial species Plasmodium falciparum yielded five potent molecules 4l, 4n, 4r, 4t & 4u owing comparable antimalarial activity to the reference drugs. In continuation, an in silico study was carried out to obtain a pharmacophoric model and quantitative structure activity relationship. We also built a 3D-QSAR model to procure more information that could be applied to design new molecules with more potent Pf-DHFR inhibitory activity. The designed pharmacophore was recognized to be more potent for the selected molecules, exhibiting five pharmacophoric features. The active scaffolds were further evaluated for enzyme inhibition efficacy against alleged receptor Pf-DHFR computationally and in vitro, proving their candidature as lead dihydrofolate reductase inhibitors as well as the selectivity of the test candidates was ascertained by toxicity study against vero cells. The perception of good oral bioavailability was also proved by study of pharmacokinetic properties.     

Facile and greener hydrothermal honey-based synthesis of Fe3O 4/Au core/shell nanoparticles for drug delivery applications

In the present research, we report a greener, faster, and low-cost synthesis of gold-coated iron oxide nanoparticles (Fe₃O₄/Au-NPs) by different ratios (1:1, 2:1, and 3:1 molar ratio) of iron oxide and gold with natural honey (0.5% w/v) under hydrothermal conditions for 20 minutes. Honey was used as the reducing and stabilizing agent, respectively. The nanoparticles were characterized by X-ray diffraction (XRD), UV-visible spectroscopy, field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDXS), transmission electron microscopy (TEM), selected area electron diffraction (SAED), vibrating sample magnetometer (VSM), and fourier transformed infrared spectroscopy (FT-IR). The XRD analysis indicated the presence of Fe₃O₄/Au-NPs, while the TEM images showed the formation of Fe₃O₄/Au-NPs with diameter range between 3.49 nm and 4.11 nm. The VSM study demonstrated that the magnetic properties were decreased in the Fe₃O₄/Au-NPs compared with the Fe₃O₄-NPs. The cytotoxicity threshold of Fe₃O₄/Au-NPs in the WEHI164 cells was determined by using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. It was demonstrated no significant toxicity in higher concentration up to 140.0 ppm which can become the main candidates for biological and biomedical applications, such as drug delivery.     

A selective and sensitive turn-on chemosensor for detection of Fe3+ in aqueous solution and its cell imaging in dorsal root ganglia neurons and MKN-45 cells

A new turn-on fluorescent chemosensor (RBTM) for Fe³⁺ was designed based on Rhodamine B and a thiocarbonylimidazole moiety. The spectroscopic probe used for characterization of the synthesized system showed 300-fold fluorescence enhancement for the detection of Fe³⁺ with a 1:1 stoichiometry in EtOH/H₂O solution (2:1, v/v, HEPES buffer, 1 mM, pH 7.30). Upon addition of Fe³⁺ in aqueous ethanol, the probe displayed a significant fluorescence enhancement and a distinct color change (colorless to pink) that can be detected by the naked eye. The binding constant between the probe and Fe³⁺ was determined to be 1.16 × 10⁴ M⁻¹ and the corresponding detection limit was calculated to be 0.256 µM. In addition, the energy gaps between the HOMO and LUMO in RBTM and RBTM-Fe³⁺ were calculated using DFT calculations to be 92.93 kcal/mol and 37.49 kcal/mol, respectively. The results indicate that binding of Fe³⁺ to RBTM lowered the HOMO–LUMO energy gap of the complex and stabilized the system. Fluorescence imaging experiments demonstrated that RBTM can be used as a fluorescent probe to detect Fe³⁺ in MKN-45 cells and dorsal root ganglia, thus revealing that RBTM could be used for biological applications.     

Scaffold oriented synthesis. Part 3: design, synthesis and biological evaluation of novel 5-substituted indazoles as potent and selective kinase inhibitors employing [2+3] cycloadditions

We report the synthesis and biological evaluation of 5-substituted indazoles and amino indazoles as kinase inhibitors. The compounds were synthesized in a parallel synthesis fashion from readily available starting materials employing [2+3] cycloaddition reactions and were evaluated against a panel of kinase assays. Potent inhibitors were identified for numerous kinases such as Rock2, Gsk3β, Aurora2 and Jak2.     

Facile synthesis, ex-vivo and in vitro screening of 3-sulfonamide derivative of 5-(4-chlorophenyl)-1-(2,4-dichlorophenyl)-4-methyl-1H-pyrazole-3-carboxylic acid piperidin-1-ylamide (SR141716) a potent CB1 receptor antagonist

Facile synthesis of biaryl pyrazole sulfonamide derivative of 5-(4-chlorophenyl)-1-(2,4-dichlorophenyl)-4-methyl-1H-pyrazole-3-carboxylic acid piperidin-1-ylamide (SR141716, 1) and an investigation of the effect of replacement of the –CO group in the compound 1 by the –SO₂ group in the aminopiperidine region is reported. Primary ex-vivo pharmacological testing and in vitro screening of sulfonamide derivative 2 showed the loss of CB1 receptor antagonism.