Colicin N binds to the periphery of its receptor and translocator, outer membrane protein F

Colicins kill Escherichia coli after translocation across the outer membrane. Colicin N displays an unusually simple translocation pathway, using the outer membrane protein F (OmpF) as both receptor and translocator. Studies of this binary complex may therefore reveal a significant component of the translocation pathway. Here we show that, in 2D crystals, colicin is found outside the porin trimer, suggesting that translocation may occur at the protein-lipid interface. The major lipid of the outer leaflet interface is lipopolysaccharide (LPS). It is further shown that colicin N binding displaces OmpF-bound LPS. The N-terminal helix of the pore-forming domain, which is not required for pore formation, rearranges and binds to OmpF. Colicin N also binds artificial OmpF dimers, indicating that trimeric symmetry plays no part in the interaction. The data indicate that colicin is closely associated with the OmpF-lipid interface, providing evidence that this peripheral pathway may play a role in colicin transmembrane transport.     

Colicin occlusion of OmpF and TolC channels: outer membrane translocons for colicin import

The interaction of colicins with target cells is a paradigm for protein import. To enter cells, bactericidal colicins parasitize Escherichia coli outer membrane receptors whose physiological purpose is the import of essential metabolites. Colicins E1 and E3 initially bind to the BtuB receptor, whose beta-barrel pore is occluded by an N-terminal globular "plug". The x-ray structure of a complex of BtuB with the coiled-coil BtuB-binding domain of colicin E3 did not reveal displacement of the BtuB plug that would allow passage of the colicin (Kurisu, G., S. D. Zakharov, M. V. Zhalnina, S. Bano, V. Y. Eroukova, T. I. Rokitskaya, Y. N. Antonenko, M. C. Wiener, and W. A. Cramer. 2003. Nat. Struct. Biol. 10:948-954). This correlates with the inability of BtuB to form ion channels in planar bilayers, shown in this work, suggesting that an additional outer membrane protein(s) is required for colicin import across the outer membrane. The identity and interaction properties of this OMP were analyzed in planar bilayer experiments.OmpF and TolC channels in planar bilayers were occluded by colicins E3 and E1, respectively, from the trans-side of the membrane. Occlusion was dependent upon a cis-negative transmembrane potential. A positive potential reversibly opened OmpF and TolC channels. Colicin N, which uses only OmpF for entry, occludes OmpF in planar bilayers with the same orientation constraints as colicins E1 and E3. The OmpF recognition sites of colicins E3 and N, and the TolC recognition site of colicin E1, were found to reside in the N-terminal translocation domains. These data are considered in the context of a two-receptor translocon model for colicin entry into cells.     

OmpF enhances the ability of BtuB to protect susceptible Escherichia coli cells from colicin E9 cytotoxicity

The outer membrane (OM) vitamin B(12) receptor, BtuB, is the primary receptor for E group colicin adsorption to Escherichia coli. Cell death by this family of toxins requires the OM porin OmpF but its role remains elusive. We show that OmpF enhances the ability of purified BtuB to protect bacteria against the endonuclease colicin E9, demonstrating either that the two OM proteins form the functional receptor or that OmpF is recruited for subsequent translocation of the bacteriocin. While stable binary colicin E9-BtuB complexes could be readily shown in vitro, OmpF-containing complexes could not be detected, implying that OmpF association with the BtuB-colicin complex, while necessary, must be weak and/or transient in nature.     

Low resolution structure and dynamics of a colicin-receptor complex determined by neutron scattering

Proteins that translocate across cell membranes need to overcome a significant hydrophobic barrier. This is usually accomplished via specialized protein complexes, which provide a polar transmembrane pore. Exceptions to this include bacterial toxins, which insert into and cross the lipid bilayer itself. We are studying the mechanism by which large antibacterial proteins enter Escherichia coli via specific outer membrane proteins. Here we describe the use of neutron scattering to investigate the interaction of colicin N with its outer membrane receptor protein OmpF. The positions of lipids, colicin N, and OmpF were separately resolved within complex structures by the use of selective deuteration. Neutron reflectivity showed, in real time, that OmpF mediates the insertion of colicin N into lipid monolayers. This data were complemented by Brewster Angle Microscopy images, which showed a lateral association of OmpF in the presence of colicin N. Small angle neutron scattering experiments then defined the three-dimensional structure of the colicin N-OmpF complex. This revealed that colicin N unfolds and binds to the OmpF-lipid interface. The implications of this unfolding step for colicin translocation across membranes are discussed.     

Comparison of the uptake systems for the entry of various BtuB group colicins into Escherichia coli

Colicins A, E1, E2 and E3 belong to the BtuB group of colicins. The NH2-terminal region of colicin A is required for translocation, and defects in this region cannot be overcome by osmotic shock of sensitive cells. In addition to BtuB, colicin A requires OmpF for efficient uptake by sensitive cells. The roles of BtuB and OmpF in translocation and binding to the receptor of the colicins A, E1, E2 and E3 were compared. The results suggest that for colicin A OmpF is used both as a receptor and for translocation across the outer membrane. In contrast, for colicin E1, OmpF is used neither as a receptor nor for translocation. For colicins E2 and E3, the situation is intermediate: only BtuB is used as a receptor but both BtuB and OmpF are involved in the translocation step.     

Primary events in the colicin translocon: FRET analysis of colicin unfolding initiated by binding to BtuB and OmpF

Cellular import of colicin E3 is initiated by high affinity binding of the colicin receptor-binding (R) domain to the vitamin B(12) (BtuB) receptor in the Escherichia coli outer membrane. The BtuB binding site, at the apex of its extended coiled-coil R-domain, is distant from the C-terminal nuclease domain that must be imported for expression of cytotoxicity. Based on genetic analysis and previously determined crystal structures of the R-domain bound to BtuB, and of an N-terminal disordered segment of the translocation (T) domain inserted into the OmpF porin, a translocon model for colicin import has been inferred. Implicit in the model is the requirement for unfolding of the colicin segments inserted into OmpF. FRET analysis was employed to study colicin unfolding upon interaction with BtuB and OmpF. A novel method of Cys-specific dual labeling of a native polypeptide, which allows precise placement of donor and acceptor fluorescent dyes on the same polypeptide chain, was developed. A decrease in FRET efficiency between the translocation and cytotoxic domains of the colicin E3 was observed upon colicin binding in vitro to BtuB or OmpF. The two events were independent and additive. The colicin interactions with BtuB and OmpF have a major electrostatic component. The R-domain Arg399 is responsible for electrostatic interaction with BtuB. It is concluded that free energy for colicin unfolding is provided by binding of the R- domain to BtuB and binding/insertion of the T-domain to/into OmpF.     

Daring to be different: colicin N finds another way

The mechanisms by which colicins, protein toxins produced by Escherichia coli, kill other E. coli, have become much better understood in recent years. Most colicins initially bind to an outer membrane protein receptor, and then search for a separate nearby outer membrane protein translocator that serves as a pathway into target cells. Many colicins use the outer membrane porin, OmpF, as that translocator, while using a different primary receptor. Colicin N is unique among known colicins in that only OmpF had been identified as being required for uptake of the colicin and it was presumed to somehow serve as both receptor and translocator. Genetic screens also identified a number of genes required for lipopolysaccharide (LPS) synthesis as uniquely required for killing by colicin N, but not by other colicins. Johnson et al. show that the receptor‐binding domain of colicin N binds to LPS, and does not require OmpF for that binding. LPS of a minimal length is required for binding, explaining the requirement for specific elements of the LPS biosynthetic pathway. For colicin N, the receptor‐binding domain does not recognize a protein, but rather the most abundant component of the outer membrane itself, LPS.     

Gene encoding a hybrid OmpF-PhoE pore protein in the outer membrane of Escherichia coli K12

Summary To study the structure-function relationship of outer membrane pore proteins of E. coli K12, a hybrid gene was constructed in which the DNA encoding amino acid residues 2–73 of the mature PhoE protein is replaced by the homologous part of the related ompF gene. The product of this gene is incorporated normally into the outer membrane. It was characterized with respect to its pore activity and its phage receptor and colicin receptor properties. It is concluded (i) that the preference of the PhoE protein pore for negatively charged solutes is partly determined by the amino terminal 73 amino acids, (ii) that part of the receptor site of PhoE protein for phage TC45 is located in this part of the protein, (iii) that colicin N uses OmpF protein as (part of) its receptor, (iv) that the specificity of OmpF protein as a colicin N receptor is completely located within the 80 amino terminal amino acid residues, whereas the specificity of this protein as a colicin A receptor is completely located within the 260 carboxy terminal amino acid residues, and (v) that the amino terminal 73 amino acid residues of PhoE protein span the membrane at least once.     

Colicin pore-forming domains bind to Escherichia coli trimeric porins

Colicin N kills sensitive Escherichia coli cells by first binding to its trimeric receptor (OmpF) via its receptor binding domain. It then uses OmpF to translocate across the outer membrane and in the process it also needs domains II and III of the protein TolA. Recent studies have demonstrated sodium dodecyl sulfate- (SDS) dependent complex formation between trimeric porins and TolA-II. Here we demonstrate that colicin N forms similar complexes with the same trimeric porins and that this association is unexpectedly solely dependent upon the pore-forming domain (P-domain). No binding was seen with the monomeric porin OmpA. In mixtures of P-domain and TolA with OmpF porin, only binary and no ternary complexes were observed, suggesting that binding of these proteins to the porin is mutually exclusive. Pull-down assays in solution show that porin-P-domain complexes also form in the presence of outer membrane lipopolysaccharide. This indicates that an additional colicin-porin interaction may occur within the outer membrane, one that involves the colicin pore domain rather than the receptor-binding domain. This may help to explain the role of porins and TolA-II in the later stages of colicin translocation.     

Crystal structures of the OmpF porin: function in a colicin translocon

The OmpF porin in the Escherichia coli outer membrane (OM) is required for the cytotoxic action of group A colicins, which are proposed to insert their translocation and active domains through OmpF pores. A crystal structure was sought of OmpF with an inserted colicin segment. A 1.6 A OmpF structure, obtained from crystals formed in 1 M Mg2+, has one Mg2+ bound in the selectivity filter between Asp113 and Glu117 of loop 3. Co-crystallization of OmpF with the unfolded 83 residue glycine-rich N-terminal segment of colicin E3 (T83) that occludes OmpF ion channels yielded a 3.0 A structure with inserted T83, which was obtained without Mg2+ as was T83 binding to OmpF. The incremental electron density could be modelled as an extended poly-glycine peptide of at least seven residues. It overlapped the Mg2+ binding site obtained without T83, explaining the absence of peptide binding in the presence of Mg2+. Involvement of OmpF in colicin passage through the OM was further documented by immuno-extraction of an OM complex, the colicin translocon, consisting of colicin E3, BtuB and OmpF.     

Dynamic aspects of colicin N translocation through the Escherichia coli outer membrane.

Colicin N is a bacteriocin that kills sensitive Escherichia coli cells. After binding to the cell surface-exposed receptor, a short period exists when a significant number of the cell-associated colicin N molecules are sensitive to external enzymes. Two colicin N populations are discriminated by proteases: the susceptible pool bound to OmpF porin on the cell surface and another population corresponding to protease-inaccessible colicin N. During translocation, colicin N reaches the periplasmic space and proteolytic cleavage of the colicin occurs only when the outer membrane barrier is permeabilized.     

Colicin A receptor: role of two Escherichia coli outer membrane proteins (OmpF protein and btuB gene product) and lipopolysaccharide.

ompF cells were completely resistant to colicin A, whereas btuB cells were partially resistant. The OmpF protein, in the presence of added lipopolysaccharide, inactivated colicin A. This inactivation was enhanced by added btuB gene product, btuB gene product with lipopolysaccharide did not inactivate colicin A. These data, together with the observation that vitamin B12 protected btuB+ cells from the killing effect of colicin A, suggest that the colicin A receptor in Escherichia coli K-12 is composed of the OmpF protein, the btuB gene product, and lipopolysaccharide.     

Individual domains of colicins confer specificity in colicin uptake, in pore-properties and in immunity requirement.

Six different hybrid colicins were constructed by recombining various domains of the two pore-forming colicins A and E1. These hybrid colicins were purified and their properties were studied. All of them were active against sensitive cells, although to varying degrees. From the results, one can conclude that: (1) the binding site of OmpF is located in the N-terminal domain of colicin A; (2) the OmpF, TolB and TolR dependence for translocation is also located in this domain; (3) the TolC dependence for colicin E1 is located in the N-terminal domain of colicin E1; (4) the 183 N-terminal amino acid residues of colicin E1 are sufficient to promote E1AA uptake and thus probably colicin E1 uptake; (5) there is an interaction between the central domain and C-terminal domain of colicin A; (6) the individual functioning of different domains in various hybrids suggests that domain interactions can be reconstituted in hybrids that are fully active, whereas in others that are much less active, non-proper domain interactions may interfere with translocation; (7) there is a specific recognition of the C-terminal domains of colicin A and colicin E1 by their respective immunity proteins.     

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin,but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.     

The colicin E3 outer membrane translocon: immunity protein release allows interaction of the cytotoxic domain with OmpF porin

The crystal structure previously obtained for the complex of BtuB and the receptor binding domain of colicin E3 forms a basis for further analysis of the mechanism of colicin import through the bacterial outer membrane. Together with genetic analysis and studies on colicin occlusion of OmpF channels, this implied a colicin translocon consisting of BtuB and OmpF that would transfer the C-terminal cytotoxic domain (C96) of colicin E3 through the Escherichia coli outer membrane. This model does not, however, explain how the colicin attains the unfolded conformation necessary for transfer. Such a conformation change would require removal of the immunity (Imm) protein, which is bound tightly in a complex with the folded colicin E3. In the present study, it was possible to obtain reversible removal of Imm in vitro in a single column chromatography step without colicin denaturation. This resulted in a mostly unordered secondary structure of the cytotoxic domain and a large decrease in stability, which was also found in the receptor binding domain. These structure changes were documented by near- and far-UV circular dichroism and intrinsic tryptophan fluorescence. Reconstitution of Imm in a complex with C96 or colicin E3 restored the native structure. C96 depleted of Imm, in contrast to the native complex with Imm, efficiently occluded OmpF channels, implying that the presence of tightly bound Imm prevents its unfolding and utilization of the OmpF porin for subsequent import of the cytotoxic domain.     

A molecular, genetic and immunological approach to the functioning of colicin A, a pore-forming protein

We have constructed, by recombinant DNA techniques, one hybrid protein, colicin A-beta-lactamase (P24), and two modified colicin As, one (P44) lacking a large central domain and the other (PX-345) with a different C-terminal region. The regulation of synthesis, the release into the medium and the properties of these proteins were studied. Only P44 was released into the medium. This suggests that both ends of the colicin A polypeptide chain might be required for colicin release. None of the three proteins was active on sensitive cells in an assay in vivo. However, P44 was able to form voltage-dependent channels in phospholipid planar bilayers. Its lack of activity in vivo is therefore probably caused by the inability to bind to the receptor in the outer membrane. PX-345 is a colicin in which the last 43 amino acids of colicin A have been replaced by 27 amino acids encoded by another reading frame in the same region of the colicin A structural gene; it was totally unable to form pores in planar bilayers at neutral pH but showed a very slight activity at acidic pH. These results confirm that the C-terminal domain of colicin A is involved in pore formation and indicate that at least the 43 C-terminal amino acid residues of this domain play a significant role in pore formation or pore function. Fifteen monoclonal antibodies directed against colicin A have been isolated by using conventional techniques. Five out of the 15 monoclonal antibodies could preferentially recognize wild-type colicin A. In addition, the altered forms of the colicin A polypeptide were used to map the epitopes of ten monoclonal antibodies reacting specifically with colicin A. Some of the antibodies did not bind to colicin A when it was pre-incubated at acidic pH suggesting that colicin A undergoes conformational change at about pH 4. The effects of monoclonal antibodies on activity in vivo of colicin A were investigated. The degree of inhibition observed was related to the location of the epitopes, with monoclonal antibodies reacting with the N terminus giving greater inhibition. The monoclonal antibodies directed against the C-terminal region promoted an apparent activation of colicin activity in vivo.     

A genetic engineering approach to study the mode of assembly of the OmpF porin in the envelope of E coli

Inducible hybrid genes encoding two large domains, a periplasmic domain consisting of the PhoS sequence and an outer membrane domain corresponding to various lengths of the OmpF mature sequence were constructed. The synthesized hybrid polypeptides are correctly processed during the early times of induction, their precursor forms being accumulated at later times. These hybrids restore sensitivity toward colicin A to ompF E coli B strain which suggests an outer membrane location. At least 2 of them are indeed localized in the outer membrane after immunogold labelling on ultrathin cryosections. Insertion of a hydrophobic sequence between PhoS and OmpF improves the trimerization and the assembly of the OmpF part. Only the hybrids presenting the last C-terminal 29 residues of OmpF are able to promote the colicin N killing action and to exhibit a trimeric conformation which is recognized by specific antibodies. Moreover, the deletion of the C-terminal region impairs the functional insertion of the OmpF domain; this indicates that the last membrane-spanning region of OmpF is necessary for the correct folding and orientation of the protein in the outer membrane.     

Structure of the complex of the colicin E2 R-domain and its BtuB receptor. The outer membrane colicin translocon

The crystal structure of the complex of the BtuB receptor and the 135-residue coiled-coil receptor-binding R-domain of colicin E3 (E3R135) suggested a novel mechanism for import of colicin proteins across the outer membrane. It was proposed that one function of the R-domain, which extends along the outer membrane surface, is to recruit an additional outer membrane protein(s) to form a translocon for passage colicin activity domain. A 3.5-A crystal structure of the complex of E2R135 and BtuB (E2R135-BtuB) was obtained, which revealed E2R135 bound to BtuB in an oblique orientation identical to that previously found for E3R135. The only significant difference between the two structures was that the bound coiled-coil R-domain of colicin E2, compared with that of colicin E3, was extended by two and five residues at the N and C termini, respectively. There was no detectable displacement of the BtuB plug domain in either structure, implying that colicin is not imported through the outer membrane by BtuB alone. It was concluded that the oblique orientation of the R-domain of the nuclease E colicins has a function in the recruitment of another member(s) of an outer membrane translocon. Screening of porin knock-out mutants showed that either OmpF or OmpC can function in such a translocon. Arg(452) at the R/C-domain interface in colicin E2 was found have an essential role at a putative site of protease cleavage, which would liberate the C-terminal activity domain for passage through the outer membrane translocon.     

The unstructured domain of colicin N kills Escherichia coli

Bacteria often produce toxins which kill competing bacteria. Colicins, produced by and toxic to Escherichia coli bacteria are three‐domain proteins so efficient that one molecule can kill a cell. The C‐terminal domain carries the lethal activity and the central domain is required for surface receptor binding. The N‐terminal domain, required for translocation across the outer membrane, is always intrinsically unstructured. It has always been assumed therefore that the C‐terminal cytotoxic domain is required for the bactericidal activity. Here we report the unexpected finding that in isolation, the 90‐residue unstructured N‐terminal domain of colicin N is cytotoxic. Furthermore it causes ion leakage from cells but, unlike known antimicrobial peptides (AMPs) with this property, shows no membrane binding behaviour. Finally, its activity remains strictly dependent upon the same receptor proteins (OmpF and TolA) used by full‐length colicin N. This mechanism of rapid membrane disruption, via receptor mediated binding of a soluble peptide, may reveal a new target for the development of highly specific antibacterials.     

Colicin import and pore formation: a system for studying protein transport across membranes?

Pore-forming colicins are a family of protein toxins (M_r40–70kDa) produced by Escherichia coli and related bacteria. They are bactericidal by virtue of their ability to form ion channels in the inner membrane of target cells. They provide a useful means of studying questions such as toxin action, polypeptide translocation across and into membranes, voltage-gated channels and receptor function. These colicins bind to a receptor in the outer membrane before being translocated across the cell envelope with the aid of helper proteins that belong to nutrient-uptake systems and the so-called‘Tol’proteins, the function of which has not yet been properly defined. A distinct domain appears to be associated with each of three steps (receptor binding, translocation and formation of voltage-gated channels). The Tol-dependent uptake pathway is described here. The structures and interactions of TolA, B, Q and R have by now been quite clearly defined. Transmembrane α-helix interactions are required for the functional assembly of the E. coli Tol complex, which is preferentially located at contact sites between the inner and outer membranes. The number of colicin translocation sites is about 1000 per cell. The role and the involvement of the OmpF porin (with colicins A and N) have been described in a recent study on the structural and functional interactions of a colicin-resistant mutant of OmpF. The X-ray crystal structure of the channel-forming fragment of colicin A and that of the entire colicin la have provided the basis for biophysical and site-directed muta-genesis studies. Thanks to this powerful combination, it has been established that the interaction with the receptor in the outer membrane leads to a very substantial conformational change, as a result of which the N-terminal domains of colicins interact with the lumen of the OmpF pore and then with the C-terminal domain of TolA. A molten globular conformation of colicins probably constitutes the intermediate translocation/insertion competent state. Once the pore has formed, the polypeptide chain spans the whole cell envelope. Three distinct steps occur in the last stage of the process: (i) fast binding of the C-terminal domain to the outer face of the cytoplasmic membrane; (ii) a slow insertion of the polypeptide chain into the outer face of the inner membrane in the absence of Δψ and (iii) a profound reorganization of the helix association, triggered by the transmembrane potential and resulting in the formation of the colicin channel.