Lyophilized veins as arterial interposition allografts

Venous allografts were evaluated in two models. Lyophilized allograft veins used as interposition grafts in the infrarenal aorta of the canine were studied and found to be patent at 1 year. Pathologic examination of the grafts revealed mild intimal hyperplasia and persistence of the basic structure of the lyophilized vessel. The ability of venous tissue to elicit an antibody response when transplanted into an allogeneic recipient was studied in the rat using the lymphocyte cytotoxicity assay. Fresh and Me₂SO-cryoprotected frozen veins produced circulating antibody when used as interposition grafts in the infrarenal aorta of the rat. Lyophilized and noncryoprotected frozen veins did not induce measurable antibody. Lyophilized allograft veins are a nonimmunogenic vascular graft material with acceptable long-term patency.     

Numerical modeling of simulated blood flow in idealized composite arterial coronary grafts: steady state simulations

This paper presents a comparative study of simulated blood flow in different configurations of simplified composite arterial coronary grafts (CACGs). Even though the composite arterial grafting is increasingly used in cardiac surgery, it is still questionable whether or not the blood flow in such grafts can adequately meet the demands of the native myocardial circulation. A computational fluid dynamics (CFD) model was developed to conduct computer-based studies of simulated blood flow in four different geometric configurations of CACGs, corresponding to routinely used networks in cardiac surgery coronary grafts (T, Y, Pi and sequential). The flow was assumed three-dimensional, laminar and steady and the fluid as Newtonian, while the vessel walls were considered as inelastic and impermeable. It was concluded that local haemodynamics, practically described by velocity, pressure drop, wall shear stress (WSS) and flow rates, may be strongly influenced by the local geometry, especially at the anastomotic sites. The computations were made at mean flow rates of 37.5, 75 and 150ml/min. The side-branch outflow rates, computed for each bypass graft, showed noticeable differences. The results, which were found both qualitatively and quantitatively consistent with other studies, indicate that the Pi-graft exhibits significantly less uniform distribution of outflow rates than the other geometric configurations. Moreover, prominent variations in WSS and velocity distribution among the assessed CACGs were predicted, showing remarkable flow interactions among the arterial branches. The lowest shear stress regions were found on the lateral walls of bifurcations, which are predominantly susceptible to the occurrence of coronary artery disease (CAD). In contrast, the highest WSS were observed at the turn of the arterial branches.     

国产真丝涤纶人造血管的动物应用研究

目的：探讨国产真丝涤纶人造血管动物应用的可行性。方法：以真丝涤纶人造血管行犬的腹主动脉移植。结果：移植后１个月血管腔内表面形成不完善的内膜,外膜纤维组织明显增生;移植后３个月血管腔内表面完全内皮化,外膜部分肉芽组织胶原化;半年至１年内皮细胞排列更加整齐有序,吻合口轻度内膜增生,但无狭窄,外周为致密的纤维组织。结论：真丝涤纶人造血管作为新一代血管代用品是可行的,但其远期通畅率是有待进一步观察。     

Computational model of blood flow in the aorto-coronary bypass graft

Background

Coronary artery bypass grafting surgery is an effective treatment modality for patients with severe coronary artery disease. The conduits used during the surgery include both the arterial and venous conduits. Long- term graft patency rate for the internal mammary arterial graft is superior, but the same is not true for the saphenous vein grafts. At 10 years, more than 50% of the vein grafts would have occluded and many of them are diseased. Why do the saphenous vein grafts fail the test of time? Many causes have been proposed for saphenous graft failure. Some are non-modifiable and the rest are modifiable. Non-modifiable causes include different histological structure of the vein compared to artery, size disparity between coronary artery and saphenous vein. However, researches are more interested in the modifiable causes, such as graft flow dynamics and wall shear stress distribution at the anastomotic sites. Formation of intimal hyperplasia at the anastomotic junction has been implicated as the root cause of long- term graft failure.Many researchers have analyzed the complex flow patterns in the distal sapheno-coronary anastomotic region, using various simulated model in an attempt to explain the site of preferential intimal hyperplasia based on the flow disturbances and differential wall stress distribution. In this paper, the geometrical bypass models (aorto-left coronary bypass graft model and aorto-right coronary bypass graft model) are based on real-life situations. In our models, the dimensions of the aorta, saphenous vein and the coronary artery simulate the actual dimensions at surgery. Both the proximal and distal anastomoses are considered at the same time, and we also take into the consideration the cross-sectional shape change of the venous conduit from circular to elliptical. Contrary to previous works, we have carried out computational fluid dynamics (CFD) study in the entire aorta-graft-perfused artery domain. The results reported here focus on (i) the complex flow patterns both at the proximal and distal anastomotic sites, and (ii) the wall shear stress distribution, which is an important factor that contributes to graft patency.

Methods

The three-dimensional coronary bypass models of the aorto-right coronary bypass and the aorto-left coronary bypass systems are constructed using computational fluid-dynamics software (Fluent 6.0.1). To have a better understanding of the flow dynamics at specific time instants of the cardiac cycle, quasi-steady flow simulations are performed, using a finite-volume approach. The data input to the models are the physiological measurements of flow-rates at (i) the aortic entrance, (ii) the ascending aorta, (iii) the left coronary artery, and (iv) the right coronary artery.

Results

The flow field and the wall shear stress are calculated throughout the cycle, but reported in this paper at two different instants of the cardiac cycle, one at the onset of ejection and the other during mid-diastole for both the right and left aorto-coronary bypass graft models. Plots of velocity-vector and the wall shear stress distributions are displayed in the aorto-graft-coronary arterial flow-field domain. We have shown (i) how the blocked coronary artery is being perfused in systole and diastole, (ii) the flow patterns at the two anastomotic junctions, proximal and distal anastomotic sites, and (iii) the shear stress distributions and their associations with arterial disease.

Conclusion

The computed results have revealed that (i) maximum perfusion of the occluded artery occurs during mid-diastole, and (ii) the maximum wall shear-stress variation is observed around the distal anastomotic region. These results can enable the clinicians to have a better understanding of vein graft disease, and hopefully we can offer a solution to alleviate or delay the occurrence of vein graft disease.

     

A possible role of initial cell death due to mechanical stretch in the regulation of subsequent cell proliferation in experimental vein grafts

 The proliferation of vascular cells contributes to the formation of neointima and hypertrophy of the blood vessel wall. Here we show that mechanical stretch possibly regulates the proliferation of vascular cells via the mediation of cell death in a rat vein graft model. The wall of vein grafts is subject to a suddenly increased mechanical stretch due to exposure to arterial blood pressure. Such a stretch induces rapid cell death with a reduction in cell density by ∼60% within the first day after surgery. The initial cell death was followed by an increase in the percentage of proliferating cells, as shown by a BrdU incorporation assay (1.55 ± 1.27%, 8.48 ± 2.27%, 11.93 ± 2.36%, 6.36 ± 1.77%, and 5.60 ± 1.46% at days 1, 5, 10, 20, and 30, respectively). When mechanical stretch was reduced by restraining the vein graft using a polytetrafluoroethylene sheath, the percentage of proliferating cells reduced significantly (0.76 ± 0.76%, 1.70 ± 0.46%, 1.29 ± 0.56%, 0.99 ± 0.83%, and 0.47±0.52% at days 1, 5, 10, 20, and 30, respectively). A further reduction in cell density, induced by local administration of a cell death inducer ceramide to experimental vein grafts (without sheath), enhanced subsequent cell proliferation. In contrast, a prevention of cell death, induced by local administration of a cell death inhibitor tetrapeptide-aldehyde DEVD-CHO to experimental vein grafts (without sheath), significantly reduced subsequent cell proliferation. These results suggest that mechanical stretch induces cell death, which possibly mediates subsequent cell proliferation in the present model. Received: 9 September 2001 / Accepted: 19 November 2001     

Numerical study of hemodynamics and wall mechanics in distal end-to-side anastomoses of bypass grafts.

The development and progress of distal anastomotic intimal hyperplasia seems to be promoted by altered flow conditions and intramural stress distributions at the region of the artery-graft junction of vascular bypass configurations. From clinical observations, it is known that intimal hyperplasia preferentially occurs at outflow anastomoses of prosthetic bypass grafts. In order to gain a deeper insight into post-operative disease processes, and subsequently, to contribute to the development of improved vascular reconstructions with respect to long term patency rates, detailed studies are required. In context with in vivo experiments, this study was designed to analyze the flow dynamics and wall mechanics in anatomically correct bypass configurations related to two different surgical techniques and resulting geometries (conventional geometry and Miller-cuff). The influence of geometric conditions and of different compliance of synthetic graft, the host artery and the interposed venous cuff on the hemodynamic behavior and on the wall stresses are investigated. The flow studies apply the time-dependent, three-dimensional Navier-Stokes equations describing the motion of an incompressible Newtonian fluid. The vessel walls are described by a geometrically non-linear shell structure. In an iterative coupling procedure, the two problems are solved by means of the finite element method. The numerical results demonstrate non-physiological flow patterns in the anastomotic region. Strongly skewed axial velocity profiles and high secondary velocities occur downstream the artery-graft junction. On the artery floor opposite the junction, flow separation and zones of recirculation are found. The wall mechanical studies show that increased compliance mismatch leads to increased intramural stresses, and thus, may have a proliferative influence on suture line hyperplasia, as it is observed in the in vivo study.     

Simulation of Flow through a Miller Cuff Bypass Graft

Unnatural temporal and spatial distributions of wall shear stress in the anastomosis of distal bypass grafts have been identified as possible factors in the development of anastomotic intimal hyperplasia in these grafts. Distal bypass graft anastomoses with an autologus vein cuff (a Miller cuff) interposed between the graft and artery have been shown to alleviate the effects of intimal hyperplasia. In this study, pulsatile flow through models of a standard end-to-side anastomosis and a Miller cuff anastomosis are computed and the resulting wall shear stress and pressure distributions analysed. The results are inconclusive, and could be taken to suggest that the unnatural distributions of shear stress that do occur along the anastomosis floor may not be particularly important in the development of intimal hyperplasia. However, it seems more likely that the positive effects of the biological and material properties of the vein cuff, which are not considered in this study, somehow outweigh the negative effects of the shear stress distributions predicted to occur on the floor of the Miller-cuff graft.     

Effect of isolation of periosteum and dura on the healing of rabbit calvarial inlay bone grafts

Little is understood about the role of the recipient site in the revascularization and incorporation of autogenous inlay bone grafts in the craniofacial skeleton. Clinical experience demonstrates that secondary complex cranial vault reconstruction performed with scarred avascular dura or poor soft-tissue coverage may undergo significant resorption, thus compromising the aesthetic outcome. This study was designed to determine the effect of isolating autogenous orthotopic inlay calvarial bone grafts from the surrounding dura and/or periosteum on graft revascularization, healing, and volume maintenance in the adult rabbit. Adult rabbits were randomized into four groups (n = 10 per group); in each rabbit, the authors created a circular, 15-mm in diameter, full-thickness cranial defect followed by reconstruction with an autogenous calvarial bone graft, which was replaced orthotopically and held with microplate fixation. Silicone sheeting (0.5 mm thickness) was used to isolate the dura (group II), the periosteum (group II), or both dura and periosteum (group IV) from the graft interface. No silicone was placed in group I. Animals were killed 10 weeks postoperatively, and calvaria were harvested to assess graft surface area, morphology, quantitative histology, fluorochrome staining, and revascularization. Grafts isolated from both the dura and periosteum exhibited significant decreases in total bone (cortical and trabecular) surface area, blood vessel count, and interface healing compared with nonisolated control grafts. Isolation of either the dura or periosteum significantly (p < 0.05) decreased blood vessel count but had no significant effect on interface healing. Isolation of the dura alone was associated with a significant (p < 0.05) decrease in graft cross-sectional surface area and dural cortical thickness compared with nonisolated control grafts, but this effect was not observed when the periosteum alone was isolated. Quantitative histology performed 10 weeks after surgery indicated that graft isolation was associated with increased marrow fibrosis and necrosis compared with nonisolated controls; it also demonstrated evidence of increased activity in bone remodeling (osteoblast and osteocyte count, new trabecular bone, and surface resorption). Triple fluorochrome staining suggested increased bone turnover in the nonisolated grafts compared with isolated grafts at 1 and 5 weeks postoperatively. This study demonstrates that isolating a rabbit calvarial inlay autogenous bone graft from the dura and/or periosteum results in significantly (p < 0.05) decreased revascularization, interface healing, and cross-sectional areas of amount of mature bone compared with nonisolated control grafts 10 weeks after surgery. At this time point, histologic examination demonstrates a paradoxical increase in bone remodeling in isolated bone grafts compared with controls. It is possible that the inhibition of revascularization results in a delayed onset of the remodeling phase of graft incorporation. However, in the model studied, it is not known whether the quantitative histologic and morphometric parameters measured in these isolated grafts exhibit a "catch-up" phenomenon at time points beyond 10 weeks after surgery. The results of this study emphasize the importance of a healthy recipient site in the healing and incorporation of calvarial bone grafts but stress the need for further investigation at later time points.     

Prevention of mechanical stretch-induced endothelial and smooth muscle cell injury in experimental vein grafts

Vein grafts are subject to increased tensile stress due to exposure to arterial blood pressure, which has been hypothesized to induce endothelial cell (EC) and smooth muscle cell (SMC) injury. This study was designed to verify this hypothesis and to develop a tissue engineering approach that can be used to prevent these pathological events. Two experimental models were created in rats to achieve these goals: (1) a nonengineered vein graft with increased tensile stress, which was created by grafting a jugular vein into the abdominal aorta using a conventional end-to-end anastomotic technique; and (2) an engineered vein graft with reduced tensile stress, which was created by restricting a vein graft into a cylindrical sheath constructed using a polytetrafluoroethylene membrane. The integrity of ECs in these models was examined by using a silver nitrate staining method, and the integrity of SMCs was assessed by using a fluorescein phalloidin-labeling technique. It was found that nonengineered vein grafts were associated with early EC denudation with a change in EC coverage from 100 percent in normal jugular veins to 36 +/- 10, 28 +/- 12, 18 +/- 9, 44 +/- 15, 80 +/- 13, and 97 +/- 6 percent at 1 and 6 hours and 1, 5, 10, and 30 days, respectively. Similarly, rapid SMC actin filament degradation was found during the early period with a change in SMC coverage from approximately 94 percent in normal jugular veins to 80 +/- 10, 41 +/- 17, 25 +/- 9, 51 +/- 15, 79 +/- 15, 98 +/- 2 percent at 1 and 6 hours and 1, 5, 10, and 30 days, respectively, in nonengineered vein grafts. In engineered vein grafts with reduced tensile stress, EC denudation and SMC actin filament degradation were prevented significantly. These results suggested that mechanical stretch due to increased tensile stress contributed to EC and SMC injury in experimental vein grafts, and these pathological events could be partially prevented when tensile stress was reduced by using a biomechanical engineering approach.     

Anastomotic stenting in a porcine aortoiliac graft model

The purpose of the study was to evaluate the feasibility of anastomotic stent application in a porcine aortoiliac graft model. In a total of 10 pigs, a polytetrafluoroethylene aortobi-iliac graft was implanted through a midline abdominal incision. The lower edge of the iliac vessel was graft-inverted about 1 mm to produce irregularities at the downstream anastomosis. After transverse graft incision, six stainless-steel stents, six poly-L-lactic acid (PLLA) stents and four PLLA stents with 10% polycaprolactone (PCL) were implanted at the iliac anastomotic site using a 6 mm balloon dilatation catheter. Four anastomotic sites were left untreated. After two weeks, the patency of graft limbs was evaluated by contrast-enhanced computed tomography (CT). Both metal and polymeric stent designs provided adequate flexibility to manoeuvre across the anastomotic site for expansion in the chosen position. After deployment, the stent-arterial wall contact was complete on a macroscopic view. On CT scan, all metal and PLLA-stented graft limbs were free of stenosis, whereas all PLLA/PCL stents were occluded. The non-stented graft limbs showed a stenosis of 50-70%. In summary, this model is feasible to assess preclinically the deployment and patency rate of an anastomotic stent and to test future stent developments.     

Pulsatile flow visualization in the abdominal aorta under differing physiologic conditions: implications for increased susceptibility to atherosclerosis.

The infrarenal abdominal aorta is a common site for clinically significant atherosclerosis. As has been shown in other susceptible locations, vessel geometry, flow division rates, and pulsatility may result in hemodynamic conditions which influence the preferential localization of disease in the abdominal aorta segment. Pulsatile flow visualization was performed in a glass model of the aorta constructed from measurements of angiograms and cadaver aortas. Flow rates and pulsatile waveforms were varied to reflect typical physiological conditions. Under normal resting conditions, the flow patterns in the infrarenal aorta were more complex than those in the suprarenal location. Time varying vortex patterns appeared at the level of the renal arteries and propagated through the infrarenal aorta into the common iliac arteries. A region of oscillating velocity direction extended from the renal arteries to the aortic bifurcation along the posterior wall. Dye became trapped along the posterior wall, requiring several cardiac cycles for clearance. In contrast, there was rapid clearance of the dye in the anterior aorta. Under postprandial conditions, the flow patterns in the aorta were basically unchanged. Simulated exercise conditions created laminar hemodynamic features very different from the resting conditions, including a decrease in dye residence time. This study reveals significant time-dependent variations in the hemodynamics of the abdominal aorta under differing physiologic conditions. Hemodynamic factors such as low wall shear stress, oscillating shear direction, and high particle residence time may be related to the clinically seen preferential plaque localization in the infrarenal aorta.     

Is there a haemodynamic advantage associated with cuffed arterial anastomoses?

The development of intimal hyperplasia at arterial bypass graft anastomoses is a major factor responsible for graft failure. A revised surgical technique, involving the incorporation of a small section of vein (vein cuff) into the distal anastomosis of PTFE grafts, results in an altered distribution of intimal hyperplasia and improved graft patency rates, especially for below-knee grafts. Numerical simulations have been conducted under physiological conditions to identify the flow behaviour in a typical cuffed bypass model and to determine whether the improved performance of the cuffed system can be accounted for by haemodynamic factors. The flow patterns at the cuffed anastomosis are significantly different to those at the conventional end-to-side anastomosis. In the former case, the flow is characterised by an expansive, low momentum recirculation within the cuff. Separation occurs at the graft heel, and at the cuff toe as the blood enters the recipient artery. Wall shear stresses in the vicinity of the cuff heel are low, but high shear stresses and large spatial gradients in the shearing force act on the artery floor during systole. In contrast, a less disturbed flow prevails and the floor shear stress distribution is less adverse in the conventional model. In conclusion, aspects of the anastomotic haemodynamics are worsened when the cuff is employed. The benefits associated with the cuffed grafts may be related primarily to the presence of venous material at the anastomosis. Therefore, caution is advised with regard to the use of PTFE grafts, pre-shaped to resemble a cuffed geometry.     

Changes in the walls of autologous venous grafts after transplantation into arteries

In 54 dogs 76 operations on plastics of the common carotid arteries with the femoral vein segments have been performed. The animals have been observed for 3 days--1.5 years. The grafts, preserving their permeability, have been studied using a complex of anatomical, histological and micromorphometric techniques. At early stages after the operation (up to 7 days), dystrophic and necrobiotic changes predominate in the wall of the venous graft. As a result of overstretching of the denervated and devascularized vessel, under the effect of a high arterial pressure, nearly total rejection of the endothelial lining takes place, as well as death of some smooth myocytes in the middle tunic; this determines appearance of early thromboses. During 2-6 months after the operation, against the background of a good revascularization of the graft, restorative and adaptive changes develop in its wall. The intima becomes thick at the expense of formation of the obliquely situating layer of myocytes, as well as the result of parietal thromboses organizing on the deendothelized internal surface. These thickenings are especially well seen in the zones of anastomoses. In 6 months--1.5 years after the transplantation into the artery, as a result of constriction of the vessels feeding the graft and reduction of blood stream along them, atrophic and sclerotic changes increase in the wall. The intimal thickenings often acquire the pattern of fibrous patches, that make the lumen more narrow; this can cause appearance of late occlusions and thromboses of the grafts.     

The peritoneum as a natural scaffold for vascular regeneration

Objective

The peritoneum has the same developmental origin as blood vessels, is highly reactive and poorly thrombogenic. We hypothesize that parietal peritoneum can sustain development and regeneration of new vessels.

Methods and Results

The study comprised two experimental approaches. First, to test surgical feasibility and efficacy of the peritoneal vascular autograft, we set up an autologous transplantation procedure in pigs, where a tubularized parietal peritoneal graft was covered with a metal mesh and anastomosed end-to-end in the infrarenal aorta. Second, to dissect the contribution of graft vs host cells to the newly developed vessel wall, we performed human-to-rat peritoneal patch grafting in the abdominal aorta and examined the origin of endothelial and smooth muscle cells. In pig experiments, the graft remodeled to an apparently normal blood vessel, without thrombosis. Histology confirmed arterialization of the graft with complete endothelial coverage and neointimal hyperplasia in the absence of erosion, inflammation or thrombosis. In rats, immunostaining for human mitochondri revealed that endothelial cells and smooth muscle cells rarely were of human origin. Remodeling of the graft was mainly attributable to local cells with no clear evidence of c-kit+ endothelial progenitor cells or c-kit+ resident perivascular progenitor cells.

Conclusions

The parietal peritoneum can be feasibly used as a scaffold to sustain the regeneration of blood vessels, which appears to occur through the contribution of host-derived resident mature cells.     

A novel vein graft model: adaptation to differential flow environments

Accelerated intimal hyperplasia in response to altered flow environment is critical to the process of vein bypass graft failure. Lack of a reproducible animal model for dissecting the mechanisms of vein graft (VG) remodeling has limited progress toward solving this clinically significant problem. Combining a cuffed anastomotic technique with other surgical manipulations, we developed a well-defined, more robust method for studying hemodynamic factors in VG arterialization. VG with fistula placement, complete occlusion, or partial distal branch ligation (DBL) was performed in the carotid artery of 56 rabbits. Extensive hemodynamic and physiological analyses were performed to define the hemodynamic forces and histological adaptations of the wall at 1-28 days. Anastomotic time averaged 12 min, with 100% patency of bilateral grafts and unilateral grafts plus no adjunct or delayed fistula. Bilateral VG-DBL resulted in an immediate disparity in wall shear (0.8 +/- 0.1 vs. 12.4 +/- 1.1 dyn/cm2, ligated vs. contralateral graft). Grafts exposed to low shear stress responded primarily through enhanced intimal thickening (231 +/- 35 vs. 36 +/- 18 microm, low vs. high shear). High-shear-stress grafts adapted through enhanced outward remodeling, with a 24% increase in lumen diameter at 28 days (3.0 +/- 0.1 vs. 3.7 +/- 0.2 mm, low vs. high shear). We have taken advantage of the cuffed anastomotic technique and combined it with a bilateral VG-DBL model to dissect the impact of hemodynamic forces on VG arterialization. This novel model offers a robust, clinically relevant, statistically powerful small animal model for evaluation of high- and low-shear-regulated VG remodeling.     

Simulation of blood flow in a small-diameter vascular graft model with a swirl (spiral) flow guider

Small-diameter vascular grafts are in large demand for coronary and peripheral bypass procedures, but present products still fail in long-term clinical application. In the present communication, a new type of small-diameter graft with a swirl flow guider was proposed to improve graft patency rate. Flow pattern in the graft was simulated numerically and compared with that in a conventional graft. The numerical results revealed that the swirl flow guider could indeed make the blood flow rotate in the new graft. The swirling flow distal to the flow guider significantly altered the flow pattern in the new graft and the ve- locity profiles were re-distributed. Due to the swirling flow, the blood velocity near the vessel wall and wall shear rate were greatly enhanced. We believe that the increased blood velocity near the wall and the wall shear rate can impede the occurrence of acute thrombus formation and intimal hyperplasia, hence can improve the graft patency rate for long-term clinical use.     

Numerical simulation of fluid–structure interaction in bypassed DeBakey III aortic dissection

It was found that bypass graft alone could achieve great effects in treating aortic dissection. In order to investigate the mechanical mechanism and the haemodynamic validity of the bypassing treatment for DeBakey III aortic dissection, patient-specific models of DeBakey III aortic dissection treated with different bypassing strategies were constructed. One of the bypassing strategies is bypassing between ascending aorta and abdominal aorta, and the other is bypassing between left subclavian artery and abdominal aorta. Numerical simulations under physiological flow conditions based on fluid–structure interaction were performed using finite element method. The results show that blood flow velocity, pressure and vessel wall displacement of false lumen are all reduced after bypassing. This phenomenon indicates that bypassing is an effective surgery for the treatment of DeBakey III aortic dissection. The effectiveness to cure through lumen is better when bypassing between left subclavian artery and abdominal aorta, while the effectiveness to cure blind lumen is better when bypassing between ascending aorta and abdominal aorta.     

Local and global geometric influence on steady flow in distal anastomoses of peripheral bypass grafts

We consider the effect of geometrical configuration on the steady flow field of representative geometries from an in vivo anatomical data set of end-to-side distal anastomoses constructed as part of a peripheral bypass graft. Using a geometrical classification technique, we select the anastomoses of three representative patients according to the angle between the graft and proximal host vessels (GPA) and the planarity of the anastomotic configuration. The geometries considered include two surgically tunneled grafts with shallow GPAs which are relatively planar but have different lumen characteristics, one case exhibiting a local restriction at the perianastomotic graft and proximal host whilst the other case has a relatively uniform cross section. The third case is nonplanar and characterized by a wide GPA resulting from the graft being constructed superficially from an in situ vein. In all three models the same peripheral resistance was imposed at the computational outflows of the distal and proximal host vessels and this condition, combined with the effect of the anastomotic geometry, has been observed to reasonably reproduce the in vivo flow split. By analyzing the flow fields we demonstrate how the local and global geometric characteristics influences the distribution of wall shear stress and the steady transport of fluid particles. Specifically, in vessels that have a global geometric characteristic we observe that the wall shear stress depends on large scale geometrical factors, e.g., the curvature and planarity of blood vessels. In contrast, the wall shear stress distribution and local mixing is significantly influenced by morphology and location of restrictions, particular when there is a shallow GPA. A combination of local and global effects are also possible as demonstrated in our third study of an anastomosis with a larger GPA. These relatively simple observations highlight the need to distinguish between local and global geometric influences for a given reconstruction. We further present the geometrical evolution of the anastomoses over a series of follow-up studies and observe how the lumen progresses towards the faster bulk flow of the velocity in the original geometry. This mechanism is consistent with the luminal changes in recirculation regions that experience low wall shear stress. In the shallow GPA anastomoses the proximal part of the native host vessel occludes or stenoses earlier than in the case with wide GPA. A potential contribution to this behavior is suggested by the stronger mixing that characterizes anastomoses with large GPA.     

Simulation of flow through a Miller cuff bypass graft

Unnatural temporal and spatial distributions of wall shear stress in the anastomosis of distal bypass grafts have been identified as possible factors in the development of anastomotic intimal hyperplasia in these grafts. Distal bypass graft anastomoses with an autologus vein cuff (a Miller cuff) interposed between the graft and artery have been shown to alleviate the effects of intimal hyperplasia. In this study, pulsatile flow through models of a standard end-to-side anastomosis and a Miller cuff anastomosis are computed and the resulting wall shear stress and pressure distributions analysed. The results are inconclusive, and could be taken to suggest that the unnatural distributions of shear stress that do occur along the anastomosis floor may not be particularly important in the development of intimal hyperplasia. However, it seems more likely that the positive effects of the biological and material properties of the vein cuff, which are not considered in this study, somehow outweigh the negative effects of the shear stress distributions predicted to occur on the floor of the Miller-cuff graft.