Self-assembled micelles of biodegradable triblock copolymers based on poly(ethyl ethylene phosphate) and poly(-caprolactone) as drug carriers

A series of novel amphiphilic triblock copolymers of poly(ethyl ethylene phosphate) and poly(-caprolactone) (PEEP-PCL-PEEP) with various PEEP and PCL block lengths were synthesized and characterized. These triblock copolymers formed micelles composed of a hydrophobic core of poly(-caprolactone) (PCL) and a hydrophilic shell of poly(ethyl ethylene phosphate) (PEEP) in aqueous solution. The micelle morphology was spherical, determined by transmission electron microscopy. It was found that the size and critical micelle concentration values of the micelles depended on both hydrophobic PCL block length and PEEP hydrophilic block length. The in vitro degradation characteristics of the triblock copolymers were investigated in micellar form, showing that these copolymers were completely biodegradable under enzymatic catalysis of Pseudomonas lipase and phosphodiesterase I. These triblock copolymers were used for paclitaxel (PTX) encapsulation to demonstrate the potential in drug delivery. PTX was successfully loaded into the micelles, and the in vitro release profile was found to be correlative to the polymer composition. These biodegradable triblock copolymer micelles are potential as novel carriers for hydrophobic drug delivery.     

Core-cross-linked polymeric micelles as paclitaxel carriers

Cross-linkable di- and triblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxyl poly(ethylene glycol) (MPEG) were synthesized. These amphiphilic copolymers self-assembled into nanoscale micelles capable of encapsulating hydrophobic paclitaxel in their hydrophobic cores in aqueous solutions. To further enhance their thermodynamic stability, the micelles were cross-linked by radical polymerization of the double bonds introduced into the PCL blocks. Reaction conditions were found to significantly affect both the cross-linking efficiency and the micelle size. The encapsulation of paclitaxel into the micelles was confirmed by the proton nuclear magnetic resonance (1H NMR) spectroscopy. Encouragingly, paclitaxel-loading efficiency of micelles was enhanced significantly upon micelle core-cross-linking. Both the micelle size and the drug loading efficiency increased markedly with increasing the PCL block lengths, no matter if the micelles were core-cross-linked or not. However, paclitaxel-loading did not obviously affect the micelle size or size distribution. The cross-linked micelles exhibited a significantly enhanced thermodynamic stability against dilution with aqueous solvents. The efficient cellular uptake of paclitaxel loaded in the nanomicelles was demonstrated by confocal laser scanning microscopy (CLSM) imaging. This new biodegradable nanoscale carrier system merits further investigations for parenteral drug delivery.     

High-level conjugation of chelating agents onto immunoglobulins: use of an intermediary poly(L-lysine)-diethylenetriaminepentaacetic acid carrier

Diethylenetriaminepentaacetic acid (DTPA), a strong chelating agent, was covalently linked to murine monoclonal anti-HLA IgG1 antibody (H-1) with the use of poly(L-lysine) (Mr 14,000) as a multivalent, intermediary carrier, via thiol-disulfide exchange reaction. The conjugates contained up to 42.5 mol DTPA per mol antibody, and retained over 90% of their antibody activity in vitro. The conjugates incorporated gadolinium (Gd) through an exchange reaction with Gd-EDTA, used to prevent colloid formation and nonspecific binding of the free metal. The IgG-poly(L-lysine)-DTPA-Gd had a greater effect per mol on proton relaxation rates than DTPA-Gd itself. Use of poly(L-lysine) as an intermediary carrier for attachment of chelating agents to IgG thus offers great potential for achieving high-specific-activity conjugates, particularly for use as biologically specific contrast agents in nuclear magnetic resonance imaging.     

Self-assembly of polypeptide-containing ABC-type triblock copolymers in aqueous solution and its pH dependence

Self-assembling of novel biodegradable ABC-type triblock copolymer poly(ethylene glycol)-poly(L-lactide)-poly(L-glutamic acid) (PEG-PLLA-PLGA) is studied. In aqueous media, it self-assembles into a spherical micelle with the hydrophobic PLLA segment in the core and the two hydrophilic segments PEG and PLGA in the shell. With the lengths of PEG and PLLA blocks fixed, the diameter of the micelles depends on the length of the PLGA block and on the volume ratio of H(2)O/dimethylformamide (DMF) in the media. When the PLGA block is long enough, morphology of the self-assembly is pH-dependent. It assembles into the spherical micelle in aqueous media at pH 4.5 and into the connected rod at or below pH 3.2. The critical micelle concentration (cmc) of the copolymer changes accordingly with decreasing solution pH. Both aggregation states can convert to each other at the proper pH value. This reversibility is ascribed to the dissociation and neutralization of the COOH groups in the LGA residues. When the PLGA block is short compared to the PEG or PLLA block, it assembles only into the spherical micelle at various pH values.     

Biodegradable amphiphilic triblock copolymer bearing pendant glucose residues: preparation and specific interaction with Concanavalin A molecules

A novel biodegradable amphiphilic block copolymer PLGG-PEG-PLGG bearing pendant glucose residues is successfully prepared by the coupling reaction of 3-(2-aminoethylthio)propyl-alpha-D-glucopyranoside with the pendant carboxyl groups of PLGG-PEG-PLGG in the presence of N,N'-carbonyldiimidazole. The polymer PLGG-PEG-PLGG, i.e., poly{(lactic acid)-co-[(glycolic acid)-alt-(L-glutamic acid)]}-block-poly(ethylene glycol)-block- poly{(lactic acid)-co-[(glycolic acid)-alt-(L-glutamic acid)]}, is prepared by ring-opening copolymerization of L-lactide (LLA) with (3s)-benzoxylcarbonylethylmorpholine-2,5-dione (BEMD) in the presence of dihydroxyl PEG with molecular weight of 2000 as macroinitiator and Sn(Oct)2 as catalyst, and then by catalytic hydrogenation. The glucose-grafted copolymer shows a lower degree of cytotoxicity to ECV-304 cells and improved specific recognition and binding with Concanavalin A (Con A). Therefore, this kind of glucose-grafted copolymer may find biomedical applications.     

Synthesis and characterization of poly(L-glutamic acid) gadolinium chelate: a new biodegradable MRI contrast agent

Most currently evaluated macromolecular contrast agents for magnetic resonance imaging (MRI) are not biodegradable. The goal of this study is to synthesize and characterize poly(l-glutamic acid) (PG) gadolinium chelates as biodegradable blood-pool MRI contrast agents. Two PG chelates of gadolinium diethylenetriaminepentaacetic acid (Gd-DTPA) were synthesized through the use of difunctional and monofunctional DTPA precursors. The conjugates were characterized with regard to molecular weight and molecular weight distribution, gadolinium content, relaxivity, and degradability. Distributions of the polymeric MRI contrast agents in various organs were determined by intravenous injection of (111)In-labeled polymers into mice bearing murine breast tumors. MRI scans were performed at 1.5 T in mice after bolus injection of the polymeric chelates. PG-Hex-DTPA-Gd, obtained from aminohexyl-substituted PG and DTPA-dianhydride, was partially cross-linked and was undegradable in the presence of cathepsin B. On the other hand, PG-Bz-DTPA-Gd synthesized directly from PG and monofunctional p-aminobenzyl-DTPA(acetic acid-tert-butyl ester) was a linear polymer and was degradable. The relaxivities of the polymers at 1.5 T were 3-8 times as great as that of Gd-DTPA. Both polymers had high blood concentrations and were primarily accumulated in the kidney. However, PG-Bz-DTPA-Gd was gradually cleared from the body and had significantly less retention in the blood, the spleen, and the kidney. MRI with PG-Bz-DTPA-Gd in mice showed enhanced vascular contrast at up to 2 h after the contrast agent injection. The ability of PG-Bz-DTPA-Gd to be degraded and cleared from the body makes it a favorable macromolecular MRI contrast agent.     

Facile preparation of well-defined AB2 Y-shaped miktoarm star polypeptide copolymer via the combination of ring-opening polymerization and click chemistry

Well-defined AB2 Y-shaped miktoarm star polypeptide copolymer, PZLL-b-(PBLG)2, was synthesized via a combination of ring-opening polymerization (ROP) of alpha-amino acid N-carboxyanhydride (NCA) and click chemistry, where PZLL is poly(epsilon-benzyloxycarbonyl-L-lysine) and PBLG is poly(gamma-benzyl-L-glutamate). First, two types of primary-amine-containing initiators, N-aminoethyl 3,5-bis(propargyloxyl)-benzamide and 3-azidopropylamine, were synthesized and employed for the ROP of NCA, leading to the formation of dialkynyl-terminated PZLL and azide-terminated PBLG, dialkynyl-PZLL and PBLG-N3, respectively. The subsequent copper(I)-catalyzed cycloaddition reaction between dialkynyl-PZLL and slightly excess PBLG-N3 led to facile preparation of PZLL-b-(PBLG)2 Y-shaped miktoarm star polypeptide copolymer. The excess PBLG-N3 was scavenged off by reacting with alkynyl-functionalized Wang resin. The obtained Y-shaped miktoarm star polypeptide copolymer was characterized by gel permeation chromatograph (GPC), Fourier transform-infrared spectroscopy (FT-IR), and (1)H NMR. Moreover, after the hydrolysis of protecting benzyl and benzyloxycarbonyl groups of PZLL-b-(PBLG)2, water-soluble pH-responsive Y-shaped miktoarm star polypeptide copolymer, PLL-b-(PLGA)2, was obtained, where PLL is poly(L-lysine) and PLGA is poly(L-glutamic acid). It can self-assemble into PLGA-core micelles at acidic pH and PLL-core micelles at alkaline pH, accompanied with the coil-to-helix transition of PLGA and PLL sequences, respectively. The spontaneous pH-responsive supramolecular assembly of PLL-b-(PLGA)2 miktoarm star polypeptide copolymer has been investigated via a combination of (1)H NMR, laser light scattering (LLS), transmission electron microscopy (TEM), and circular dichroism (CD) spectroscopy.     

Synthesis and micellization of amphiphilic brush-coil block copolymer based on poly(epsilon-caprolactone) and PEGylated polyphosphoester

A novel biodegradable amphiphilic brush-coil block copolymer consisting of poly(epsilon-caprolactone) and PEGylated polyphosphoester was synthesized by ring opening polymerization. The composition and structure of the copolymer were characterized by 1H NMR, 13C NMR, and FT-IR, and the molecular weight and molecular weight distribution were analyzed by gel permeation chromatograph (GPC) measurements to confirm the diblock structure. These amphiphilic copolymers formed micellar structures in water, and the critical micelle concentrations (CMCs) were around 10(-3) mg/mL, which was determined using pyrene as a fluorescence probe. Transmission electron microscopy (TEM) images showed that the micelles took an approximately spherical shape with core-shell structure, which was further demonstrated by laser light scattering (LLS) technique. The degradation behavior of the polymeric micelle was also investigated in the presence of Pseudomonas lipase and characterized by GPC measurement. Such polymer micelles from brush-coil block copolymers are expected to have wide utility in the field of drug delivery.     

Synthesis, characterization, and bioavailability of mannosylated shell cross-linked nanoparticles

Saccharide-functionalized shell cross-linked (SCK) polymer micelles designed as polyvalent nanoscaffolds for selective interactions with receptors on Gram negative bacteria were constructed from mixed micelles composed of poly(acrylic acid-b-methyl acrylate) and mannosylated poly(acrylic acid-b-methyl acrylate). The mannose unit was conjugated to the hydrophilic chain terminus of the amphiphilic diblock copolymer precursor, from which the SCK nanoparticles were derived, by the growth of the diblock copolymer from a mannoside functionalized atom transfer radical polymerization (ATRP) initiator. Mixed micelle formation between the amphiphilic diblock copolymer and mannosylated amphiphilic diblock copolymer was followed by condensation-based cross-linking between the acrylic acid residues present in the periphery of the polymer micelles to afford SCK nanoparticles. SCKs presenting variable numbers of mannose functionalities were prepared from mixed micelles of controlled stoichiometric ratios of mannosylated and nonmannosylated diblock copolymers. The polymer micelles and SCKs were characterized by dynamic light scattering (DLS), electrophoretic light scattering, atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). Surface availability and bioactivity of the mannose units were evaluated by interactions of the nanostructures with the model lectin Concanavalin A via DLS studies, with red blood cells (rabbit) via agglutination inhibition assays and with bacterial cells (E. coli) via TEM imaging.     

Diethylenetriaminepentaacetic acid-gadolinium (DTPA-Gd)-conjugated polysuccinimide derivatives as magnetic resonance imaging contrast agents

Biocompatible polysuccinimide (PSI) derivatives conjugated with diethylenetriaminepentaacetic acid gadolinium (DTPA-Gd) were prepared as magnetic resonance imaging (MRI) contrast agents. In this study, we synthesized PSI derivatives incorporating methoxy-poly(ethylene glycol) (mPEG) as hydrophilic ligand, hexadecylamine as hydrophobic ligand, and DTPA-Gd as contrast agent. PSI was synthesized by the polycondensation polymerization of aspartic acid. All the synthesized materials were characterized by proton nuclear magnetic resonance (1H NMR). Critical micellization concentrations were determined using fluorescent probes (pyrene). Micelle size and shape were measured by electro-photometer light scattering (ELS) and atomic force microscopy (AFM). The formed micelle size ranged from 100 to 300 nm. The T1-weighted MR images of the phantom prepared with PSI-mPEG-C16-(DTPA-Gd) were obtained in a 3.0 T clinical MR imager, and the conjugates showed a great potential as MRI contrast agents.     

Design of polypeptide-functionalized polystyrene microspheres

In this contribution, the principle of spontaneous surface segregation has been applied for the preparation of polypeptide-functionalized polystyrene microspheres. For that purpose, an amphiphilic diblock copolymer was introduced in the mixture styrene/divinylbenzene and polymerized using AIBN as initiator. During the polymerization, cross-linked particles were obtained in which the diblock copolymer was encapsulated. The amphiphilic diblock copolymers used throughout this study contain a hydrophilic polypeptide segment, either poly(L-lysine) or poly(L-glutamic acid) and a hydrophobic polystyrene block. After 4 h of polymerization, rather monodisperse particles with sizes of approximately 3-4 microm were obtained. Upon annealing in hot water, the hydrophilic polypeptides migrate to the interface, hence, either positively charged or neutral particles were obtained when poly(L-lysine) is revealed at the surface and exposed to acidic or basic pH, respectively. On the opposite, negatively charged particles were achieved in basic pH water by using poly(L-glutamic acid) as additive. The surface chemical composition was modified by changing the environment of the particles. Thus, exposure in toluene provoked a surface rearrangement, and due to its affinity, the polystyrene block reorients toward the interface.     

Thiol-functionalized polymeric micelles: from molecular recognition to improved mucoadhesion

Surface-modified colloids which can selectively interact with biological species or surfaces show promise as drug delivery systems. However, the preparation of such targeted devices remains challenging, especially when considering polyion complex micelles for which side reactions with the ionic core components (typically carboxylic acid or amino groups) can occur. To solve this issue, an innovative synthetic strategy is proposed and used to prepare an asymmetric poly(ethylene glycol)-block-poly(2-(N,N-dimethylamino)ethyl methacrylate) copolymer presenting a thiol group at the end of the poly(ethylene glycol) chain. Thiol groups are highly appealing given that they react almost exclusively and quantitatively with maleimides under physiological conditions, thereby facilitating the chemical functionalization of the copolymer. The simplicity of the derivatization procedure is illustrated by preparing model biotin-capped copolymers. The biotinylated copolymers are shown to self-assemble with an oligonucleotide in aqueous media to form polyion complex micelles with biotin groups at their outer surface. These micelles are capable of molecular recognition toward streptavidin. Alternatively, thiol-decorated (nonderivatized) micelles are prepared and show improved mucoadhesion through the formation of disulfide bonds with mucin. Finally, intermicellar disulfide bonds are generated under oxidative conditions to promote the formation of stimuli-responsive micellar networks.     

Selective enzymatic degradation of self-assembled particles from amphiphilic block copolymers obtained by the combination of N-carboxyanhydride and nitroxide-mediated polymerization

Combining controlled radical polymerizations and a controlled polypeptide synthetic technique, such as N-carboxyanhydride (NCA) ring-opening polymerization, enables the generation of well-defined block copolymers to be easily accessible. Here we combine NCA polymerization with the nitroxide-mediated radical polymerization of poly(n-butyl acrylate) (PBA) and polystyrene (PS), using a TIPNO and SG1-based bifunctional initiator to create a hybrid block copolymer. The polypeptide block consists of (block) copolymers of poly(L-glutamic acid) embedded with various quantities of L-alanine. The formed superstructures (vesicles and micelles) of the block copolymers possessed varying degrees of enzyme responsiveness when exposed to elastase and thermolysin, resulting in controlled enzymatic degradation dictated by the polypeptide composition. The PBA containing block copolymers possessing 50% L-alanine in the polypeptide block showed a high degradation response compared to polymers containing lower L-alanine quantities. The particles stabilized by copolypeptides with L-alanine near the hydrophobic block showed full degradation within 4 days. Particles containing polystyrene blocks revealed no appreciable degradation under the same conditions, highlighting the specificity of the system and the importance of synthetic polymer selection. However, when the degradation temperature was increased to 70 °C, degradation could be achieved due to the higher block copolymer exchange between the particle and the solution. A number of novel biohybrid structures are disclosed that show promise as enzyme-responsive materials with potential use as payload release vehicles, following their controlled degradation by specific, target, enzymes.     

Fabrication of multiresponsive shell cross-linked micelles possessing pH-controllable core swellability and thermo-tunable corona permeability

A double hydrophilic ABC triblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(N-isopropylacrylamide) (PDEA-b-PDMA-b-PNIPAM), containing the well-known pH-responsive PDEA block and thermoresponsive PNIPAM block, was synthesized by atom transfer radical polymerization via sequential monomer addition using ethyl 2-chloropropionate as the initiator. The obtained triblock copolymer exhibits interesting "schizophrenic" micellization behavior in aqueous solution, and supramolecularly self-assembles into three-layer "onion-like" PNIPAM-core micelles at acidic pH's and elevated temperatures and PDEA-core micelles with "inverted" structures at alkaline pH's and room temperature. In both cases, dynamic laser light scattering (LLS) and optical transmittance reveal the presence of near-monodisperse micelles, and the micelle formation/inversion process is fully reversible. Novel shell cross-linked (SCL) micelles with pH-responsive PDEA cores and thermoresponsive PNIPAM coronas were then facilely fabricated from the PDEA-b-PDMA-b-PNIPAM triblock copolymer by cross-linking the PDMA inner shells with 1,2-bis(2-iodoethoxy)ethane. The reversible pH-dependent swelling/shrinking of PDEA cores and thermosensitive collapse/aggregation of PNIPAM coronas of the obtained SCL micelles were investigated in detail by dynamic LLS, optical transmittance, and transmission electron microscopy. As the structurally stable SCL micelles possess pH-controllable core swellability and thermo-tunable corona permeability, the release profile of a model hydrophobic drug, dipyridamole, initially loaded within the hydrophobic PDEA core, can be dually controlled by both the solution pH and the temperature. This represents the first report of SCL micelles with multiresponsive cores and coronas, which may find practical applications in fields such as drug delivery and smart release.     

Conjugation of a monoclonal antibody with a DTPA modified random copolymer of hydroxyethyl methylacrylate and methyl methacrylate

A new approach for covalent coupling diethylenetriaminepentaacetic acid (DTPA) molecules to a partially reduced monoclonal antibody utilizes a malemide modified copolymer of hydroxyethyl methylacrylate and methyl methacrylate (DTPA copolymer) prepared by the group transfer polymerization (GTP) method. An average of 6 DTPA molecules were incorporated per mol maleimeide DTPA copolymer and 1.5 mol maleimide DTPA copolymer per mol antibody. Maleimide DTPA copolymer modified antibody was intramolecularly cross-linked, reduced immunoactivity and had a high in vivo liver uptake.     

Synthesis and characterization of cationic micelles self-assembled from a biodegradable copolymer for gene delivery

We have recently reported biodegradable cationic micelles self-assembled from an amphiphilic copolymer, poly{(N-methyldietheneamine sebacate)-co-[(cholesteryl oxocarbonylamido ethyl)methyl bis(ethylene)ammonium bromide]sebacate} (P(MDS-co-CES)), which were utilized to deliver a drug and nucleic acid simultaneously, and a synergistic effect was achieved. In this paper, synthesis and characterization of the polymer is presented in details, focusing on micelle formation and DNA binding under various conditions, cytotoxicity, in-vitro degradation, and gene transfection in various cell lines. The polymer was degradable and formed micelles at very low concentrations even in an environment with high salt concentration. These micelles fabricated at pH 4.6 had an average size of less than 82 nm and zeta potential of up to 84 +/- 5 mV, displaying strong DNA binding ability. They induced high gene expression efficiency in various cell lines, which was significantly greater than poly(ethylenimine) (PEI) especially in 4T1 mouse and MDA-MB-231 human breast cancer cell lines, but they were less cytotoxic. These cationic micelles may provide a promising nonviral vector for gene delivery.     

pH-Sensitive micelles self-assembled from amphiphilic copolymer brush for delivery of poorly water-soluble drugs

A novel pH-sensitive amphiphilic copolymer brush poly(methyl methacrylate-co-methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) [P(MMA-co-MAA)-b-PPEGMA] was defined and synthesized by atom transfer radical polymerization (ATRP) technique. The molecular structures and characteristics of this copolymer and its precursors were confirmed by (1)H NMR, FT-IR, and GPC. The CMC of P(MMA-co-MAA)-b-PPEGMA in aqueous medium was determined to be 1-4 mg/L. This copolymer could self-assemble into micelles in aqueous solution with an average size of 120-250 nm determined by DLS. The morphologies of the micelles were found to be spherical by SEM and TEM. Ibuprofen (IBU), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. Drug entrapment efficiency reached to 90%. The in vitro release behavior of IBU from these micelles was pH-dependent. The cumulative release percent of IBU was less than 20% of the initial drug content in simulated gastric fluid (SGF, pH 1.2) over 12 h, but 90% was released in simulated intestinal fluid (SIF, pH 7.4) within 6 h. The release profiles showed that the P(MMA-co-MAA)-b-PPEGMA micelles could inhibit the premature burst drug release under the intestinal conditions. All the results indicate that the P(MMA-co-MAA)-b-PPEGMA micelle may be a potential oral drug delivery carrier for poorly water-soluble drugs.     

Synthesis of poly(epsilon-caprolactone)-b-poly(gamma-benzyl-L-glutamic acid) block copolymer using amino organic calcium catalyst

A biodegradable two block copolymer, poly(epsilon-caprolactone)-b- poly(gamma-benzyl-L-glutamic acid) (PCL-PBLG) was synthesized successfully by ring-opening polymerization of N-carboxyanhydride of gamma-benzyl-L-glutamate (BLG-NCA) with aminophenyl-terminated PCL as a macroinitiator. The aminophenethoxyl-terminated PCL was prepared via hydrogenation of a 4-nitrophenethoxyl-terminated PCL, which was novelly obtained from the polymerization of epsilon-caprolactone (CL) initiated by amino calcium 4-nitrobenzoxide. The structures of the block copolymer and its precursors from the initial step of PCL were confirmed and investigated by 1H NMR, FT-IR, GPC, and FT-ICRMS analyses and DSC measurements.     

Bioreducible micelles self-assembled from amphiphilic hyperbranched multiarm copolymer for glutathione-mediated intracellular drug delivery

A new type of biodegradable micelles for glutathione-mediated intracellular drug delivery was developed on the basis of an amphiphilic hyperbranched multiarm copolymer (H40-star-PLA-SS-PEP) with disulfide linkages between the hydrophobic polyester core and hydrophilic polyphosphate arms. The resulting copolymers were characterized by nuclear magnetic resonance (NMR), Fourier transformed infrared (FTIR), gel permeation chromatography (GPC), and differential scanning calorimeter (DSC) techniques. Benefiting from amphiphilic structure, H40-star-PLA-SS-PEP was able to self-assemble into micelles in aqueous solution with an average diameter of 70 nm. Moreover, the hydrophilic polyphosphate shell of these micelles could be detached under reduction-stimulus by in vitro evaluation, which resulted in a rapid drug release due to the destruction of micelle structure. The glutathione-mediated intracellular drug delivery was investigated against a Hela human cervical carcinoma cell line. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements demonstrated that H40-star-PLA-SS-PEP micelles exhibited a faster drug release in glutathione monoester (GSH-OEt) pretreated Hela cells than that in the nonpretreated cells. Cytotoxicity assay of the doxorubicin-loaded (DOX-loaded) micelles indicated the higher cellular proliferation inhibition against 10 mM of GSH-OEt pretreated Hela cells than that of the nonpretreated ones. As expected, the DOX-loaded micelles showed lower inhibition against 0.1 mM of buthionine sulfoximine (BSO) pretreated Hela cells. These reduction-responsive and biodegradable micelles show a potential to improve the antitumor efficacy of hydrophobic chemotherapeutic drugs.