Chitosan graft copolymer nanoparticles for oral protein drug delivery: preparation and characterization

Several novel functionalized graft copolymer nanoparticles consisting of chitosan (CS) and the monomer methyl methacrylate (MMA), N-dimethylaminoethyl methacrylate hydrochloride (DMAEMC), and N-trimethylaminoethyl methacrylate chloride (TMAEMC), which show a higher solubility than chitosan in a broader pH range, have been prepared by free radical polymerization. The nanoparticles were characterized in terms of particle size, zeta potential, TEM, and FT-IR. These nanoparticles were 150-280 nm in size and carried obvious positive surface charges. Protein-loaded nanoparticles were prepared, and their maximal encapsulation efficiency was up to 100%. In vitro release showed that these nanoparticles provided an initial burst release followed by a slowly sustained release for more than 24 h. These graft copolymer nanoparticles enhanced the absorption and improved the bioavailability of insulin via the gastrointestinal (GI) tract of normal male Sprague-Dawley (SD) strain rats to a greater extent than that of the phosphate buffer solution (PBS) of insulin.     

Synthesis and characterization of a novel MPEG–chitosan diblock copolymer and self-assembly of nanoparticles

In this paper, a simple and novel method based on free-radical polymerization initiated by potassium persulfate (KPS) was developed to synthesize the MPEG–chitosan diblock copolymer (MPEG–CS). The obtained MPEG–CS diblock copolymer was characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The MPEG–CS copolymer could self-assemble into nanoparticles in aqueous solution. A typical TEM photography indicated that the well-spherical nanoparticles with diameter at about 200 nm were obtained. In vitro cell culture assay indicated that MPEG–CS nanoparticles are non-toxic and cell-compatible as the polymer concentration was smaller than 0.6 mg/ml. In conclusion, the obtained MPEG–CS nanoparticles might have great potential application in drug-delivery system.     

Nanoscale self-assembly of multiblock copolymer chains into rods

Rodlike fibrous structures are increasingly found with biomacromolecules, e.g. silks, elastin, and collagen. Here we propose a multiblock copolymer model that can lead to these larger-scale structures. One component consists of highly regular blocks, whereas the blocks of another, incompatible component exhibit a wide range of lengths. Rods readily form when these lengths have a bimodal distribution and a well-defined periodicity along the chain. Orientation in a flowing liquid assists association of rods, as is likely in the spinning of silks, which have comparable repetitive sequences. The model suggests that rodlike structures should be available in similarly designed synthetic polymers. This route would be distinct from existing routes that employ rigid monomers, e.g. aramids.     

Folate-conjugated thermoresponsive block copolymers: highly efficient conjugation and solution self-assembly

A combination of controlled radical polymerization and azide-alkyne click chemistry was employed to prepare temperature-responsive block copolymer micelles conjugated with biological ligands with potential for active targeting of cancer tissues. Block copolymers of N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide (DMA) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with an azido chain transfer agent (CTA). Pseudo-first-order kinetics and linear molecular weight dependence on conversion were observed for the RAFT polymerizations. CuI-catalyzed coupling with propargyl folate resulted in folic acid residues being efficiently conjugated to the alpha-azido chain ends of the homo and block copolymers. Temperature-induced self-assembly resulted in aggregates capable of controlled release of a model hydrophobic drug. CuI-catalyzed azide-alkyne cycloaddition has proven superior to conventional methods for conjugation of biological ligands to macromolecules, and the general strategy presented herein can potentially be extended to the preparation of folate-functionalized assemblies with other stimuli susceptibility (e.g., pH) for therapeutic and imaging applications.     

Hierarchical ionic self-assembly of rod-comb block copolypeptide-surfactant complexes

Novel hierarchical nanostructures based on ionically self-assembled complexes of diblock copolypeptides and surfactants are presented. Rod-coil diblock copolypeptide poly(gamma-benzyl-L-glutamate)-block-poly(L-lysine), PBLG-b-PLL (Mn = 25,000 and 8000 for PBLG and PLL, respectively, polydispersity index 1.08), was complexed with anionic surfactants dodecanesulfonic acid (DSA) or dodecyl benzenesulfonic acid (DBSA), denoted as PBLG-b-PLL(DSA)1.0 and PBLG-b-PLL(DBSA)1.0, respectively. The complexation leading to supramolecular rod-comb architectures was studied by transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), Fourier transform infrared spectroscopy (FTIR), and polarized optical microscopy (POM). PBLG-b-PLL, PBLG-b-PLL(DBSA)1.0, and PBLG-b-PLL(DSA)1.0 self-assemble with alternating PBLG lamellae and PLL-containing lamellae with a periodicity of 27-33 nm. Within the PBLG lamellae, the rod-like PBLG helices pack with a periodicity of ca. 1.3 nm. The internal structure of the PLL-containing lamellae depends on the complexation. For pure PBLG-b-PLL, the PLL chains adopt a random coil conformation and the PLL domains are disordered. For PBLG-b-PLL(DSA)1.0, lamellar self-assembly of periodicity of 3.7 nm within the PLL(DSA)1.0 domains is observed due to crystalline packing of the linear n-dodecyl tails. For PBLG-b-PLL(DBSA)1.0 with branched dodecyl tails, a distinct SAXS reflection is observed, suggesting self-assembly within the PLL(DBSA)1.0 domains with a periodicity of 2.9 nm. However, due to the absence of higher order reflections, the internal structure cannot be conclusively assigned. The efficient plasticization which leads to fluid-like liquid crystallinity in PBLG-b-PLL(DBSA)1.0 and an alpha-helical conformation according to FTIR allows us to suggest that the PLL(DBSA)1.0 domains have a hexagonal internal structure. The interplay of self-assembly at different length scales combined with rod-like liquid crystallinity can open new routes to design functional materials.     

Effect of tyrosine-derived triblock copolymer compositions on nanosphere self-assembly and drug delivery

We have obtained structure-activity relations for nanosphere drug delivery as a function of the chemical properties of a tunable family of self-assembling triblock copolymers. These block copolymers are synthesized with hydrophobic oligomers of a desaminotyrosyl tyrosine ester and diacid and hydrophilic poly(ethylene glycol). We have calculated the thermodynamic interaction parameters for the copolymers with anti-tumor drugs to provide an understanding of the drug binding by the nanospheres. We find that there is an optimum ester chain length, C8, for nanospheres in terms of their drug loading capacities. The nanospheres release the drugs under dialysis conditions, with release rates strongly influenced by solution pH. The nanospheres, which are themselves non-cytotoxic, deliver the hydrophobic drugs very effectively to tumor cells as measured by cell killing activity in vitro and thus offer the potential for effective parentarel in vivo delivery of many hydrophobic therapeutic agents.     

Low-pH-sensitive PEG-stabilized plasmid-lipid nanoparticles: preparation and characterization

The acid-labile poly(ethyleneglycol)-diorthoester-distearoylglycerol lipid (POD), was used with a cationic lipid-phosphatidylethanolamine mixture to prepare stabilized plasmid-lipid nanoparticles (POD SPLP) that could mediate gene transfer in vitro by a pH triggered escape from the endosome. Nanoparticles of 60 nm diameter were prepared at pH 8.5 using a detergent dialysis method. The DNA encapsulation efficiency in the nanoparticles was optimal between 10 and 13 mol % ratio of cationic lipid and at a POD content of 20 mol %. The apparent zeta potential of the nanoparticles at 1 mM salt and pH 7.5 was positive, indicating cationic lipid on the external surface. However, the external layer of the nanoparticles was depleted in the cationic component compared to the starting mole ratio. Low pH sensitivity of the POD SPLP was characterized by a lag phase followed by a rapid collapse; at pH 5.3 the nanoparticles collapsed in 100 min. Nanoparticles prepared from a pH-insensitive PEG-lipid, PEG-distearoylglycerol had similar physicochemical characteristics as the POD SPLP but did not collapse at low pH. The POD SPLP had up to 3 orders of magnitude greater gene transfer activity than did the pH-insensitive nanoparticles. Both the pH-sensitive and pH-insensitive nanoparticles were internalized to a qualitatively similar extent in a punctate pattern into cultured cells within 2 h of incubation with the cells; thus, increased gene transfer of the POD SPLP was due to a more rapid escape from the endosome rather than to greater cell association of these nanoparticles. These results suggest that the pH-sensitive stabilized plasmid-lipid nanoparticles may be a useful component of a synthetic vector for parenterally administered gene therapy.     

Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

Biofunctionalized self-assembly of peptide amphiphile induces the differentiation of bone marrow mesenchymal stem cells into neural cells

Molecular and Cellular Biochemistry - Bone marrow mesenchymal stem cells (BMSCs) are multipotential differentiation cells which can differentiate into different cell types such as osteoblasts,...     

Gold DNA-conjugates: ion specific self-assembly of gold nanoparticles via the dG-quartet

The Oxytricha telomere DNA hairpin 5'-d(G4T4G4) immobilized on 13 nm gold nanoparticles forms a supramolecular assembly via dGC-quartets, as determined by the color change and by SEM. The aggregation is ion-dependent and selective for sodium ions. K+ is less efficient while Li+ and Cs+ do not drive the aggregation. This work is the first effort exploring the use of secondary structures of DNA (quadruplexes) for producing self-assemblies of gold nanoparticles.     

Non-toxic nanoparticles from phytochemicals: preparation and biomedical application

Nanoparticles (NPs) have various applications in biomedicine and drug delivery carriers and also are widely used in cosmetics. However, the preparation of biocompatible and non-toxic nanomaterials is a very important issue as most of the starting materials are synthesized using toxic chemical reagents. This review introduces the preparation of biocompatible NPs in a range of their concentrations using phytochemicals for biomedicine and biotechnology. Phytochemicals are natural products that are extracted from plants, vegetables, and fruits. Phytochemicals serve as reducing agents and stabilizers during NP synthesis to convert metal ions to metal NPs in water. Possible applications of such nanomaterials in biomedical sciences are also described in this review.     

Novel injectable pH and temperature sensitive block copolymer hydrogel

A novel pH and temperature sensitive block copolymer was prepared by adding pH sensitive moiety to temperature sensitive block copolymer. This block copolymer solution showed a reversible sol-gel transition by a small pH change in the range of pH 7.4-8.0 and also by the temperature change in the region of body temperature. The very precise molecular weight control of block copolymer and the prudential tuning of hydrophilic-hydrophobic balance were needed to control the phase diagram. This block copolymer solution forms a gel at 37 degrees C, pH 7.4 (human body). When the block copolymer solution is at room temperature and pH 8.0 as a sol state, both the temperature and pH change are needed for the gelation. This material can be employed as injectable carriers for hydrophobic drugs and proteins, etc. Gelation inside the needle can be prevented by an increase in the temperature during injection, because it does not change into the gel form with only increasing temperature. This material can be used for even a long guide catheter into the body. The block copolymer hydrogel which shows the sol-gel transition by the small pH change from pH 8.0 to pH 7.4 has merits in the delivery system for protein and cells which show cytotoxicity in acidic (below pH 6.5) or basic (above pH 8.5) conditions. This block copolymer system could be used as a template technology for injectable delivery systems.     

PEG-SS-PPS: reduction-sensitive disulfide block copolymer vesicles for intracellular drug delivery

Under appropriate conditions, block copolymeric macroamphiphiles will self-assemble in water to form vesicles, referred to as polymersomes. We report here polymersomes that can protect biomolecules in the extracellular environment, are taken up by endocytosis, and then suddenly burst within the early endosome, releasing their contents prior to exposure to the harsh conditions encountered after lysosomal fusion. Specifically, block copolymers of the hydrophile poly(ethylene glycol) (PEG) and the hydrophobe poly(propylene sulfide) (PPS) were synthesized with an intervening disulfide, PEG17-SS-PPS30. Polymersomes formed from this block copolymer were demonstrated to disrupt in the presence of intracellular concentrations of cysteine. In cellular experiments, uptake, disruption, and release were observed within 10 min of exposure to cells, well within the time frame of the early endosome of endolysosomal processing. This system may be useful in cytoplasmic delivery of biomolecular drugs such as peptides, proteins, oligonucleotides, and DNA.     

Redox-responsive nanoparticles from the single disulfide bond-bridged block copolymer as drug carriers for overcoming multidrug resistance in cancer cells

Multidrug resistance (MDR) is a major impediment to the success of cancer chemotherapy. The intracellular accumulation of drug and the intracellular release of drug molecules from the carrier could be the most important barriers for nanoscale carriers in overcoming MDR. We demonstrated that the redox-responsive micellar nanodrug carrier assembled from the single disulfide bond-bridged block polymer of poly(ε-caprolactone) and poly(ethyl ethylene phosphate) (PCL-SS-PEEP) achieved more drug accumulation and retention in MDR cancer cells. Such drug carrier rapidly released the incorporated doxorubicin (DOX) in response to the intracellular reductive environment. It therefore significantly enhanced the cytotoxicity of DOX to MDR cancer cells. It was demonstrated that nanoparticular drug carrier with either poly(ethylene glycol) or poly(ethyl ethylene phosphate) (PEEP) shell increased the influx but decreased the efflux of DOX by the multidrug resistant MCF-7/ADR breast cancer cells, in comparison with the direct incubation of MCF-7/ADR cells with DOX, which led to high cellular retention of DOX. Nevertheless, nanoparticles bearing PEEP shell exhibited higher affinity to the cancer cells. The shell detachment of the PCL-SS-PEEP nanoparticles caused by the reduction of intracellular glutathione significantly accelerated the drug release in MCF-7/ADR cells, demonstrated by the flow cytometric analyses, which was beneficial to the entry of DOX into the nuclei of MCF-7/ADR cells. It therefore enhanced the efficiency in overcoming MDR of cancer cells, which renders the redox-responsive nanoparticles promising in cancer therapy.     

Amphiphilic block copolymer with a molecular recognition site: induction of a novel binding characteristic of amylose by self-assembly of poly(ethylene oxide)-block-amylose in chloroform

Solution properties of amphiphilic methoxy poly(ethylene oxide)-block-amyloses (MPEO-amyloses) in chloroform were investigated by SLS and DLS. The results indicated that MPEO-amyloses dissolved in chloroform containing 2 wt % DMSO by their self-associations. The complexation of MPEO-amylose with methyl orange (MO) was significantly enhanced in the amylose domain of the associate in chloroform. The blue shift of the maximum absorption and strong induced circular dichroism with exciton coupling were observed in the MPEO-amylose MO complex in chloroform. The self-assembly of MPEO-amylose in chloroform shows a unique feature for binding with MO. MPEO-block-amylose is a novel amphiphilic polymer with amylose as a molecular recognition site.     

Linking two worlds in polymer chemistry: The influence of block uniformity and dispersity in amphiphilic block copolypeptoids on their self-assembly

The self-assembly of block copolymers has captured the interest of scientists for many decades because it can induce ordered structures and help to imitate complex structures found in nature. In contrast to proteins, nature's most functional hierarchical structures, conventional polymers are disperse in their length distribution. Here, we synthesized hydrophilic and hydrophobic polypeptoids via solid-phase synthesis (uniform) and ring-opening polymerization (disperse). Differential scanning calorimetry measurements showed that the uniform hydrophobic peptoids converge to a maximum of the melting temperature at a much lower chain length than their disperse analogs, showing that not only the chain length but also the dispersity has a considerable impact on the thermal properties of those homopolymers. These homopolymers were then coupled to yield amphiphilic block copolypeptoids. SAXS and AFM measurements confirm that the dispersity plays a major role in microphase separation of these macromolecules, and it appears that uniform hydrophobic blocks form more ordered structures.     

The preparation of fully N-epsilon-acetimidylated cytochrome c.

We have re-examined the acetimidylation and subsequent deprotection of cytochrome c by published methods in the light of recent findings on the tendency of protein acetimidylation reactions to yield side products of differing net charges. We find that the protection methods do indeed yield a mixture of products, some of which have considerably diminished biological activity. Our observations support a postulated mechanism for the generation of side products, and we have been able to identify the major factor responsible for their formation by published methods. The deprotection method appears to be free of side reactions. We describe a new procedure for acetimidylation that will produce fully N-epsilon-acetimidylated cytochrome c. This derivative, lacking detectable side products and having good biological activity, is useful for structure-function studies and as an intermediate in the semisynthesis of cytochrome c analogues.     

Cotton block method: one-step method of cell block preparation after fine needle aspiration

OBJECTIVE: To describe the cotton block method, an easy, inexpensive, 1-step method of obtaining a cell block after fine needle aspiration biopsy. STUDY DESIGN: Before connection to a 10-mL syringe, the plastic hub of a 22-23-gauge needle is filled with the 3-4-mm, woolly tip of a cotton bud. Aspiration is performed as described elsewhere. After smear preparation, the material remaining in the needle and the material retained in the cotton wool mesh are immediately fixed by aspiration ofa fixative fluid (70% alcoholic formaldehyde-acetic acid). After fixation, the cotton tip is removed and routinely processed for paraffin embedding, and the sections are stained by routine methods used in cytopathology. RESULTS: The results demonstrate that the amount and quality of material obtained in the cotton wool tip is similar to that in the traditional cell block obtained from the pellet after centrifugation of aspirated fluid. CONCLUSION: The method is easy to perform and cost effective and is a rapid way to prepare cell blocks of high quality, allowing special staining techniques and improving cytohistologic correlation.