Ultrastructure of cells cultured on polycarbonate membranes.

A method is described for preparing undisturbed cell cultures for both scanning and transmission electron microscopy. Cells were propagated on polycarbonate membranes with pores of 0.2 micrometer or less. Cultured cells together with their supports were prepared for both scanning electron microscopy and transmission electron microscopy using routine methods. For transmission electron microscopy a rapid schedule of infiltration and polymerization was used. The method described in this report yielded good results and it allowed the fine structure of cultured cells to be viewed in situ by both scanning electron microscopy and transmission electron microscopy.     

Ultrastructure of Cells Cultured on Polycarbonate Membranes

A method is described for preparing undisturbed cell cultures for both scanning and transmission electron microscopy. Cells were propagated on polycarbonate membranes with pores of 0.2 pm or less. Cultured cells together with their supports were prepared for both scanning electron microscopy and transmission electron microscopy using routine methods. For transmission electron microscopy a rapid schedule of infiltration and polymerization was used. The method described in this report yielded good results and it allowed the fine structure of cultured cells to be viewed in situ by both scanning electron microscopy and transmission electron microscopy.     

Preparation of chromosome spreads for electron (TEM,SEM, STEM), light and confocal microscopy

In the past, ultrastructural studies on chromosome morphology have been carried out using light microscopy, scanning electron microscopy and transmission electron microscopy of whole mounted or sectioned samples. Until now, however, it has not been possible to use all of these techniques on the same specimen. In this paper we describe a specimen preparation method that allows one to study the same chromosomes by transmission, scanning-transmission and scanning electron microscopy, as well as by standard light microscopy and confocal microscopy. Chromosome plates are obtained on a carbon coated glass slide. The carbon film carrying the chromosomes is then transferred to electron microscopy grids, subjected to various treatments and observed. The results show a consistent morphological correspondence between the different methods. This method could be very useful and important because it makes possible a direct comparison between the various techniques used in chromosome studies such as banding, in situ hybridization, fluorescent probe localization, ultrastructural analysis, and colloidal gold cytochemical reactionsAbbreviations CLSM confocal laser scanning microscope - EM electron microscopy - kV kilovolt(s) - LM light microscope - SEM scanning electron microscope - STEM scanning-transmission electron microscope - TEM transmission electron microscope     

Comparison of three electron microscopy techniques for the detection of human rotaviruses

Rotavirus detection by direct electron microscopy was compared with direct and indirect immune electron microscopy techniques. The latter two approaches permitted the enumeration of 25 and 103 times more rotaviruses respectively, than direct electron microscopy. Also, 70% and 90% of the virus particles were aggregated by direct and indirect immune electron microscopy techniques respectively, thus facilitating their detection.     

FluoroNanogold: an important probe for correlative microscopy

Correlative microscopy is a powerful imaging approach that refers to observing the same exact structures within a specimen by two or more imaging modalities. In biological samples, this typically means examining the same sub-cellular feature with different imaging methods. Correlative microscopy is not restricted to the domains of fluorescence microscopy and electron microscopy; however, currently, most correlative microscopy studies combine these two methods, and in this review, we will focus on the use of fluorescence and electron microscopy. Successful correlative fluorescence and electron microscopy requires probes, or reporter systems, from which useful information can be obtained with each of the imaging modalities employed. The bi-functional immunolabeling reagent, FluoroNanogold, is one such probe that provides robust signals in both fluorescence and electron microscopy. It consists of a gold cluster compound that is visualized by electron microscopy and a covalently attached fluorophore that is visualized by fluorescence microscopy. FluoroNanogold has been an extremely useful labeling reagent in correlative microscopy studies. In this report, we present an overview of research using this unique probe.     

电子显微三维重构技术发展与前沿

本文对电子显微三维重构技术(也称电镜三维重构,electron microscopy 3D reconstruction)进行简要介绍,并在此基础上对该技术当前研究的发展和前沿进行综述,包括高分辨率电镜三维重构、仪器设备性能突破、自动化数据收集和处理、高性能计算技术应用、二/三维图像处理技术的发展和创新、基于三维重构图的模型计算等方面,最后对电子显微三维重构技术的未来进行了展望。     

Combining electron microscopy and comparative protein structure modeling

Recently, advances have been made in methods and applications that integrate electron microscopy density maps and comparative modeling to produce atomic structures of macromolecular assemblies. Electron microscopy can benefit from comparative modeling through the fitting of comparative models into electron microscopy density maps. Also, comparative modeling can benefit from electron microscopy through the use of intermediate-resolution density maps in fold recognition, template selection and sequence-structure alignment.     

Transmission and scanning electron microscope preparations of the same cell culture.

A technique has been developed which allows transmission electron microscopy and scanning electron microscopy to be performed on the same cell culture sample. The technique uses the Costar 3,393 Leighton Tube containing a plastic insert, which does not stick to epoxy, for transmission electron microscopy. A cut piece of the plastic insert can be critical point dried, sputter coated and viewed under high vacuum with the scanning electron microscope.     

Transmission And Scanning Electron Microscope Preparations Of The Same Cell Culture

A technique has been developed which allows transmission electron microscopy and scanning electron microscopy to be performed on the same cell culture sample. The technique uses the Costar 3393 Leighton Tube containing a plastic insert, which does not stick to epoxy, for transmission electron microscopy. A cut piece of the plastic insert can be critical point dried, sputter coated and viewed under high vacuum with the scanning electron microscope.     

Contributions of scanning electron microscopy to corneal pathology

The increasing use of scanning electron microscopy in pathology has provided new avenues of observation and evaluation for the pathologist and researcher. The cell surface changes noted by scanning electron microscopy can contribute to an overall understanding of the pathoanatomy and pathophysiology of disease states when correlated with light microscopy and transmission electron microscopy. Our laboratory routinely evaluates corneal pathology specimens by correlative light, transmission and scanning electron microscopy. This procedure has provided new and in some cases previously undocumented corneal pathologic surface morphology of epithelial downgrowth, experimental epithelial-endothelial interactions and ichthyosiform erythroderma.     

Comparison between direct methods for determination of microbial cell volume: electron microscopy and electronic particle sizing.

Size frequency distributions of different phototrophic and heterotrophic microorganisms were determined by means of scanning and transmission electron microscopy and electronic particle sizing. Statistically significant differences existed among the three techniques used in this study. Cells processed for electron microscopy showed lower mean cellular volumes than those processed for electronic particle sizing, reflecting a shrinkage by factors ranging from 1.1 to 6.2 (mean, 2.3). Processing of cells for scanning electron microscopy caused higher shrinkage than processing for transmission electron microscopy. Shrinkage was dependent neither on the size nor on the cell wall type of the microorganism. When processed for scanning electron microscopy, phototrophic bacteria were strongly shrunken, whereas heterotrophic microorganisms were less affected. A direct relationship existed among phototrophic bacteria between percentage of shrinkage and specific pigment content. This was probably a consequence of the pigment extraction by organic solvents during the dehydration process, previous to the critical point drying, necessary to examine the specimens under the scanning electron microscope.     

Insect morphology in the age of phylogenomics: innovative techniques and its future role in systematics

A brief account of the history of insect morphology is given. Different techniques and analytical methods used in current projects on insect morphology and phylogeny and their optimized combined application are described. These include fixation, dissection, maceration, histology (microtome sectioning), scanning electron microscopy (SEM), transmission electron microscopy (TEM), serial block‐face scanning electron microscopy (SBFSEM), focused ion beam scanning electron microscopy (FIB/SEM), confocal laser scanning microscopy (CLSM), bleaching, micro‐computed tomography (μCT), computer‐based three‐dimensional reconstruction, focus stacking of digital images, geometric morphometrics and the storage of morphological metadata. The role of insect morphology in the “age of phylogenomics” is discussed.     

Serial block face scanning electron microscopy—the future of cell ultrastructure imaging

One of the major drawbacks in transmission electron microscopy has been the production of three-dimensional views of cells and tissues. Currently, there is no one suitable 3D microscopy technique that answers all questions and serial block face scanning electron microscopy (SEM) fills the gap between 3D imaging using high-end fluorescence microscopy and the high resolution offered by electron tomography. In this review, we discuss the potential of the serial block face SEM technique for studying the three-dimensional organisation of animal, plant and microbial cells.     

Freeze-fracture electron microscopy of lipid membranes on colloidal polyelectrolyte multilayer coated supports

Lipid membranes were assembled on polyelectrolyte (PE)-coated colloidal particles. The assembly was studied by means of confocal microscopy, flow cytometry, scanning force microscopy, and freeze-fracture electron microscopy. A homogeneous lipid coverage was established within the limits of optical resolution. Flow cytometry showed that the lipid coverage was uniform. Freeze-fracture electron microscopy revealed that the lipid was adsorbed as a bilayer, which closely followed the surface profile of the polyelectrolyte support. Additional adsorption of polyelectrolyte layers on top of the lipid bilayer introduced inhomogeneities as evident from jumps in the fracture plane. Characteristic lipid multilayers have not been seen with freeze-fracture electron microscopy.     

Brittle fracture of epidermal cells by liquid shear.

A suspension of epidermal cells obtained from pig tail skin by trypsinization was subjected to high liquid-shear forces in a French press. The material issuing from the press was examined by phase-contrast microscopy, transmission electron microscopy and scanning electron microscopy. The cytoskeleton of tonofibrils retained the shape of cell fragments, and subcellular organelles remained enmeshed in the network of tonofibrils. Examination of some cell fragments by scanning electron microscopy revealed the internal organization of the tonofibrils. The relevance of these findings to the problem of isolating subcellular fractions from epidermis is discussed.     

Conditions critical for optimal visualization of bacteriophage adsorbed to bacterial surfaces by scanning electron microscopy.

The potential of scanning electron microscopy as a tool for the detection of viruses on cell surfaces has been studied using bacteriophage P1 adsorbed to Shigella dysenteriae as a model system. Viral particles were readily detectable by scanning electron microscopy on the surface of infected cells which were fixed with glutaraldehyde followed by postfixation in OsO4 and prepared by critical point drying. The virus-studded surface of the infected cells differed markedly from the relatively smooth surfaces of uninfected control cells. Examination of the same preparations with transmission electron microscopy revealed numerous viral particles adsorbed to the surfaces of infected cells, whereas the control cells were free of viruses as expected. Glutaraldehyde fixation alone did not preserve the surface detail of infected cells: cells adsorbed with viruses were not distinguishable from control cells by scanning electron microscopy although by transmission electron microscopy viruses could be visualized. Air drying from water or absolute alcohol resulted in unsatisfactory preservation as compared to the appearance of infected cells prepared by the critical point method. Thus, scanning electron microscopy is capable of resolving viral particles on cell surfaces, but detection of these particles is completely dependent both on the method of fixation and on the technique of drying used.     

Imaging of plant microtubules with high resolution scanning electron microscopy

Summary High resolution scanning electron microscopy was used to obtain images of cortical microtubules and associated structures in onion root tips. Specimens were prepared using a modified quick-freeze deep-etch technique utilising cytosolic extraction with saponin and conductive staining with osmium.Abbreviations DMSO dimethylsulfoxide - HRSEM high resolution scanning electron microscope/microscopy - MTSB microtubule stabilising buffer - TEM transmission electron microscope/microscopy     

Ponceau-Fuchsin as a Routine Countebstain

A new technique for studying the morphology of the cochlea is described. The development of back-scattered electron (BSE) detectors has allowed the examination of heavy-metal stained tissues by scanning electron microscopy. Comparison with light microscopy on adjacent resin sections through whole decalcified cochleae demonstrated that the back-scattered electron technique provides equal or superior clarity and resolution throughout the light microscope range of magnification, allows identification of lysosomes, mitochondria and endoplasmic reticulum, and extends useful magnification into the range previously associated only with transmission electron microscopy. Back-scattered electron imaging enables the study of sections of the undissected cochlea at high magnifications and resolution.     

Back-scattered electron imaging of sections through the cochlea: a new technique for studying cochlear morphology

A new technique for studying the morphology of the cochlea is described. The development of back-scattered electron (BSE) detectors has allowed the examination of heavy-metal stained tissues by scanning electron microscopy. Comparison with light microscopy on adjacent resin sections through whole decalcified cochleae demonstrated that the back-scattered electron technique provides equal or superior clarity and resolution throughout the light microscope range of magnification, allows identification of lysosomes, mitochondria and endoplasmic reticulum, and extends useful magnification into the range previously associated only with transmission electron microscopy. Back-scattered electron imaging enables the study of sections of the undissected cochlea at high magnifications and resolution.     

Structural and Ultrastructural Characteristics of Bone-Tendon Junction of the Calcaneal Tendon of Adult and Elderly Wistar Rats

Tendons are transition tissues that transfer the contractile forces generated by the muscles to the bones, allowing movement. The region where the tendon attaches to the bone is called bone-tendon junction or enthesis and may be classified as fibrous or fibrocartilaginous. This study aims to analyze the collagen fibers and the cells present in the bone-tendon junction using light microscopy and ultrastructural techniques as scanning electron microscopy and transmission electron microscopy. Forty male Wistar rats were used in the experiment, being 20 adult rats at 4 months-old and 20 elderly rats at 20 months-old. The hind limbs of the rats were removed, dissected and prepared to light microscopy, transmission electron microscopy and scanning electron microscopy. The aging process showed changes in the collagen fibrils, with a predominance of type III fibers in the elderly group, in addition to a decrease in the amount of the fibrocartilage cells, fewer and shorter cytoplasmic processes and a decreased synthetic capacity due to degradation of the organelles involved in synthesis.