Spectroscopic studies of the oxidation of ferric CYP153A6 by peracids: Insights into P450 higher oxidation states

Our previous rapid-scanning stopped-flow studies of the reaction of substrate-free cytochrome P450cam with peracids [T. Spolitak, J.H. Dawson, D.P. Ballou, J. Biol. Chem. 280 (2005) 20300-20309; J. Inorg. Biochem. 100 (2006) 2034-2044; J. Biol. Inorg. Chem. 13 (2008) 599-611] spectrally characterized compound I (ferryl iron plus a porphyrin π-cation radical (Fe^IVO/Por⁺)), Cpd ES, and Cpd II (Fe^IVO/Tyr or Fe^IVO). We now report that reactions of CYP153A6 with peracids yield all these intermediates, with kinetic profiles allowing better resolution of all forms at pH 8.0 compared to similar reactions with WT P450cam. Properties of the reactions of these higher oxidation state intermediates were determined in double-mixing experiments in which intermediates are pre-formed and ascorbate is then added. Reactions of heptane-bound CYP153A6 (pH 7.4) with mCPBA resulted in conversion of P450 to the low-spin ferric form, presumably as heptanol was formed, suggesting that CYP 153A6 is a potential biocatalyst that can use peracids with no added NAD(P)H or reducing systems for bioremediation and other industrial applications.     

Asymmetric synthesis of chiral 2-hydroxy ketones by coupled biocatalytic alkene oxidation and CC bond formation

Two different biocatalytic reactions – a CC cleavage and a CC forming reaction – were evaluated concerning their application in a reaction sequence. In the overall reaction, an aromatic alkene was converted to a chiral 2-hydroxy ketone. In the first step, the olefin trans-anethole was converted to para-anisaldehyde and acetaldehyde by an aqueous extract of the white rot fungus Trametes hirsuta G FCC 047. The selective oxidative cleavage of the carbon–carbon double bond was achieved using molecular oxygen as a substrate. In a second step p-anisaldehyde was ligated to acetaldehyde to yield either (R)- or (S)-2-hydroxy-1-(4-methoxyphenyl)-propanone. The reaction was catalyzed by the enantiocomplementary CC bond forming enzymes benzaldehyde lyase and benzoylformate decarboxylase, respectively.     

Alkoxy-substituted group 6 allenylidene complexes - Synthesis and properties

Bis(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)OR], as well as mono(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)Ph], of chromium and tungsten are accessible from propynones [HCCC(O)Ph] or propynoic acid esters [HCCC(O)OR; R = Et, (−)-menthyl, endo-bornyl] by the following reaction sequence: (a) deprotonation of the alkynes, (b) reaction with [(CO)₅M-THF] (M = Cr, W), and (c) alkylation of the resulting alkynyl metallate, [(CO)₅MCCC(O)R], with Meerwein salts. Vinylidene complexes, [(CO)₅MCC(R′)C(O)OR], are formed as a by-product by C_β-alkylation of the alkynyl metallate. Dimethylamine displaces one alkoxy substituent of the bis(alkoxy)allenylidene complexes to give dimethylamino(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR)NMe₂]. The analogous reaction of dimethylamine with a mono(alkoxy)-substituted allenylidene complex affords the aminoallenylidene complex [(CO)₅CrCCC(NMe₂)Ph]. When the amine is used in large excess, the α,β-unsaturated aminocarbene complex [(CO)₅CrC(NMe₂)C(H)C(NMe₂)Ph] is additionally formed by addition of the amine across the C_αC_β-bond of the allenylidene ligand. The reaction of [(CO)₅MCCC(OEt)₂] with dimethyl ethylenediamine offers access to bis(amino)allenylidene complexes, in which C_γ is part of a five-membered heterocycle. Photolysis of bis(alkoxy)allenylidene complexes in the presence of triphenylphosphine yields tetracarbonyl- and tricarbonyl{bis(phosphine)}allenylidene complexes. Diethylaminopropyne inserts into the C_βC_γ bond of [(CO)₅MCCC(OEt)OMethyl] to give alkenylallenylidene complexes. Subsequent acid-catalyzed intramolecular cyclization affords a pyranylidene complex.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

A closer look at the phosphorus-phosphorus double bond lengths in meta-terphenyl substituted diphosphenes

The single crystal X-ray structure of DmpPPDmp (1, Dmp = 2,6-Mes₂C₆H₃), which was previously reported to have a relatively short PP bond distance of 1.985(2) Å at room temperature, has been reexamined at variable temperatures. Crystallographic analyses of 1 at 100 K allow for resolution of disorder of the two phosphorus atoms (which is unresolvable from room temperature diffraction data), and for determination of a more conventional PP bond length of 2.029(1) Å. Single crystals of the closely related diphosphene DxpPPDxp (2, Dxp = 2,6-(2,6-Me₂C₆H₃)₂C₆H₃) show similar disorder in one of two crystallographically independent molecules in the unit cell. A value of 2.0276(4) Å is found for the non-disordered PP bonds at 100 K for 2. A new diphosphene Ar′PPAr′ (3, Ar′ = 2,6-Mes₂-4-OMe-C₆H₃) has been prepared and its structure has also been examined. The PP bond length for 3 was determined to be 2.0326(9) Å and relatively free of the effects of disorder.     

Study on hydrogen bonds of carboxymethyl cellulose sodium film with two-dimensional correlation infrared spectroscopy

Carboxymethyl cellulose is widely used in many industrial aspects and also in laboratory due to its good biocompatibility. However, special researches on infrared especially aiming at the hydrogen bonds structure of carboxymethyl cellulose were relatively poor. We demonstrate here a full view of infrared spectroscopy in the temperature range of 40–220 °C, mainly aiming at the hydrogen bonds in the NaCMC film. The two important transition points was defined with DSC and together with Infrared analysis, that is, 100 °C corresponding to the complete loss of water molecules and 170 °C to the starting temperature point the O6H6 being oxidized. The series of IR spectra during heating from 40 to 220 °C was analyzed by the two-dimensional correlation method. We found that the water molecules bound with CO groups and OH groups. With the evaporating of water molecules, the hydrated CO groups gradually transited into non-hydrated CO groups. As the temperature continued to increase, the intrachain hydrogen bonds were weakened and transited into weak hydrogen bonds. When the temperature was higher than 170 °C, the O6H6 groups were gradually oxidized and thus the interchain hydrogen bonds formed between CH₂COONa groups and O6H6 were weakened. In summary, we defined the main sorts of hydrogen bonds in carboxymethyl cellulose and pictured the changes of the hydrogen bonds structure during heating process, which may provide for the further application in both industry aspects and laboratory use.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Viscosity-temperature behavior of chitin solutions using lithium chloride/DMA as solvent

Solutions of chitin in Li⁺/N,N-dimethylacetamide systems were studied via viscometry, using LiCl concentrations of 3% and 5% (m/v) and chitin concentrations ranging from 0.075 to 0.375 g L⁻¹. The reduced viscosity number versus concentration plot showed a minimum that was related to the formation of Li⁺–OC complex moieties along chitin macromolecular chains. Viscosity behavior was affected by temperature according to the Eyring model: concentration dependence of flow enthalpy of activation was correlated to polymer–polymer interactions and flow entropy of activation to the stiffness of the complexed chitosan macromolecular chain.     

Gas-phase molecular structures of substituted 1,3-bisketenes: A challenge for theory and experiment

Molecular structures of dimethylbis(trimethylsilylketyl)silane (Me₂Si[C(SiMe₃)CO]₂), dimethylbis(trimethylgermylketyl)silane (Me₂Si[C(GeMe₃)CO]₂), and dimethylbis(trimethylstannylketyl)germane (Me₂Ge[C(SnMe₃)CO]₂) have been studied in the gas phase by electron diffraction accompanied by high level ab initio and DFT calculations. Extensive theoretical conformational analyses of the molecules in the vapour predicted a possibility of existence of two types of conformers with small energy differences. The first type had gauche-gauche arrangements of the ketenyl groups in the central C(CO)XC(CO) fragments directed away from each other. The second type had nearly syn-gauche arrangements of the ketenyl groups. In addition, the energy differences were found to depend on the level of computations used. The experimental analysis, in turn, was unable to distinguish between different conformers due to the large number of similar overlapping distances. The experimental data were fitted by an averaged single-conformer model, which nevertheless allowed reliable determination of bonds and bonded angles in the molecules. Main experimental (r_h1) structural parameters for Me₂Si[C(SiMe₃)CO]₂, Me₂Si[C(GeMe₃)CO]₂, and Me₂Ge[C(SnMe₃)CO]₂, i.e. Me₂X[C(YMe₃)CO]₂ (X,Y = Si, Ge, Sn), are (X-C)_mean 187.7(1) pm, 194.6(2) pm, 216.1(3) pm; (Y-C)_mean, 187.7(1) pm, 188.8(8) pm, 194.6(4) pm; (CC)_mean, 135.3(5) pm, 131.6(5) pm, 131.5(13) pm; (CO)_mean, 117.0(7) pm, 117.4(7) pm, 119.0(11) pm; (C-H)_mean, 110.6(7) pm, 110.0(4) pm, 109.1(13) pm; (X(Y)-CC)_mean, 114.4(2)°, 115.6(1)°, 115.6(2)°; (C-X(Y)-C_Me)_mean, 108.3(3)°, 108.4(3)°, 108.9(13)°; C(2)-C(1)-Y(4)-C(10), −19(6)°, 5(4)°, −9(10)°; C(7)-C(6)-Y(9)-C(38),−22(7)°, −32(3)°, −9(10)°; C(2)-C(1)-X(5)-C(6), 128(4)°, 142(1)°, 108(9)°; C(7)-C(6)-X(5)-C(1), 92(6)°, 115(2)°, 108(9)°, respectively.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Vinyl-ruthenium entities as markers for intramolecular electron transfer processes

The present account summarizes our work on mononuclear vinyl ruthenium complexes of the type RuCl(CHCHR′)(CO)(PR₃)₂L, divinyl-bridged diruthenium complexes {RuCl(CO)(PR₃)₂L}₂(μ-CHCH-bridge-CHCH) and on heterobinuclear systems where only one of the two redox-active metal-organic moieties is of the vinyl ruthenium type. The favourable electrochemical properties of the {RuCl(CO)(PR₃)₂L(CHCH-) tag and the various spectroscopic handles offered by that unit provide detailed insights into the charge and spin delocalization over the {MCl(CO)(PR₃)₂L} and CHCHR′ constituents in their associated radical cations. They also offer a convenient means for measuring electronic coupling in the mixed-valent radical cations of the homo- and heterodinuclear vinyl-bridged complexes and, under favourable circumstances, on the rate of intramolecular electron transfer between the individual redox sites. Aspects of this work include examples of complexes showing time-dependent valence trapping, complexes aimed at delineating the efficiencies of through-space versus through-bond pathways for electron delocalization, complexes where electrostatic effects on the redox splitting ΔE_1/2 dominate over those from the resonance contribution and systems that exhibit extensive charge and spin delocalization between two dislike endgroups despite their intrinsically different redox potentials.     

Synthesis and characterisation of isomeric cycloaurated complexes derived from the iminophosphorane Ph3PNC(O)Ph

Using different organomercury substrates, two isomeric cycloaurated complexes derived from the stabilised iminophosphorane Ph₃PNC(O)Ph were prepared. Reaction of Ph₃PNC(O)Ph with PhCH₂Mn(CO)₅ gave the manganated precursor (CO)₄Mn(2-C₆H₄C(O)NPPh₃), metallated on the C(O)Ph substituent, which yielded the organomercury complex ClHg(2-C₆H₄C(O)NPPh₃) by reaction with HgCl₂ in methanol. Transmetallation of the mercurated derivative with Me₄N[AuCl₄] gave the cycloaurated iminophosphorane AuCl₂(2-C₆H₄C(O)NPPh₃) with an exo PPh₃ substituent. The endo isomer AuCl₂(2-C₆H₄Ph₂PNC(O)Ph) [aurated on a PPh₃ ring] was obtained by an independent reaction sequence, involving reaction of the diarylmercury precursor Hg(2-C₆H₄P(NC(O)Ph)Ph₂)₂ [prepared from the known compound Hg(2-C₆H₄PPh₂)₂ and PhC(O)N₃] with Me₄N[AuCl₄]. Both of the isomeric iminophosphorane derivatives were structurally characterised, together with the precursors (2-HgClC₆H₄)C(O)NPPh₃ and (CO)₄Mn(2-C₆H₄C(O)NPPh₃). The utility of ³¹P NMR spectroscopy in monitoring reaction chemistry in this system is described.     

Mononuclear and dinuclear iridium and heterodinuclear iridium-rhodium complexes derived from 1,4-C6H4(CCSiMe3)2 as precursor

The labile iridium(I) precursor trans-[IrCl(C₈H₁₄)(PiPr₃)₂] (2), prepared in situ from [IrCl(C₈H₁₄)₂]₂ (1) and PiPr₃, reacted with equimolar amounts of 1,4-C₆H₄(CCSiMe₃)₂ (3) at 60 °C to give the mononuclear vinylidene complex trans-[IrCl(CC(SiMe₃)C₆H₄CCSiMe₃)(PiPr₃)₂] (4). From 2 and 3 in the molar ratio of 2:1, the dinuclear compound trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)IrCl(PiPr₃)₂] (5) was obtained. Reaction of 4 with [RhCl(PiPr₃)₂]₂ (6) at room temperature afforded the heterodinuclear alkyne(vinylidene) complex trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄CCSiMe₃)RhCl(PiPr₃)₂] (7), which on heating at 45 °C was converted to the bis(vinylidene) isomer trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)RhCl(PiPr₃)₂] (8).     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Ruthenium hydride and vinyl complexes supported by nitrogen-oxygen mixed-donor ligands

The Schiff base, 2-chlorophenylsalicylaldimine (HL₁), is formed readily from salicylaldehyde and 2-chloroaniline. After deprotonation, this ligand is found to react as a bidentate mixed-donor chelate with the complexes [RuRCl(CO)(BTD)(PPh₃)₂] (R = H, CHCHC₆H₅, CHCHC₆H₄Me-4, CHCH^tBu, CCCPhCHPh; BTD = 2,1,3-benzothiadiazole) to form the compounds [RuR(L₁)(CO)(PPh₃)₂] through displacement of the chloride and BTD ligands. An analogous reaction occurs with the osmium complex [OsHCl(CO)(BTD)(PPh₃)₂] to provide [OsH(L₁)(CO)(PPh₃)₂]. The compound [Ru(CHCHC₆H₄Me-4)(L₂)(CO)(PPh₃)₂] is formed through reaction of salicylaldehyde (HL₂) with [Ru(CHCHC₆H₄Me-4)Cl(CO)(BTD)(PPh₃)₂] in the presence of base. Two further ligands were investigated to extend the study to encompass 5- and 4-membered chelates; 8-hydroxyquinoline (HL₃) and 2-hydroxy-4-methylquinoline (HL₄) react with [Ru(CHCHPh)Cl(CO)(BTD)(PPh₃)₂] and [Ru(CHCHC₆H₄Me-4)Cl(CO)(BTD)(PPh₃)₂] in the presence of base to yield the complexes [Ru(CHCHPh)(L₃)(CO)(PPh₃)₂] and [Ru(CHCHC₆H₄Me-4)(L₄)(CO)(PPh₃)₂], respectively. The crystal structure of [Ru(CHCHC₆H₄Me-4)(L₁)(CO)(PPh₃)₂] is reported.     

Non-aromatic stabilised form of 3,4-difluoropyrrole at triosmium clusters: N-H and C-H versus C-F activation

Reaction of 3,4-difluoropyrrole with the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] affords products in which C-H, N-H and C-F bonds are cleaved under mild conditions. C-H and N-H bonds are cleaved to give [Os₃H(NCCFCFCH₂)(CO)₁₀] (1) a non-aromatic stabilised form of 3,4-difluoropyrrole. Thermolysis of 1 affords in moderate yields the compounds [Os₃H₂(CCCFCHNH)(CO)₉] (2) and [Os₃H₂(NCHCFCFC)(CO)₉] (3). For compound 3, C-H and N-H bonds are cleaved with concomitant migration of H atoms to the metal framework. In contrast, for compound 2 activation of C-H and C-F bonds leads to coordination of the ligand through the carbon atoms, acting as a four-electron donating species.