Transbilayer effects of raft-like lipid domains in asymmetric planar bilayers measured by single molecule tracking

Cell membranes have complex lipid compositions, including an asymmetric distribution of phospholipids between the opposing leaflets of the bilayer. Although it has been demonstrated that the lipid composition of the outer leaflet of the plasma membrane is sufficient for the formation of raft-like liquid-ordered (l(o)) phase domains, the influence that such domains may have on the lipids and proteins of the inner leaflet remains unknown. We used tethered polymer supports and a combined Langmuir-Blodgett/vesicle fusion (LB/VF) technique to build asymmetric planar bilayers that mimic plasma membrane asymmetry in many ways. We show that directly supported LB monolayers containing cholesterol-rich l(o) phases are inherently unstable when exposed to water or vesicle suspensions. However, tethering the LB monolayer to the solid support with the lipid-anchored polymer 1,2-dimyristoyl phophatidylethanolamine-N-[poly(ethylene glycol)-triethoxysilane] significantly improves stability and allows for the formation of complex planar-supported bilayers that retain >90% asymmetry for 1-2 h. We developed a single molecule tracking (SPT) system for the study of lipid diffusion in asymmetric bilayers with coexisting liquid phases. SPT allowed us to study in detail the diffusion of individual lipids inside, outside, or directly opposed to l(o) phase domains. We show here that l(o) phase domains in one monolayer of an asymmetric bilayer do not induce the formation of domains in the opposite leaflet when this leaflet is composed of palmitoyl-oleoyl phosphatidylcholine and cholesterol but do induce domains when this leaflet is composed of porcine brain phosphatidylcholine, phosphatidylethanolamine, phosphatidylserine, and cholesterol. The diffusion of lipids is similar in l(o) and liquid-disordered phase domains and is not affected by transbilayer coupling, indicating that lateral and transverse lipid interactions that give rise to the domain structure are weak in the biological lipid mixtures that were employed in this work.     

Nonequilibrium behavior in supported lipid membranes containing cholesterol

We investigate lateral organization of lipid domains in vesicles versus supported membranes and monolayers. The lipid mixtures used are predominantly DOPC/DPPC/Chol and DOPC/BSM/Chol, which have been previously shown to produce coexisting liquid phases in vesicles and monolayers. In a monolayer at an air-water interface, these lipids have miscibility transition pressures of approximately 12-15 mN/m, which can rise to 32 mN/m if the monolayer is exposed to air. Lipid monolayers can be transferred by Langmuir-Sch?fer deposition onto either silanized glass or existing Langmuir-Blodgett supported monolayers. Micron-scale domains are present in the transferred lipids only if they were present in the original monolayer before deposition. This result is valid for transfers at 32 mN/m and also at lower pressures. Domains transferred to glass supports differ from liquid domains in vesicles because they are static, do not align in registration across leaflets, and do not reappear after temperature is cycled. Similar static domains are found for vesicles ruptured onto glass surfaces. Although supported membranes on glass capture some aspects of vesicles in equilibrium (e.g., gel-liquid transition temperatures and diffusion rates of individual lipids), the collective behavior of lipids in large liquid domains is poorly reproduced.     

Sphingomyelinase activity causes transbilayer lipid translocation in model and cell membranes

Ceramide is known to induce structural rearrangements in membrane bilayers, including the formation of ceramide-rich and -poor domains and the efflux of aqueous solutes. This report describes a novel effect of ceramide, namely the induction of transbilayer lipid movements. This effect was demonstrated in both model (large unilamellar vesicles) and cell (erythrocyte ghost) membranes in which ceramide generation took place in situ through the action of an externally added sphingomyelinase. Two different novel assays were developed to detect transbilayer lipid movement. One of the assays required the preparation of vesicles containing a ganglioside only in the outer monolayer and entrapped neuraminidase. Sphingomyelinase activity induced ganglioside hydrolysis under conditions in which no neuraminidase was released from the vesicles. The second assay involved the preparation of liposomes or erythrocyte ghosts labeled with a fluorescent energy donor in their inner leaflets. Sphingomyelin hydrolysis was accompanied by fluorescence energy transfer to an impermeable acceptor in the outer aqueous medium. Ceramide-induced transbilayer lipid movement is explained in terms of another well known property of ceramide, namely the facilitation of lamellar to non-lamellar lipid-phase transitions. Thus, sphingomyelinase generates ceramide on one side of the membrane; ceramide then induces the transient formation of non-lamellar structural intermediates, which cause the loss of lipid asymmetry in the bilayer, i.e. the transbilayer movement of ceramide together with other lipids. As direct targets for ceramide tend to be intracellular, these observations may be relevant to the mechanism of transmembrane signaling by means of the sphingomyelin pathway.     

An X-ray diffraction analysis of oriented lipid multilayers containing basic proteins

X-ray diffraction techniques have been used to study the structures of lipid bilayers containing basic proteins. Highly ordered multilayer specimens have been formed by using the Langmuir-Blodgett method in which a solid support is passed through a lipid monolayer held at constant surface pressure at an air/water interface. If the lipid monolayer contains acidic lipids then basic proteins in the aqueous subphase are transferred with the monolayer and incorporated into the multi-membrane stack. X-ray diffraction patterns have been recorded from multilayers of cerebroside sulphate and 40% (molar) cholesterol both with and without polylysine, cytochrome c and the basic protein from central nervous system myelin. Electron density profiles across the membranes have been derived at between 6 A and 12 A resolution. All of the membrane profiles have been placed on an absolute scale of electron density by the isomorphous exchange of cholesterol with a brominated cholesterol analog. The distributions and conformations of the various basic proteins incorporated within the cerebroside sulphate/cholesterol bilayer are very different. Polylysine attaches to the surface of the lipid bilayer as a fully extended chain while cytochrome c maintains its native structure and attaches to the bilayer surface with its short axis approximately perpendicular to the membrane plane. The myelin basic protein associates intimately with the lipid headgroups in the form of an extended molecule, yet its dimension perpendicular to the plane of the membrane of approx. 15 A is consistent with the considerable degree of secondary structure found in solution. In the membrane plane, the myelin basic protein extends to cover an area of about 2500 A2. There is no significant penetration of the protein into the hydrocarbon region of the bilayer or, indeed, beyond the position of the sulphate group of the cerebroside sulphate molecule.     

Transbilayer lipid diffusion promoted by Bax: implications for apoptosis

It is known that the proapoptotic protein Bax facilitates the formation of pores in bilayers, resulting in the release of proteins from the intermitochondrial space. We demonstrate that another consequence of the interaction of Bax with membranes is an increase in the rate of lipid transbilayer diffusion. We use two independent assays for transbilayer diffusion, one involving the formation of asymmetric liposomes by placing a pyrene-labeled lipid into the outer monolayer of preformed vesicles and another assay based on the initial preparation of liposomes having an asymmetric transbilayer distribution of lipids. With both methods we find that oligomeric BaxDeltaC or full-length Bax in the presence of tBid, but not monomeric full-length Bax, strongly promotes the rate of transbilayer diffusion. Although biological membranes exhibit rates of lipid transbilayer diffusion of minutes or less, they are able to maintain an asymmetric distribution of lipids across the bilayer. In the case of mitochondria, cardiolipin is sequestered on the inner leaflet of the inner mitochondrial membrane. However, during apoptosis this lipid translocates to the outer surface of the outer mitochondrial membrane. This phenomenon must involve an increase in the rate of transbilayer diffusion. The results of the present paper demonstrate that an activated form of Bax can cause this increased rate.     

Octyl-beta-D-glucopyranoside partitioning into lipid bilayers: thermodynamics of binding and structural changes of the bilayer.

The interaction of the nonionic detergent octyl-beta-D-glucopyranoside (OG) with lipid bilayers was studied with high-sensitivity isothermal titration calorimetry (ITC) and solid-state 2H-NMR spectroscopy. The transfer of OG from the aqueous phase to lipid bilayers composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) can be investigated by employing detergent at concentrations below the critical micellar concentration; it can be defined by a surface partition equilibrium with a partition coefficient of K = 120 +/- 10 M-1, a molar binding enthalpy of delta H degrees D = 1.3 +/- 0.15 kcal/mol, and a free energy of binding of delta G degrees D = -5.2 kcal/mol. The heat of transfer is temperature dependent, with a molar heat capacity of delta CP = -75 cal K-1 mol-1. The large heat capacity and the near-zero delta H are typical for a hydrophobic binding equilibrium. The partition constant K decreased to approximately 100 M-1 for POPC membranes mixed with either negatively charged lipids or cholesterol, but was independent of membrane curvature. In contrast, a much larger variation was observed in the partition enthalpy. delta H degrees D increased by about 50% for large vesicles and by 75% for membranes containing 50 mol% cholesterol. Structural changes in the lipid bilayer were investigated with solid-state 2H-NMR. POPC was selectively deuterated at the headgroup segments and at different positions of the fatty acyl chains, and the measurement of the quadrupolar splittings provided information on the conformation and the order of the bilayer membrane. Addition of OG had almost no influence on the lipid headgroup region, even at concentrations close to bilayer disruption. In contrast, the fluctuations of fatty acyl chain segments located in the inner part of the bilayer increased strongly with increasing OG concentration. The 2H-NMR results demonstrate that the headgroup region is the most stable structural element of the lipid membrane, remaining intact until the disordering of the chains reaches a critical limit. The perturbing effect of OG is thus different from that of another nonionic detergent, octaethyleneglycol mono-n-dodecylether (C12E8), which produces a general disordering at all levels of the lipid bilayer. The OG-POPC interaction was also investigated with POPC monolayers, using a Langmuir trough. In the absence of lipid, the measurement of the Gibbs adsorption isotherm for pure OG solutions yielded an OG surface area of AS = 51 +/- 3 A2. On the other hand, the insertion area AI of OG in a POPC monolayer was determined by a monolayer expansion technique as AI = 58 +/- 10 A2. The similar area requirements with AS approximately AI indicate an almost complete insertion of OG into the lipid monolayer. The OG partition constant for a POPC monolayer at 32 mN/m was Kp approximately 320 M-1 and thus was larger than that for a POPC bilayer.     

Critical and off-critical miscibility transitions in model extracellular and cytoplasmic myelin lipid monolayers

Monolayers based on the composition of the cytoplasmic (CYT) or extracellular (EXT) sides of the myelin bilayer form coexisting immiscible liquid phases similar to the liquid-ordered/liquid-disordered phases in phospholipid/cholesterol monolayers. Increasing the temperature or surface pressure causes the two liquid phases to mix, although in significantly different fashion for the CYT and EXT monolayers. The cerebroside-rich EXT monolayer is near a critical composition and the domains undergo coalescence and a circle-to-stripe transition along with significant roughening of the domain boundaries before mixing. The phase transition in the cerebroside-free cytoplasmic side occurs abruptly without domain coalescence; hence, the cytoplasmic monolayer is not near a critical composition, although the domains exhibit shape instabilities within 1–2 mN/m of the transition. The change in mixing pressure decreases significantly with temperature for the EXT monolayer, with dΠ_crit/dT ∼ 1.5 mN/m/°C, but the mixing pressure of the CYT monolayer varies little with temperature. This is due to the differences in the nonideality of cholesterol interactions with cerebrosides (EXT) relative to phospholipids (CYT). EXT monolayers based on the composition of white matter from marmosets with experimental allergic encephalomyelitis (EAE), an animal model of multiple sclerosis, remain phase-separated at higher surface pressures than control, while EAE CYT monolayers are similar to control. Myelin basic protein, when added to the CYT monolayer, increases lipid miscibility in CYT monolayers; likely done by altering the dipole density difference between the two phases.     

Polymer-cushioned bilayers. I. A structural study of various preparation methods using neutron reflectometry.

This neutron reflectometry study evaluates the structures resulting from different methods of preparing polymer-cushioned lipid bilayers. Four different techniques to deposit a dimyristoylphosphatidylcholine (DMPC) bilayer onto a polyethylenimine (PEI)-coated quartz substrate were examined: 1) vesicle adsorption onto a previously dried polymer layer; 2) vesicle adsorption onto a bare substrate, followed by polymer adsorption; and 3, 4) Langmuir-Blodgett vertical deposition of a lipid monolayer spread over a polymer-containing subphase to form a polymer-supported lipid monolayer, followed by formation of the outer lipid monolayer by either 3) horizontal deposition of the lipid monolayer or 4) vesicle adsorption. We show that the initial conditions of the polymer layer are a critical factor for the successful formation of our desired structure, i.e., a continuous bilayer atop a hydrated PEI layer. Our desired structure was found for all methods investigated except the horizontal deposition. The interaction forces between these polymer-supported bilayers are investigated in a separate paper (Wong, J. Y., C. K. Park, M. Seitz, and J. Israelachvili. 1999. Biophys. J. 77:1458-1468), which indicate that the presence of the polymer cushion significantly alters the interaction potential. These polymer-supported bilayers could serve as model systems for the study of transmembrane proteins under conditions more closely mimicking real cellular membrane environments.     

Lateral electrical conductivity of mica-supported lipid bilayer membranes measured by scanning tunneling microscopy.

Lateral electric conductivity of mica-supported lipid monolayers and of the corresponding lipid bilayers has been studied by means of scanning tunneling microscopy (STM). The surface of freshly cleaved mica itself was found to be conductive when exposed to humid air. Lipid monolayers were transferred onto such a surface by means of the Langmuir-Blodgett technique, which makes the mica surface hydrophobic and suppresses the electric current along the surface in the experimentally accessible humidity (5-80%) and applied voltage (0-10 V) range. This is true for dipalmitoylphosphatidylethanolamine (DPPE) as well as dipalmitoylphosphatidylcholine (DPPC) monolayers. Repeated deposition of DPPC layers by means of the Langmuir-Blodgett LB technique does not lead to the formation of a stable surface-supported bilayer because of the high hydrophilicity of the phosphatidylcholine headgroups that causes DPPC/DPPC bilayers to peel off the supporting surface during the sample preparation. In contrast to this, a DPPE or a DPPC monolayer on top of a DPPE monolayer gives rise to a rather stable mica-supported bilayer that can be studied by STM. Electric currents between 10 and 100 fA, depending on the ambient humidity, flow along the DPPE bilayer surface, in the humidity range between 35 and 60%. The DPPC surface, which is more hydrophilic, is up to 100 times more conductive under comparable conditions. Anomalous high lateral conductivity thus depends on, and probably proceeds via, the surface-adsorbed water layers. The prominence of ambient humidity and surface hydrophilicity on the measured lateral currents suggests this.(ABSTRACT TRUNCATED AT 250 WORDS)     

The effect of ethanol on the physical properties of neuronal membranes

Intramolecular excimer formation of 1,3-di(1-pyrenyl) propane(Py-3-Py) and fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) were used to evaluate the effect of ethanol on the rate and range of lateral and rotational mobilities of bulk bilayer structures of synaptosomal plasma membrane vesicles (SPMVs) from the bovine cerebral cortex. Ethanol increased the excimer to monomer fluorescence intensity ratio (I'/I) of Py-3-Py in the SPMVs. Selective quenching of both DPH and Py-3-Py by trinitrophenyl groups was used to examine the range of transbilayer asymmetric rotational mobility and the rate and range of transbilayer asymmetric lateral mobility of SPMVs. Ethanol increased the rotational and lateral mobility of the outer monolayer more than of the inner one. Thus ethanol has a selective fluidizing effect within the transbilayer domains of the SPMVs. Radiationless energy transfer from the tryptophans of membrane proteins to Py-3-Py was used to examine both the effect of ethanol on annular lipid fluidity and protein distribution in the SPMVs. Ethanol increased annular lipid fluidity and also caused membrane proteins to cluster. These effects on neuronal membranes may be responsible for some, though not all, of the general anesthetic actions of ethanol.     

Orientation and penetration depth of monolayer-bound p40phox-PX

X-ray reflectivity was used to study the interaction of the PX domain of p40(phox) protein (p40(phox)-PX) with a Langmuir monolayer of a mixture of SOPC (1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine), SOPS (1-stearoyl-2-oleoyl-sn-glycero-3-phosphoserine), and DPPtdIns(3)P (1,2-dipalmitoylphosphatidylinositol 3-phosphate) lipids supported on a buffered aqueous solution. The reflectivity is analyzed in terms of the known crystallographic structure of the p40(phox)-PX domain and a slab model that represents the lipid layer, yielding an electron density profile of the lipid layer and bound PX domains. This analysis determines the angular orientation and penetration depth of the p40(phox)-PX domain bound to the SOPC/SOPS/DPPtdIns(3)P monolayer. The best fit orientation is characterized by the following angles: theta = 30 +/- 10 degrees and phi = 140 +/- 30 degrees. These angles describe rotations, about axes in a coordinate system fixed to the domain, that are required to orient the domain with respect to the lipid layer at the interface. The protein penetrated into the lipid layer by 9 +/- 2 A, indicating that the protein penetrated into the headgroup region, but not deeply into the hydrocarbon region of the monolayer. In this analysis, polar Tyr(94) and hydrophobic Val(95) penetrated deepest into the lipid monolayer. The backbone of these residues was approximately 5 A above the headgroup-buffer interface, i.e., at the level of the SOPC/SOPS lipid phosphates. Positively charged Lys(92) and Lys(98) were also near the SOPC/SOPS lipid phosphates. This position of the protein allows for a favorable electrostatic contribution to binding.     

Correlation of AFM and SFA measurements concerning the stability of supported lipid bilayers

Phospholipid bilayers were studied by means of atomic force microscopy (AFM) and a surface force apparatus (SFA). The stability of the supported bilayers was described by the amount of irregularities in the topography of the membrane by means of AFM and by the occurrence of hemifusion in the SFA, which is an indicator of defective bilayers. The bilayers, composed of lipids having the same headgroup but different chain lengths in the two leaflets, were prepared by Langmuir-Blodgett deposition and transferred at different surface pressures. The topography of the supported bilayers in aqueous solution, as imaged by AFM, revealed an increasing number of defects in the supported lipid membranes with decreased deposition pressure of the outer lipid layer. These defects, which appeared in the form of monolayer and bilayer (self-assembled) thick holes within the membrane, were energetically favorable over an evenly depleted bilayer. We found that the quantity of these defects (holes of 相似文献   

Galactosylceramide domain microstructure: impact of cholesterol and nucleation/growth conditions

Galactosylceramide (GalCer), a glycosphingolipid, is believed to exist in the extracellular leaflet of cell membranes in nanometer-sized domains or rafts. The local clustering of GalCer within rafts is thought to facilitate the initial adhesion of certain viruses, including HIV-1, and bacteria to cells through multivalent interactions between receptor proteins (gp120 for HIV-1) and GalCer. Here we use atomic force microscopy (AFM) to study the effects of cholesterol on solid-phase GalCer domain microstructure and miscibility with a fluid lipid 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) in supported lipid bilayers. Using "slow-cooled vesicle fusion" to prepare the supported lipid bilayers, we were able to overcome the nonequilibrium effects of the substrate (verified by comparison to results for giant unilamellar vesicles) and accurately quantify the dramatic effect of cholesterol on the GalCer domain surface area/perimeter ratio (A(D)/P) and DLPC-GalCer miscibility. We compare these results to a supported lipid bilayer system in which the bilayer is rapidly cooled (nonequilibrium conditions), "quenched vesicle fusion", and find that the microstructures are remarkably similar above a cholesterol mol fraction of approximately 0.06. We determined that GalCer domains were contained in one leaflet distal to the mica substrate through qualitative binding experiments with Trichosanthes kirilowii agglutinin (TKA), a galactose-specific lectin, and AFM of Langmuir-Blodgett deposited GalCer/DLPC supported lipid bilayers. In addition, GalCer domains in bilayers containing cholesterol rearranged upon tip-sample contact. Our results further serve to clarify why discrepancies exist between different model membrane systems and between model membranes and cell membranes. In addition, these results offer new insight into the effect of cholesterol and surrounding lipid on domain microstructure and behavior. Finally, our observations may be pertinent to cell membrane structure, dynamics, and HIV infection.     

Experimental validation of molecular dynamics simulations of lipid bilayers: a new approach

A novel protocol has been developed for comparing the structural properties of lipid bilayers determined by simulation with those determined by diffraction experiments, which makes it possible to test critically the ability of molecular dynamics simulations to reproduce experimental data. This model-independent method consists of analyzing data from molecular dynamics bilayer simulations in the same way as experimental data by determining the structure factors of the system and, via Fourier reconstruction, the overall transbilayer scattering-density profiles. Multi-nanosecond molecular dynamics simulations of a dioleoylphosphatidylcholine bilayer at 66% RH (5.4 waters/lipid) were performed in the constant pressure and temperature ensemble using the united-atom GROMACS and the all-atom CHARMM22/27 force fields with the GROMACS and NAMD software packages, respectively. The quality of the simulated bilayer structures was evaluated by comparing simulation with experimental results for bilayer thickness, area/lipid, individual molecular-component distributions, continuous and discrete structure factors, and overall scattering-density profiles. Neither the GROMACS nor the CHARMM22/27 simulations reproduced experimental data within experimental error. The widths of the simulated terminal methyl distributions showed a particularly strong disagreement with the experimentally observed distributions. A comparison of the older CHARMM22 with the newer CHARMM27 force fields shows that significant progress is being made in the development of atomic force fields for describing lipid bilayer systems empirically.     

Synaptotagmin 1 modulates lipid acyl chain order in lipid bilayers by demixing phosphatidylserine

Synaptotagmin 1 (syt1) functions as the Ca(2+) sensor in neuronal exocytosis, and it has been proposed to act by modulating lipid bilayer curvature. Here we examine the effect of the two C2 domains (C2A and C2B) of syt1 on membrane lipid order and lateral organization. In mixtures of phosphatidylcholine and phosphatidylserine (PS), attenuated total internal reflection Fourier transform infrared spectroscopy indicates that a fragment containing both domains (C2AB) or C2B alone disorders the lipid acyl chains, whereas the C2A domain has little effect upon chain order. Two observations suggest that these changes reflect a demixing of PS. First, the changes in acyl chain order are reversed at higher protein concentration; second, selective lipid deuteration demonstrates that the changes in lipid order are associated only with the PS component of the bilayer. Independent evidence for lipid demixing is obtained from fluorescence self-quenching of labeled lipid and from natural abundance (13)C NMR, where heteronuclear single quantum correlation spectra reveal Ca(2+)-dependent chemical shift changes for PS, but not for phosphatidylcholine, in the presence of the syt1 C2 domains. The ability of syt1 to demix PS is observed in a range of lipid mixtures that includes cholesterol, phosphatidylethanolamine, and varied PS content. These data suggest that syt1 might facilitate SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptors)-mediated membrane fusion by phase separating PS, a process that is expected to locally buckle bilayers and disorder lipids due to the curvature tendencies of PS.     

Transbilayer (flip-flop) lipid motion and lipid scrambling in membranes

This paper reviews the current knowledge on the various mechanisms for transbilayer, or flip-flop, lipid motion in model and cell membranes, enzyme-assisted lipid transfer by flippases, floppases and scramblases is briefly discussed, while non-catalyzed lipid flip-flop is reviewed in more detail. Transbilayer lipid motion may occur as a result of the insertion of foreign molecules (detergents, lipids, or even proteins) in one of the membrane leaflets. It may also be the result of the enzymatic generation of lipids, e.g. diacylglycerol or ceramide, at one side of the membrane. Transbilayer motion rates decrease in the order diacylglycerol ? ceramide ? phospholipids. Ceramide, but not diacylglycerol, can induce transbilayer motion of other lipids, and bilayer scrambling. Transbilayer lipid diffusion and bilayer scrambling are defined as two conceptually and mechanistically different processes. The mechanism of scrambling appears to be related to local instabilities caused by the non-lamellar ceramide molecule, or by other molecules that exhibit a relatively slow flip-flop rate, when asymmetrically inserted or generated in one of the monolayers in a cell or model membrane.     

Relation between lipid polymorphism and transbilayer movement of lipid in rat liver microsomes

We have studied the effects of trinitrophenylation on the transbilayer movement of phosphatidylcholine and the macroscopic lipid structure in rat liver microsomal membranes. The transbilayer movement of phosphatidylcholine was investigated using the PC-specific transfer protein. ³¹P-NMR was employed to monitor the phospholipid organization in intact microsomal vesicles. The results indicate that modification of microsomes with trinitrobenzenesulfonic acid enhances the transbilayer movement of phosphatidylcholine at 4°C. Furthermore, phosphatidylethanolamine headgroup trinitrophenylation in microsomes increases the isotropic component in the ³¹P-NMR spectra even at 4°C, possibly representing the appearance of intermediate non-bilayer lipid structures. The observed parallel between these data suggests that phosphatidylethanolamine molecules in the microsomal membrane, probably in combination with a protein component, are able to destabilize the bilayer organization, thereby facilitating the transmembrane movement of phospholipids.     

Covalent attachment of functionalized lipid bilayers to planar waveguides for measuring protein binding to biomimetic membranes.

A new method is presented for measuring sensitively the interactions between ligands and their membrane-bound receptors in situ using integrated optics, thus avoiding the need for additional labels. Phospholipid bilayers were attached covalently to waveguides by a novel protocol, which can in principle be used with any glass-like surface. In a first step, phospholipids carrying head-group thiols were covalently immobilized onto SiO2-TiO2 waveguide surfaces. This was accomplished by acylation of aminated waveguides with the heterobifunctional crosslinker N-succinimidyl-3-maleimidopropionate, followed by the formation of thioethers between the surface-grafted maleimides and the synthetic thiolipids. The surface-attached thiolipids served as hydrophobic templates and anchors for the deposition of a complete lipid bilayer either by fusion of lipid vesicles or by lipid self-assembly from mixed lipid/detergent micelles. The step-by-step lipid bilayer formation on the waveguide surface was monitored in situ by an integrated optics technique, allowing the simultaneous determination of optical thickness and one of the two refractive indices of the adsorbed organic layers. Surface coverages of 50-60% were calculated for thiolipid layers. Subsequent deposition of POPC resulted in an overall lipid layer thickness of 45-50 A, which corresponds to the thickness of a fluid bilayer membrane. Specific recognition reactions occurring at cell membrane surfaces were modeled by the incorporation of lipid-anchored receptor molecules into the supported bilayer membranes. (1) The outer POPC layer was doped with biotinylated phosphatidylethanolamine. Subsequent specific binding of streptavidin was optically monitored. (2) A lipopeptide was incorporated in the outer POPC monolayer. Membrane binding of monoclonal antibodies, which were directed against the peptide moiety of the lipopeptide, was optically detected. The specific antibody binding correlated well with the lipopepitde concentration in the outer monolayer.     

Humicola lanuginosa lipase hydrolysis of mono-oleoyl-rac-glycerol at the lipid-water interface observed by atomic force microscopy

A new type of planar lipid substrate for Humicola lanuginosa lipase (HLL) has been prepared by depositing a monolayer of 1-mono-oleoyl-rac-glycerol (MOG) on top of a monolayer of dipalmitoyl-phosphatidylcholine (DPPC) on mica by the Langmuir-Blodgett (LB) technique. The bilayer was subsequently exposed to HLL in a liquid cell of an atomic force microscope (AFM) allowing the time course of the lipolytic degradation to be observed. By analysing a series of AFM images, we find that enzymes are preferentially activated at the edge of nano-scale defects present in the bilayer prior to enzyme injection, while defect-free areas of the substrate are surprisingly stable towards enzyme degradation. The initial rate of hydrolysis is found to be proportional to the perimeter length, P, of the initial nano-scale defects as well as the bulk enzyme concentration, c(HLL); d(lipid)/dt=k P c(HLL). We estimate the specific rate of MOG hydrolysis by HLL to be 2.5x10(4) MOG molecules/(minute x molecule of HLL).     

Effects of sphingomyelin, cholesterol and zinc ions on the binding, insertion and aggregation of the amyloid Abeta(1-40) peptide in solid-supported lipid bilayers

We utilized plasmon-waveguide resonance (PWR) spectroscopy to follow the effects of sphingomyelin, cholesterol and zinc ions on the binding and aggregation of the amyloid beta peptide(1-40) in lipid bilayers. With a dioleoylphosphatidylcholine (DOPC) bilayer, peptide binding was observed, but no aggregation occurred over a period of 15 h. In contrast, similar binding was found with a brain sphingomyelin (SM) bilayer, but in this case an exponential aggregation process was observed during the same time interval. When the SM bilayer included 35% cholesterol, an increase of approximately 2.5-fold occurred in the amount of peptide bound, with a similar increase in the extent of aggregation, the latter resulting in decreases in the bilayer packing density and displacement of lipid. Peptide association with a bilayer formed from equimolar amounts of DOPC, SM and cholesterol was followed using a high-resolution PWR sensor that allowed microdomains to be observed. Biphasic binding to both domains occurred, but predominantly to the SM-rich domain, initially to the surface and at higher peptide concentrations within the interior of the bilayer. Again, aggregation was observed and occurred within both microdomains, resulting in lipid displacement. We attribute the aggregation in the DOPC-enriched domain to be a consequence of lipid mixing within these microdomains, resulting in the presence of small amounts of SM and cholesterol in the DOPC microdomain. When 1 mM zinc was present, an increase of approximately threefold in the amount of peptide association was observed, as well as large changes in mass and bilayer structure as a consequence of peptide aggregation, occurring without loss of bilayer integrity. A structural interpretation of peptide interaction with the bilayer is presented based on the results of simulation analysis of the PWR spectra.