A new scheme of hybridization based on the Au(nano)-DNA modified glassy carbon electrode

DNA hybridization on the Au(nano)-DNA modified glassy carbon electrode (GCE) was investigated. The thiol modified probe oligonucleotides (SH-ssDNA) at the 5' phosphate end were assembled on the Au(nano)-DNA modified GCE surface. The electrochemical response of the probe immobilization and hybridization with target DNA was measured by differential pulse voltammetry (DPV) using methylene blue (MB) as the electroactive indicator. Gold nanoparticles can be dispersed effectively on the GCE surface in the presence of calf thymus DNA. Au(nano)-DNA modified GCE could greatly increase the active sites and enhance the response signal during immobilization and hybridization. The hybridization amount of target DNA could be greatly increased. The linear detection range of Au(nano)-DNA electrode for the complementary 21-mer oligonucleotide (cDNA) was achieved from 1.52 x 10(-10) to 4.05 x 10(-8) mol L(-1). The detection limit could reach the concentration of 10(-10) mol/L.     

Covalent DNA immobilization on polymer-shielded silver-coated quartz crystal microbalance using photobiotin-based UV irradiation.

The use of a commercial, silver-coated quartz crystal microbalance (QCM) as a disposable, low-cost, and reliable DNA sensor is presented. This is an incorporation of polymer-based silver electrode shielding and photochemistry-based surface modification for covalent DNA immobilization. To prevent undesired oxidation, the silver electrodes are coated with thin polystyrene films. The polymer surfaces are then modified by a photoreactive biotin derivative (photobiotin) under UV irradiation. The resulting biotin residues on the polymer-shielded surface react with a tetrameric avidin. Consequently a biotin-labeled DNA probe can be immobilized through a biotin-avidin-biotin bridge. A 14-mer single-stranded biotin-DNA probe and a 70-mer single-stranded DNA fragment containing complementary or noncomplementary sequences are used as a model system for DNA hybridization assay on the proposed sensors. The shielding ability of the polystyrene coatings after photo irradiation is investigated. The DNA probe binding capacity, hybridization efficiency, and kinetics are also investigated.     

Optimization of DNA immobilization on gold electrodes for label-free detection by electrochemical impedance spectroscopy

The ability to immobilize DNA probes onto gold substrates at an optimum surface density is key in the development of a wide range of DNA biosensors. We present a method to accurately control probe DNA surface density by the simultaneous co-immobilization of thiol modified probes and mercaptohexanol. Probe surface density is controlled by the thiol molar ratio in solution, with a linear relationship between thiol molar ratio and probe density spanning (1-9) x10(12)/cm2. The probe surface density per microscopic surface area was determined using chronocoulometry, and a detailed analysis of the method presented. Using this sample preparation method, the effect of probe density and hybridization on the charge transfer resistance with the negatively charged ferri/ferrocyanide redox couple was determined. Above a threshold probe surface density of 2.5 x 10(12)/cm2, electrostatic repulsion from the negatively charged DNA modulates the charge transfer resistance, allowing hybridization to be detected. Below the threshold density no change in charge transfer resistance with probe density or with hybridization occurs. The probe surface density was optimized to obtain the maximum percentage change in charge transfer resistance with hybridization.     

Immobilization of homooligonucleotide probe layers onto Si/SiO(2) substrates: characterization by electrochemical impedance measurements and radiolabelling

Radiolabelling and electrochemical impedance measurements were used to characterize the immobilization of single stranded homooligonucleotides onto silica surfaces and their subsequent hybridization with complementary strands. The immobilization procedure consists of grafting an epoxysilane onto microelectronic grade Si/SiO(2) substrates, and coupling oligonucleotides bearing a hexylamine linker onto the epoxy moiety. Radiolabelling was used as a reference method to quantify the amount of immobilized and hybridized oligonucleotides. These results show that the Si/SiO(2) substrates modified with an epoxysilane yield a surface concentration of approximately 10(11) strands/cm(2) for the immobilized oligonucleotides, after vigorous washings, and that approximately 36% of these undergo hybridization with complementary strands. The impedance measurements, which provide a direct means of detecting variations in electrical charge accumulation across the semiconductor/oxide/electrolyte structure when the oxide surface is chemically modified, show that the semiconductor's flat band potential undergoes reproducible shifts of -150 and -100 mV following the immobilization and the hybridization step, respectively. These results demonstrate that electrochemical impedance measurements using chemically modified semiconductor/oxide/electrolyte structures of this type offer a viable alternative for the direct detection of complementary DNA strands upon hybridization.     

Enhancement of DNA immobilization and hybridization on gold electrode modified by nanogold aggregates

Gold electrodes modified by nanogold aggregates (nanogold electrode) were obtained by the electrodeposition of gold nanoparticles onto planar gold electrode. The Electrochemical response of single-stranded DNA (ssDNA) probe immobilization and hybridization with target DNA was measured by cyclic voltammograms (CV) using methylene blue (MB) as an electroactive indicator. An improving method using long sequence target DNA, which greatly enhanced the response signal during hybridization, was studied. Nanogold electrodes could largely increase the immobilization amount of ssDNA probe. The hybridization amount of target DNA could be increased several times for the manifold nanogold electrodes. The detection limit of nanogold electrode for the complementary 16-mer oligonucleotide (target DNA1) and long sequence 55-mer oligonucleotide (target DNA2) could reach the concentration of 10(-9) mol/L and 10(-11) mol/L, respectively, which are far more sensitive than that of the planar electrode.     

Cooperative lectin recognition of periodical glycoclusters along DNA duplexes: alternate hybridization and full hybridization

We describe herein the construction of periodically, spatially controlled glycoclusters along DNA duplexes and their cooperative lectin recognition. Site-specifically alpha-mannosylated oligodeoxynucleotide 20-mer (Man-ODN20) was synthesized via the phosphoramidite solid-phase synthesis. Alternate hybridization of the Man-ODN20 with the half-sliding complementary ODN 20-mer (hscODN20) gave an alternately prolonged Man-cluster Man-ODN20/hscODN20. The binding of the Man-cluster to FITC-labeled ConA lectin showed sigmoidal fluorescence dependency on the concentration of Man-ODN, indicating that some mannose residues along the repeating DNA duplex were cooperatively bound to ConA (apparent affinity constant: K(af)=2.4 x 10(4)M(-1) and Hill coefficient: n=3.5). The duplex of Man-ODN20 with full complementary ODN 20-mer (fcODN20) was little bound to ConA. The binding behavior of Man-ODN20/hscODN20 is compared with that of the alternately prolonged Gal-cluster Gal-ODN20/hscODN20 previously reported. Duplexes 20-mer, 40-mer, and 60-mer presenting one, two, and three periodic galactoses were also prepared by full hybridization of 20-mer beta-galactosylated oligodeoxynucleotide (Gal-ODN20) with the periodically repeating full complementary 20-mer, 40-mer, and 60-mer ODNs. RCA(120) lectin was found to little bind the 20-mer and 40-mer duplexes and to bind weakly and non-cooperatively the 60-mer duplex (K(af)=1.1 x 10(4)M(-1)). The cooperative lectin recognition of these glycoclusters in relation with the degree of association (DA) of ODN and the numbers of glycosides along the DNA duplex is discussed.     

DNA hybridization sensor utilizing [Os(5,6-dmphen)3]2+ by square wave voltammetry.

DNA hybridization detection utilizing [Os(5,6-dmphen)3]2+ (tris(5,6-dimethyl-phenanthroline) osmium(II/III)) as hybridization indicator was studied, because [Os(5,6-dmphen)3]2+ has the most largest association constant (K2+) and high current density in osmium methyl substituted phenanthroline complexes. As the result, target DNA could be detected selectively ranging from 6.9 x 10(-10) to 6.9 x 10(-5) g/mL using square wave voltammetry.     

Detection of DNA recognition events using multi-well field effect devices

We proposed the multi-well field effect device for detection of charged biomolecules and demonstrated the detection principle for DNA recognition events using quasi-static capacitance-voltage (QSCV) measurement. The multi-well field effect device is based on the electrostatic interaction between molecular charges induced by DNA recognition and surface electrons in silicon through the Si(3)N(4)/SiO(2) thin double-layer. Since DNA molecules and DNA binders such as Hoechst 33258 have intrinsic charges in aqueous solutions, respectively, the charge density changes due to DNA recognition events at the Si(3)N(4) surface were directly translated into electrical signal such as a flat band voltage change in the QSCV measurement. The average flat band shifts were 20.7 mV for hybridization and -13.5 mV for binding of Hoechst 33258. From the results of flat band voltage shifts due to hybridization and binding of Hoechst 33258, the immobilization density of oligonucleotide probes at the Si(3)N(4) surface was estimated to be 10(8) cm(-2). The platform based on the multi-well field effect device is suitable for a simple and arrayed detection system for DNA recognition events.     

Hybridization signal enhancement via long-stranded probe for detection of DNA using aquadichloro (benzimidazole)-copper(II) as hybridization indicator

A simple and sensitive method for electrochemical detection of DNA was designed. This DNA sensor was based on a "sandwich" detection strategy, which involved a long capture probe DNA immobilized on glassy carbon electrodes that flanked both the reference DNA and target DNA. Electrochemical signals were measured by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) using aquadichloro(benzimidazole)-copper(II), Cu(bzim)(H(2)O)Cl(2), as an electroactive indicator. An improving amount of Cu(bzim)(H(2)O)Cl(2) was interacted with the hybrid DNA via the incorporation of a long-probe DNA and a reference DNA in this sensor. As a result of this effect, this sensor design significantly enhanced the sensitivity. With 48-mer probe DNA and 27-mer reference DNA, the proposed method could be used for detection of 21-mer ssDNA ranging from 1.32 x 10(-7) to 2.52 x 10(-6) M with a detection limit of 2.94 x 10(-8) M. Electrochemical DNA biosensors were also developed using the same long-probe sequence as the target sequence with the novel hybridization indicator, Cu(bzim) (H(2)O)Cl(2). The detection limits for the complementary 21-mer target and 27-mer target were 9.52 x 10(-8) M and 5.81 x 10(-8) M, respectively. The results showed that the sensor with long-probe DNA and reference DNA is far more sensitive than that with nonswitch assay.     

Impact of spacers on the hybridization efficiency of mixed self-assembled DNA/alkanethiol films

The immobilization of DNA strands is an essential step in the development of any DNA biosensor. Self-assembled mixed DNA/alkanethiol films are often used for coupling DNA probes covalently to the sensor surface. Although this strategy is well accepted, the effect of introducing a spacer molecule to increase the distance between the specific DNA sequence and the surface has rarely been assessed. The major goal of this work was to evaluate a number of such spacers and to assess their impact on for example the sensitivity and the reproducibility. Besides the commonly used mercaptohexyl (C(6)) spacer, a longer mercapto-undecyl (C(11)) spacer was selected. The combination of both spacers with tri(ethylene)glycol (TEG) and hexa(ethylene)glycol (HEG) was studied as well. The effect of the different spacers on the immobilization degree as well as on the consecutive hybridization was studied using surface plasmon resonance (SPR). When using the longer C(11) spacer the mixed DNA/alkanethiol films were found to be more densely packed. Further hybridization studies have indicated that C(11) modified probes improve the sensitivity, the corresponding detection limit as well as the reproducibility. In addition two different immobilization pathways, i.e. flow vs. diffusion controlled, were compared with respect to the hybridization efficiency. These data suggest that a flow-assisted approach is beneficial for DNA immobilization and hybridization events. In conclusion, this work demonstrates the considerable impact of spacers on the biosensor performance but also shows the importance of a flow-assisted immobilization approach.     

Grating-based surface plasmon resonance detection of core-shell nanoparticle mediated DNA hybridization

In this report, we have investigated enhanced surface plasmon resonance (SPR) detection of DNA hybridization using gold core - silica shell nanoparticles in localized plasmonic fields. The plasmonic fields were localized by periodic linear gratings. Experimental results measured for hybridization of 24-mer single-stranded DNA oligomers suggest that core-shell nanoparticles (CSNPs) on gratings of 400 nm period provide enhanced optical signatures by 36 times over conventional thin film-based SPR detection. CSNP-mediated DNA hybridization produced 3 times larger angular shift compared to gold nanoparticles of the same core size. We have also analyzed the effect of structural variation. The enhancement using CSNPs was associated with increased surface area and index contrast that is combined by improved plasmon coupling with localized fields on gratings. The combined approach for conjugated measurement of a biomolecular interaction on grating structures is expected to lower the limit of detection to the order of a few tens of fg/mm(2).     

Immobilization and hybridization of DNA in a sugar polyacrylate hydrogel

Using a non-contact microarrayer, amine-terminated probe oligonucleotides representing 20-, 50-, and 70-mer fragments of the fliC gene were covalently coupled into three-dimensional regions in a "sugar polyacrylate" hydrogel based on poly(6-acryloyl-beta-O-methyl galactopyranoside-co-aminopropyl methacrylamide). The arrayer deposited the solution containing ssDNA probes in discrete regions on the surface of the gel (i.e. as a droplet with a ca. 450 microm diameter), allowing penetration and attachment of the ss DNA within the three dimensional region of the gel. The attachment was mediated by the homobifunctional crosslinker bis-succinimidyl suberate. Confocal microscopy showed the density of attached probe DNA was greatest in the interior-most regions of the gel volume. Target ssDNA (20- and 70-mer) was able to diffuse through the gel and undergo successful hybridization with the probes. For target ssDNA in the concentration range 0.19 microM to 6.0 microM, there was a linear correlation between DNA concentration and the fluorescence of the gel region where hybridization occurred.     

Estimation of bacterial cell numbers in humic acid-rich salt marsh sediments with probes directed to 16S ribosomal DNA

The feasibility of using probes directed towards ribosomal DNAs (rDNAs) as a quantitative approach to estimating cell numbers was examined and applied to study the structure of a bacterial community in humic acid-rich salt marsh sediments. Hybridizations were performed with membrane-bound nucleic acids by using seven group-specific DNA oligonucleotide probes complementary to 16S rRNA coding regions. These included a general eubacterial probe and probes encompassing most members of the gram-negative, mesophilic sulfate-reducing bacteria (SRB). DNA was extracted from sediment samples, and contaminating materials were removed by a series of steps. Efficiency of DNA extraction was 48% based on the recovery of tritiated plasmid DNA added to samples prior to extraction. Reproducibility of the extraction procedure was demonstrated by hybridizations to replicate samples. Numbers of target cells in samples were estimated by comparing the amount of hybridization to extracted DNA obtained with each probe to that obtained with a standard curve of genomic DNA for reference strains included on the same membrane. In June, numbers of SRB detected with an SRB-specific probe ranged from 6.0 x 10(7) to 2.5 x 10(9) (average, 1.1 x 10(9) +/- 5.2 x 10(8)) cells g of sediment-1. In September, numbers of SRB detected ranged from 5.4 x 10(8) to 7.3 x 10(9) (average, 2.5 x 10(9) +/- 1.5 x 10(9)) cells g of sediment-1. The capability of using rDNA probes to estimate cell numbers by hybridization to DNA extracted from complex matrices permits initiation of detailed studies on community composition and changes in communities based on cell numbers in formerly intractable environments.     

Brush effects on DNA chips: thermodynamics, kinetics, and design guidelines

In biology experiments, oligonucleotide microarrays are contacted with a solution of long nucleic acid targets. The hybridized probes thus carry long tails. When the surface density of the oligonucleotide probes is high enough, the progress of hybridization gives rise to a polyelectrolyte brush due to mutual crowding of the nucleic acid tails. The free-energy penalty associated with the brush modifies both the hybridization isotherms and the rate equations: the attainable hybridization is lowered significantly as is the hybridization rate. When the equilibrium hybridization fraction, x(eq), is low, the hybridization follows a Langmuir type isotherm, x(eq)/(1 - x(eq)) = c(t)K where c(t) is the target concentration and K is the equilibrium constant. K is smaller than its bulk value by a factor (n/N)(2/5) due to wall effects where n and N denote the number of bases in the probe and the target. At higher x(eq), when the brush is formed, the leading correction is x(eq)/(1 - x(eq)) = c(t)K exp - const'x(eq)(2/3) - x(B)(2/3) where x(B) corresponds to the onset of the brush regime. The denaturation rate constant in the two regimes is identical. However, the hybridization rate constant in the brush regime is lower, the leading correction being exp -const' x(2/3) - x(B)(2/3).     

Human adenovirus proteinase: DNA binding and stimulation of proteinase activity by DNA.

The interaction of the human adenovirus proteinase (AVP) with various DNAs was characterized. AVP requires two cofactors for maximal activity, the 11-amino acid residue peptide from the C-terminus of adenovirus precursor protein pVI (pVIc) and the viral DNA. DNA binding was monitored by changes in enzyme activity or by fluorescence anisotropy. The equilibrium dissociation constants for the binding of AVP and AVP-pVIc complexes to 12-mer double-stranded (ds) DNA were 63 and 2.9 nM, respectively. DNA binding was not sequence specific; the stoichiometry of binding was proportional to the length of the DNA. Three molecules of the AVP-pVIc complex bound to 18-mer dsDNA and six molecules to 36-mer dsDNA. When AVP-pVIc complexes bound to 12-mer dsDNA, two sodium ions were displaced from the DNA. A Delta of -4.6 kcal for the nonelectrostatic free energy of binding indicated that a substantial component of the binding free energy results from nonspecific interactions between the AVP-pVIc complex and DNA. The cofactors altered the interaction of the enzyme with the fluorogenic substrate (Leu-Arg-Gly-Gly-NH)2-rhodamine. In the absence of any cofactor, the Km was 94.8 microM and the kcat was 0.002 s(-1). In the presence of adenovirus DNA, the Km decreased 10-fold and the kcat increased 11-fold. In the presence of pVIc, the Km decreased 10-fold and the kcat increased 118-fold. With both cofactors present, the kcat/Km ratio increased 34000-fold, compared to that with AVP alone. Binding to DNA was coincident with stimulation of proteinase activity by DNA. Although other proteinases have been shown to bind to DNA, stimulation of proteinase activity by DNA is unprecedented. A model is presented suggesting that AVP moves along the viral DNA looking for precursor protein cleavage sites much like RNA polymerase moves along DNA looking for a promoter.     

A method for DNA sequencing by hybridization with oligonucleotide matrix.

A new technique of DNA sequencing by hybridization with oligonucleotide matrix (SHOM) which could also be applied for DNA mapping and fingerprinting, mutant diagnostics, etc., has been tested in model experiments. A dot matrix was prepared which contained 9 overlapping octanucleotides (8-mers) complementary to a common 17-mer. Each of the 8-mers was immobilized as individual dot in thin layer of polyacrylamide gel fixed on a glass plate. The matrix was hybridized with the 32P-labeled 17-mer and three other 17-mers differing from the first one by a single base change. The hybridization enabled us to distinguish perfect duplexes from those containing mismatches in 32 out of 35 cases. These results are discussed with respect to the applicability of the approach for sequencing. It was shown that hybridization of DNA with an immobilized 8-mer in the presence of a labeled 5-mer led to the formation of a stable duplex with the 5-mer only if the 5- and the 8-mers were in continuous stacking making a perfect nicked duplex 13 (5+8) base pairs long. These experiments and computer simulations suggest that continuous stacking hybridization may increase the efficiency of sequencing so that random or natural coding DNA fragments about 1000 bases long could be sequenced in more than 97% of cases. Miniaturized matrices or sequencing chips were designed, where oligonucleotides were immobilized within 100 x 100 micron dots disposed at 100 micron intervals. Hybridization of fluorescently labeled DNA fragments with microchips may simplify sequencing and ensure sensitivity of at least 10 attomoles per dot. The perspectives and limitations of SHOM are discussed.     

Introduction of hematoxylin as an electroactive label for DNA biosensors and its employment in detection of target DNA sequence and single-base mismatch in human papilloma virus corresponding to oligonucleotide

For the detection of DNA hybridization, a new electrochemical biosensor was developed on the basis of the interaction of hematoxylin with 20-mer deoxyoligonucleotides (from human papilloma virus, HPV). The study was performed based on the interaction of hematoxylin with an alkanethiol DNA probe self-assembled gold electrode (ss-DNA/AuE) and its hybridization form (ds-DNA/AuE). The optimum conditions were found for the immobilization of HPV probe on the gold electrode (AuE) surface and its hybridization with the target DNA. Electrochemical detection of the self-assembled DNA and the hybridization process were performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the accumulated hematoxylin at the modified electrode was electroactive. Observing a remarkable difference between the voltammetric signals of the hematoxylin obtained from different hybridization samples (non-complementary, mismatch and complementary DNAs), we confirmed the potential of the developed biosensor in detecting and discriminating the target complementary DNA from non-complementary and mismatch oligonucleotides. Under optimum conditions, the electrochemical signal had a linear relationship with the concentration of the target DNA ranging from 12.5 nM to 350.0 nM, and the detection limit was 3.8 nM.     

Dietary trans-vaccenic acid (trans11-18:1) increases concentration of cis9,transll-conjugated linoleic acid (rumenic acid) in tissues of lactating mice and suckling pups

Lactating mice were fed trans-vaccenic acid (trans 11-18:1, TVA) to assess desaturation of TVA to cis9,trans11-conjugated linoleic acid (9/11CLA). Diets contained 30 g x kg(-1) 18:2n-6 (LA) or 20 g LA plus 10 g 18:0 (SA), TVA, or a CLA mixture (MCLA). Compared with SA, feeding TVA increased 9/11CLA concentrations in blood plasma phospholipid, triglyceride, and free fatty acid fractions. However, concentrations of 9/11CLA in plasma fractions were greater when MCLA was fed compared with SA or TVA. No 9/11CLA was detected in liver of mice fed SA, and it was only 1 mg x g(-1) of total fatty acids in the carcass. In contrast, 9/11CLA content of liver (5 mg x g(-1)) and carcass (6 mg x g(-1)) of mice fed TVA was similar to liver (5 mg x g(-1)) and carcass (7 mg x g(-1)) of mice fed MCLA. Mammary tissue of SA-fed mice had no detectable 9/11 CLA, compared with 5 or 14 mg x g(-1) for TVA or MCLA-fed mice. Stearoyl-CoA desaturase activity in mammary tissue from TVA-fed dams was 14% greater compared with SA. Activity of this enzyme in liver tissue was similar among treatments. In pups nursing TVA-fed dams, 9/1 ICLA accounted for 3 mg x g(-1) in liver but no 9/11CLA was detected in the carcass. In pups nursing MCLA-fed dams, however, 9/11CLA accounted for 8 and 6 mg x g(-1) in liver and carcass. Results indicated TVA desaturation enhanced 9/11CLA in tissues and milk fat.     

C8-guanine adduct-induced stabilization of a -1 frame shift intermediate in a nonrepetitive DNA sequence.

The mechanism of frame shift mutagenesis induced by N-(deoxyguanosin-8-yl)-1-aminopyrene, the major DNA adduct formed by the carcinogen 1-nitropyrene, was investigated by thermal melting studies of a 13-mer in which the adduct was flanked by a 5' and a 3' C. Compared to the unmodified 13-mer, the adduct destabilized the duplex by 4-5 kcal/mol, and the DeltaDeltaG value remained approximately the same regardless of which base was placed opposite the adduct. In contrast, deletion of the base opposite the adduct stabilized the duplex by nearly 4 kcal/mol. The adduct in the same sequence context was inserted into a bacteriophage M13 DNA containing the simian virus 40 origin of replication. The constructed DNA template was replicated in vitro with extracts from normal human fibroblasts. The adduct was not removed from the progeny DNA following bidirectional semiconservative replication, which suggests that it had been bypassed, rather than repaired, by the cell extract. When newly replicated bacteriophage was evaluated for mutations in the region of the modified G, most contained a G at the adduct site, indicating error-free replication. A small number of mutants ( approximately 2 x 10(-3)) were detected, all of which contained a targeted G.C base pair deletion. This suggests a relationship between the thermodynamic stability of the adduct in DNA and the errors that occurred during replicative bypass by the human DNA polymerases.