Tailored poly(2-oxazoline) polymer brushes to control protein adsorption and cell adhesion

POx bottle-brush brushes (BBBs) are synthesized by SIPGP of 2-isopropenyl-2-oxazoline and consecutive LCROP of 2-oxazolines on 3-aminopropyltrimethoxysilane-modified silicon substrates. The side chain hydrophilicity and polarity are varied. The impact of the chemical composition and architecture of the BBB upon protein (fibronectin) adsorption and endothelial cell adhesion are investigated and prove extremely low protein adsorption and cell adhesion on BBBs with hydrophilic side chains such as poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline). The influence of the POx side chain terminal function upon adsorption and adhesion is minor but the side chain length has a significant effect on bioadsorption.     

Terminally functionalized thermoresponsive polymer brushes for simultaneously promoting cell adhesion and cell sheet harvest

For preparing cell sheets effectively for cell sheet-based regenerative medicine, cell-adhesion strength to thermoresponsive cell culture surfaces need to be controlled precisely. To design new thermoresponsive surfaces via a terminal modification method, thermoresponsive polymer brush surfaces were fabricated through the surface-initiated reversible addition-fragmentation chain transfer (RAFT) radical polymerization of N-isopropylacrylamide (IPAAm) on glass substrates. The RAFT-mediated grafting method gave dithiobenzoate (DTB) groups to grafted PIPAAm termini, which can be converted to various functional groups. In this study, the terminal carboxylation of PIPAAm chains provided high cell adhesive property to thermoresponsive surfaces. Although cell adhesion is generally promoted by a decrease in the grafted PIPAAm amount, the decrease also decelerated thermally-induced cell detachment, whereas the influence of terminal modification was negligible on the cell detachment. Consequently, the terminally modified PIPAAm brush surfaces allowed smooth muscle cells (SMCs) to simultaneously adhere strongly and detach themselves rapidly. In this study, SMCs were unable to reach a confluent monolayer on as-prepared PIPAAm brush surfaces (grafted amount: 0.41 μg/cm(2)) without terminal carboxylation due to their insufficient cell-adhesion strength. On the other hand, though a decrease in the PIPAAm amount allowed SMCs to form a confluent cell monolayer on the PIPAAm brush surface, the SMCs were unable to be harvested as a monolithic cell sheet by low-temperature culture at 20 °C. Because of their unique property, only terminal-carboxylated PIPAAm brush surfaces achieved rapid harvesting of complete cell sheets by low-temperature culturing.     

Micropatterning of polymer brushes: grafting from dewetting polymer films for biological applications

In this novel platform, a micropatterned polymer brush was obtained by grafting poly(poly(ethylene glycol) methyl ether methacrylate) (poly(PEGMA)) from a thin macroinitiator film using atom transfer radical polymerization (ATRP). A pattern of holes was formed in the macroinitiator film by taking advantage of its spontaneous dewetting above the glass transition temperature from a bottom polystyrene film, driven by unfavorable intermolecular forces. Patterning by dewetting can be achieved at length-scales from a few hundred nanometers to several tens of micrometers, by simply thermally annealing the bilayer above the glass transition temperature of the polymer. This approach is substrate-independent, as polymer films can be cast onto surfaces of different size, shape, or material. As a demonstration of its potential, proteins, and individual cells were attached on targeted bioadhesive polystyrene areas of the micropatterns within poly(PEGMA) protein-repellent brushes. We anticipate this approach will be suitable for the patterning of brushes, especially for biomedical applications such as in the study of single cells and of cell cocultures.     

Electrochemical deposition and surface-initiated RAFT polymerization: protein and cell-resistant PPEGMEMA polymer brushes

This paper introduces a novel and versatile method of grafting protein and cell-resistant poly(poly ethylene glycol methyl ether methacrylate) (PPEGMEMA) brushes on conducting Au surface. The process started with the electrochemical deposition and full characterization of an electro-active chain transfer agent (CTA) on the Au surface. The electrochemical behavior of the CTA was investigated by cyclic voltammetry (CV) while the deposition and stability of the CTA on the surface were confirmed by ellipsometry, contact angle, and X-ray photoelectron spectroscopy (XPS). The capability of the electrodeposited CTA to mediate surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization on both the polymethyl methacrylate (PMMA; model polymer) and PPEGMEMA brushes was demonstrated by the increase in thicknesses of the films after polymerization. Contact angles also decreased with the incorporation of the more hydrophilic brushes. Significant changes in the morphologies of the films before and after polymerization were also observed with atomic force microscopy (AFM) analyses. Furthermore, XPS results showed an increase in the O 1s peak intensity relative to C 1s after polymerizations, which confirmed the grafting of polyethyleneglycol (PEG) bearing brushes. The ability of the PPEGMEMA-modified Au surface to resist nonspecific adhesion of proteins and cells was monitored and confirmed by XPS, ellipsometry, contact angle, AFM, and fluorescence imaging. The new method presented has potential application as robust protein and cell-resistant coatings for electrically conducting electrodes and biomedical devices.     

Charged hydrophilic polymer brushes and their relevance for understanding marine biofouling

The resistance of charged polymers to biofouling was investigated by subjecting cationic (PDMAEMA), anionic (PSPMA), neutral (PHEMA-co-PEG₁₀MA), and zwitterionic (PSBMA) brushes to assays testing protein adsorption; attachment of the marine bacterium Cobetia marina; settlement and adhesion strength of zoospores of the green alga Ulva linza; settlement of barnacle (Balanus amphitrite and B. improvisus) cypris larvae; and field immersion tests. Several results go beyond the expected dependence on direct electrostatic attraction; PSPMA showed good resistance towards attachment of C. marina, low settlement and adhesion of U. linza zoospores, and significantly lower biofouling than on PHEMA-co-PEG₁₀MA or PSBMA after a field test for one week. PDMAEMA showed potential as a contact-active anti-algal coating due to its capacity to damage attached spores. However, after field testing for eight weeks, there were no significant differences in biofouling coverage among the surfaces. While charged polymers are unsuitable as antifouling coatings in the natural environment, they provide valuable insights into fouling processes, and are relevant for studies due to charging of nominally neutral surfaces.     

Characterization of biomimetic surfaces formed from cell membranes

A method for fabricating biomimetic surfaces from intact cell membranes is described. A monolayer of alkanethiol on gold is covered by a second layer derived from the components of erythrocyte membranes either by self-assembly or by Langmuir-Blodgett methods. The resulting asymmetric hybrid layer was characterized by ellipsometry, surface plasmon resonance (SPR), contact angle, capacitance, voltammetry, and electron and atomic force microscopy. The erythrocyte membrane layer was measured to be approximately 30-40 A in thickness. Using SPR, the presence of erythrocyte components on the surface was demonstrated by their selective removal by enzymatic action. The uniform deposition of membranous material on the substrate was shown by electron and atomic force microscopy. Demonstration of acetylcholinesterase (AChase) activity, a membrane-anchored enzyme, on the surface for at least 8 days, suggests that the outer leaflet of the erythrocyte membrane is present in its native form. Cyclic voltammetry demonstrates that enhanced electron transport from a solution redox species accompanies formation of the erythrocyte layer at the surface. This enhanced electron transport is blocked by 4,4'-diisothiocyanate stilbene-2,2'-disulfonic acid, a well known blocker of anion transport, suggesting that an erythrocyte anion transporter protein is incorporated into the surface layer in an active conformation.     

Artificial cilia of magnetically tagged polymer nanowires for biomimetic mechanosensing

Polymeric nanowires of polypyrrole have been implemented as artificial cilia on giant-magneto-resistive multilayer sensors for a biomimetic sensing approach. The arrays were tagged with a magnetic material, the stray field of which changes relative to the underlying sensor as a consequence of mechanical stimuli which are delivered by a piezoactuator. The principle resembles balance sensing in mammals. Measurements of the sensor output voltage suggest a proof of concept at frequencies of around 190 kHz and a tag thickness of ～300 nm. Characterization was performed by scanning electron microscopy and magnetic force microscopy. Micromagnetic and finite-element simulations were conducted to assess basic sensing aspects.     

Selective cell attachment to a biomimetic polymer surface through the recognition of cell-surface tags

Reactive phosphorylcholine polymers, which can recognize biosynthetic cell-surface tags, were synthesized to control cell attachment. Human promyelocytic leukemia cells (HL-60) with unnatural carbohydrates as cell-surface tags were harvested by treatment with N-levulinoylmannosamine (ManLev). The attachment of ManLev-treated HL-60 cells to 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers with hydrazide groups was studied. HL-60 cells, which are nonadhesive, did not attach to any polymer surface without ManLev treatment. In contrast, ManLev-treated HL-60 cells attached to a poly[MPC-co-n-butyl methacrylate (BMA)-co-methacryloyl hydrazide (MH)] (PMBH) surface following 15 min of incubation. The cells that attached to the PMBH surface retained their native morphology and viability for 24 h of incubation. On the other hand, approximately half of the HL-60 cells that attached to the poly(BMA-co-MH) (PBH) surface died. These results suggest that MH units in the polymer act as anchors for cell attachment and MPC units help to preserve cell viability on a polymer surface. The coculture of ManLev-treated HL-60 and fluorescence-stained human uterine cervical cancer cells (HeLa) was carried out on polymer surfaces. ManLev-treated HL-60 cells specifically attached to the PMBH surface. In contrast, both HL-60 and HeLa cells were observed on the PBH surface. The control of cellular interactions with synthetic polymers may be useful for the future development of cell-integrated biosensors and biomedical devices.     

Sacrificial bonds in polymer brushes from rat tail tendon functioning as nanoscale velcro

Polymers play an important role in many biological systems, so a fundamental understanding of their cross-links is crucial not only for the development of medicines but also for the development of biomimetic materials. The biomechanical movements of all mammals are aided by tendon fibrils. The self-organization and biomechanical functions of tendon fibrils are determined by the properties of the cross-links between their individual molecules and the interactions among the cross-links. The cross-links of collagen and proteoglycan molecules are particularly important in tendons and, perhaps, bone. To probe cross-links between tendon molecules, we used the cantilever tip of an atomic force microscope in a pulling setup. Applying higher forces to rat tail tendon molecules with the tip led to a local disruption of the highly organized shell of tendon fibrils and to the formation or an increase of a polymer brush of molecules sticking out of the surface. The cross-linking between these molecules was influenced by divalent Ca2+ ions. Furthermore, the molecules of the polymer brush seemed to bind back to the fibrils in several minutes. We propose that sacrificial bonds significantly influence the tendon fibrils' self-organization and self-healing and therefore contribute to toughness and strength.     

Spatially well-defined binary brushes of poly(ethylene glycol)s for micropatterning of active proteins on anti-fouling surfaces

We report a novel method for micropatterning of active proteins on anti-fouling surfaces via spatially well-defined and dense binary poly(ethylene glycol)s (PEGs) brushes with controllable protein-docking sites. Binary brushes of poly(poly(ethylene glycol) methacrylate-co-poly(ethylene glycol)methyl ether methacrylate), or P(PEGMA-co-PEGMEMA), and poly(poly(ethylene glycol)methyl ether methacrylate), or P(PEGMEMA), were prepared via consecutive surface-initiated atom transfer radical polymerizations (SI-ATRPs) from a resist-micropatterned Si(100) wafer surface. The terminal hydroxyl groups on the side chains of PEGMA units in the P(PEGMA-co-PEGMEMA) microdomains were activated directly by 1,1'-carbonyldiimidazole (CDI) for the covalent coupling of human immunoglobulin (IgG) (as a model active protein). The resulting IgG-coupled PEG microdomains interact only and specifically with target anti-IgG, while the other PEG microregions effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored.     

Interaction of sugars, polysaccharides and cells with boronate-containing copolymers: from solution to polymer brushes

Interaction of mono- and disaccharides, polysaccharide particles and yeast cells with boronate-containing copolymers (BCC) of N-acryloyl-m-aminophenylboronic acid (NAAPBA) with N,N-dimethylacrylamide (DMAA) or N-isopropylacrylamide (NIPAM) was studied. The binding of saccharides to BCC of NIPAM resulted in a shift of its phase transition temperature (DeltaTP), which provided a quantitative measure for the complex formation. Among the sugars typical of non-reducing ends of glycoproteins the DeltaTP decreased in the order: N-acetylneuraminic acid > xylose approximately galactose > mannose approximately fucose > N-acetylglucosamine. Strong specific adsorption of the BCC on the cross-linked agarose gel Sepharose CL-6B (15-30 mg/ml gel at pH 9.2) was registered. The copolymers adsorption was due to boronate-sugar interactions and decreased with pH. Multivalent interaction of the BCC with the agarose gel has been proven by liquid column chromatography exhibiting a weak reversible adsorption of NAAPBA and almost irreversible adsorption of DMAA-NAAPBA copolymer from 0.1 M sodium phosphate buffer, pH 7.9. The two studied BCCs could be completely desorbed from the gel by 0.1 M fructose in aqueous buffered media with pH from 7.5 to 9.2. In turn, the agarose particles and yeast cells were found to adhere to siliceous supports end-grafted with boronate-BCC of N,N-dimethylacrylamide at pH > or = 7.5, due to the actions. Quantitative detachment of adhered particles or cells could be attained by addition of 20 mM or 100 mM fructose, respectively, in the pH range from 7.5 to 9.2. Affinity adhesion of micron-size carbohydrate particles to boronate-containing polymer brushes fixed on solid supports was considered as a model system suggesting a new approach to isolation and separation of living cells.     

Surface hydrophilic modification with well-defined glycopolymer for protein imprinting matrix

Well-defined lactose-containing glycopolymer has been synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with (4-cyanopentanoic acid)-4- dithiobenozoate (CAD) as chain transfer agent. The glycopolymer was introduced onto the exterior surfaces of the bovine serum albumin (BSA) imprinted polymer beads by grafting copolymerization with methyl methacrylate and ethylene glycol dimethacrylate. After alcoholysis, the hydrophilic lactose residues of glycopolymer will stretched on the surface of the MIP beads and then the hydrophilicity of the surface will be enhanced. Rebinding test shows that the glycopolymer hydrophilic modified BSA imprinted polymer presents higher performance selectivity than that of unmodified one, which means that the hydrophobic-hydrophilic balance of the imprinted polymer surface is in favor of the improvement of specific recognition property of the material.     

Controlled/living surface-initiated ATRP of antifouling polymer brushes from gold in PBS and blood sera as a model study for polymer modifications in complex biological media

The use of PBS, 10% FBS or 10% CS as media for SI-ATRP is reported. Controlled/living SI-ATRP of MeOEGMA in PBS is achieved leading to better control than in water. The livingness is confirmed by chain extension with MeOEGMA or carboxybetaine acrylamide. This technique is successfully adopted for the polymerization of MeOEGMA in 10% FBS or CS as models for complex biological media with reasonable control of the brush growth. All prepared brushes show excellent antifouling properties.     

Surface interaction forces of cellulose nanocrystals grafted with thermoresponsive polymer brushes

The colloidal stability and thermoresponsive behavior of poly(N-isopropylacrylamide) brushes grafted from cellulose nanocrystals (CNCs) of varying graft densities and molecular weights was investigated. Indication of the grafted polymer brushes was obtained after AFM imaging of CNCs adsorbed on silica. Also, aggregation of the nanoparticles carrying grafts of high degree of polymerization was observed. The responsiveness of grafted CNCs in aqueous dispersions and as an ultrathin film was evaluated by using light scattering, viscosimetry, and colloidal probe microscopy (CPM). Light transmittance measurements showed temperature-dependent aggregation originating from the different graft densities and molecular weights. The lower critical solution temperature (LCST) of grafted poly(NiPAAm) brushes was found to decrease with the ionic strength, as is the case for free poly(NiPAAm) in aqueous solution. Thermal responsive behavior of grafted CNCs in aqueous dispersions was observed by a sharp increase in dispersion viscosity as the temperature approached the LCST. CPM in liquid media for asymmetric systems consisting of ultrathin films of CNCs and a colloidal silica probe showed the distinctive effects of the grafted polymer brushes on interaction and adhesive forces. The origin of such forces was found to be mainly electrostatic and steric in the case of bare and grafted CNCs, respectively. A decrease in the onset of attractive and adhesion forces of grafted CNCs films were observed with the ionic strength of the aqueous solution. The decreased mobility of polymer brushes upon partial collapse and decreased availability of hydrogen bonding sites with higher electrolyte concentration were hypothesized as the main reasons for the less prominent polymer bridging between interacting surfaces.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N'-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2?h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24?h exposure) and cyprid settlement (24 and 48?h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Self-assembled monolayers and polymer brushes in biotechnology: current applications and future perspectives

The chemistry and topography of a surface affect biological response and are of fundamental importance, especially when living systems encounter synthetic surfaces. Most biomolecules have immense recognition power (specific binding) and simultaneously have a tendency to physically adsorb onto a solid substrate without specific receptor recognition (nonspecific adsorption). Therefore, to create useful materials for many biotechnology applications, interfaces are required that have both enhanced specific binding and reduced nonspecific binding. Thus, in applications such as sensors, the tailoring of surface chemistry and the use of micro or nanofabrication techniques becomes an important avenue for the production of surfaces with specific binding properties and minimal background interference. Both self-assembled monolayers (SAMs) and polymer brushes have attracted considerable attention as surface-active materials. In this review, we discuss both of these materials with their potential applications in biotechnology. We also summarize lithographic methods for pattern formation using combined top-down and bottom-up approaches and briefly discuss the future of these materials by describing emerging new applications.     

Impact of cell disruption and polymer recycling upon aqueous two-phase processes for protein recovery

A practical study is presented of the influence of cell debris and polymer recycling upon the operation of two-stage acqueous two-phase systems (ATPS) for the recovery of yeast bulk protein, pyruvate kinase and fumarase. Brewers' yeast was disrupted using one of two types of high-pressure homogenisers or a bead mill. The different cell debris suspensions were partitioned in a single PEG-phosphate ATPS extraction and the efficiency of solid-liquid separation was examined. A continuously operated two-stage ATPS process, using spray columns, is presented and practical problems of polymer recycling are discussed. Conclusions are drawn concerning the generic implementation and operational stability of ATPS in practical protein recoveries.