Microtubule-associated protein 1S, a short and ubiquitously expressed member of the microtubule-associated protein 1 family

The related high molecular mass microtubule-associated proteins (MAPs) MAP1A and MAP1B are predominantly expressed in the nervous system and are involved in axon guidance and synaptic function. MAP1B is implicated in fragile X mental retardation, giant axonal neuropathy, and ataxia type 1. We report the functional characterization of a novel member of the microtubule-associated protein 1 family, which we termed MAP1S (corresponding to sequence data bank entries for VCY2IP1 and C19ORF5). MAP1S contains the three hallmark domains of the microtubule-associated protein 1 family but hardly any additional sequences. It decorates neuronal microtubules and copurifies with tubulin from brain. MAP1S is synthesized as a precursor protein that is partially cleaved into heavy and light chains in a tissue-specific manner. Heavy and light chains interact to form the MAP1S complex. The light chain binds, bundles, and stabilizes microtubules and binds to actin. The heavy chain appears to regulate light chain activity. In contrast to MAP1A and MAP1B, MAP1S is expressed in a wide range of tissues in addition to neurons and represents the non-neuronal counterpart of this cytolinker family.     

Heterotypic complex formation between subunits of microtubule-associated proteins 1A and 1B is due to interaction of conserved domains

The microtubule-associated proteins MAP1A and MAP1B are related but distinct multi-subunit protein complexes that consist of heavy and light chains. The predominant forms of these complexes are homotypic, i.e. they consist of a MAP1A heavy chain associated with MAP1A light chains or a MAP1B heavy chain associated with MAP1B light chains, respectively. In addition, MAP1A and MAP1B can exchange subunits and form heterotypic complexes consisting of a MAP1A heavy chain associated with MAP1B light chains which might play a role in a transition period of neuronal differentiation. Here we extend previous findings by confirming that heterotypic MAP1B heavy chain-MAP1A light chain complexes also exist in the developing murine brain. We show that these complexes form through interaction of homologous domains conserved in heavy and light chains of MAP1A and MAP1B. Likewise, conserved domains of the MAP1A and MAP1B light chains account for formation of light chain heterodimers. By yeast 2-hybrid analysis we located the light chain binding domain on the heavy chain to amino acids 211-508, thereby defining a new functional subdomain.     

The functional cooperation of MAP1A heavy chain and light chain 2 in the binding of microtubules

Microtubule-associated protein 1A (MAP1A) is a high-molecular-weight protein that is comprised of a heavy chain and a light chain (LC2) and is widely distributed along the microtubules in both mature neurons and glial cells. To illustrate the interaction among the MAP1A heavy chain, light chain, and microtubule, we prepared DNA constructs with Myc-, EGFP-, or DsRed-tags for full-length MAP1A DNA expressing whole MAP1A protein, two domains of MAP1A heavy chain, and light chain. Distribution patterns of various MAP1A domains as well as their interactions with microtubules were monitored in a non-neuronal COS7 and a neuronal Neuro2A cells. Our data revealed that a complete MAP1A protein, which contains both heavy chain and LC2, could be colocalized with microtubule networks not only in Neuro2A cells but also in transfected COS7 cells. Filamentous structures failed to be visualized along microtubules in COS7 cells transfected with MAP1A heavy chain or LC2 alone. Whereas, after introducing MAP1A heavy chain with LC2 into COS7 cells, both heavy chain and LC2 could be colocalized with microtubules. From our functional analysis, both MAP1A and its LC2 could protect microtubules against the challenge of nacodazol. Data collected from yeast two-hybrid assays of various MAP1A domains confirmed that the interaction of LC2 and NH2-terminal of MAP1A heavy chain is important for microtubule binding. From our analysis of MAP1A functional domains, we suggest that interactions between MAP1A heavy chain and LC2 are critical for the binding of microtubules.     

MAP1B is encoded as a polyprotein that is processed to form a complex N-terminal microtubule-binding domain.

Microtubule-associated protein 1B (MAP1B), an abundant developmentally regulated neuronal protein, is a stoichiometric complex of a heavy chain and two light chains (light chain 1 and light chain 3). We find that light chain 1 is encoded within the 3' end of a previously reported MAP1B heavy chain cDNA. Amino acid sequencing, epitope mapping, Northern blotting, and Southern blotting indicate that the light chain and heavy chain are encoded by the same mRNA within the same open reading frame. In addition, amino acid sequencing of a 120 kd microtubule-binding and light chain-binding fragment of the heavy chain reveals that light chain 1 binds near the heavy chain N-terminus. Together these data indicate that the heavy chain and light chain 1 are produced by proteolytic processing of a MAP1B polyprotein and form a complex microtubule-binding domain.     

Identification of a 34-kD polypeptide as a light chain of microtubule- associated protein-1 (MAP-1) and its association with a MAP-1 peptide that binds to microtubules

We examined the association of a 34-kD light chain component to the heavy chains of MAP-1 using a monoclonal antibody that specifically binds the 34-kD component and labels neuronal microtubules in a specific and saturable manner. Immunoprecipitation of MAP-1 heavy chains together with the 34-kD component by the antibody indicates that the 34-kD polypeptide forms a complex with MAP-1 heavy chains. Both major isoforms of MAP-1 heavy chains (MAP-1A and MAP-1B) were found in the immunoprecipitate. Digestion of MAP-1 with alpha-chymotrypsin and analysis of the chymotryptic peptides reveals a 120-kD fragment of the MAP-1 heavy chain that binds to microtubules and is precipitable with the 34-kD light chain antibody, suggesting that the 34-kD light chain also binds to this domain of the molecule. Since microtubules that contain the 120-kD fragment lack the long lateral projections characteristic of microtubules with intact MAP-1, the 34-kD light chains may be localized at or near the microtubule surface.     

BiP and Immunoglobulin Light Chain Cooperate to Control the Folding of Heavy Chain and Ensure the Fidelity of Immunoglobulin Assembly

The immunoglobulin (Ig) molecule is composed of two identical heavy chains and two identical light chains (H2L2). Transport of this heteromeric complex is dependent on the correct assembly of the component parts, which is controlled, in part, by the association of incompletely assembled Ig heavy chains with the endoplasmic reticulum (ER) chaperone, BiP. Although other heavy chain-constant domains interact transiently with BiP, in the absence of light chain synthesis, BiP binds stably to the first constant domain (CH1) of the heavy chain, causing it to be retained in the ER. Using a simplified two-domain Ig heavy chain (VH-CH1), we have determined why BiP remains bound to free heavy chains and how light chains facilitate their transport. We found that in the absence of light chain expression, the CH1 domain neither folds nor forms its intradomain disulfide bond and therefore remains a substrate for BiP. In vivo, light chains are required to facilitate both the folding of the CH1 domain and the release of BiP. In contrast, the addition of ATP to isolated BiP-heavy chain complexes in vitro causes the release of BiP and allows the CH1 domain to fold in the absence of light chains. Therefore, light chains are not intrinsically essential for CH1 domain folding, but play a critical role in removing BiP from the CH1 domain, thereby allowing it to fold and Ig assembly to proceed. These data suggest that the assembly of multimeric protein complexes in the ER is not strictly dependent on the proper folding of individual subunits; rather, assembly can drive the complete folding of protein subunits.     

Structural Basis for the Association of MAP6 Protein with Microtubules and Its Regulation by Calmodulin

Microtubules are highly dynamic αβ-tubulin polymers. In vitro and in living cells, microtubules are most often cold- and nocodazole-sensitive. When present, the MAP6/STOP family of proteins protects microtubules from cold- and nocodazole-induced depolymerization but the molecular and structure determinants by which these proteins stabilize microtubules remain under debate. We show here that a short protein fragment from MAP6-N, which encompasses its Mn1 and Mn2 modules (MAP6(90–177)), recapitulates the function of the full-length MAP6-N protein toward microtubules, i.e. its ability to stabilize microtubules in vitro and in cultured cells in ice-cold conditions or in the presence of nocodazole. We further show for the first time, using biochemical assays and NMR spectroscopy, that these effects result from the binding of MAP6(90–177) to microtubules with a 1:1 MAP6(90–177):tubulin heterodimer stoichiometry. NMR data demonstrate that the binding of MAP6(90–177) to microtubules involve its two Mn modules but that a single one is also able to interact with microtubules in a closely similar manner. This suggests that the Mn modules represent each a full microtubule binding domain and that MAP6 proteins may stabilize microtubules by bridging tubulin heterodimers from adjacent protofilaments or within a protofilament. Finally, we demonstrate that Ca²⁺-calmodulin competes with microtubules for MAP6(90–177) binding and that the binding mode of MAP6(90–177) to microtubules and Ca²⁺-calmodulin involves a common stretch of amino acid residues on the MAP6(90–177) side. This result accounts for the regulation of microtubule stability in cold condition by Ca²⁺-calmodulin.     

Light chains of sea urchin kinesin identified by immunoadsorption

Previous studies with monoclonal antibodies indicate that sea urchin kinesin contains two heavy chains arranged in parallel such that their N-terminal ends fold into globular mechanochemical heads attached to a thin stalk ending in a bipartite tail [Scholey et al., 1989]. In the present, complementary study, we have used the monoclonal antikinesin, SUK4, to probe the quaternary structure of sea urchin (Strongylocentrotus purpuratus) kinesin. Kinesin prepared from sea urchin cytosol sedimented at 9.6 S on sucrose density gradients and consisted of 130-kd heavy chains plus an 84-kd/78 kd doublet (1 mol heavy chain: 1 mol doublet determined by gel densitometry). Low levels of 110-kd and 90-kd polypeptides were sometimes present as well. The 84-kd/78 kd polypeptides are thought to be light chains because they were precipitated from the kinesin preparation at a stoichiometry of one mol doublet per 1 mol heavy chain using SUK4-Sepharose immunoaffinity resins. The 110-kd and 90-kd peptides, by contrast, were removed using this immunoadsorption method. SUK4-Sepharose immunoaffinity chromatography was also used to purify the 130-kd heavy chain and 84-kd/78-kd doublet (1 mol heavy chain: 1 mol doublet) directly from sea urchin egg cytosolic extracts, and from a MAP (microtubule-associated protein) fraction eluted by ATP from microtubules prepared in the presence of AMPPNP but not from microtubules prepared in ATP. The finding that sea urchin kinesin contains equimolar quantities of heavy and light chains, together with the aforementioned data on kinesin morphology, suggests that native sea urchin kinesin is a tetramer assembled from two light chains and two heavy chains.     

An outer arm dynein light chain acts in a conformational switch for flagellar motility

A system distinct from the central pair–radial spoke complex was proposed to control outer arm dynein function in response to alterations in the mechanical state of the flagellum. In this study, we examine the role of a Chlamydomonas reinhardtii outer arm dynein light chain that associates with the motor domain of the γ heavy chain (HC). We demonstrate that expression of mutant forms of LC1 yield dominant-negative effects on swimming velocity, as the flagella continually beat out of phase and stall near or at the power/recovery stroke switchpoint. Furthermore, we observed that LC1 interacts directly with tubulin in a nucleotide-independent manner and tethers this motor unit to the A-tubule of the outer doublet microtubules within the axoneme. Therefore, this dynein HC is attached to the same microtubule by two sites: via both the N-terminal region and the motor domain. We propose that this γ HC–LC1–microtubule ternary complex functions as a conformational switch to control outer arm activity.     

The Light Chain 1 Subunit of the Microtubule-Associated Protein 1B (MAP1B) Is Responsible for Tiam1 Binding and Rac1 Activation in Neuronal Cells

Microtubule-associated protein 1B (MAP1B) is a neuronal protein involved in the stabilization of microtubules both in the axon and somatodendritic compartments. Acute, genetic inactivation of MAP1B leads to delayed axonal outgrowth, most likely due to changes in the post-translational modification of tubulin subunits, which enhances microtubule polymerization. Furthermore, MAP1B deficiency is accompanied by abnormal actin microfilament polymerization and dramatic changes in the activity of small GTPases controlling the actin cytoskeleton. In this work, we showed that MAP1B interacts with a guanine exchange factor, termed Tiam1, which specifically activates Rac1. These proteins co-segregated in neurons, and interact in both heterologous expression systems and primary neurons. We dissected the molecular domains involved in the MAP1B-Tiam1 interaction, and demonstrated that pleckstrin homology (PH) domains in Tiam1 are responsible for MAP1B binding. Interestingly, only the light chain 1 (LC1) of MAP1B was able to interact with Tiam1. Moreover, it was able to increase the activity of the small GTPase, Rac1. These results suggest that the interaction between Tiam1 and MAP1B, is produced by the binding of LC1 with PH domains in Tiam1. The formation of such a complex impacts on the activation levels of Rac1 confirming a novel function of MAP1B related with the control of small GTPases. These results also support the idea of cross-talk between cytoskeleton compartments inside neuronal cells.     

The Compact and Biologically Relevant Structure of Inter-α-inhibitor Is Maintained by the Chondroitin Sulfate Chain and Divalent Cations

Inter-α-inhibitor is a proteoglycan of unique structure. The protein consists of three subunits, heavy chain 1, heavy chain 2, and bikunin covalently joined by a chondroitin sulfate chain originating at Ser-10 of bikunin. Inter-α-inhibitor interacts with an inflammation-associated protein, tumor necrosis factor-inducible gene 6 protein, in the extracellular matrix. This interaction leads to transfer of the heavy chains from the chondroitin sulfate of inter-α-inhibitor to hyaluronan and consequently to matrix stabilization. Divalent cations and heavy chain 2 are essential co-factors in this transfer reaction. In the present study, we have investigated how divalent cations in concert with the chondroitin sulfate chain influence the structure and stability of inter-α-inhibitor. The results showed that Mg²⁺ or Mn²⁺, but not Ca²⁺, induced a conformational change in inter-α-inhibitor as evidenced by a decrease in the Stokes radius and a bikunin chondroitin sulfate-dependent increase of the thermodynamic stability. This structure was shown to be essential for the ability of inter-α-inhibitor to participate in extracellular matrix stabilization. In addition, the data revealed that bikunin was positioned adjacent to both heavy chains and that the two heavy chains also were in close proximity. The chondroitin sulfate chain interacted with all protein components and inter-α-inhibitor dissociated when it was degraded. Conventional purification protocols result in the removal of the Mg²⁺ found in plasma and because divalent cations influence the conformation and affect function it is important to consider this when characterizing the biological activity of inter-α-inhibitor.     

Interchain disulphide-bond formation in the assembly of immunoglobulin G. Heavy-chain dimer as an intermediate

1. The role of disulphide-bond formation in the assembly of G_2a myeloma protein 5563 was studied by pulse-labelling ascitic plasma cells of tumour-line 5563 for 2–8min. with radioactive amino acids, and analysing the intracellular proteins. Myeloma-protein determinants were first purified by ion-exchange chromatography under conditions that do not dissociate non-covalently linked sub-units of immunoglobulin G. The pulse-labelled material was then analysed by electrophoresis on polyacrylamide gels in sodium dodecyl sulphate–phosphate–urea buffer, which dissociates non-covalently linked sub-units; after gel electrophoresis, radioactive protein bands were located by radioautography, and characterized immunologically after elution. 2. Two heavy-chain intermediates were detected: (i) heavy-chain dimer; (ii) the dimer with one light chain attached. Free light chains had previously been shown to be intermediates in assembly. No evidence for the presence of half-molecules (one light chain attached to one heavy chain) was obtained. The formation of the disulphide bond between the heavy chains thus appears to precede the light-chain–heavy-chain linkage in immunoglobulin G assembly.     

Characterization of the interaction between the heavy and light chains of bovine factor Va.

Bovine factor Va has been previously been shown to consist of heavy (M(r) = 94,000) and light chains (M(r) = 81,000), that interact in a manner dependent upon the presence of either calcium or manganese ions. In an attempt to understand the mechanism of subunit interaction we have studied the effects of temperature and ions on factor Va stability. The rates of formation of factor Va from isolated chains and dissociation were temperature-dependent with an energy of activation of 6.2 and 1.3 kcal mol-1, respectively. The yield of factor Va from isolated chains was inversely related to the amount of time the chains were incubated at 4 degrees C. Incubation of individual chains revealed that the heavy chain is cold-labile, an effect that is reversible. Manganese ion was observed to prevent the conversion to the inactive form. High salt tends to stabilize the two-chain structure of factor Va, but is inhibitory to its formation from isolated chains. High concentrations of either manganese or calcium ions also inhibited reconstitution of activity. The light chain, in particular, was sensitive to the presence of manganese or calcium ion. Heavy chain that had been cleaved by activated protein C had a weakened interaction with the light chain, and the resulting complex had no procoagulant activity. Cooling of the heavy chain to 4 degrees C enhanced its intrinsic fluorescence. Manganese ion prevented some of this enhancement. The heavy chain fluorescence returned to the room temperature value with a half-life of approximately 10 min. In the presence of manganese ion relaxation was accelerated. The intrinsic fluorescence of activated protein C-cleaved heavy chain was not increased when the temperature was decreased. These data suggest that the heavy chain can exist in two forms. Elevated temperature converts it to a form that can bind ions and have a productive interaction with the light chain. However, conditions that prevent the heavy chain from combining with the light chain also stabilize the two subunit structure, suggesting that the high affinity of the complex is due to conformational changes that occur after chain interaction.     

Backbone and partial side chain assignment of the microtubule binding domain of the MAP1B light chain

Microtubule-associated protein 1B (MAP1B) is a classical high molecular mass microtubule-associated protein expressed at high levels in the brain. It confers specific properties to neuronal microtubules and is essential for neuronal differentiation, brain development and synapse maturation. Misexpression of the protein contributes to the development of brain disorders in humans. However, despite numerous reports demonstrating the importance of MAP1B in regulation of the neuronal cytoskeleton during neurite extension and axon guidance, its mechanism of action is still elusive. Here we focus on the intrinsically disordered microtubule binding domain of the light chain of MAP1B. In order to obtain more detailed structural information about this domain we assigned NMR chemical shifts of backbone and aliphatic side chain atoms.     

MAP 1C is a microtubule-activated ATPase which translocates microtubules in vitro and has dynein-like properties

We observe that one of the high molecular mass microtubule-associated proteins (MAPs) from brain exhibits nucleotide-dependent binding to microtubules. We identify the protein as MAP IC, which was previously described in this laboratory as a minor component of standard microtubule preparations (Bloom, G.S., T. Schoenfeld, and R.B. Vallee, 1984, J. Cell Biol., 98:320-330). We find that MAP 1C is enriched in microtubules prepared in the absence of nucleotide. Kinesin is also found in these preparations, but can be specifically extracted with GTP. A fraction highly enriched in MAP 1C can be prepared by subsequent extraction of the microtubules with ATP. Two activities cofractionate with MAP 1C upon further purification, a microtubule-activated ATPase activity and a microtubule-translocating activity. These activities indicate a role for the protein in cytoplasmic motility. MAP 1C coelectrophoreses with the beta heavy chain of Chlamydomonas flagellar dynein, and has a sedimentation coefficient of 20S. Exposure to ultraviolet light in the presence of vanadate and ATP results in the production of two large fragments of MAP 1C. These characteristics suggest that MAP 1C may be a cytoplasmic analogue of axonemal dynein.     

A Specific Light Chain of Kinesin Associates with Mitochondria in Cultured Cells

The motor protein kinesin is implicated in the intracellular transport of organelles along microtubules. Kinesin light chains (KLCs) have been suggested to mediate the selective binding of kinesin to its cargo. To test this hypothesis, we isolated KLC cDNA clones from a CHO-K1 expression library. Using sequence analysis, they were found to encode five distinct isoforms of KLCs. The primary region of variability lies at the carboxyl termini, which were identical or highly homologous to carboxyl-terminal regions of rat KLC B and C, human KLCs, sea urchin KLC isoforms 1–3, and squid KLCs. To examine whether the KLC isoforms associate with different cytoplasmic organelles, we made an antibody specific for a 10-amino acid sequence unique to B and C isoforms. In an indirect immunofluorescence assay, this antibody specifically labeled mitochondria in cultured CV-1 cells and human skin fibroblasts. On Western blots of total cell homogenates, it recognized a single KLC isoform, which copurified with mitochondria. Taken together, these data indicate a specific association of a particular KLC (B type) with mitochondria, revealing that different KLC isoforms can target kinesin to different cargoes.     

Silk fibroin of Bombyx mori is secreted, assembling a high molecular mass elementary unit consisting of H-chain, L-chain, and P25, with a 6:6:1 molar ratio

Silk fibroin produced by the silkworm Bombyx mori consists of a heavy chain, a light chain, and a glycoprotein, P25. The heavy and light chains are linked by a disulfide bond, and P25 associates with disulfide-linked heavy and light chains by noncovalent interactions. Quantitative enzyme-linked immunosorbent assay revealed that molar ratios of the heavy chain, light chain, and P25 were 6:6:1, both in cocoons and in fibroin secreted into the lumen of posterior silk gland. Trace amounts of fibroin produced by three "naked pupa" mutants of B. mori lacked the light chain, but the molar ratio of heavy chain and P25 was also 6:1. Gel filtration chromatography and sedimentation equilibrium analysis demonstrated that a large protein complex of approximately 2.3 MDa, designated an elementary unit of fibroin having 6:6:1 molar ratios of the heavy chain, light chain, and P25, existed in posterior silk gland cells. Inaccessibility of biotinylated concanavalin A to the native elementary unit and partial dissociation of the elementary unit after incubation with excess N-glycosidase F or endoglycosidase H suggest that a single molecule of P25 is located internally and plays an important role in maintaining integrity of the complex.     

The Mr 140,000 Intermediate Chain of Chlamydomonas Flagellar Inner Arm Dynein Is a WD-Repeat Protein Implicated in Dynein Arm Anchoring

Previous structural and biochemical studies have revealed that the inner arm dynein I1 is targeted and anchored to a unique site located proximal to the first radial spoke in each 96-nm axoneme repeat on flagellar doublet microtubules. To determine whether intermediate chains mediate the positioning and docking of dynein complexes, we cloned and characterized the 140-kDa intermediate chain (IC140) of the I1 complex. Sequence and secondary structural analysis, with particular emphasis on β-sheet organization, predicted that IC140 contains seven WD repeats. Reexamination of other members of the dynein intermediate chain family of WD proteins indicated that these polypeptides also bear seven WD/β-sheet repeats arranged in the same pattern along each intermediate chain protein. A polyclonal antibody was raised against a 53-kDa fusion protein derived from the C-terminal third of IC140. The antibody is highly specific for IC140 and does not bind to other dynein intermediate chains or proteins in Chlamydomonas flagella. Immunofluorescent microscopy of Chlamydomonas cells confirmed that IC140 is distributed along the length of both flagellar axonemes. In vitro reconstitution experiments demonstrated that the 53-kDa C-terminal fusion protein binds specifically to axonemes lacking the I1 complex. Chemical cross-linking indicated that IC140 is closely associated with a second intermediate chain in the I1 complex. These data suggest that IC140 contains domains responsible for the assembly and docking of the I1 complex to the doublet microtubule cargo.     

MAP1B‐LC1 prevents autophagosome formation by linking syntaxin 17 to microtubules

In fed cells, syntaxin 17 (Stx17) is associated with microtubules at the endoplasmic reticulum–mitochondria interface and promotes mitochondrial fission by determining the localization and function of the mitochondrial fission factor Drp1. Upon starvation, Stx17 dissociates from microtubules and Drp1, and binds to Atg14L, a subunit of the phosphatidylinositol 3‐kinase complex, to facilitate phosphatidylinositol 3‐phosphate production and thereby autophagosome formation, but the mechanism underlying this phenomenon remains unknown. Here we identify MAP1B‐LC1 (microtubule‐associated protein 1B‐light chain 1) as a critical regulator of Stx17 function. Depletion of MAP1B‐LC1 causes Stx17‐dependent autophagosome accumulation even under nutrient‐rich conditions, whereas its overexpression blocks starvation‐induced autophagosome formation. MAP1B‐LC1 links microtubules and Stx17 in fed cells, and starvation causes the dephosphorylation of MAP1B‐LC1 at Thr217, allowing Stx17 to dissociate from MAP1B‐LC1 and bind to Atg14L. Our results reveal the mechanism by which Stx17 changes its binding partners in response to nutrient status.     

Microtubule-associated protein 1S (MAP1S) bridges autophagic components with microtubules and mitochondria to affect autophagosomal biogenesis and degradation

The ubiquitously distributed MAP1S is a homologue of the exclusively neuronal distributed microtubule-associated protein 1A and 1B (MAP1A/B). They give rise to multiple isoforms through similar post-translational modification. Isoforms of MAP1S have been implicated in microtubule dynamics and mitotic abnormalities and mitotic cell death. Here we show that ablation of the Map1s gene in mice caused reduction in the B-cell CLL/lymphoma 2 or xL (Bcl-2/xL) and cyclin-dependent kinase inhibitor 1B (P27) protein levels, accumulation of defective mitochondria, and severe defects in response to nutritive stress, suggesting defects in autophagosomal biogenesis and clearance. Furthermore, MAP1S isoforms interacted with the autophagosome-associated light chain 3 of MAP1A/B (LC3), a homologue of yeast autophagy-related gene 8 (ATG8), and recruited it to stable microtubules in a MAP1S and LC3 isoform-dependent mode. In addition, MAP1S interacted with mitochondrion-associated leucine-rich PPR-motif containing protein (LRPPRC) that interacts with the mitophagy initiator and Parkinson disease-related protein Parkin. The three-way interactions of MAP1S isoforms with LC3 and microtubules as well as the interaction of MAP1S with LRPPRC suggest that MAP1S isoforms may play positive roles in integration of autophagic components with microtubules and mitochondria in both autophagosomal biogenesis and degradation. For the first time, our results clarify roles of MAP1S in bridging microtubules and mitochondria with autophagic and mitophagic initiation, maturation, trafficking, and lysosomal clearance. Defects in the MAP1S-regulated autophagy may impact heart disease, cancers, neurodegenerative diseases, and a wide range of other diseases.