以林相图为基础的不同取样方式对植被排序分析结果的影响

以6种不同方式对林相图中同一样带取样,采用CA、DCA和CCA 3种排序方法,研究了取样方式对排序轴的解释效果、物种与环境因子、环境因子之间、环境因子与坐标轴之间关系的影响.结果表明,样方大小和形状的变化在不同程度上改变了排序结果.大样方和长方形样方都增强了排序轴的解释效果,并对双序图中稀有种、独特种的位置有较大的影响;环境因子中土壤因子对样方的大小和形状都很敏感,坡度、经纬度只对样方大小敏感,坡位、海拔、温度和降水则对样方形状敏感;随着样方面积的增加,海拔、温度和降水的作用降低,而坡向的作用增加.     

Muscle‐induced loading as an important source of variation in craniofacial skeletal shape

The shape of the craniofacial skeleton is constantly changing through ontogeny and reflects a balance between developmental patterning and mechanical‐load‐induced remodeling. Muscles are a major contributor to producing the mechanical environment that is crucial for “normal” skull development. Here, we use an F₅ hybrid population of Lake Malawi cichlids to characterize the strength and types of associations between craniofacial bones and muscles. We focus on four bones/bone complexes, with different developmental origins, alongside four muscles with distinct functions. We used micro‐computed tomography to extract 3D information on bones and muscles. 3D geometric morphometrics and volumetric measurements were used to characterize bone and muscle shape, respectively. Linear regressions were performed to test for associations between bone shape and muscle volume. We identified three types of associations between muscles and bones: weak, strong direct (i.e., muscles insert directly onto bone), and strong indirect (i.e., bone is influenced by muscles without a direct connection). In addition, we show that although the shape of some bones is relatively robust to muscle‐induced mechanical stimulus, others appear to be highly sensitive to muscular input. Our results imply that the roles for muscular input on skeletal shape extend beyond specific points of origin or insertion and hold significant potential to influence broader patterns of craniofacial geometry. Thus, changes in the loading environment, either as a normal course of ontogeny or if an organism is exposed to a novel environment, may have pronounced effects on skeletal shape via near and far‐ranging effects of muscular loading.     

Multivariate analysis of the sexual dimorphism of the hip bone in a modern human population and in early hominids

A large sample of hip bones of known sex coming from one modern population is studied morphologically and by multivariate analysis to investigate sexual dimorphism patterns. A principal component analysis of raw data shows that a large amount of the hip bone sexual dimorphism is accounted for by size differences, but that sex-linked shape variation is also very conspicuous and cannot be considered an allometric consequence of differences in body size between the sexes. The PCA of transformed (“shape”) variables indicates that the female hip bones are different in those traits associated with a relatively larger pelvic inlet (longer pubic bones, a greater degree of curvature of the iliopectineal line, and a more posterior position of the auricular surface), as well as a broader sciatic notch. The analysis of nonmetric traits also shows marked sexual dimorphism in the position of the sacroiliac joint in the iliac bone, in the shape of the sciatic notch, in pubic morphology, and in the presence of the pre-auricular sulcus in females. When the australopithecine AL 288-1 and Sts 14 hip bones are included in the multivariate analysis, they appear as “ultra-females.” In particular these early hominids exhibit extraordinarily long pubic bones and iliopectineal lines, which cannot be explained by allometry. © 1994 Wiley-Liss, Inc.     

Comparative analysis of the nervous system structure of polymorphic zooids in marine bryozoans

The nervous system structure was compared for the first time in avicularia and vibracula in seven species of the cheilostome bryozoans from six families by immunohistochemical methods and confocal scanning microscopy. Regardless of significant differences in heterozooid shape, size, and position in a colony, their muscular and nervous systems have a common structure, which suggests their parallel evolution.     

富钟瘰螈和广西瘰螈骨骼系统的比较研究

采用硬骨-软骨双染色技术,研究我国广西产的富钟瘰螈和广西瘰螈骨骼系统,包括头骨、脊柱和附肢骨骼,并对各骨块的形状、位置以及与邻近骨块的关系都作了详细的描述;同时,比较了富钟瘰螈和广西瘰螈骨骼特征的差异,并将富钟瘰螈、广西瘰螈与有斑肥螈、贵州疣螈和东方蝾螈骨骼系统进行了比较,为揭示瘰螈属种间演化关系和蝾螈科属间演化关系提供一定的依据.     

Early development of the cephalic skeleton of Barbus barbus (Teleostei, Cyprinidae)

The inception, and development of the cephalic skeleton of Barbus barbus from hatching to 24 days passes through periods of fast and slow growth; these rates are not the same in different parts of the skull. Trabeculae, parachordal plates, Meckelian cartilages and hyposymplectics are present at hatching. Then the cartilaginous floor of the neurocranium develops, the pars quadrata, the hyoid bars and branchial arches elements appear shortly before the first movable dermal bones, the dentaries, maxillae and opercles. The first bone of the braincase to appear is the parasphenoid; other bones develop subsequently and at the same time: the angular, quadrate, interopercle and fifth ceratobranchial. Later the splanchnocranium continues to develop at a relatively fast rate while the neurocranium shows little growth. The braincase does not begin to close before the 24th day, nor do the first bones of the skull roof appear, while the bucco-pharyngeal apparatus is complete, having the adult shape. The early constitution of the latter structures seems to be linked with the mechanical demands of biological functions such as breathing and feeding.     

Technical note: Shape variability induced by reassembly of human pelvic bones

In traditional as well as in geometric morphometric studies, the shape of the pelvis is often quantified after the reassembly of the two hip bones and the sacrum. However, on dry bones, the morphology of the cartilaginous tissues that form the two sacroiliac joints and the pubic symphysis before death remains unknown, leading to potential inaccuracies and errors during the reassembly process. A protocol was established to investigate the effects of reassembly on the quantification of pelvis shape. The shape of fresh pelves obtained after dissection, in which the three bones are in an anatomically relevant position, was compared with the shape of different reassemblies based on the individual dry bones of the same individuals. Our results demonstrated a significant effect of the reassembly. Variation in the reassembly process is likely related, first, to the complete absence of cartilaginous tissues on dry bones and, second, to the morphology of the sacroiliac joint which, in vivo, allows physiological movements, resulting in different potential positions of the two sacroiliac surfaces relative to one another. However, the artificial variation introduced by the reassembly process appears small compared with the biological variation between the different individuals.     

Anatomical study of the skull of amphisbaenian Diplometopon zarudnyi (Squamata,Amphisbaenia)

This study investigates the amphisbaenian species skull which includes cranium, lower jaw and hyoid apparatus. The medial dorsal bones comprise the premaxilla, nasal, frontal and parietal. The premaxilla carries a large medial tooth and two lateral ones. The nasals are paired bones and separated by longitudinal suture. Bones of circumorbital series are frontal, orbitosphenoid and maxilla. The occipital ring consists of basioccipital, supraoccipital and exooccipital. Supraoccipital and basioccipital are single bones while the exo-occipitals are paired. The bones of the palate comprise premaxilla, maxilla, septomaxilla, palatine, pterygoid, ectopterygoid, basisphenoid, parasphenoid, orbitosphenoid and laterosphenoid. Prevomer and pterygoid teeth are absent. Palatine represent by two separate bones. The temporal bones are clearly visible. The lower jaw consists of the dentary, articular, coronoid, supra-angular, angular and splenial. The hyoid apparatus is represented by a Y-shaped structure. The mandible is long and is suspended from the braincase via relatively short quadrate. There is an extensive contact between the long angular and the large triangular coronoid. Thus inter-mandibular joint is bridged completely by the angular and consequently, the lower jaws are relatively rigid and kinetic. The maxillae are suspended from the braincase largely by ligaments and muscles rather than through bony articulation. In conclusion, the skull shape affects feeding strategy in Diplometopon zarudnyi. The prey is ingested and transported via a rapid maxillary raking mechanism.     

The variation of the cross-sectional shape in the long bones of birds and mammals

The transverse and sagittal diameters of the long bones were measured in a sample of 53 species of eutherian mammals and 36 species of birds. The scaling of the transverse and sagittal diameters of each bone to body mass was calculated. For each bone the ratio of sagittal/transverse diameter was calculated, as an expression of the cross-sectional shape of the bones. The distributions of the ratios were not significantly different from normality in all the avian bones and in the mammalian femur and tibia. In most cases, the mean of the distribution was significantly different from 1 (circular shape). The analysis shows that changes in the ratio can be caused by selective factors, considering the correlation predicted between the breaking moments and the radii, but at the same time the cross-sectional shape of mammalian and avian long bones may have a phylogenetic basis. Finally, the previous assumption of relationship between bone curvature and stress predictability, is also discussed.     

First evidence of dinosaurian secondary cartilage in the post-hatching skull of Hypacrosaurus stebingeri (Dinosauria, Ornithischia)

Bone and calcified cartilage can be fossilized and preserved for hundreds of millions of years. While primary cartilage is fairly well studied in extant and fossilized organisms, nothing is known about secondary cartilage in fossils. In extant birds, secondary cartilage arises after bone formation during embryonic life at articulations, sutures and muscular attachments in order to accommodate mechanical stress. Considering the phylogenetic inclusion of birds within the Dinosauria, we hypothesized a dinosaurian origin for this "avian" tissue. Therefore, histological thin sectioning was used to investigate secondary chondrogenesis in disarticulated craniofacial elements of several post-hatching specimens of the non-avian dinosaur Hypacrosaurus stebingeri (Ornithischia, Lambeosaurinae). Secondary cartilage was found on three membrane bones directly involved with masticatory function: (1) as nodules on the dorso-caudal face of a surangular; and (2) on the bucco-caudal face of a maxilla; and (3) between teeth as islets in the alveolar processes of a dentary. Secondary chondrogenesis at these sites is consistent with the locations of secondary cartilage in extant birds and with the induction of the cartilage by different mechanical factors - stress generated by the articulation of the quadrate, stress of a ligamentous or muscular insertion, and stress of tooth formation. Thus, our study reveals the first evidence of "avian" secondary cartilage in a non-avian dinosaur. It pushes the origin of this "avian" tissue deep into dinosaurian ancestry, suggesting the creation of the more appropriate term "dinosaurian" secondary cartilage.     

Development and diversity of the suspensorium of trichomycterids and comparison with loricarioids (Teleostei: Siluriformes)

Studies of ontogenetic series of trichomycterids and other catfishes reveal that the suspensorium of siluroids is highly specialized; several synapomorphies separate siluroids from other teleosts. In siluroids, the palatoquadrate is divided into pars autopalatina and pars pterygoquadrata and both are usually connected by the autopaiatine-metapterygoid ligament. The pterygoquadrate is broadly joined to the dorsal limb of the hyoid arch, forming a cartilaginous hyomandibular-symplectic-pterygoquadrate plate in early ontogeny. This produces a special alignment of the hyomandibula and quadrate which is characteristic of siluroids. A symplectic bone is absent. The interhyal is absent in trichomycterids and astroblepids. Dorsal and ventral limbs of the hyoid arch are connected by a ligament. A rudimentary interhyal and this ligament are present in primitive siluroids such as diplomystids and nematogenyids as well as loricariids. The metapterygoid arises as an anterior ossification of the pars pterygoquadrata in siluroids. The formation and position of the metapterygoid exhibit two patterns: (1) the metapterygoid develops as an ossification of a cartilaginous projection positioned between the future hyomandibula and quadrate in primitive catfishes (e.g., Diplomystes) as well as in Nematogenys, callichthyids, loricariids, and astroblepids; (2) the metapterygoid arises as an ossification of the cartilaginous projection (pterygoid process) positioned just above the articular facet of the quadrate for the lower jaw. An ossified anterior chondral pterygoid process of the complex quadrate is present in trichomycterids, whereas the process is absent (simple quadrate) in catfishes such as diplomystids, nematogenyids, callichthyids, and loricariids. The anterior membranous process of the quadrate of Astroblepus is non-homologous with the chondral pterygoid process of trichomycterids; both structures arose independently within the loricarioids. Despite topological relationships, the origin and development of bones reveal the presence of a chondral hyomandibula which develops a large meinbranous outgrowth during ontogeny and a chondral metapterygoid in trichomycterids. The presence of a compound hyomandibula + metapterygoid or a compound metapterygoid + ectopterygoid + entopterygoid have no developmental support in trichomycterines or other siluroids. The “entopterygoid” of Nematogenys and Diplomystes arises as an ossification of a ligament. The dermal entopterygoid of other ostariophysans and the “entopterygoid” are homologous. An ectopterygoid or tendon bone “ectopterygoid” is absent in loricarioids. The suspensorium is an important structural system which has significant evolutionary transformations which characterize loricarioid subgroups; however, no character, of the suspensorium supports the monophyly of the loricarioids.     

Comparative anatomy and evolution of the odontocete forelimb

Previous studies of the odontocete forelimb have not considered flipper anatomy in an evolutionary context. This study of 39 cetacean species (1 extinct archaeocete, 31 extant and 3 extinct odontocetes, and 4 mysticetes), provides a detailed comparative analysis of the major bones and muscles of the odontocete flipper. Differences across families in the anatomy of the deltoid, supraspinatus, coracobrachialis, and subscapularis muscles correspond directly to size and shape of forelimb elements. Specialization of the different shoulder girdle muscles allows for more maneuverability of the flipper by independent control of muscular columns. Maximum likelihood analyses helped determine the correlation of characters studied by ancestral state reconstruction, and revealed independent evolution of osteological and external characters among various lineages. Comparative Analyses by Independent Contrast (CAIC), found several contrasts between flipper area and body length for several extant odontocetes and a linear relationship was inferred. Degree of hyperphalangy and the soft tissue encasing the flipper helped determine three flipper morphologies based on aspect ratio (AR) and qualitative data. These results suggest that differences in flipper shape have an evolutionary component and are likely largely in response to ecological requirements.     

A New Pterosaur from the Jurassic of Cuba

Cacibupteryx caribensis gen. et sp. nov. is a new pterosaur of the family Rhamphorhynchidae found in western Cuba, in rocks of the Jagua Formation (Middle–Upper Oxfordian). The holotype, a skull and part of the left wing, is one of the few Jurassic pterosaurs that is well preserved in three dimensions. The new taxon shares characters with early and late Jurassic pterosaurs, and is one of the few late Jurassic taxa from western Laurasia and Gondwana. Furthermore, Cacibupteryx joins Nesodactylus hesperius Colbert from Cuba, and Sordes pilosus Sharov, from Kazakhstan as the most complete pterosaur recorded from the Middle–Upper Oxfordian. Cacibupteryx caribensis is one of the largest Jurassic pterosaurs known, and its skull possesses several distinct characters, including relatively broad roof elements (mainly frontal and parietal bones), a jugal with a prominent recess, occipital table trapezoidal in shape with the maximum width between the quadrate bones, and a small fenestra located in the posterior part of the pterygoid bones. In the Oxfordian, the Caribbean Corridor separated Laurasia and western Gondwana. The diversity of the marine herpetofauna found in the Jagua Vieja Member (Jagua Formation), and of teleostean fish, confirms that the corridor was an effective seaway over which flew at least Nesodactylus and Cacibupteryx .     

Early Lens Ablation Causes Dramatic Long-Term Effects on the Shape of Bones in the Craniofacial Skeleton of Astyanax mexicanus

The Mexican tetra, Astyanax mexicanus, exists as two morphs of a single species, a sighted surface morph and a blind cavefish. In addition to eye regression, cavefish have an increased number of taste buds, maxillary teeth and have an altered craniofacial skeleton compared to the sighted morph. We investigated the effect the lens has on the development of the surrounding skeleton, by ablating the lens at different time points during ontogeny. This unique long-term study sheds light on how early embryonic manipulations on the eye can affect the shape of the adult skull more than a year later, and the developmental window during which time these effects occur. The effects of lens ablation were analyzed by whole-mount bone staining, immunohistochemisty and landmark based morphometric analyzes. Our results indicate that lens ablation has the greatest impact on the skeleton when it is ablated at one day post fertilisation (dpf) compared to at four dpf. Morphometric analyzes indicate that there is a statistically significant difference in the shape of the supraorbital bone and suborbital bones four through six. These bones expand into the eye orbit exhibiting plasticity in their shape. Interestingly, the number of caudal teeth on the lower jaw is also affected by lens ablation. In contrast, the shape of the calvariae, the length of the mandible, and the number of mandibular taste buds are unaltered by lens removal. We demonstrate the plasticity of some craniofacial elements and the stability of others in the skull. Furthermore, this study highlights interactions present between sensory systems during early development and sheds light on the cavefish phenotype.     

Functional anatomy of the tarsier foot

Tarsiers possess a very odd musculoskeletal foot anatomy that goes beyond their acknowledged specialized leaping adaptations. Tarsius has evolved a fundamentally different method of bone rotation to achieve an inverted foot position during grasping and has developed an unusual muscular system for holding onto vertical supports. Although galagos and tarsiers possess elongated foot bones as adaptations for leaping, galagos utilize many more types of movements, have specialized osteological surface for inversion, and have a more common type of muscle development in the foot and leg than tarsiers possess. Likewise, the Omomyidae, the ancestral lineage of Tarsius, exhibit a lack of morphological similarity with Tarsius in the known foot joints.     

Physique types and the skeletal mineral saturation of young men and women

The term "massiveness of the skeleton" does not reflect the amount of the mineral component in bones. As demonstrates application of the standard linear x-ray densitometry, in a more "massive" skeleton amount of mineral salts per a volume unit of the osseous tissue is less than in a thin "gracile" skeleton of the thoracal type of constitution. The muscular type of constitution concerning the mineral saturation occupies an intermediate position between the thoracal and digestive constitutional types.     

Three-dimensional topology optimization model to simulate the external shapes of bone

Elucidation of the mechanism by which the shape of bones is formed is essential for understanding vertebrate development. Bones support the body of vertebrates by withstanding external loads, such as those imposed by gravity and muscle tension. Many studies have reported that bone formation varies in response to external loads. An increased external load induces bone synthesis, whereas a decreased external load induces bone resorption. This relationship led to the hypothesis that bone shape adapts to external load. In fact, by simulating this relationship through topology optimization, the internal trabecular structure of bones can be successfully reproduced, thereby facilitating the study of bone diseases. In contrast, there have been few attempts to simulate the external structure of bones, which determines vertebrate morphology. However, the external shape of bones may be reproduced through topology optimization because cells of the same type form both the internal and external structures of bones. Here, we constructed a three-dimensional topology optimization model to attempt the reproduction of the external shape of teleost vertebrae. In teleosts, the internal structure of the vertebral bodies is invariable, exhibiting an hourglass shape, whereas the lateral structure supporting the internal structure differs among species. Based on the anatomical observations, we applied different external loads to the hourglass-shaped part. The simulations produced a variety of three-dimensional structures, some of which exhibited several structural features similar to those of actual teleost vertebrae. In addition, by adjusting the geometric parameters, such as the width of the hourglass shape, we reproduced the variation in the teleost vertebrae shapes. These results suggest that a simulation using topology optimization can successfully reproduce the external shapes of teleost vertebrae. By applying our topology optimization model to various bones of vertebrates, we can understand how the external shape of bones adapts to external loads.     

The Origin of the Mammalian Middle Ear

A functional explanation is presented for the shift of the reptilianarticular and quadrate into the mammalian middle ear to becomethe malleus and incus. Modification of the masticatory apparatusof therapsids results in reduction of stresses on the jaw jointand consequently in reduction of posterior elements of the jaw.In the late therapsid, Bienotherium, the quadrate and post-dentaryjaw bones resemble the mammalian malleus and incus which togetherform a lever. The therapsid articular possesses a downturnedretroarticular process (for insertion of M. depressor mandibulae)homologous with the manubrium (force lever arm) of the malleus.About the time of origin of the mammalian (dentarysquamosal)jaw joint and following the origin of the mammalian depressor,the reptilian depressor is lost. This allows the enlarging reptiliantympanum to become attached to the retroarticular process. Thenew lever system thus formed by articular and quadrate increasesthe sensitivity of the ear and the reptilian one-bone systemis replaced. In early mammals the reflected lamina of the angularmigrates posteriorly with the angle of the dentary so that itcontacts and assumes support of the tympanum. Non-homology ofthe monotreme and therian depressors indicates a multiple originof the mammalian middle ear.