The role of vitamin B6 as an antioxidant in the presence of vitamin B2-photogenerated reactive oxygen species. A kinetic and mechanistic study

We report on the photostability of a mixture of vitamins B6 and B2 (riboflavin, Rf) upon visible light irradiation and on the possible role of the vitamin B6 family (B6D) as deactivators of reactive oxygen species (ROS). The work is a systematic kinetic and mechanistic study under conditions in which only Rf absorbs photoirradiation. Pyridoxine, pyridoxal hydrochloride, pyridoxal phosphate and pyridoxamine dihydrochloride were studied as representative members of the vitamin B6 family. The visible light irradiation of dissolved Rf and B6D in pH 7.4 aqueous medium under aerobic conditions induces photoprocesses that mainly produce B6D degradation. The overall oxidative mechanism involves the participation of ROS. Photogenerated (3)Rf* is quenched either by oxygen, giving rise to O(2)((1)Δ(g)) by electronic energy transfer to dissolved ground state oxygen, or by B6D yielding, through an electron transfer process, the neutral radical RfH˙, and O(2)˙(-) in an subsequent step. B6D act as quenchers of O(2)((1)Δ(g)) and O(2)˙(-), the former in a totally reactive event that also inhibits Rf photoconsumption. The common chromophoric moiety of B6D represented by 3-hydroxypyridine, constitutes an excellent model that mimics the kinetic behavior of the vitamin as an antioxidant towards Rf-generated ROS. The protein lysozyme, taken as an O(2)((1)Δ(g))-mediated oxidizable biological target, is photoprotected by B6D from Rf-sensitized photodegradation through the quenching of electronically excited triplet state of the pigment, in a process that competes with O(2)((1)Δ(g)) generation.     

Protoporphyrin IX sensitized titanium oxide gel electrode

Titanium oxide (Ti(O)) xerogel films functionalized by protoporphyrin IX (PPIX) and ferrocene carboxylic acid (FCA) were deposited on indium tin oxide (ITO) electrodes following a sol-gel synthesis. PPIX and FCA were first complexed to titanium oxide precursors, which were then subjected to hydrolysis to obtain a homogenous Ti(O) polymeric network gel doped with PPIX and FCA. The Ti(O) film cast on the ITO electrode has been characterized by UV-Vis absorption, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy and cyclic voltammetry. Illumination of the PPIX doped Ti(O) films on the ITO electrode immersed in aqueous electrolytes onsets photoinduced electron transfer reactions, and a cathodic photocurrent was observed in most cases. This photocurrent response was investigated in detail using a kinetic model. Preliminary investigations of oxygen reduction, lithium and proton insertion into the Ti(O) film have also been carried out.     

Modification of chitosan-methylcellulose composite films with meso-tetrakis(4-sulfonatophenyl)porphyrin

Polysaccharide films containing chitosan, methylcellulose, and a mixture of these polysaccharides in various ratios were prepared and modified with meso-tetrakis(4-sulfonatophenyl)porphyrin in an aqueous medium at pH 7. The modified films were compared with the initial films using spectroscopic methods and microscopic imaging. Electronic (UV-vis absorption, electronic circular dichroism (ECD)) and vibrational (FTIR and Raman) spectra showed that the porphyrin macrocycles had a strong affinity toward chitosan and did not interact with the methylcellulose. The total porphyrin uptake depended on the chitosan: methylcellulose ratio and pure methylcellulose films did not retain porphyrin macrocycles. ECD measurements detected the presence of optically active porphyrin species bound to the films. SEM and AFM images confirmed that the porphyrin macrocycles caused structural changes on the film surface and within the film layer.     

The pH-dependence of photochemical intermediates of O and P in bacteriorhodopsin by continuous light

The pH-dependence of the O and P intermediates in the photocycle of bacteriorhodopsin (bR) on the intensity and duration of the exciting flash was investigated for bR glycerol suspensions and bR gelatin films. Green and red laser flashes (532 and 670 nm) were utilized to generate a photoequilibrium state of bR and O at ambient temperature, and UV-vis spectroscopy was used to determine the photoconversion for the bR suspensions and films. The maximal concentration of the O intermediate was observed to be pH-dependent and the dependency was most pronounced at a slightly alkaline pH values. The photochemical conversion from the O to P intermediate was investigated for both bR suspensions and films. The P intermediate was only found in bR gelatin film. These results indicate that bR gelatin film may be an attractive candidate for the information storage based on P intermediate. It is possible, with red light, to create photoproducts which are thermally stable at ambient temperature and that can be photochemically erased.     

Conduction and photoelectrochemical properties of monomeric and electropolymerized tetraruthenated porphyrin films.

The influence of the preparation method on the structure, conduction and photoelectrochemical properties of monomeric and polymeric tetraruthenated porphyrin films on ITO glass and nanocrystalline TiO2 has been investigated. The films were characterized by STM, MAC mode SFM, cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and combined electro-/photoelectrochemical techniques. The electronic diffusion coefficient D(e)C(m)2 of the films differed by three to four orders of magnitude depending on the procedure employed for the deposition process. The photoelectrochemical properties were evaluated either: by depositing the films directly on transparent ITO electrodes, under an applied bias potential and presence of O2 as electron acceptor; or by depositing the porphyrin material on nanocrystalline TiO2 in a Gr?tzel-type cell. In the first case the porphyrin films exhibited a typical p-type semiconductor behavior described by a Schottky junction model, while in the second the films behaved as a sensitizer of an n-type semiconductor. The photoelectrochemical properties of the porphyrin films and their performance as sensitizer in Gr?tzel-type cells were found to be strongly dependent on the conductivity and packing characteristics of the material. Semi-empirical calculations were performed by modified MM2 and ZINDO/S methods, in order to simulate the packing and electronic structures of the tetraruthenated porphyrin.     

Nanoscale reduction in surface friction of polymer surfaces modified with Sc3 hydrophobin from Schizophyllum commune

Hydrophobins are amphipathic self-assembling proteins secreted by filamentous fungi that exhibit remarkable ability to modify synthetic surfaces. Thin coatings of Sc3 hydrophobin isolated from the wood-rotting fungus Schizophyllum commune were prepared via spin coating and adsorption techniques onto polymeric surfaces. Surface morphology and nanotribological characteristics of the films were evaluated using lateral force microscopy (LFM) and nanoindentation techniques. This paper reports the first observation of reduction in nanoscale relative surface friction of Sc3 hydrophobin protein modified polymeric surfaces. Relative friction coefficients were dramatically reduced and hydrophilicity increased for polymer surfaces modified with Sc3 hydrophobin thin films. Morphology of the protein films as well as degree of surface modification was observed to be a function of film formation technique and composition of the substrate.     

Synthesis and biological evaluation of methoxyphenyl porphyrin derivatives as potential photodynamic agents

A new meso-2,4,6-trimethoxyphenyl porphyrin covalently linked to a 2',6'-dinitro-4'-trifluoromethylphenyl group by an amine bond 5 and its metal complex with Cd(II) 6 was prepared. The photodynamic activities of 5 and 6 were evaluated in vitro on Hep-2 cells. A considerable increase in the photocytotoxic effect was found for 6, which has higher singlet molecular oxygen, O(2)((1)Delta(g)), production.     

A dinuclear europium(III) complex with thenoyltrifluoroacetonato and 1-(2-pyridylzao)-2-naphtholato ligands and its optical properties

Dinuclear lanthanide complexes of the general for Ln₂(TTA)₄(PAN)₂ (Ln = Eu, Gd, Tb, Yb; TTA and monodeprotonated thenoyltrifluoroacetone and PAN 1-(2-pyridylazo)-2-naphthol, respectively) were prepared and structurally characterized. These novel complexes, representing the first examples of crystallographically characterized lanthanide-PAN complexes, each feature a dinuclear core with the metal atoms bridged by the phenolato O atoms of the chelating-bridging PAN ligands. Electronic spectroscopic and photoluminescence studies were carried out for the Eu(III) complex, and the results are consistent with ligand-mediated energy transfer and ligand-sensitized luminescence characteristic of Eu(III). The Eu(III) complex doped into a polymeric film was shown to effectively limit a nanosecond 523-nm laser pulse, and the limiting effect is rationalized in terms of reverse saturable absorption due to the strong absorption of the metal’s excited triplet states that are populated by intersystem crossing.     

Visible-light-induced patterning of Au- and Ag-TiO2 nanocomposite film surfaces on the basis of plasmon photoelectrochemistry.

A novel technique for patterning based on visible light at Au-TiO2 and Ag-TiO2 nanocomposite film surfaces has been developed for the first time. TiO2 films loaded with Au and Ag nanoparticles were modified with hydrophobic thiols to obtain hydrophobic surfaces. The surfaces were converted to hydrophilic by visible light irradiation. Hydrophobic/hydrophilic patterning was also possible by visible light irradiation through a photomask. The patterning was due to removal of the thiol based on plasmon photoelectrochemistry. Visible-light-induced plasmon resonance at the Au and Ag nanoparticles gives rise to charge separation and redox reactions. The thiol is removed from the Au-TiO2 film probably by oxidative desorption, and from the Ag-TiO2 film owing chiefly to oxidation of Ag nanoparticles to Ag+.     

Effect of axially coordinated pi-acid ligands on photovoltaic properties of Zn-tetraphenylporphyrin

Following our earlier observations that the well known doping effect of oxygen and water on electrical properties of porphyrin and phthalocyanine films may be attributed to a pi-acid axial interaction throughout the film in the case of PdTPP, we have compared Zn-TPP films supported on transparent n-doped SnO₂ electrodes which had been treated with several pi-acids in contact with an electrolyte to give photoelectrochemical cells. Photovoltages obtained in contact with a series of solution couples were used to obtain approximate photo flat band potentials. The doped films were examined by magnetic circular dichroism (MCD) spectroscopy so that the electronic effect of the dopant could be diagnosed. It was found that pi-acid dopants cause shifts to low energy in the band which indicates “hole stabilization” in the order pyridine < CO < triphenylarsine. The potentials of zero photopotential ‘E_FB’, correlate approximately with spectral shifts. It is concluded that manipulation of axial ligand dopants is a promising method for design of metal porphyrin and perhaps phthalocyanine films with desired photovoltaic properties.     

Photoinactivation of Escherichia coli using porphyrin derivatives with different number of cationic charges

The photodynamic effect of meso-substituted cationic porphyrins, 5-[4-(trimethylammonium)phenyl]-10,15,20-tris(2,4,6-trimethoxyphenyl)porphyrin iodide 1, 5,10-di(4-methylphenyl)-15,20-di(4-trimethylammoniumphenyl)porphyrin iodide 2 and 5-(4-trifluorophenyl)-10,15,20-tris(4-trimethylammoniumphenyl)porphyrin iodide 3, have been investigated in both homogeneous medium bearing photooxidizable substrates and in vitro on a typical gram-negative bacterium Escherichia coli. Absorption and fluorescence spectroscopic studies were compared in N,N-dimethylformamide. Fluorescence quantum yields (varphiF) of 0.10, 0.06 and 0.08 were calculated for porphyrins 1, 2 and 3, respectively. The singlet molecular oxygen, O2(1Deltag), production was evaluated using 9,10-dimethylanthracene yielding values of 0.66, 0.36 and 0.42 for porphyrins 1, 2 and 3, respectively. Guanosine 5'-monophosphate was used as biological substrate model. Similar decomposition of guanosine 5'-monophosphate was obtained using these cationic porphyrins as sensitizer. In biological medium, photosensitized inactivation of E. coli was analyzed using cells without and with one washing step. E. coli cultures were treated with sensitizer at 37 degrees C for 30 min in dark. In both procedures, a higher photoinactivation of cells (>99.999%) was found for cells treated with 10 microM of tricationic porphyrin 3 and irradiated for 5 min with visible light. Porphyrins 1 and 2 only show an important photodamage when the cells are irradiated without washing step. These results indicated that the tetracationic porphyrin 3 could be a promising sensitizer with potential applications in the photoinactivation of bacterial cells by photodynamic therapy.     

Photodynamic activity of cationic and non-charged Zn(II) tetrapyridinoporphyrazine derivatives: biological consequences in human erythrocytes and Escherichia coli.

The photodynamic activity of a cationic Zn(II) tetramethyltetrapyridinoporphyrazinium salt (ZnPc ) was compared with that of a non-charged Zn(II) tetrapyridinoporphyrazine (ZnPc 1), both in vitro using human red blood (HRB) cells and a typical Gram-negative bacterium Escherichia coli. Absorption and fluorescence spectroscopic studies were analyzed in different media. Fluorescence quantum yields (phi(F)) of 0.35 for ZnPc 1 and 0.30 for ZnPc 2 were calculated in N,N-dimethylformamide (DMF). The singlet molecular oxygen, O(2)((1)Delta(g)), production was evaluated using 9,10-dimethylanthracene (DMA) in DMF yielding values of Phi(Delta)= 0.56 for ZnPc 1 and 0.50 for ZnPc 2. In biological medium, the photodynamic effect was first evaluated in HRB cells. Both phthalocyanines produce similar photohemolysis of HRB cells, reaching values >90% of lysis after 5 min of irradiation with visible light. The photodynamic effect is accompanied by an increase in the membrane fluidity of HRB cells. However, these studies on E. coli cells showed that the cationic ZnPc 2 produces a higher photoinactivation of Gram-negative bacteria than ZnPc 1. Also, these results were established by stopped of growth curves for E. coli. Therefore the studies show that cationic ZnPc 2 is an efficient phototherapeutic agent with potential applications in tumor cell and Gram-negative bacteria inactivation by photodynamic therapy.     

Photodynamic inactivation of Escherichia coli by novel meso-substituted porphyrins by 4-(3-N,N,N-trimethylammoniumpropoxy)phenyl and 4-(trifluoromethyl)phenyl groups.

The photodynamic effect of novel cationic porphyrins, with different pattern of meso-substitution by 4-(3-N,N,N-trimethylammoniumpropoxy)phenyl (A) and 4-(trifluoromethyl)phenyl (B) groups, have been studied in both solution bearing photooxidizable substrates and in vitro on a typical Gram-negative bacterium Escherichia coli. In these sensitizers, the cationic groups are separated from the macrocycle ring by a propoxy spacer. Thus, the charges have a high mobility and a minimal influence on photophysical properties of the porphyrin. These compounds produce singlet molecular oxygen, O2(1Delta(g)), with quantum yields of approximately 0.41-0.53 in N,N-dimethylformamide. In methanol, the l-tryptophan photodecomposition increases with the number of cationic charges in the sensitizer. In vitro investigations show that cationic porphyrins are rapidly bound to E. coli cells in approximately 5 min. A higher binding was found for A3B3+ porphyrin, which is tightly bound to cells still after three washing steps. Photosensitized inactivation of E. coli cellular suspensions follows the order: A3B3+ > A44+> ABAB2+ > AB3+. Under these conditions, a negligible effect was found for 5,10,15,20-tetra(4-sulfonatophenyl)porphyrin (TPPS4(4-)) that characterizes an anionic sensitizer. Also, the results obtained for these new cationic porphyrins were compared with those of 5,10,15,20-tetra(4-N,N,N-trimethylammonium phenyl)porphyrin (TTAP4+), which is a standard active sensitizer established to eradicate E. coli. The photodynamic activity of TTAP4+ is quite similar to that produced by A4(4+). Studies in an anoxic condition indicate that oxygen is necessary for the mechanism of action of photodynamic inactivation of bacteria. The higher photodynamic activity of A3B3+ was confirmed by growth delay experiments. Photodynamic inactivation capacities of these sensitizers were also evaluated in E. coli cells immobilized on agar surfaces. Under these conditions, A3B3+ porphyrin retains a high activity to inactivate localized bacterial cells. Therefore, tricationic porphyrin A3B3+ is an interesting sensitizer with potential applications in photodynamic inactivation of bacteria in liquid suspensions or on surfaces.     

Synthesis and photodynamic activity of zinc(II) phthalocyanine derivatives bearing methoxy and trifluoromethylbenzyloxy substituents in homogeneous and biological media

Two zinc(II) phthalocyanines bearing either four methoxy (ZnPc 3) or trifluoromethylbenzyloxy (ZnPc 4) substituents have been synthesized by a two-step procedure starting from 4-nitrophthalonitrile. Absorption and fluorescence spectroscopic studies were analyzed in different media. These compounds are essentially non-aggregated in the organic solvent. Fluorescence quantum yields (phi(F)) of 0.26 for ZnPc 3 and 0.25 for ZnPc 4 were calculated in tetrahydrofuran (THF). The photodynamic activity of these compounds was compared in both THF containing photooxidizable substrates and in vitro on Hep-2 human larynx-carcinoma cell line. The production of singlet molecular oxygen, O(2)((1)Delta(g)), was determined using 9,10-dimethylanthracene yielding values of approximately 0.56 for both sensitizers. Under these conditions, the addition of beta-carotene (Car) suppresses the O(2)((1)Delta(g))-mediated photooxidation. In biological medium, no dark cytotoxicity was found for cells incubated with 0.1 microM of phthalocyanines 3 and 4 for 24 h. However, under similar conditions 0.5 microM of ZnPc 4 was toxic (70% cell survival). The uptake into Hep-2 cells was evaluated using 0.1muM of sensitizer, reaching values of approximately 0.05 nmol/10(6) cells after 3h of incubation at 37 degrees C. The cell survival after irradiation of the cultures with visible light was dependent upon both light exposure level and intracellular sensitizer concentration. A higher photocytotoxic effect was found for ZnPc 3 with respect to 4 (32%/70% cell survival after 15 min of irradiation). Also, these studies were performed treating the cells with 0.5 microM of ZnPc 3. In this case, an increase in the uptake (approximately 0.28 nmol/10(6) cells) was observed, which is accompanied by a higher photocytotoxic activity (20% cell survival). These results show that even though both sensitizer present similar photophysical properties in homogeneous medium, the photodynamic behavior in cellular media can significantly be changed.     

Proving the antimicrobial spectrum of an amphoteric surfactant-sol-gel coating: a food-borne pathogen study

An antimicrobial coating was evaluated in this work for its antimicrobial efficacy against common food-borne pathogens. Dodecyl-di(aminoethyl)-glycine, an organic disinfectant, was immobilized in a silicon oxide matrix to generate thin films over surfaces by means of the sol-gel process. Tetraethoxysilane was used as the polymeric precursor. No alteration of optical transparency on the covered surfaces was observed. Topographic images obtained with atomic force microscopy showed a homogeneous film with no additional roughness added by the polymer to the surface. The attenuated total reflectance-Fourier transform infrared spectral data showed the presence of dodecyl-di(aminoethyl)-glycine in the silicon oxide network after a normal cleaning procedure. The antimicrobial efficacy test was performed by exposing coated slides to suspensions of common food-borne pathogens: Escherichia coli, Staphyloccocus aureus, E. coli O157:H7, Salmonella typhi, S. cholerasuiss, Listeria innocua and L. monocytogenes. The coating activity was not only bacteriostatic but also bactericidal. The percent reduction of viable microorganism exposure over 24 h to the coated surface ranged between 99.5%, for the more resistant gram-positive bacteria, and over 99.999%, for most gram-negative bacteria. The silicon matrix itself did not account for any reduction of viable microbial, even more an increase was observed.     

Structural and spectroscopic characteristics of bacteriorhodopsin in air-water interface films

A suspension of purple membrane fragments in a solution of soya phosphatidyl-choline in hexane is spread at an air-water interface. Surface pressure and surface potential measurements indicate that the membrane fragments and lipids organize at the interface as an insoluble film. Electron microscopy of shadow-cast replicas of the film reveal that in the bacteriorhodopsin to soya PC weight ratio range of 2:1 to 10:1, these films consist of nonoverlapping membrane fragments which occupy approximately 35% of the surface area and are separated by a lipid monolayer. Furthermore, the membrane fragments are oriented with their intracellular surface towards the aqueous subphase. Nearly all the bacteriorhodopsin molecules at the interface are spectroscopically intact and exhibit visible spectral characteristics identical to those in aqueous suspensions of purple membrane and in intact bacteria. In addition, bacteriorhodopsin in air-dried interface films show spectral changes upon dark-adaptation and upon flash illumination similar to those observed in aqueous suspensions of purple membrane, but with slower kinetics. The kinetics of the spectral changes in interface films can be made nearly the same as in aqueous suspension by immersing the films in water.     

Fabrication and Characterization of Native and Oxidized Potato Starch Biodegradable Films

The need to replace conventional polymers due to environmental pollution caused by them has led to increased production of biodegradable polymers such as starch. Thus, the application possibilities of starch have increased. In this study, we produced and characterized biodegradable films derived from native and oxidized potato starch. The film-forming solution was prepared with different concentrations of extracted starch (native or oxidized) and a plasticizer (glycerol or sorbitol). Then, the mechanical, barrier, morphological, and structural properties of the films were characterized. The moisture content of the films varied from 15.35?±?1.31 to 21.78?±?0.49%. The elastic modulus of the films ranged from 219?±?14.97 to 2299?±?62.91 MPa. The film of oxidized starch plasticized with sorbitol in the lowest content was the most resistant and flexible; moreover, this film also presented lower water vapor permeability and low solubility in water. Fourier-transform infrared spectroscopic analysis of the biodegradable films indicated the presence of same functional groups as those of starch with bands in the same regions. The film thickness was lower for the films plasticized with glycerol whereas the color variation (Δ?) was lower for the ones plasticized with sorbitol. In case of both plasticizers, the increase in their content decreased the Δ? value. All the biodegradable films presented stability against water absorption owing to their low solubility in water. Morphological evaluation revealed the presence of partially gelatinized starch granules in the films. The roughness parameter (Rq) of the films varied from 3.39 to 10.9 nm, indicating that their surfaces are smooth. X-ray diffraction studies showed a B-type pattern for the starches, which is representative of tubers. Further, the films present higher relative crystallinity (RC) compared to the starches. The biodegradable starch films are uniform, transparent and with low solubility in water. The oxidation of starch and use of sorbitol as a plasticizer resulted in improved properties of the starch films, which is suitable for application.     

An effective calibration technique for radiochromic films using a single-shot dose distribution in Gamma Knife®

PurposeA method of calibrating radiochromic films for Gamma Knife^® (GK) dosimetry was developed. The applicability and accuracy of the new method were examined.MethodsThe dose distribution for a sixteen millimeter single-shot from a GK was built using a reference film that was calibrated using the conventional multi-film calibration (MFC) method. Another film, the test film, from a different set of films was irradiated under the same conditions as the reference film. The calibration curve for the second set of films was obtained by assigning the dose distribution of the reference film to the optical density of the test film, point by point. To assess the accuracy of this single-film calibration (SFC) method, differences between gamma index pass rates (GIPRs) were calculated.ResultsThe SFC curves were successfully obtained with estimated errors of 1.46%. GIPRs obtained with the SFC method for films irradiated using a single-shot showed differences less than one percentage point when dose difference criterion (ΔD) was 2% and the distance to agreement criterion (Δd) was 1 mm. The GIPRs of the SFC method when the films were irradiated following a virtual target treatment plan were consistent with the GIPRs of the MFC method, with differences of less than 0.2 percentage points for ΔD = 1% and Δd = 1 mm.ConclusionThe accuracy of the SFC method is comparable to that of conventional multi-film calibration method for GK film dosimetry.     

The modification of enzyme electrode properties with non-conducting electropolymerised films

Phenol and several phenol derivatives have been electropolymerised on to platinum anodes. The selective properties of the modified electrodes were dependent on the final polymeric structure. Although essentially non-conducting, dual phenolic films could be deposited on electrode surfaces. This was achieved by the initial deposition of a porous polymer formed from, phenol red, followed by the more diffusion limiting film of oxidised phenol. The resulting composite film showed the combined selective characteristics of the two component polymers. Attempts to enhance polymeric film selectivity via the incorporation of charged or neutral surfactants are outlined. The characteristics of glucose oxidase incorporated into (poly)phenol films are discussed.     

Folic acid modified gelatine coated quantum dots as potential reagents for in vitro cancer diagnostics

Background

Highly hydrophobic surfaces can have very low surface energy and such low surface energy biological interfaces can be obtained using fluorinated coatings on surfaces. Deposition of biocompatible organic films on solid-state surfaces is attained with techniques like plasma polymerization, biomineralization and chemical vapor deposition. All these require special equipment or harsh chemicals. This paper presents a simple vapor-phase approach to directly coat solid-state surfaces with biocompatible films without any harsh chemical or plasma treatment. Hydrophilic and hydrophobic monomers were used for reaction and deposition of nanolayer films. The monomers were characterized and showed a very consistent coating of 3D micropore structures.

Results

The coating showed nano-textured surface morphology which can aid cell growth and provide rich molecular functionalization. The surface properties of the obtained film were regulated by varying monomer concentrations, reaction time and the vacuum pressure in a simple reaction chamber. Films were characterized by contact angle analysis for surface energy and with profilometer to measure the thickness. Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed the chemical composition of the coated films. Variations in the FTIR results with respect to different concentrations of monomers showed the chemical composition of the resulting films.

Conclusion

The presented approach of vapor-phase coating of solid-state structures is important and applicable in many areas of bio-nano interface development. The exposure of coatings to the solutions of different pH showed the stability of the coatings in chemical surroundings. The organic nanocoating of films can be used in bio-implants and many medical devices.