Specificity studies on retroviral proteinase from myeloblastosis-associated virus.

The specificity of the p15 proteinase of myeloblastosis-associated virus (MAV) was tested with nonviral high molecular weight substrates and with synthetic peptides. Peptides with sequences spanning known cleavage sites in viral polyproteins of Rous sarcoma virus (RSV) and avian leukemia viruses, as well as in BSA and HSA, were synthesized, and the rate of their cleavage by the MAV proteinase was compared. Synthetic peptides require for successful cleavage at least 4 residues at the N-terminal side and 3 residues at the C-terminal side. The proteinase shows a preference for hydrophobic residues with bulky side chains (Met, Tyr, Phe) in P3, although Arg and Gln can also be accepted. Small hydrophobic residues are required in P2 and P2', and large hydrophobic residues (Tyr, Met, Phe/p-nitro-Phe) are preferred in both P1 and P1'. The difference between the specificity of the p15 proteinase and that of the HIV-1 proteinase mostly pertains to position P2' of the substrate, where bulkier side chains are accepted by the HIV-1 proteinase (Richards et al., 1990). A good chromogenic substrate for the MAV and RSV proteinases was developed and used to further characterize the MAV proteinase activity with respect to ionic strength and pH. The activity of the proteinase is strongly dependent on ionic strength and pH. Both the kcat and Km values contribute to a higher cleavage efficiency at higher salt concentrations and show a bell-shaped pH dependence curve with a sharp maximum at pH 5.5 (kcat) and 6.5 (Km).     

Probing the substrate specificity of the dengue virus type 2 NS3 serine protease by using internally quenched fluorescent peptides

The NS3 (dengue virus non-structural protein 3) serine protease of dengue virus is an essential component for virus maturation, thus representing an attractive target for the development of antiviral drugs directed at the inhibition of polyprotein processing. In the present study, we have investigated determinants of substrate specificity of the dengue virus NS3 protease by using internally quenched fluorogenic peptides containing Abz (o-aminobenzoic acid; synonymous to anthranilic acid) and 3-nitrotyrosine (nY) representing both native and chimaeric polyprotein cleavage site sequences. By using this combinatorial approach, we were able to describe the substrate preferences and determinants of specificity for the dengue virus NS2B(H)-NS3pro protease. Kinetic parameters (kcat/K(m)) for the hydrolysis of peptide substrates with systematic truncations at the prime and non-prime side revealed a length preference for peptides spanning the P4-P3' residues, and the peptide Abz-RRRRSAGnY-amide based on the dengue virus capsid protein processing site was discovered as a novel and efficient substrate of the NS3 protease (kcat/K(m)=11087 M(-1) x s(-1)). Thus, while having confirmed the exclusive preference of the NS3 protease for basic residues at the P1 and P2 positions, we have also shown that the presence of basic amino acids at the P3 and P4 positions is a major specificity-determining feature of the dengue virus NS3 protease. Investigation of the substrate peptide Abz-KKQRAGVLnY-amide based on the NS2B/NS3 polyprotein cleavage site demonstrated an unexpected high degree of cleavage efficiency. Chimaeric peptides with combinations of prime and non-prime sequences spanning the P4-P4' positions of all five native polyprotein cleavage sites revealed a preponderant effect of non-prime side residues on the K(m) values, whereas variations at the prime side sequences had higher impact on kcat.     

Synthetic peptides and fluorogenic substrates related to the reactive site sequence of Kunitz-type inhibitors isolated from Bauhinia: interaction with human plasma kallikrein

We have previously described Kunitz-type serine proteinase inhibitors purified from Bauhinia seeds. Human plasma kallikrein shows different susceptibility to those inhibitors. In this communication, we describe the interaction of human plasma kallikrein with fluorogenic and non-fluorogenic peptides based on the Bauhinia inhibitors' reactive site. The hydrolysis of the substrate based on the B. variegata inhibitor reactive site sequence, Abz-VVISALPRSVFIQ-EDDnp (Km 1.42 microM, kcat 0.06 s(-1), and kcat/Km 4.23 x 10(4) M(-1) s(-1)), is more favorable than that of Abz-VMIAALPRTMFIQ-EDDnp, related to the B. ungulata sequence (Km 0.43 microM, kcat 0.00017 s(-1), and kcat/Km 3.9 x 10(2) M(-1) s(-1)). Human plasma kallikrein does not hydrolyze the substrates Abz-RPGLPVRFESPL-EDDnp and Abz-FESPLRINIIKE-EDDnp based on the B. bauhinioides inhibitor reactive site sequence, the most effective inhibitor of the enzyme. These peptides are competitive inhibitors with Ki values in the nM range. The synthetic peptide containing 19 amino acids based on the B. bauhinioides inhibitor reactive site (RPGLPVRFESPL) is poorly cleaved by kallikrein. The given substrates are highly specific for trypsin and chymotrypsin hydrolysis. Other serine proteinases such as factor Xa, factor XII, thrombin and plasmin do not hydrolyze B. bauhinioides inhibitor related substrates.     

Human complement proteins D, C2, and B. Active site mapping with peptide thioester substrates

The specificity and reactivity of complement serine proteases D, B, Bb, C2, and C2a were determined using a series of peptide thioester substrates. The rates of thioester hydrolysis were measured using assay mixtures containing the thiol reagent 4,4'-dithiodipyridine at pH 7.5. Each substrate contained a P1 arginine residue, and the effect of various groups and amino acids in the P2, P3, P4, and P5 positions was determined using kcat/Km values to compare reactivities. Among peptide thioesters corresponding to the activation site sequence in B, dipeptide thioesters containing a P2 lysine residue were the best substrates for D. Extending the chain to include a P3 or P4 amino acid resulted in loss of activity, and neither the tripeptide nor the tetrapeptide containing the cleavage sequence of B was hydrolyzed. Overall, D cleaved fewer substrates and was 2-3 orders of magnitude less reactive than C1s against some thioester substrates. C2 and fragment C2a had comparable reactivities and hydrolyzed peptides containing Leu-Ala-Arg and Leu-Gly-Arg, which have the same sequence as the cleavage sites of C3 and C5, respectively. The best substrates for C2 and C2a were Z-Gly-Leu-Ala-Arg-SBzl and Z-Leu-Gly-Leu-Ala-Arg-SBzl, respectively, where Bzl is benzyl. B was the least reactive among these complement enzymes. The best substrate for B was Z-Lys-Arg-SBzl with a kcat/Km value of 1370 M-1 s-1. The catalytic fragment of B, Bb, had higher activity toward these peptide thioester substrates. The best substrate for Bb was Z-Gly-Leu-Ala-Arg-SBzl with a kcat/Km similar to C2a and 10 times higher than the value for B. Both C2a and Bb were considerably more reactive against C3-like than C5-like substrates. Bovine trypsin hydrolyzed thioester substrates with kcat/Km approximately 10(3) higher than the complement enzymes. These thioester substrates for D, B, and C2 should be quite useful in kinetic and active site studies of the purified enzymes.     

The purification and properties of yeast proteinase B from Candida albicans.

A serine proteinase (ycaB) from the yeast Candida albicans A.T.C.C. 10261 was purified to near homogeneity. The enzyme was almost indistinguishable from yeast proteinase B (EC 3.4.21.48), and an Mr of 30,000 for the proteinase was determined by SDS/polyacrylamide-gel electrophoresis. The initial site of hydrolysis of the oxidized B-chain of insulin, by the purified proteinase, was the Leu-Tyr peptide bond. The preferential degradation at this site, analysed further with N-blocked amino acid ester and amide substrates, demonstrated that the specificity of the proteinase is determined by an extended substrate-binding site, consisting of at least three subsites (S1, S2 and S'1). The best p-nitrophenyl ester substrates were benzyloxycarbonyl-Tyr p-nitrophenyl ester (kcat./Km 3,536,000 M-1 X S-1), benzyloxycarbonyl-Leu p-nitrophenyl ester (kcat./Km 2,250,000 M-1 X S-1) and benzyloxycarbonyl-Phe p-nitrophenyl ester (kcat./Km 1,000,000 M-1 X S-1) consistent with a preference for aliphatic or aromatic amino acids at subsite S1. The specificity for benzyloxycarbonyl-Tyr p-nitrophenyl ester probably reflects the binding of the p-nitrophenyl group in subsite S'1. The presence of S2 was demonstrated by comparison of the proteolytic coefficients (kcat./Km) for benzyloxycarbonyl-Ala p-nitrophenyl ester (825,000 M-1 X S-1) and t-butyloxycarbonyl-Ala p-nitrophenyl ester (333,000 M-1 X S-1). Cell-free extracts contain a heat-stable inhibitor of the proteinase.     

Enzyme-substrate interactions in the hydrolysis of peptide substrates by thermitase, subtilisin BPN', and proteinase K

Peptide substrates of the general structure acetyl-Alan (n = 2-5), acetyl-Pro-Ala-Pro-Phe-Alan-NH2 (n = 0-3), and acetyl-Pro-Ala-Pro-Phe-AA-NH2 (AA = various amino acids) were synthesized and used to investigate the enzyme-substrate interactions of the microbial serine proteases thermitase, subtilisin BPN', and proteinase K on the C-terminal side of the scissile bond. The elongation of the substrate peptide chain up to the second amino acid on the C-terminal side (P'2) enhances the hydrolysis rate of thermitase and subtilisin BPN', whereas for proteinase K an additional interaction with the third amino acid (P'3) is possible. The enzyme subsite S'1 specificity of the proteases investigated is very similar. With respect to kcat/Km values small amino acid residues such as Ala and Gly are favored in this position. Bulky residues such as Phe and Leu were hydrolyzed to a lower extent. Proline in P'1 abolishes the hydrolysis of the substrates. Enzyme-substrate interactions on the C-terminal side of the scissile bond appear to affect kcat more than Km for all three enzymes.     

Aspartic acid 405 contributes to the substrate specificity of aminopeptidase B

Aminopeptidase B (EC 3.4.11.6, ApB) specifically cleaves in vitro the N-terminal Arg or Lys residue from peptides and synthetic derivatives. Ap B was shown to have a consensus sequence found in the metallopeptidase family. We determined the putative zinc binding residues (His324, His328, and Glu347) and the essential Glu325 residue for the enzyme using site-directed mutagenesis (Fukasawa, K. M., et al. (1999) Biochem. J. 339, 497-502). To identify the residues binding to the amino-terminal basic amino acid of the substrate, rat cDNA encoding ApB was cloned into pGEX-4T-3 so that recombinant protein was expressed as a GST fusion protein. Twelve acidic amino acid residues (Glu or Asp) in ApB were replaced with a Gln or Asn using site-directed mutagenesis. These mutants were isolated to characterize the kinetic parameters of enzyme activity toward Arg-NA and compare them to those of the wild-type ApB. The catalytic efficiency (kcat/Km) of the mutant D405N was 1.7 x 10(4) M(-1) s(-1), markedly decreased compared with that of the wild-type ApB (6.2 x 10(5) M(-1) s(-1)). The replacement of Asp405 with an Asn residue resulted in the change of substrate specificity such that the specific activity of the mutant D405N toward Lys-NA was twice that toward Arg-NA (in the case of wild-type ApB; 0.4). Moreover, when Asp405 was replaced with an Ala residue, the kcat/Km ratio was 1000-fold lower than that of the wild-type ApB for hydrolysis of Arg-NA; in contrast, in the hydrolysis of Tyr-NA, the kcat/Km ratios of the wild-type (1.1 x 10(4) M(-1) s(-1)) and the mutated (8.2 x 10(3) M(-1) s(-1)) enzymes were similar. Furthermore, the replacement of Asp-405 with a Glu residue led to the reduction of the kcat/Km ratio for the hydrolysis of Arg-NA by a factor of 6 and an increase of that for the hydrolysis of Lys-NA. Then the kcat/Km ratio of the D405E mutant for the hydrolysis of Lys-NA was higher than that for the hydrolysis of Arg-NA as opposed to that of wild-type ApB. These data strongly suggest that the Asp 405 residue is involved in substrate binding via an interaction with the P1 amino group of the substrate's side chain.     

Effects of secondary interactions on the kinetics of peptide and peptide ester hydrolysis by tissue kallikrein and trypsin

Kinetic constants for the hydrolysis by porcine tissue beta-kallikrein B and by bovine trypsin of a number of peptides related to the sequence of kininogen (also one containing a P2 glycine residue instead of phenylalanine) and of a series of corresponding arginyl peptide esters with various apolar P2 residues have been determined under strictly comparative conditions. kcat and kcat/Km values for the hydrolysis of the Arg-Ser bonds of the peptides by trypsin are conspicuously high. kcat for the best of the peptide substrates, Ac-Phe-Arg-Ser-Val-NH2, even reaches kcat for the corresponding methyl ester, indicating rate-limiting deacylation also in the hydrolysis of a peptide bond by this enzyme. kcat/Km for the hydrolysis of the peptide esters with different nonpolar L-amino acids in P2 is remarkably constant (range 1.7), as it is for the pair of the above pentapeptides with P2 glycine or phenylalanine. kcat for the ester substrates varies fivefold, however, being greatest for the P2 glycine compounds. Obviously, an increased potential of a P2 residue for interactions with the enzyme lowers the rate of deacylation. In contrast to results obtained with chymotrypsin and pancreatic elastase, trypsin is well able to tolerate a P3 proline residue. In the hydrolysis of peptide esters, tissue kallikrein is definitely superior to trypsin. Conversely, peptide bonds are hydrolyzed less efficiently by tissue kallikrein and the acylation reaction is rate-limiting. The influence of the length of peptide substrates is similar in both enzymes and indicates an extension of the substrate recognition site from subsite S3 to at least S'3 of tissue kallikrein and the importance of a hydrogen bond between the P3 carbonyl group and Gly-216 of the enzymes. Tissue kallikrein also tolerates a P3 proline residue well. In sharp contrast to the behaviour of trypsin is the very strong influence of the P2 residue in tissue-kallikrein-catalyzed reactions. kcat/Km varies 75-fold in the series of the dipeptide esters with nonpolar L-amino acid residues in P2, a P2 glycine residue furnishing the worst and phenylalanine the best substrate, whereas this exchange in the pentapeptides changes kcat/Km as much as 730-fold. This behaviour, together with the high value of kcat/Km for Ac-Phe-Arg-OMe of 3.75 X 10(7) M-1 s-1, suggests rate-limiting binding (k1) in the hydrolysis of the best ester substrates.(ABSTRACT TRUNCATED AT 400 WORDS)     

Substrate specificity of human cathepsin D using internally quenched fluorescent peptides derived from reactive site loop of kallistatin

Kallistatin, a serpin that specifically inhibits human tissue kallikrein, was demonstrated to be cleaved at the Phe-Phe bond in its reactive site loop (RSL) by cathepsin D. Internally quenched fluorescent peptides containing the amino acid sequence of kallistatin RSL were highly susceptible to hydrolysis by cathepsin D. Surprisingly, these peptides were efficiently hydrolyzed at Phe-Phe bond, despite having Lys and Ser at P2 and P2' positions, respectively, which was reported to be very unfavorable for substrates for cathepsin D. Due to the importance of cathepsin D in several physiological and pathological processes, we took the peptide containing kallistatin RSL sequence, Abz-Ala-Ile-Lys-Phe-Phe-Ser-Arg-Gln-EDDnp, as a reference substrate for a systematic specificity study of S3 to S3' protease subsites (EDDnp=N-[2,4-dinitrophenyl]-ethylenediamine and Abz=ortho-amino benzoic acid). We present in this paper some internally quenched fluorescent peptides that were efficient substrates for cathepsin D. They essentially differ from other previously described substrates by their higher kcat/Km values due, mainly, to low Km values, such as the substrate Abz-Ala-Ile-Ala-Phe-Phe-Ser-Arg-Gln-EDDnp (Km=0.27 microM, kcat=16.25 s(-1), kcat/Km=60185 microM(-1) x s(-1)).     

The complement component C1s catalysed hydrolysis of peptide 4-nitroanilide substrates

The kinetic parameter kcat/Km has been determined for the hydrolysis of peptide 4-nitroanilides, catalysed by complement component C1s. Substrates based on the C-terminal sequence of human C4a (Leu-Gln-Arg) were synthesised. Replacement of the glutamine residue by glycine or serine increased kcat/Km. Substitution of valine for the leucine residue increased kcat/Km, while substitution of glycine or lysine for the leucine residue decreased kcat/Km slightly. D-Val-Ser-Arg 4-nitroanilide is the most reactive 4-nitroanilide substrate towards C1s, so far. These results are discussed in relation to the amino acid sequences near the bonds cleaved by C1s in C4, C2 and C1 inhibitor.     

Schistosoma mansoni: purification and characterization of the major acidic proteinase from adult worms

We report purification of the major digestive proteinase from adult worms of Schistosoma mansoni. This enzyme is a thiol proteinase with a pH optimum of 5 and is activated by thiol reagents. It was purified 300-fold using a combination of gel chromatography and chromatofocusing. It readily hydrolyzed hemoglobin with an apparent Km of 0.29 microM and a specific activity of 27 micrograms degraded/min/mg enzyme at 37 C. Peptides with positively charged amino acids were preferentially cleaved. The enzyme degraded Boc-Arg-Arg-7-amino-4-methyl coumarin with a kcat/Km of 9083 M-1 sec-1. Lengthening the peptide chain to 3 amino acids or substituting glycine for the amino terminal arginine resulted in decreased activity. The enzyme was inhibited by chloromethylketone-derivatized peptides of similar sequence and by leupeptin. The purified proteinase exhibits microheterogeneity in different preparations with forms ranging in molecular weight from 30,000 to 35,000, and pI 5.7-6.0.     

Substrate requirements of human rhinovirus 3C protease for peptide cleavage in vitro

A series of synthetic peptides representing authentic proteolytic cleavage sites of human rhinovirus type 14 were assayed as substrates for purified 3C protease. Competition cleavage assays were employed to determine the relative specificity constants (Kcat/Km) for substrates with sequences related to the viral 2C-3A cleavage site. Variable length peptides representing the 2C-3A cleavage site were cleaved with comparable efficiency. These studies defined a minimum substrate of 6 amino acids (TLFQ/GP), although retention of the residue at position P5 (ETLFQ/GP) resulted in a better substrate by an order of magnitude. Amino acid substitutions at position P5, P4, P1', or P2' indicated that the identity of the residue at position P5 was not critical, whereas substitutions at position P4, P1' or P2' resulted in substrates with Kcat/Km values varying over 2 orders of magnitude. In contrast to the 2C-3A cleavage site, small peptide derivatives representative of the 3A-3B cleavage site were relatively poor substrates, which suggested that residues flanking the minimum core sequence may influence susceptibility to cleavage. The 3C protease of rhinovirus type 14 was also capable of cleaving peptides representing comparable cleavage sites predicted for coxsackie B virus and poliovirus.     

Substrate specificity of human fibroblast stromelysin. Hydrolysis of substance P and its analogues

To probe the substrate specificity of the human metalloproteinase stromelysin (SLN), we determined values of kc/Km for the SLN-catalyzed hydrolysis of substance P (Arg-Pro-Lys-Pro-Gln-Gln-Phe-Phe-Gly-Leu-MetNH2; SP; kc/Km = 1790 +/- 140 M-1 s-1), 15 analogues of SP, and 17 other peptides. We found a remarkably narrow substrate specificity for SLN: while SP and its analogues could serve as substrates for SLN (hydrolysis occurred exclusively at the Gln6-Phe7 bond), peptides that were not direct analogues could not (kc/Km less than 3 M-1 s-1). From the study of the SLN-catalyzed hydrolysis of SP and its analogues, the following findings emerged: (1) Decreasing the length of SP results in decreases in kc/Km. (2) Conservative amino acid replacements near the scissle bond of SP decrease kc/Km. (3) The SP analogue in which Gly9 is replaced with sarcosine (N-methylglycine) is not hydrolyzed by SLN (kc/Km less than 3 M-1 s-1). (4) Several SP analogues that are not hydrolyzed by SLN are inhibitors of the enzyme. The complexes formed from interaction of SLN with these peptides have dissociation constants that are similar to the Km value for the complex of SLN and SP. Combined, these results suggest that SLN uses the energy that is available from favorable interactions with its substrate to stabilize catalytic transition states but not the Michaelis complex or other stable-state complexes.     

Comparative enzymatic studies of human renin acting on pure natural or synthetic substrates

Some of the essential structural requirements for the enzymatic reaction of pure human renin acting on pure human and rat angiotensinogen and on their synthetic tetradecapeptide substrates were investigated. The five carboxy terminal amino acids of synthetic tetradecapeptides played a significant role in substrate recognition and/or hydrolysis by human renin. Kinetic constants Km, Kcat and kcat/Km of the various human renin assays were different according to the substrate used. The presence of either an asparagine or a threonine residue in the S'4 renin subsite did not affect significantly the kinetic constant values. A tyrosine residue, rather than a histidine residue, in the S'3 renin subsite gave the best synthetic substrate studied. When tyrosine residue was present in the S'2 renin subsite an important decrease in kcat was observed. Human angiotensinogen was hydrolysed by human renin with lower Km and kcat values than those measured with human and porcine synthetic substrates, suggesting that the 3-dimensional structure of human angiotensinogen plays a key role in the hydrolysis. This finding was supported by assays performed with rat angiotensinogen, which was cleared by human renin with the same kcat value as rat tetradecapeptide, but with a 49-fold lower Km. Between human and rat angiotensinogen a kcat/Km value of only 2-fold higher has been found in the renin assay using human substrate.     

Substrate specificity of recombinant dengue 2 virus NS2B-NS3 protease: influence of natural and unnatural basic amino acids on hydrolysis of synthetic fluorescent substrates

A recombinant dengue 2 virus NS2B-NS3 protease (NS means non-structural virus protein) was compared with human furin for the capacity to process short peptide substrates corresponding to seven native substrate cleavage sites in the dengue viral polyprotein. Using fluorescence resonance energy transfer peptides to measure kinetics, the processing of these substrates was found to be selective for the Dengue protease. Substrates containing two or three basic amino acids (Arg or Lys) in tandem were found to be the best, with Abz-AKRRSQ-EDDnp being the most efficiently cleaved. The hydrolysis of dipeptide substrates Bz-X-Arg-MCA where X is a non-natural basic amino acid were also kinetically examined, the best substrates containing aliphatic basic amino acids. Our results indicated that proteolytic processing by dengue NS3 protease, tethered to its activating NS2B co-factor, was strongly inhibited by Ca2+ and kosmotropic salts of the Hofmeister's series, and significantly influenced by substrate modifications between S4 and S6'. Incorporation of basic non-natural amino acids in short peptide substrates had significant but differential effects on Km and k(cat), suggesting that further dissection of their influences on substrate affinity might enable the development of effective dengue protease inhibitors.     

Analysis of subsite preferences of HIV-1 proteinase using MA/CA junction peptides substituted at the P3-P1' positions

The residues P3, P2, P1, and P1' of a peptide corresponding to the matrix/capsid protein junction in the HIV-1 gag protein (Ser-Gln-Asn-Tyr-Pro-Ile-Val) were systematically replaced and the effect of these single amino acid substitutions on the hydrolysis of each peptide by HIV-1 proteinase was studied. Subsites S1 and S1' of the enzyme showed explicit preference for hydrophobic moieties, but beta-branched amino acids and proline are not tolerated in S1. The S2 subsite shows a preference for small polar and apolar amino acids; it may be occupied by Asn, Asp, Glu, Cys, Ala, or Val, other substitutions, especially by Gln and Ser, prevent hydrolysis of the peptides. In subsite S3 all amino acids except proline can be accommodated.     

Sequence specificity of human skin fibroblast collagenase. Evidence for the role of collagen structure in determining the collagenase cleavage site

The sequence specificity of human skin fibroblast collagenase has been investigated by measuring the rate of hydrolysis of 16 synthetic octapeptides covering the P4 through P4' subsites of the substrate. The choice of peptides was patterned after potential collagenase cleavage sites (those containing either the Gly-Leu-Ala or Gly-Ile-Ala sequences) found in types I, II, and III collagens. The initial rate of hydrolysis of the P1-P1' bond of each peptide has been measured by quantitating the concentration of amino groups produced upon cleavage after reaction with fluorescamine. The reactions have been carried out under first-order conditions ([S] much less than KM) and kcat/KM values have been calculated from the initial rates. The amino acids in subsites P3 (Pro, Ala, Leu, or Asn), P2 (Gln, Leu, Hyp, Arg, Asp, or Val), P1' (Ile or Leu), and P4' (Gln, Thr, His, Ala, or Pro) all influence the hydrolysis rates. However, the differences in the relative rates observed for these octapeptides cannot in themselves explain why fibroblast collagenase hydrolyzes only the Gly-Leu and Gly-Ile bonds found at the cleavage site of native collagens. This supports the notion that the local structure of collagen is important in determining the location of the mammalian collagenase cleavage site.     

Substrate specificity of the Escherichia coli outer membrane protease OmpT

OmpT is a surface protease of gram-negative bacteria that has been shown to cleave antimicrobial peptides, activate human plasminogen, and degrade some recombinant heterologous proteins. We have analyzed the substrate specificity of OmpT by two complementary substrate filamentous phage display methods: (i) in situ cleavage of phage that display protease-susceptible peptides by Escherichia coli expressing OmpT and (ii) in vitro cleavage of phage-displayed peptides using purified enzyme. Consistent with previous reports, OmpT was found to exhibit a virtual requirement for Arg in the P1 position and a slightly less stringent preference for this residue in the P1' position (P1 and P1' are the residues immediately prior to and following the scissile bond). Lys, Gly, and Val were also found in the P1' position. The most common residues in the P2' position were Val or Ala, and the P3 and P4 positions exhibited a preference for Trp or Arg. Synthetic peptides based upon sequences selected by bacteriophage display were cleaved very efficiently, with kcat/Km values up to 7.3 x 10(6) M(-1) s(-1). In contrast, a peptide corresponding to the cleavage site of human plasminogen was hydrolyzed with a kcat/Km almost 10(6)-fold lower. Overall, the results presented in this work indicate that in addition to the P1 and P1' positions, additional amino acids within a six-residue window (between P4 and P2') contribute to the binding of substrate polypeptides to the OmpT binding site.     

Substrate specificity of alkaline serine proteinase isolated from photosynthetic bacterium,Rubrivivax gelatinosus KDDS1

A novel type of fluorescence resonance energy transfer (FRET) combinatorial libraries were used for the characterization of alkaline serine proteinase produced from Rubrivivax gelatinosus KDDS1. This enzyme was the first serine proteinase characterized from photosynthetic bacteria. The proteinase was found to prefer Met and Phe at the P1 position, Ile and Lys at the P2 position, and Arg and Phe at the P3 position. To date, no serine proteinase has exhibited a preference for Met at the P1 position. Thus, the alkaline serine proteinase from R. gelatinosus KDDS1 is very unique in terms of substrate specificity. A highly sensitive substrate, Boc-Arg-Ile-Met-MCA, was synthesized for kinetic study based on the results reported here. The optimum pH of the enzyme for this substrate was pH 10.7, and the values of kcat, Km, and kcat/Km were 23.7 s(-1), 15.4 microM, and 1.54 microM(-1) s(-1), respectively.