Indoor environmental study and post occupancy evaluation in an office environment

1. 1. The objective of this paper is to investigate the indoor environment from the viewpoint of interaction between physical environment and the human responses. The field survey has been conducted over 1 year.

2. 2. A continuous measurement has been carried out for 1 week and distribution of variables have been measured for 1 day.

3. 3. The attitude of workers was investigated by a questionnaire.

4. 4. As the result, average luminance represented more than 1000 lx in the new building, in contrast with less tha 300 lx in the existing building.

5. 5. There was a significant difference of the occupants' response to the light environment between the two buildings.

6. 6. Measured thermal conditions are on the edge of the ASHRAE comfort envelope in summer, and in the neighborhood of the lower dry limit of the envelope in spring.

7. 7. The occupants' evaluations were remarkably changed before and after the moving. The office environment is better than that of the factory.

A procedure for evaluation of the indoor environment

Exposure to substances found in the indoor environment is known totrigger respiratory illnesses such as asthma. Despite this knowledge,information on how to identify and remove these exposures is scarce. Toaddress this issue, we describe a program of environmental assessmentdeveloped at Children's Mercy Hospital in Kansas City, Missouri. Weevaluated buildings using a standardized assessment protocol. Thisprotocol included a combination of background information, visualinspection, volumetric air sampling, bulk sampling of suspicious areas,antigen measurement of housedust, and general measurements of the indoorclimate. We inspected a total of 63 buildings including 49 single unitstructures, 4 apartments, 4 town homes, 3 schools, 2 office buildings,and 1 mobile home. Most of these locations were identified because ofrespiratory ailments reported by the occupants. A screeningquestionnaire revealed factors that are known to be associated withfungal contamination such as leaks or flooding in 78% of thebuildings. Visual inspection confirmed these sources of contamination inthe majority of structures. Volumetric air sampling identified a highproportion of buildings with airborneAspergillus/Penicillium species. Stachybotrys wasfound in nearly 30% of these structures both in air and onsurface samples, and surprisingly, Stachybotrys spores werefound only in air in nearly 20%. Climactic factors were onlyweakly associated with fungal contamination. The homes of patients withrespiratory diseases often have significant fungal contamination thatcan be identified with a questionnaire. Using this standardizedapproach, factors associated with respiratory illnesses, usually fungalcontamination, frequently can be identified. Whether removal of theoffending exposure will lead to improve health remains to bedetermined.     

Investigations on the surveys of office environments and the total evaluation method—IAQ-Index

1. 1. A comprehensive study was made to establish evaluation methods for better office environments.

2. 2. In our study, measurements of thermal, acoustic, lighting, airflow and air quality conditions in indoor environments were made as well as questionnaire to the occupants on the evaluations of indoor environments and the feeling of fatigue.

3. 3. We also made an attempt to rate the evaluation value based on concepts and standards to evaluate totally office environments in a view point of “the office environments where people can work healthy and vigorously”. The evaluation values were called IAQ-index.

A survey of airborne algae and cyanobacteria within the indoor environment of an office building in Kuala Lumpur,Malaysia

This study investigates the occurrence of airborne algae and cyanobacteria (AAC) within the indoor environment of an office building in Kuala Lumpur, Malaysia. Samples of air, wall scrapings and soils of potted plants were collected from various sites within the building and surrounding areas. In addition, AAC were collected by exposing a culture medium to the indoor air. Based on the cultured material, 14 taxa of AAC consisting of cyanobacteria such as Phormidium angustissima and Chroococcus minor and chlorophytes such as Chlorella vulgaris and Chlorococcum humicola were recorded. The surrounding areas of the building recorded the highest occurrence (75%) of AAC. Within the building, the highest occurrence of AAC (45%) was recorded on the lower ground floor, an area exposed to the outdoor environment. Some of the AAC recorded were also detected in the wall scraping and soil samples. Areas with heavy human movement appeared to have high occurrence of AAC. Human movement appeared to be an important factor in affecting the dispersal of the AAC.     

Criteria for a comfortable indoor environment in buildings

1. 1. The major purpose of buildings is to provide a healthy and comfortable environment for occupants.

2. 2. The indoor environment is a complex system including factors like thermal, visual and acoustic conditions, indoor air quality, electromagnetic fields, static electricity and vibration.

3. 3. To obtain an indoor environment that is acceptable in terms of health as well as comfort, criteria for these factors need to be established.

4. 4. The present paper gives an overview of the criteria recommended in current existing standards and guidelines.

5. 5. As most studies to date have focussed on thermal conditions and indoor air quality, these two factors are described in more detail.

Relationship between cerebrovascular disease and indoor thermal environment in two selected towns in Miyagi Prefecture, Japan

1. 1. This paper describes the results of an investigation of the relationship between mortality from cerebrovascular disease (hereafter called stroke) and the indoor thermal environment in two selected towns with different socioeconomic compositions: Shiwahime, an agricultura town with relatively high stroke mortality, and Karakuwa, a fishing town with relatively low stroke mortality, using a case-control research design.

2. 2. The measurement of the indoor thermal environments were conducted and the surveyed with a questionnaire during the winter of 1986.

3. 3. The findings are summarized as detailed below.

4. 4. Room temperatures in the control households were generally higher than those in the case households by up to 1.3°C.

5. 5. The thermal conditions of the housing in the case households were a little inferior to those in the control households.

6. 6. Despite much lower room temperatures than the so-called comfort temperature, members of both the case and the control households did not express feelings of being cold in the rooms.

7. 7. It is concluded, including the survey results from other literature, that improvements in the indoor thermal environment should receive more attention with respect of the reduction in stroke mortality, particularly in areas of cold climates.

Dustborne fungi in large office buildings

Fungi are ubiquitous in our daily environments. However, their effects on office workers' health are of great interest to many environmental health researchers. Dust has been considered an important reservoir of indoor fungi from which aerosolization and exposure could occur. We have examined the characteristics of dustborne fungal populations recovered from floors and chairs in office buildings. We investigated twenty-one offices in four office buildings in Boston, MA over a year beginning May 1997. We conducted intensive environmental sampling every six weeks to measure culturable dustborne fungi from floors and chairs, surface dust levels and water activity in carpeting. Carbon dioxide, temperature, and relative humidity were monitored continuously. Concentrations of total dustborne fungi recovered from floors were positively related to carbon dioxide ( = 0.00064; p-value = 0.0002) and temperatures between 20 and 22.5 °C (p-value = 0.0026). Also, total fungal concentrations in floors gradually increased over the year (p-value = 0.0028). Total fungi recovered from chairs varied significantly by season (p-value < 0.0001),highest in September and lowest in March, and were positively correlated with dust loads in floors ( = 0.25; p-value < 0.0001). We used principal component analysis (PCA) to reduce various observed fungal species to fewer factors. Six groups(PCA factors) were obtained for dustborne fungi recovered from both floors and chairs. The models of the first PCA factors for both floors and chairs were similar to those for total fungal concentrations. The results of this study provide essential information to further evaluate the effects of dustborne fungi on office workers' health.This revised version was published online in October 2005 with corrections to the Cover Date.     

Air movement preferences observed in office buildings

Office workers’ preferences for air movement have been extracted from a database of indoor environmental quality surveys performed in over 200 buildings. Dissatisfaction with the amount of air motion is very common, with too little air movement cited far more commonly than too much air movement. Workers were also surveyed in a detailed two-season study of a single naturally ventilated building. About one-half the building’s population wanted more air movement and only 4% wanted less. This same ratio applied when the air movement in workspaces was higher than 0.2 m/s, the de facto draft limit in the current ASHRAE and ISO thermal environment standards. Preference for “less air motion” exceeded that for “more” only at thermal sensations of −2 (cool) or colder. These results raise questions about the consequences of the ASHRAE and ISO standards’ restrictions on air movement, especially for neutral and warm conditions.     

Effects of multi-joint muscular fatigue on biomechanics of slips

The objective of the present study was to investigate the effects of multi-joint muscular fatigue on biomechanics of slips. Both lower-limb fatigue and upper-limb fatigue were examined, and the fatiguing exercises involved multi-joint movements to replicate muscular fatigue in realistic scenarios. Sixty healthy young adults participated in the study, and were evenly categorized into three groups: no fatigue, lower-limb fatigue, and upper-limb fatigue. These participants were instructed to walk on a linear walkway, and slips were induced unexpectedly during walking. The results showed that multi-joint muscular fatigue affects biomechanics of slips in all three phases of slips (i.e. initiation, detection, and recovery). In particular, adaptive safer postural control strategies were adopted with the application of both lower-limb fatigue and upper-limb fatigue to maintain the likelihood of slip initiation as in the no fatigue condition. In the phases of detection and recovery, lower-limb fatigue was found to compromise biomechanics of slips while upper-limb fatigue did not show any effects. Based on these findings, minimizing exposures to lower-limb fatigue should be given higher priority compared to upper-limb fatigue when developing interventions to prevent slip-induced falls. In addition, these findings also suggest that interventions aimed at enhancing proprioceptive acuity and increasing muscular strength in the lower limb could also be effective in slip-induced fall prevention.     

A community-based study of seasonal variation in the onset of chronic fatigue syndrome and idiopathic chronic fatigue

One proposed hypothesis regarding the etiology of chronic fatigue syndrome (CFS) is that there is a subgroup of patients in which symptom onset is precipitated by a viral infection. If this is indeed true, then one would anticipate a greater incidence of the emergence of CFS symptoms during months when viral infections occur with the greatest frequency. The current community-based epidemiology study examined the month of symptom onset for 31 patients with CFS and 44 others with idiopathic chronic fatigue (ICF). It was determined that the distribution of the month of illness onset for the CFS and ICF groups was nonrandom, with greater numbers of participants than expected reporting an onset of CFS and ICF during January. (Chronobiology International, 18(2), 315-319, 2001)     

The physiological and psychological relaxing effects of viewing rose flowers in office workers

Background

In recent years, the physiological relaxing effect brought by nature is becoming clear; however, many workers find it difficult to be exposed to nature in their working environment. Exposure to fresh flowers represents an opportunity to incorporate nature into their working lives. In this study, we examined the effects of exposure to roses on physiological and psychological variables (heart rate variability, pulse rate, and subjective responses) in office workers.

Results

The experimental site was Mizuho Information & Research Institute, Inc., in the Tokyo metropolitan area. Thirty-one male office workers were included in the present study. The subjects were exposed to thirty unscented pink roses (Rosa, Dekora) arranged in a cylindrical glass vase for 4 min. In the control condition, the subjects were not exposed to flowers. After the experiments, the subjects completed a questionnaire. The order of exposure was counterbalanced among subjects. Among subjects exposed to roses, the high-frequency component of heart rate variability was significantly higher than in controls. Similarly, ''comfortable,’ ''relaxed’ and ''natural’ feelings were more common in subjects exposed to roses.

Conclusions

Data from this study support the presence of physiological and psychological relaxing effects of being exposed to flowers on office workers.     

Effect of low frequency fatigue on human muscle strength and fatigability during subsequent stimulated activity

Fatiguing contractions of the adductor pollicis muscle were produced by intermittent supramaximal stimulation of the ulnar nerve in a set frequency pattern, in six normal subjects. At the end of an initial fatiguing contraction series, low frequency fatigue (LFF) had been induced and persisted at 15 min of recovery. Stimulated fatiguing activity was then repeated in an identical fashion to the initial series. At high frequencies, declines in force were similar for both series. At low frequencies, declines in force were greater during the second series despite similar changes in compound muscle action potential amplitude. This confirmation that LFF persists during subsequent stimulated activity, and reduces low but not high frequency fatigue resistance, suggests that the impaired endurance of fatigued muscle during voluntary activity primarily results from peripheral changes at low frequency. These findings also have implications for therapeutic electrical stimulation of muscle.     

Amino acids and central fatigue

Summary. There is an increasing interest in the mechanisms behind central fatigue, particularly in relation to changes in brain monoamine metabolism and the influence of specific amino acids on fatigue. Several studies in experimental animals have shown that physical exercise increases the synthesis and metabolism of brain 5-hydroxytryptamine (5-HT). Support for the involvement of 5-HT in fatigue can be found in studies where the brain concentration of 5-HT has been altered by means of pharmacological agents. When the 5-HT level was elevated in this way the performance was impaired in both rats and human subjects, and in accordance with this a decrease in the 5-HT level caused an improvement in running performance in rats. The precursor of 5-HT is the amino acid tryptophan and the synthesis of 5-HT in the brain is thought to be regulated by the blood supply of free tryptophan in relation to other large neutral amino acids (including the branched-chain amino acids, BCAA) since these compete with tryptophan for transport into the brain. Studies in human subjects have shown that the plasma ratio of free tryptophan/BCAA increases during and, particularly, after sustained exercise. This would favour the transport of tryptophan into the brain and also the synthesis and release of 5-HT which may lead to central fatigue. Attempts have been made to influence the 5-HT level by giving BCAA to human subjects during different types of sustained heavy exercise. The results indicate that ingestion of BCAA reduces the perceived exertion and mental fatigue during exercise and improves cognitive performance after the exercise. In addition, in some situations ingestion of BCAA might also improve physical performance; during exercise in the heat or in a competitive race when the central component of fatigue is assumed to be more pronounced than in a laboratory experiment. However, more experiments are needed to further clarify the effect of BCAA and also of tryptophan ingestion on physical performance and mental fatigue. Received January 3, 2000 / Accepted February 1, 2000     

Urinary electrophoretic profiles from chronic fatigue syndrome and chronic fatigue syndrome/fibromyalgia patients: a pilot study for achieving their normalization

Aim of our study was to determine if there were distinct, disease-related patterns of urinary analytes in chronic fatigue syndrome (CFS) and chronic fatigue syndrome/fibromyalgia (CFS/FM) compared to normal controls (NC). Urine was collected from these subjects for two consecutive 24 h periods and aliquots were submitted to micellar electrokinetic chromatography (MEKC). To compensate for the differences in peak migration times, these were normalized from the 35 min duration of run to a 100-point scale, and each peak was assigned its normalized time measure. Peak heights were also normalized by dividing the mAU by that of the internal standard (creatinine) and multiplying by 100. MEKC with normalization for peak height and migration time generated comparable results within each of the patient groups. CFS/FM and CFS had significant differences in peaks compared to NC that may be of significance as biomarkers of illnesses.     

The scientific evaluation of the thermal environment of cave dwellings in China

1. 1. The conclusion drawn from the result of the research work carried out is that the majority of the existing cave dwellings are not warm in winter and are cool in summer.

2. 2. Unless these cave dwellings are improved they are not suitable and pleasant places for people to live in.

3. 3. Therefore the following measures should be taken so as to improve the quality of the cave dwellings: (i) in summer more fresh air should be let in to replace the state air and the air should be dehumidified to solve the problem of being too cool and humid; and (ii) in winter the geothermal energy and the solar energy should be made full use of, in addition, there should be local heating in the cave dwellings.

Environmental life cycle assessment of a commercial office building in Thailand

Background, aim, and scope  To minimize the environmental impacts of construction and simultaneously move closer to sustainable development in the society, the life cycle assessment of buildings is essential. This article provides an environmental life cycle assessment (LCA) of a typical commercial office building in Thailand. Almost all commercial office buildings in Thailand follow a similar structural, envelope pattern as well as usage patterns. Likewise, almost every office building in Thailand operates on electricity, which is obtained from the national grid which limits variability. Therefore, the results of the single case study building are representative of commercial office buildings in Thailand. Target audiences are architects, building construction managers and environmental policy makers who are interested in the environmental impact of buildings. Materials and methods  In this work, a combination of input–output and process analysis was used in assessing the potential environmental impact associated with the system under study according to the ISO14040 methodology. The study covered the whole life cycle including material production, construction, occupation, maintenance, demolition, and disposal. The inventory data was simulated in an LCA model and the environmental impacts for each stage computed. Three environmental impact categories considered relevant to the Thailand context were evaluated, namely, global warming potential, acidification potential, and photo-oxidant formation potential. A 50-year service time was assumed for the building. Results  The results obtained showed that steel and concrete are the most significant materials both in terms of quantities used, and also for their associated environmental impacts at the manufacturing stage. They accounted for 24% and 47% of the global warming potential, respectively. In addition, of the total photo-oxidant formation potential, they accounted for approximately 41% and 30%; and, of the total acidification potential, 37% and 42%, respectively. Analysis also revealed that the life cycle environmental impacts of commercial buildings are dominated by the operation stage, which accounted for approximately 52% of the total global warming potential, about 66% of the total acidification potential, and about 71% of the total photo-oxidant formation potential, respectively. The results indicate that the principal contributor to the impact categories during the operation phase were emissions related to fossil fuel combustion, particularly for electricity production. Discussion  The life cycle environmental impacts of commercial buildings are dominated by the operation stage, especially electricity consumption. Significant reductions in the environmental impacts of buildings at this stage can be achieved through reducing their operating energy. The results obtained show that increasing the indoor set-point temperature of the building by 2°C, as well as the practice of load shedding, reduces the environmental burdens of buildings at the operation stage. On a national scale, the implementation of these simple no-cost energy conservation measures have the potential to achieve estimated reductions of 10.2% global warming potential, 5.3% acidification potential, and 0.21% photo-oxidant formation potential per year, respectively, in emissions from the power generation sector. Overall, the measures could reduce approximately 4% per year from the projected global warming potential of 211.51 Tg for the economy of Thailand. Conclusions  Operation phase has the highest energy and environmental impacts, followed by the manufacturing phase. At the operation phase, significant reductions in the energy consumption and environmental impacts can be achieved through the implementation of simple no-cost energy conservation as well as energy efficiency strategies. No-cost energy conservation policies, which minimize energy consumption in commercial buildings, should be encouraged in combination with already existing energy efficiency measures of the government. Recommendations and perspectives  In the long run, the environmental impacts of buildings will need to be addressed. Incorporation of environmental life cycle assessment into the current building code is proposed. It is difficult to conduct a full and rigorous life cycle assessment of an office building. A building consists of many materials and components. This study made an effort to access reliable data on all the life cycle stages considered. Nevertheless, there were a number of assumptions made in the study due to the unavailability of adequate data. In order for life cycle modeling to fulfill its potential, there is a need for detailed data on specific building systems and components in Thailand. This will enable designers to construct and customize LCAs during the design phase to enable the evaluation of performance and material tradeoffs across life cycles without the excessive burden of compiling an inventory. Further studies with more detailed, reliable, and Thailand-specific inventories for building materials are recommended.     

Effect of arm-shoulder fatigue on carpenters at work

The purpose of the study was to analyse the effect of arm-shoulder fatigue on manual performance. Ten experienced carpenters performed three standardized tasks (nailing, sawing and screwing). Electromyographic activity was recorded from six arm-shoulder muscles and the performances were video-filmed. After 45 min of standardized arm-cranking (arm-shoulder-fatiguing exercise of approximately 70%-80% maximal oxygen consumption), the tasks were repeated. The number of work movements and the time taken for each task were recorded and the quality of the work performed was compared. After the fatiguing exercise, only nailing was perceived as being harder and more mistakes were made during nailing and sawing. Movement performance was not influenced during nailing but was slightly slower during sawing and faster during screwing. However, there were increased mean EMG amplitudes in the upper trapezius and biceps muscles during nailing, in the upper trapezius, anterior deltoid and infraspinatus muscles during sawing and in the anterior deltoid muscle during screwing. Of the muscles studied the upper trapezius and anterior deltoid muscles increased their activity most after the arm-shoulder-fatiguing exercise.     

Effects of social environment and worker mandibular glands on endocrine-mediated behavioral development in honey bees

Previous studies suggest that older honey bee workers possess an inhibitory signal that regulates behavioral development in younger bees. To study how this inhibitor is transmitted, bees were reared for 7 days in double-screen cages, single-screen cages, or unrestricted in a typical colony (control bees). Double-screen cages prevented physical contact with colony members while single-screen cages allowed only antennation and food exchange. Bees reared in double-screen cages showed accelerated endocrine and behavioral development; they had significantly higher rates of juvenile hormone biosynthesis and juvenile hormone titers than did control bees and also were more likely to become precocious foragers. Relative to the other two groups, bees reared in single-screen cages showed intermediate juvenile hormone biosynthesis rates and titers, and intermediate rates of behavioral development. These results indicate that physical contact is required for total inhibition. We also began to test the hypothesis that worker mandibular glands are the sources of an inhibitory signal. Old bees with mandibular glands removed were significantly less inhibitory towards young bees than were sham-operated and unoperated bees. These results suggest that an inhibitor is produced by the worker mandibular glands. Accepted: 29 January 1998