Molecular recognition in poly(epsilon-caprolactone)-based thermoplastic elastomers

The molecular recognition properties of the hydrogen bonding segments in biodegradable thermoplastic elastomers were explored, aiming at the further functionalization of these potentially interesting biomaterials. A poly(epsilon-caprolactone)-based poly(urea) 2 was synthesized and characterized in terms of mechanical properties, processibility and histocompatibility. Comparison of the data with those obtained from the structurally related poly(urethane urea) 1 revealed that the difference in hard segment structure does not significantly affect the potency for application as a biomaterial. Nevertheless, the small differences in hard block composition had a strong effect on the molecular recognition properties of the hydrogen bonding segments. High selectivity was found for poly(urea) 2 in which bisureidobutylene-functionalized azobenzene dye 3 was selectively incorporated while bisureidopentylene-functionalized azobenzene dye 4 was completely released. In contrast, the incorporation of both dyes in poly(urethane urea) 1 led in both cases to their gradual release in time. Thermal analysis of the polymers in combination with variable temperature infrared experiments indicated that the hard blocks in 1 showed a sharp melting point, whereas those in 2 showed a very broad melting trajectory. This suggests a more precise organization of the hydrogen bonding segments in the hard blocks of poly(urea) 2 compared to poly(urethane urea) 1 and explains the results from the molecular recognition experiments. Preliminary results revealed that a bisureidobutylene-functionalized GRGDS peptide showed more supramolecular interaction with the PCL-based poly(urea), containing the bisureidobutylene recognition unit, as compared to HMW PCL, lacking this recognition unit.     

Poly(caprolactone-co-oxo-crown ether)-based poly(urethane)urea for soft tissue engineering applications

Random copolymers of epsilon-caprolactone and 2-oxo-12-crown-4 ether, poly(CL-co-OC), were used as soft segments in the synthesis of a set of poly(urethane)urea thermoplastic elastomers. With increasing OC content, the soft segment crystallinity decreased, which influenced the mechanical properties: strain induced crystallization disappeared upon the introduction of OC into poly(CL). The material therefore became weaker, however, without a reduction in strain at break. All polymers showed mechanical properties that are suitable for soft tissue engineering. Degradation studies of poly(CL-co-OC) copolymers revealed a higher intrinsic rate of hydrolysis as compared to poly(CL). When at least two neighboring OC units were present in the soft segment, a jump in the intrinsic hydrolysis rate was observed. From this study we deduced an ideal OC:CL ratio for the thermoplastic elastomer soft segments for soft tissue engineering applications. An in vitro degradation study of these poly(urethane)urea showed an increased weight loss. Combined with the enhanced hydrophilicity and reduced crystallinity, we are confident that this will indeed lead to an increased degradation rate in vivo.     

Utilizing peptidic ordering in the design of hierarchical polyurethane/ureas

One of the key design components of nature is the utilization of hierarchical arrangements to fabricate materials with outstanding mechanical properties. Employing the concept of hierarchy, a new class of segmented polyurethane/ureas (PUUs) was synthesized containing either a peptidic, triblock soft segment, or an amorphous, nonpeptidic homoblock block soft segment with either an amorphous or a crystalline hard segment to investigate the effects of bioinspired, multiple levels of organization on thermal and mechanical properties. The peptidic soft segment was composed of poly(benzyl-l-glutamate)-block-poly(dimethylsiloxane)-block-poly(benzyl-l-glutamate) (PBLG-b-PDMS-b-PBLG), restricted to the β-sheet conformation by limiting the peptide segment length to <10 residues, whereas the amorphous soft segment was poly(dimethylsiloxane) (PDMS). The hard segment consisted of either 1,6-hexamethylene diisocyanate (crystalline) or isophorone diisocyanate (amorphous) and chain extended with 1,4-butanediol. Thermal and morphological characterization indicated microphase separation in these hierarchically assembled PUUs; furthermore, inclusion of the peptidic segment significantly increased the average long spacing between domains, whereas the peptide domain retained its β-sheet conformation regardless of the hard segment chemistry. Mechanical analysis revealed an enhanced dynamic modulus for the peptidic polymers over a broader temperature range as compared with the nonpeptidic PUUs as well as an over three-fold increase in tensile modulus. However, the elongation-at-break was dramatically reduced, which was attributed to a shift from a flexible, continuous domain morphology to a rigid, continuous matrix in which the peptide, in conjunction with the hard segment, acts as a stiff reinforcing element.     

Synthesis and properties of degradable poly(urethane urea)s to be used for ligament reconstructions

In the present study we describe the synthesis, wet spinning, mechanical testing, and degradation of poly(urethane urea)s (PUURs) intended for clinical use in anterior cruciate ligament (ACL) reconstruction. The effects of soft segment chemical composition and molar mass and the kind of diamine chain extender on the material properties were investigated. It was found that the fibers made of PUUR with polycaprolactone diol (PCL530) as soft segment and MDI/1,3-DAP as hard segment (PCL530-3) have high tensile strength and high modulus and when degraded keep their tensile strength for the time demanded for the application. In conclusion, from a chemical and mechanical point of view PUUR fibers of PCL530-3, ARTELON, are suitable for designing a degradable ACL device.     

Mast cells in the mouse mammary gland--correlation with the development of lactiferous structures

Specimens of mouse mammary glands obtained from animals being in different phases of reproductive cycle were collected. After staining MCN, the total mast cell area (TMC), mean mast cell area (MMC), and lactiferous structure density index (LDI) were examined in sections, using a computer image analysis system. Statistically significant (P < 0.05) results were: 1. An increase in MCN observed in Group I (4-5 and 9-10 days of pregnancy), a decrease in MCN observed in Group II (2nd and 10th day of lactation); 2. Changes of TMC fully corresponding to changes of MCN; 3. Increase in MMC observed in Group I at mid (days 9-10) and at the end (days 18-19) of pregnancy, decrease in MMC observed in Group IIB (10th day of lactation); 4. LDI (%) higher at the end of pregnancy (Group IC) and during lactation (groups IIA, IIB), compared with control (23.5 +/- 4.12, 37.6 +/- 3.24, 71.0 +/- 4.33 vs. 3.8 +/- 0.39). The observed changes in the number and size of MC strictly correspond to physiological phenomena leading to alternation of the mouse mammary gland functional status by development/involution of the lactiferous structures.     

The segments of influenza viral mRNA.

Influenza viral mRNA, i.e., complementary RNA (cRNA), isolated from infected cells , was resolved into six different species by electrophoresis in 2.1% acrylamide gels containing 6 M urea. The cRNA''s were grouped into three size classes: L (large), M (medium-size), and S (small). Similarly, when gels were sliced for analysis, the virion RNA (vRNA) also distributed into six peaks because the three largest vRNA segments were closely spaced and were resolved only when the gels were autoradiographed or stained. Because of their attached polyadenylic acid [poly(A)]sequences, the cRNA segments migrated more slowly than did the corresponding vRNA segments during gel electrophoresis. After removal of the poly(A) by RNase H, the cRNA and vRNA segments comigrated, indicating that they were approximately the same size. One of the cRNA segments, S2, was shown by annealing to contain the genetic information in the vRNA segment with which it comigrated, strongly suggesting that each cRNA segment was transcribed from the vRNA segment of the same size. In contrast to the vRNA segments, which when isolated from virions were present in approximately 1:1 molar ratios, the segments of the isolated cRNA were present in unequal amounts, with the segments M2 and S2 predominating, suggesting that different amounts of the cRNA segments were synthesized in the infected cell. The predominant cRNA segments, M2 and S2, and also the S1 segment, were active as mRNA''s in wheat germ extracts. The M2 cRNA was the mRNA for the nucleocapsid protein; S1 for the membrane protein; and S2 for the nonstructural protein NS1.     

Ischemic Burden and Clinical Outcome: Is One ‘Culprit’ Ischemic Segment by Dobutamine Stress Magnetic Resonance Predictive?

Aims

We sought to evaluate the impact of ischemic burden for the prediction of hard cardiac events (cardiac death or nonfatal myocardial infarction) in patients with known or suspected CAD who undergo dobutamine stress cardiac magnetic resonance imaging (DCMR)

Methods

We included 3166 patients (pts.), mean age 63±12 years, 27% female, who underwent DCMR in 3 tertiary cardiac centres (University Hospital Heildelberg, German Heart Institute and Kings College London). Pts. were separated in groups based on the number of ischemic segments by wall motion abnormalities (WMA) as follows: 1. no ischemic segment, 2. one ischemic segment, 3. two ischemic segments and 4. ≥three ischemic segments. Cardiac death and nonfatal myocardial infarction were registered as hard cardiac events. Pts. with an “early” revascularization procedure (in the first three months after DCMR) were not included in the final survival analysis.

Results

Pts. were followed for a median of 3.1 years (iqr 2–4.5 years). 187 (5.9%) pts. experienced hard cardiac events. 2349 (74.2%) had no inducible ischemia, 189 (6%) had ischemia in 1 segment, 292 (9.2%) in 2 segments and 336 (10.6%) ≥3 segments. Patients with only 1 ischemic segment showed a high rate of hard cardiac events of ∼6% annually, which was 10-fold higher compared to those without ischemia (0.6% annually, p<0.001) but similar to those with 2 and ≥3ischemic segments (∼5.5% and ∼7%, p = NS).

Conclusions

The presence of inducible ischemia even in a single ‘culprit’ myocardial segment during DCMR is enough to predict hard cardiac events in patients with known or suspected CAD.     

Synthesis of new poly(ether–urethane–urea)s based on amino acid cyclopeptide and PEG: study of their environmental degradation

Conventional polyurethanes (PUs) are among biomaterials not intended to degrade but are susceptible to hydrolytic, oxidative and enzymatic degradation in vivo. Biodegradable PUs are typically prepared from polyester polyols, aliphatic diisocyanates and chain extenders. In this work we have developed a degradable monomer based on α-amino acid to accelerate hard segment degradation. Thus a new class of degradable poly(ether–urethane–urea)s (PEUUs) was synthesized via direct reaction of 4,4′-methylene-bis(4-phenylisocyanate) (MDI), l-leucine anhydride (LA) and polyethylene glycol with molecular weight of 1,000 (PEG-1000) as polyether soft segment. The resulting polymers are environmentally biodegradable and thermally stable. Decomposition temperatures for 5 % weight loss occurred above 300 °C by TGA in nitrogen atmospheres. Some structural characterization and physical properties of these polymers before and after degradation in soil, river water and sludge are reported. The environmental degradation of the polymer films was investigated by SEM, FTIR, TGA, DSC, GPC and XRD techniques. A significant rate of degradation occurred in PEUU samples under river water and sludge condition. The polymeric films were not toxic to E. coli (Gram negative), Staphylococcus aureus and Micrococcus (Gram positive) bacteria and showed good biofilm formation on polymer surface. Our results show that hard segment degraded selectively as much as soft segment and these polymers are susceptible to degradation in soil and water. Thus our study shows that new environment-friendly polyurethane, which can degrade in soil, river water and sludge, is synthesized.     

Membrane topology of the p1258 CadA Cd(II)/Pb(II)/Zn(II)-translocating P-type ATPase

Plasmid pl258 carries the cadA gene that confers resistance to cadmium, lead, and zinc. CadA catalyzes ATP-dependent cadmium efflux from cells of Staphylococcus aureus. It is a member of the superfamily of P-type ATPases and belongs to the subfamily of soft metal ion pumps. In this study the membrane topology of this P-type ATPase was determined by constructing fusions with the topological reporter genes phoA or lacZ. A series of 44 C-terminal truncated CadAs were fused with one or the other reporter gene, and the activity of each chimeric protein was determined. In addition, the location of the first transmembrane segment was determined by immunoblot analysis. The results are consistent with the pl258 CadA ATPase having eight transmembrane segments. The first 109 residues is a cytosolic domain that includes the Cys(X)₂Cys motif that distinguishes soft metal ion-translocating P-type ATPases from their hard metal ion-translocating homologues. Another feature of soft metal ion P-type ATPases is the CysProCys motif, which is found in the sixth transmembrane segment of CadA. The phosphorylation site and ATP binding domain conserved in all P-type ATPases are situated within the large cytoplasmic loop between the sixth and seventh transmembrane segments.     

Biodegradable polyurethane ureas with variable polyester or polycarbonate soft segments: effects of crystallinity, molecular weight, and composition on mechanical properties

Biodegradable polyurethane urea (PUU) elastomers are ideal candidates for fabricating tissue engineering scaffolds with mechanical properties akin to strong and resilient soft tissues. PUU with a crystalline poly(ε-caprolactone) (PCL) macrodiol soft segment (SS) showed good elasticity and resilience at small strains (<50%) but showed poor resilience under large strains because of stress-induced crystallization of the PCL segments, with a permanent set of 677 ± 30% after tensile failure. To obtain softer and more resilient PUUs, we used noncrystalline poly(trimethylene carbonate) (PTMC) or poly(δ-valerolactone-co-ε-caprolactone) (PVLCL) macrodiols of different molecular weights as SSs that were reacted with 1,4-diisocyanatobutane and chain extended with 1,4-diaminobutane. Mechanical properties of the PUUs were characterized by tensile testing with static or cyclic loading and dynamic mechanical analysis. All of the PUUs synthesized showed large elongations at break (800-1400%) and high tensile strength (30-60 MPa). PUUs with noncrystalline SSs all showed improved elasticity and resilience relative to the crystalline PCL-based PUU, especially for the PUUs with high molecular weight SSs (PTMC 5400 M(n) and PVLCL 6000 M(n)), of which the permanent deformation after tensile failure was only 12 ± 7 and 39 ± 4%, respectively. The SS molecular weight also influenced the tensile modulus in an inverse fashion. Accelerated degradation studies in PBS containing 100 U/mL lipase showed significantly greater mass loss for the two polyester-based PUUs versus the polycarbonate-based PUU and for PVLCL versus PCL polyester PUUs. Basic cytocompatibility was demonstrated with primary vascular smooth muscle cell culture. The synthesized families of PUUs showed variable elastomeric behavior that could be explained in terms of the underlying molecular design and crystalline behavior. Depending on the application target of interest, these materials may provide options or guidance for soft tissue scaffold development.     

Effects of urea on the germination and early growth of kale,barley, and wheat

Summary Kale was grown in pots in the glasshouse and barley and wheat in bottomless boxes in the open with increasing amounts of urea applied to the soils maintained at various moisture contents. Two sandy soils and two clay soils (one of each containing much and little organic matter) were used in both pots and boxes; in addition four calcareous soils (two developed over chalk, and two over hard limestone) were used in the boxes to compare the effects of the applied urea on the germination and early growth of crops on different soils.The greatest amount of urea applied to the soils containing little organic matter decreased growth of kale in pots, particularly on drier soils, but did not affect growth on soils containing much organic matter; in contrast, with barley and wheat grown in boxes, urea was more damaging in the soils containing much than in those with little organic matter.The various soils used could be grouped according to the amount of urea giving maximum yield. On a soil containing much free calcium carbonate derived from chalk, urea either did not affect yield or depressed it below that of the unfertilised crop.     

Gold nanoparticles induce surface morphological transformation in polyurethane and affect the cellular response

Nanocomposites from a hexamethylene diisocyanate (HDI)-based polyester-type waterborne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. The microstructure and physiochemical properties of the nanocomposites were characterized. The cell attachment and proliferation, platelet activation, and bacterial adhesion on the nanocomposites were evaluated. Gold nanoparticles in small amounts induced significant changes in surface morphology and domain structures, from hard segment lamellae to soft segment micelles. These changes resembled the morphological transformation among different mesophases occurred in diblock copolymers. Better cellular proliferation, lower platelet activation, and reduced bacterial adhesion were demonstrated for the PU nanocomposite with 43.5 or 65 ppm of Au than the pure PU or the nanocomposite containing a different amount of Au. The different cellular response on PU-Au nanocomposites was attributed to the extensively modified surface morphology and phase separation in the presence of a small amount of Au nanoparticles.     

Palatal distraction in a canine cleft palate model

The purpose of this study was to determine whether the canine hard palate can be lengthened by distraction osteogenesis in a cleft palate model using a mostly submucosal distractor. Five mongrel dogs were used. After raising mucoperiosteal flaps, a midline strip of bone was removed from the hard palate of each dog to simulate the bony defect seen in a cleft palate. A transverse osteotomy was then made to separate the posterior segment of the hard palate from the anterior segment. Posterior osteotomies were also made laterally parallel to the teeth so that the 2 posterior segments (one on either side of the bony cleft) were mobile. An intraoral distractor that was mostly submucosal was attached to the anterior hard palate and both segments of the mobilized posterior hard palate. Radiopaque bone markers were placed, and x-rays were obtained. After a 10-day latency period, the distractor was expanded 0.675 mm per day until it had been lengthened 10.125 mm. Distractors were left in place for an additional 8 weeks. After distractor removal, animals were observed for an additional 8 weeks before euthanization. Follow-up x-rays and histologic examinations were performed. New bone formation was found at the site of distraction in all dogs at the time of death. This new bone was seen on the follow-up x-rays and on histologic examination of the hard palates using both hematoxylin and eosin staining and Masson's trichrome stain. Distraction osteogenesis using a mostly submucosal device is an effective technique for lengthening the hard palate in a canine cleft palate model. The technique may eventually provide an alternative treatment for velopharyngeal incompetence in humans that is more precise and involves less morbidity than existing treatments.     

Homeologous recombination in Solanum lycopersicoides introgression lines of cultivated tomato

A library of "introgression lines" containing Solanum lycopersicoides chromosome segments in the genetic background of cultivated tomato (Lycopersicon esculentum) was used to study factors affecting homeologous recombination. Recombination rates were estimated in progeny of 43 heterozygous introgressions and whole-chromosome substitution lines, together representing 11 of the 12 tomato chromosomes. Recombination within homeologous segments was reduced to as little as 0-10% of expected frequencies. Relative recombination rates were positively correlated with the length of introgressed segments on the tomato map. The highest recombination (up to 40-50% of normal) was observed in long introgressions or substitution lines. Double-introgression lines containing two homeologous segments on opposite chromosome arms were synthesized to increase their combined length. Recombination was higher in the double than in the single segment lines, despite a preference for crossovers in the region of homology between segments. A greater increase in homeologous recombination was obtained by crossing the S. lycopersicoides introgression lines to L. pennellii--a phylogenetically intermediate species--or to L. esculentum lines containing single L. pennellii segments on the same chromosome. Recombination rates were highest in regions of overlap between S. lycopersicoides and L. pennellii segments. The potential application of these results to breeding with introgression lines is discussed.     

Zn^2＋对罗非鱼呼吸运动的影响和解毒的初探

将罗非鱼分别置于含有1、4、8、12ppm ZnSO_4的软、硬质水中,研究15d 中不同亚致死浓度 Zn~(2+)对鱼呼吸和咳嗽反应频率的影响;观测比较加入 EDTA 络合剂的变化,探索解除鱼Zn~(2+)中毒的方法。结果如下:1)呼吸频率的变化和咳嗽反应明显受 Zn~(2+)浓度影响,浓度越大,呼吸频率曲线越偏离对照曲线,咳嗽反应的频率亦越高,它们可作为鱼中毒和解毒的生理学监测指标。2)硬水组鱼受 Zn~(2+)毒害明显小于软水组。3)EDTA 可解除或减轻 Zn~(2+)对鱼的毒害,但其在软、硬水中的解毒效应无明显差异。     

Physical map of the 3'' region of the human immunoglobulin heavy chain locus: clustering of autoantibody-related variable segments in one haplotype.

We have constructed the physical map of the 3' region of the human immunoglobulin heavy chain variable region (VH) genes. DNA segments extending to 200 kb upstream of the JH segment were isolated in two YAC clones. Five VH segments were identified in this region in the 5' to 3' order, V(II-5), V(IV-4), V(I-3), V(I-2), and V(VI-1) segments which were all structurally normal and orientated in the same direction as the JH segments. From DNA of a different cell line we have isolated a cosmid contig containing the same DNA region which has extraordinary polymorphism. The YAC and cosmid DNAs were called haplotypes A and B, respectively. Haplotype B contained an additional VH-I segment (V(I-4.1b)) between the V(II-5) and V(IV-4) segments. V(I-4.1b) segment is almost identical to a previously published VH sequence encoding a rheumatoid factor. Another VH segment in the B haplotype (V(I-3b)) corresponding to the V(I-3) segment also showed 99.7% nucleotide sequence homology with an anti-DNA autoantibody VH sequence. However, none of the VH sequences in haplotype A showed such strong homology with autoantibody VH sequences. The results suggest that VH haplotypes may have linkage with autoantibody production.     

Synthesis, characterization and cytocompatibility of polyurethaneurea elastomers with designed elastase sensitivity

In designing a synthetic scaffold for engineering soft, mechanically active tissues, desirable properties include elasticity, support of cell adhesion and growth, ease of processability, and responsiveness to in vivo remodeling. To achieve these properties, we have developed a family of thermoplastic elastomers, polyurethaneureas (PUs), that possess enzymatic remodeling capabilities in addition to simple hydrolytic lability. PUs were synthesized using either polycaprolactone or triblock copolymer polycaprolactone-b-poly(ethylene glycol)-b-polycaprolactone as the soft segment, 1,4-butanediisocyanate as the hard segment, and the peptide Ala-Ala-Lys as a chain extender. The synthesized PUs had high molecular weights, low glass transition temperatures (< -54 degrees C), and were flexible with breaking strains of 670-890% and tensile strengths of 15-28 MPa. Incubation in buffered saline without elastase for 8 weeks resulted in mass loss from 12% to 18% depending on soft segment composition. The degradation significantly increased (p < 0.05) in the presence of elastase, ranging from 19% to 34% with degradation products showing no cytotoxicity. To encourage cell adhesion, PUs were surface-modified with radio frequency glow discharge followed by coupling of Arg-Gly-Asp-Ser (RGDS). Endothelial cell adhesion was >140% of tissue culture polystyrene on PU surfaces and >200% on RGDS-modified surfaces. The synthesized PUs thus combine mechanical, chemical, and bioresponsive properties that might be employed in soft-tissue engineering applications.     

Resilient bioresorbable copolymers based on trimethylene carbonate, L-lactide, and 1,5-dioxepan-2-one

The new combinations of monomers presented in this work were evaluated in order to create an elastic material for potential application in soft tissue engineering. Thermoplastic elastomers (TPE) of trimethylene carbonate (TMC) with L-lactide (LLA) and 1,5-dioxepan-2-one (DXO) have been synthesized using a cyclic five-membered tin alkoxide initiator. The block copolymers were designed in such a way that poly(trimethylene carbonate-co-1,5-dioxepan-2-one) formed an amorphous middle block and the poly(L-lactide) (PLLA) formed semicrystalline terminal blocks. The amorphous middle block consisted of relatively randomly distributed TMC and DXO monomer units, and the defined block structure of the PLLA terminal segments was confirmed by 13C NMR. The properties of the TMC-DXO-LLA copolymers were compared with those of triblock copolymers based either on LLA-TMC or on LLA-DXO. Differential scanning calorimetry and dynamic mechanical analysis data confirmed the micro-phase separation in the copolymers. The mechanical properties of the copolymers were evaluated using tensile testing and cycling loading. All of the copolymers synthesized showed a highly elastic behavior. The properties of copolymers could be tailored by altering the proportions of the different monomers.     

Segments of paramyosin formed by cleavage at sites of cysteine residues.

The helical muscle protein beta-paramyosin of 200,000 was treated by the general method of G. R. Jacobson et al. (1973), J. Biol. Chem. 248, 6583) for cleavage of the polypeptide chain at the site of Cys residues. The protein cleaved into two segments: CCF-1 of 140,000 daltons and CCF-2 of 60,000 daltons. The two segments were separated and some properties were compared. Circular dichroism measurements indicated that CCF-1 was completely helical and that CCF-2 was 85% in the alpha-helical form. The molecular size, resistance to pepsin digestion, stability to heat and urea, and solubility of CCF-1 were all similar to corresponding properties of a pepsin-resistant segment PPC-1 described earlier (Cowgill, R. W. (1972), Biochemistry 11, 4532). By contrast, the properties of CCF-2 were distinctly different. It was concluded that the CCF-1 segment, like the PPC-1 segment, arose from the N-terminal two-thirds of the paramyosin molecule. The CCF-2 segment from the C-terminal one-third of paramyosin had limited solubility at neutral pH that matched the low solubility of paramyosin. It was concluded that the CCF-2 region is responsible for the self-aggregating tendency of paramyosin at neutral pH and low ionic strength.     

Efficient secretory expression of functional barley limit dextrinase inhibitor by high cell-density fermentation of Pichia pastoris

The limit dextrinase inhibitor (LDI) from barley seeds acts specifically on limit dextrinase (LD), an endogenous starch debranching enzyme. LDI is a 14 kDa hydrophobic protein containing four disulfide bonds and one unpaired thiol group previously found to be either glutathionylated or cysteinylated. It is a member of the so-called CM-protein family that includes α-amylase and serine protease inhibitors, which have been extremely challenging to produce recombinantly in functional form and in good yields. Here, LDI is produced in very high yields by secretory expression by Pichia pastoris applying high cell-density fermentation in a 5L fed-batch bioreactor. Thus about 200mg of LDI, which showed twofold higher inhibitory activity towards LD than LDI from barley seeds, was purified from 1L of culture supernatant by His-tag affinity chromatography and gel filtration. Electrospray ionization mass spectrometry verified the identity of the produced glutathionylated LDI-His(6). At a 1:1M ratio the recombinant LDI completely inhibited hydrolysis of pullulan catalyzed by 5-10 nM LD. LDI retained stability in the pH 2-12 range and at pH 6.5 displayed a half-life of 53 and 33 min at 90 and 93°C, respectively. The efficient heterologous production of LDI suggests secretory expression by P. pastoris to be a promising strategy to obtain other recombinant CM-proteins.