Optimization and evaluation of gastroretentive ranitidine HCl microspheres by using design expert software

The current study involves the development and optimization of their drug entrapment and ex vivo bioadhesion of multiunit chitosan based floating system containing Ranitidine HCl by ionotropic gelation method for gastroretentive delivery. Chitosan being cationic, non-toxic, biocompatible, biodegradable and bioadhesive is frequently used as a material for drug delivery systems and used to transport a drug to an acidic environment where it enhances the transport of polar drugs across epithelial surfaces. The effect of various process variables like drug polymer ratio, concentration of sodium tripolyphosphate and stirring speed on various physiochemical properties like drug entrapment efficiency, particle size and bioadhesion was optimized using central composite design and analyzed using response surface methodology. The observed responses were coincided well with the predicted values given by the optimization technique. The optimized microspheres showed drug entrapment efficiency of 74.73%, particle size 707.26μm and bioadhesion 71.68% in simulated gastric fluid (pH 1.2) after 8h with floating lag time 40s. The average size of all the dried microspheres ranged from 608.24 to 720.80μm. The drug entrapment efficiency of microspheres ranged from 41.67% to 87.58% and bioadhesion ranged from 62% to 86%. Accelerated stability study was performed on optimized formulation as per ICH guidelines and no significant change was found in drug content on storage.     

Experimental study and mathematical modeling for encapsulation of fentanyl citrate drug in nanostructured lipid carrier

Abstract

The aim of this study is to prepare a nanostructured lipid carrier (NLC) containing Fentanyl Citrate drug. The materials were selected in a way to achieve a nanostructure with lower particle size and higher drug entrapment efficiency. For this purpose, we used two mathematical models, Van Krevelen-Hoftyze and Hoy’s methods, which are based on the calculation of solubility parameters. Various NLC formulations are prepared experimentally to validate the mathematical modeling results. Hot homogenization method was used for NLC preparation. DLS, HPLC, TEM and DSC analyses are performed to calculate the size, drug entrapment efficiency, morphology and thermal behavior of particles, respectively. Experimental results suggest that the best NLC formulation has a particle size of 90?nm with a spherical morphology and drug entrapment efficiency of about 82%. A comparison of the mathematical and experimental results exhibits that Van Krevelen-Hoftyzer method is unable to provide an accurate estimation of the decreasing trend of particle size by chaining the components of NLC. However, Hoy’s method seems to be suitable for this purpose. Moreover, both mathematical methods could successfully estimate variation trend of drug entrapment efficiency by chaining the NLC components. Results show that surfactants-lipids solubility parameter has a bearing on the nanoparticle size while drug-lipid solubility parameter affects drug entrapment efficiency.

Communicated by Ramaswamy H. Sarma     

Cellular Uptake and In Vitro Drug Release Studies on Paclitaxel-Loaded Poly(caprolactone)-Grafted Dextran Copolymeric Nanoparticles

Biodegradable and biocompatible polymers play a key role to provide a solution for sustained chemotherapy, when engineered to nanostructure. One such effort has been put forward to engineer self-assembled poly(caprolactone)-grafted dextran (PGD) core–shell micellar vehicle for anticancer drug (paclitaxel) and presented in this study. Paclitaxel-loaded PGD nanoparticles (NPs) were prepared by a modified oil/water emulsion method and characterized by laser light scattering, atomic force microscopy, and zeta potential measurements. The effects of the copolymeric compositions of PGD NPs on drug encapsulation efficiency, in vitro drug release, cellular uptake, and cell viability of NP formulation with paclitaxel were investigated. The drug encapsulation efficiency was determined spectrophotometrically, and in vitro drug release was estimated using dialysis bag. Human gastric cancer cell line (SNU-638) were used to image and measure the cellular uptake of fluorescent PGD NPs. Cancer cell viability of the drug-loaded PGD NPs was measured by crystal violet staining method. From the results obtained on various aspects, we inferred that the above formulated drug-loaded PGD NPs have significant drug encapsulation efficiency, cellular uptake, and the cancer cell mortality.     

盐酸洛拉曲克脂质体的制备及其质量考察

目的：制备盐酸洛拉曲克脂质体并考察其理化特性。方法：采用薄膜挤压-硫酸铵梯度法制备盐酸洛拉曲克脂质体,透射电镜及激光粒度分析仪分别观察和检测其粒径大小及分布,通过紫外分光光度法测定包封率及评估体外释药试验。结果：制备的盐酸洛拉曲克脂质体包封率达83.6%±2.37%,粒径103.5±26nm且分布均匀。24h体外释放实验结果提示约有66.5%的盐酸洛拉曲克从脂质体释放出来。结论：新制备的盐酸洛拉曲克脂质体粒径大小均匀,包封率尚有提高空间,具有体外缓慢释药的特性。     

靶向肿瘤新生血管纳米粒的构建和质量控制

目的：制备F56多肽修饰的长春新碱纳米粒（F56-VCR-NP）,并建立其质量控制方法。方法：乳化－溶剂挥发法优化制备F56．VCR-NP：HPLC法测定其载药量、包封率,透射电镜下观察其形态,激光粒度分析仪测定其粒径和Zeta电位,CBQCA试剂盒测定纳米粒表面多肽密度,XPS进行表面元素分析。结果：优化制备的F56－VCR-NP粒径约为153nm,Zeta电位为－20．8mv,包封率为21．4％,载药量为1．9％,多肽连接效率为26．3％。结论：以聚乙二醇－聚乳酸（PEG-PLA）为原料,长春新碱为模型药物,成功制备出纳米粒子,并建立起有效的质量控制方法,对该实验样品进行了表征。结果表明此类纳米粒子尺寸均匀,表面多价连接F56多肽,载药量和包封率稳定可控,工艺成熟。     

Improved entrapment efficiency of hydrophilic drug substance during nanoprecipitation of poly(I)lactide nanoparticles

The purpose of this research was to improve the entrapment efficiency of a model hydrophilic drug substance, sodium cromoglycate, loaded inside polylactic acid nanoparticles by a modified nanoprecipitation method. The effect of formulation parameters was studied to improve the entrapment efficiency of the drug substance inside the nanoparticles. Several parameters (changes in the amount of model drug, solvent selection, electrolyte addition, pH alteration) were tested in order to increase the loading of the hydrophilic drug in the hydrophobic nanoparticles. Lowering of the pH was the most efficiency way to increase the drug loading; up to approximately 70% of the sodium cromoglycate used in the particle formation process could be loaded inside the particles. The loading efficiency without the pH change was around 10% to 15% at maximum. The crystallinity values and crystal habits of the sodium cromoglycate nanoparticles were studied (x-ray diffraction) before and after the lowering of the pH. The change in pH conditions during the nanoprecipitation process did not affect markedly the crystallinity properties of the drug substance. According to this study, it is possible to improve the entrapment efficiency of hydrophilic sodium cromoglycate inside of the nanoparticles by small changes in the process parameters without alterations in the physical properties of the original drug subtance.     

Extraction and quantification of daunomycin and doxorubicin in tissues

The measurement of intracellular concentrations of the anti-cancer drug doxorubicin was performed by the application of a simple cell extraction technique combined with a rapid high-performance liquid chromatographic separation. Quantitation was done by fluorescence detection. The extraction procedure was non-degradative and the mean recovery of drug was 95%. A high drug extraction efficiency was confirmed with radiolabeled [³H]doxorubicin. The method is applicable to normal and neoplastic tissue.     

Formulation and evaluation of mucoadhesive glipizide microspheres

The purpose of this research was to formulate and system-atically evaluate in vitro and in vivo performances of mucoadhesive microspheres of glipizide. Glipizide microspheres containing chitosan were prepared by simple emulsification phase separation technique using glutaraldehyde as a cross-linking agent. Results of preliminary trials indicate that volume of cross-linking agent, time for cross-linking, polymer-to-drug ratio, and speed of rotation affected characteristics of microspheres. Microspheres were discrete, spherical, and free flowing. The microspheres exhibited good mucoadhesive property in the in vitro wash-off test and also showed a high percentage drug entrapment efficiency. A 3² full factorial design was employed to study the effect of independent variables, polymer-to-drug ratio (X ₁), and stirring speed (X ₂) on dependent variables percentage mucoadhesion, t₈₀, drug entrapment efficiency, and swelling index. The best batch exhibited a high drug entrapment efficiency of 75% and a swelling index of 1.42; percentage mucoadhesion after 1 hour was 78%. The drug release was also sustained for more than 12 hours. The polymer-to-drug ratio had a more significant effect on the dependent variables. In vivo testing of the mucoadhesive microspheres to albino Wistar rats demonstrated significant hypoglycemic effect of glipizide.     

Enhanced skin deposition and delivery of voriconazole using ethosomal preparations

Despite its broad-spectrum antifungal properties, voriconazole has many side effects when administered systemically. The aim of this work was to develop an ethosomal topical delivery system for voriconazole and test its potential to enhance the antifungal properties and skin delivery of the drug. Voriconazole was encapsulated into various ethosomal preparations and the effect of phospholipid and ethanol concentrations on the ethosomes properties were evaluated. The ethosomes were evaluated for drug encapsulation efficiency, particle size and morphology and antifungal efficacy. Drug permeability and deposition were tested in rat abdominal skin. Drug encapsulation efficiency of up to 46% was obtained and it increased with increasing the phospholipid concentration, whereas the opposite effect was observed for the ethanol concentration. The ethosomes had a size of 420–600?nm and negative zeta potential. The particle size of the ethosomes increased by increasing their ethanol content. The ethosomes achieved similar inhibition zones against Aspergillus flavus at a 2-fold lower drug concentration compared with drug solution in dimethyl sulfoxide. The ex vivo drug permeability through rat abdominal skin was ～6-fold higher for the ethosomes compared with the drug hydroalcoholic solution. Similarly, the amount of drug deposited in the skin was higher for the ethosomes and was dependent on the ethanol concentration of the ethosomes. These results confirm that voriconazole ethosomal preparations are promising topical delivery systems that can enhance the drug antifungal efficacy and improve its skin delivery.     

Development and optimization of solid lipid nanoparticles of amikacin by central composite design

Solid lipid nanoparticles (SLNs) have been studied as a drug-delivery system for the controlling of drug release. These colloidal systems have many important advantages, such as biocompatibility, good tolerability, and ease of scale-up. In the preparation of SLNs, many factors are involved in the characteristics of the particles, such as particle size, drug loading, and zeta potential. In this study, fractional factorial design was applied to examine which variables affect the physicochemical properties of amikacin SLNs. Study was continued by a statistical central composite design (CCD) to minimize particle size and maximize drug-loading efficiency of particles. The results showed that three quantitative factors, including the amount of lipid phase, ratio of drug to lipid, and volume of aqueous phase, were the most important variables on studied responses. The best predicted model for particle size was the quadratic model, and for drug-loading efficiency, was the linear model without any significant lack of fit. Optimum condition was achieved when the ratio of drug to lipid was set at 0.5, the amount of lipid phase at 314?mg, and the volume of aqueous phase at 229?mL. The optimized particle size was 149?±?4?nm and the drug-loading efficiency 88?±?5%. Polydispersity index was less than 0.3. The prepared particles had spherical shape, and the drug release from nanoparticles continued for 144 hours (6 days) without significant burst effect.     

乳化溶剂挥发法制备纳米粒

目的：建立乳化溶剂挥发法制备纳米粒的方法。方法：采用单因素法和正交设计法考察不同影响因素对乳化溶剂挥发法所制得的纳米粒粒径、包封率和载药量的影响。结果：采用乳化溶剂挥发法,通过改变处方和工艺因素所制得的纳米粒,外观圆整,大小均匀,粒径可控,包封率多数可达50%以上。结论：优化确立了乳化溶剂挥发法制备纳米粒的处方和工艺,可以制备满足不同要求的纳米粒。     

Preparation and optimization of rivastigmine-loaded tocopherol succinate-based solid lipid nanoparticles

Rivastigmine hydrogen tartrate (RHT) is a pseudo-irreversible inhibitor of cholinesterase and is used for the treatment of Alzheimer's. However, RHT delivery to the brain is limited by the blood–brain barrier (BBB). The purpose of this study was to improve the brain-targeting delivery of RHT by producing and optimizing rivastigmine hydrogen tartrate-loaded tocopherol succinate-based solid lipid nanoparticles (RHT-SLNs). RHT-SLNs were prepared using the microemulsion technique. The impact of significant variables, such as surfactant concentration and drug/lipid ratio, on the size of RHT-SLNs and their drug loading and encapsulation efficiency was analysed using a five-level central composite design (CCD). The minimum size of particles and the maximum efficiency of loading and encapsulation were defined according to models derived from a statistical analysis performed under optimal predicted conditions. The experimental results of optimized RHT-SLNs showed an appropriate particle size of 15.6?nm, 72.4% drug encapsulation efficiency and 6.8% loading efficiency, which revealed a good correlation between the experimental and predicted values. Furthermore, in vitro release studies showed a sustained release of RHT from RHT-SLNs.     

Preparation and in vitro evaluation of polystyrene-coated diltiazem-resin complex by oil-in-water emulsion solvent evaporation method

The purpose of this study was to examine the suitability of polystyrene-coated (PS-coated) microcapsules of drug-resin complex for achieving prolonged release of diltiazem-HCl, a highly water-soluble drug, in simulated gastric and intestinal fluid. The drug was bound to Indion 254, a cation-exchange resin, and the resulting resinate was microencapsulated with PS using an oil-in-water emulsion-solvent evaporation method. The effect of various formulation parameters on the characteristics of the microcapsules was studied. Mean diameter and encapsulation efficiency of the microcapsules rose with an increase in the concentration of emulsion stabilizer and the coat/core ratio, while the same characteristics tended to decrease with an increase in the volume of the organic disperse phase. The desorption of drug from the uncoated resinate was quite rapid and independent of the pH of the dissolution media. On the other hand, the drug release from the microcapsules was prolonged for different periods of time depending on the formulation parameters and was also found to be independent of the pH of the dissolution media. Both the encapsulation efficiency and the retardation of drug release were found to be dependent on the uniformity of coating, which in turn was influenced by the formulation parameters. Kinetic studies revealed that the desorption of drug from the resinate obeyed the typical particle diffusion process, whereas the drug release from the microencapsulated resinate followed the diffusion-controlled model in accordance with the Higuchi equation. PS appeared to be a suitable polymer to provide prolonged release of diltiazem independent of the pH of the dissolution media.     

Investigation of Formulation Variables and Excipient Interaction on the Production of Niosomes

The aim of this study was to investigate the effects of formulation and process variables on the properties of niosomes formed from Span 40 as nonionic surfactant. A variety of formulations encapsulating Paclitaxel, a hydrophobic model drug, were prepared using different dicetyl phosphate (DCP) and Span 40-cholesterol (1:1) amounts. Formulations were optimized by multiple regression analysis to evaluate the changes on niosome characteristics such as entrapment efficiency, particle size, polydispersity index, zeta potential and in vitro drug release. Multiple regression analysis revealed that as Span 40-cholesterol amounts in the formulations were increased, zeta potential and percent of drug released at 24th hour were decreased. Besides, DCP was found to be effective on increasing niosome size. As a process variable, the effect of sonication was observed and findings revealed an irreversible size reduction on Span 40 niosomes after probe sonication. Monodisperse small sized (133 ± 6.01 nm) Span 40 niosomes entrapping 98.2% of Paclitaxel with a weight percentage of 3.64% were successfully prepared. The drug–excipient interactions in niosomes were observed by differential scanning calorimetry and X-ray powder diffraction analysis. Both techniques suggest the conversion of PCTs’ crystal structure to amorphous form. The thermal analyses demonstrate the high interaction between drug and surfactant that explains high entrapment efficiency. After 3-month storage, niosomes preserved their stability in terms of drug amount and particle size. Overall, this study showed that Span 40 niosomes with desired properties can be prepared by changing the content and production variables.Key words: drug delivery systems, drug release, multiple regression, niosomes, paclitaxel     

Improved entrapment efficiency of hydrophilic drug substance during nanoprecipitation of poly(l)lactide nanoparticles

The purpose of this research was to improve the entrapment efficiency of a model hydrophilic drug substance, sodium cromoglycate, loaded inside polylactic acid nanoparticles by a modified nanoprecipitation method. The effect of formulation parameters was studied to improve the entrapment efficiency of the drug substance inside the nanoparticles. Several parameters (changes in the amount of model drug, solvent selection, electrolyte addition, pH alteration) were tested in order to increase the loading of the hydrophilic drug in the hydrophobic nanoparticles. Lowering of the pH was the most efficient way to increase the drug loading; up to approximately 70% of the sodium cromoglycate used in the particle formation process could be loaded inside the particles. The loading efficiency without the pH change was around 10% to 15% at maximum. The crystallinity values and crystal habits of the sodium cromoglycate nanoparticles were studied (x-ray diffraction) before and after the lowering of the pH. The change in pH conditions during the nanoprecipitation process did not affect markedly the crystallinity properties of the drug substance. According to this study, it is possible to improve the entrapment efficiency of hydrophilic sodium cromoglycate inside of the nanoparticles by small changes in the process parameters without alterations in the physical properties of the original drug substance.     

Characterization of beta-lapachone and methylated beta-cyclodextrin solid-state systems

The purpose of this research was to explore the utility of beta cyclodextrin (betaCD) and beta cyclodextrin derivatives (hydroxypropyl-beta-cyclodextrin [HPbetaCD], sulfobutylether-beta-CD [SBbetaCD], and a randomly methylated-beta-CD [RMbetaCD]) to form inclusion complexes with the antitumoral drug, beta-lapachone (betaLAP), in order to overcome the problem of its poor water solubility. RMbetaCD presented the highest efficiency for betaLAP solubilization and was selected to develop solid-state binary systems. Differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), Fourier transform infrared (FTIR) and optical and scanning electron microscopy results suggest the formation of inclusion complexes by both freeze-drying and kneading techniques with a dramatic improvement in drug dissolution efficiency at 20-minute dissolution efficiency (DE(20-minute) 67.15% and 88.22%, respectively) against the drug (DE(20-minute) 27.11%) or the betaCD/drug physical mixture (DE(20-minute) 27.22%). However, the kneading method gives a highly crystalline material that together with the adequate drug dissolution profile make it the best procedure in obtaining inclusion complexes of RMbetaCD/betaLAP convenient for different applications of betaLAP.     

Preparation and characteristics of high-amylose corn starch/pectin blend microparticles: A technical note

Summary and Conclusions  The HACS/pectin blend microparticles were prepared by spray-drying technique to obtain effective targeted drug release to the colon. The mean particle size of the micro-particles (plain and blend) that were prepared in the present study was between 5.8 and 7.3 μm. The microparticles were positively charged (ζ potential was in the range of 20.3 to 30.8), and the encapsulation efficiency was between 80.1% and 94.7%. The blending of HACS with pectin improved the encapsulation efficiency and decreased the drug dissolution in the gastric condition (pH 1.2) from the pectin-based microparticles. Results of the drug release study indicated that the colonic-controlled drug delivery could be obtained from spray-dried HACS/pectin blend microparticles, and the drug release mechanism was found to be by diffusion or erosion or a combination of both. Published: September 30, 2005.     

海藻酸钠漂浮微囊的制备以及载药应用研究

目的:本文研究了一种海藻酸钠漂浮微囊的制备方法用以实现胃部持续给药。方法:采用微胶囊发生器制备海藻酸钠漂浮微囊,壁材为海藻酸钠,芯材为食用油的漂浮微囊,衡量不同的制备参数对微囊的理化特性影响;采用克拉霉素作为模型脂溶性药物,测量漂浮药物递送系统的控制释放性质、以及微囊载药特性和小鼠体内漂浮验证。结果:成功制备出了具有漂浮特性的海藻酸钠微囊,其中泵送速度对微囊性质的影响最大。制备出的微囊具有低细胞毒性,可以实现90%的药物包埋率。此外,微囊可以在小鼠的胃中保存超过6小时,具有良好的漂浮特性。结论:海藻酸钠漂浮微囊是一种有效的胃部药物递送系统,可明显延长药物在胃部的滞留时间。     

嵌段共聚物聚乙二醇-聚苹果酸苄基酯载药胶束的制备及性质研究

目的：为构建聚合物胶束药物运载体系,制备嵌段共聚物聚乙二醇-聚苹果酸苄基酯载药胶束并测定其性质。方法：以L-天冬氨酸为原料,重氮化、环化后经开环聚合得到聚苹果酸苄基酯。氨基聚乙二醇通过酰胺键连接到β-聚苹果酸苄基酯上形成两亲性嵌段共聚物,喜树碱做药物模型制备载药胶束。动态光散射法测定胶束粒径、评价胶束稳定性,高效液相法测定喜树碱载药率和包封率,芘荧光法与动态光散射法测定临界胶束浓度。结果：喜树碱包封率72%,载药率6%,临界胶束浓度为40μg.mL-1。随着聚苹果酸苄基酯分子量减小,胶束稳定性增强。结论：聚乙二醇-聚苹果酸苄基酯在疏水链/亲水链分子量比值为2-4时在水中可自组装形成纳米胶束,可作为性能优良的聚合物药物载体。     

In Vitro and In Vivo Studies on Chitosan Beads of Losartan Duolite AP143 Complex, Optimized by Using Statistical Experimental Design

The aim of the present research work was to develop release modulated beads of losartan potassium complexed with anion exchange resin, Duolite AP143 (cholestyramine). Chitosan was selected as a hydrophilic polymer for the formation of beads which could sustain the release of the drug up to 12 h, along with drug resin complex (DRC). Chitosan beads were prepared using an in-liquid curing method by ionotropic cross-linking or interpolymer linkage with sodium tripolyphosphate (TPP). The formulation of the beads was optimized for entrapment efficiency and drug release using 3² full factorial design. The independent variables selected were DRC/chitosan and percent of TPP. The optimization model was validated for its performance characteristics. Studies revealed that as the concentration of chitosan and TPP was increased, entrapment efficiency and the drug release were found to increase and decrease, respectively. The swelling capacity of chitosan–TPP beads decreased with increasing concentration of TPP. The effect of chitosan concentration and percentage of TPP solution used for cross-linking on entrapment efficiency and drug release rate was extensively investigated. Optimized beads were subjected to in vivo studies in Wistar albino rats to determine the mean arterial blood pressure and compared with marketed formulation. The pharmacodynamic study demonstrates steady blood pressure control for optimized formulation as compared to fluctuated blood pressure for the marketed formulation.