共查询到20条相似文献,搜索用时 15 毫秒
1.
Thin film honeycomb materials were prepared from regioselectively modified celluloses. The method uses water condensation at the surface of a cellulosic solution as an ordered template to form honeycomb structures. Pore size and distribution is controlled by several factors, one of which is the hydrophilicity of the cellulosic used. The amphiphilic nature of the celluloses was modified with varying lengths of ethylene glycol side chains using 2,6-thexyldimethylsilyl cellulose. It was found that the side chains do affect the honeycomb formation, with longer ethylene glycol chains leading to increased pore uniformity but having little influence on the pore size. 相似文献
2.
Comparison of Hydrolysis Efficiency and Enzyme Adsorption of Three Different Cellulosic Materials in the Presence of Poly(ethylene Glycol) 总被引:1,自引:0,他引:1
Min Zhang Jia Ouyang Baotian Liu Heng Yu Ting Jiang Cong Cai Xin Li 《Bioenergy Research》2013,6(4):1252-1259
The addition of non-ionic surfactants has recently been confirmed to positively affect the enzymatic hydrolysis of cellulosic materials. However, the functional mechanisms of these surfactants remain unclear. This work investigated the influence of poly(ethylene glycol) (PEG) on the enzymatic hydrolysis of three cellulosic materials, namely, acid steam-exploded corn straw, pure microcrystalline cellulose (Avicel PH101), and bagasse sulfite pulp (BSP). The results showed that PEG addition led to varied effects on the enzymatic hydrolysis of different cellulosic materials. Addition of PEG was most effective on the enzymatic hydrolysis of PH101 and weakly effective on the hydrolysis of BSP. We further investigated PEG concentrations and enzymatic activities in the supernatant during hydrolysis and found that the positive effects of PEG treatment might contribute to its influence on enzyme desorption from different substrates. We also found that the efficiency of PEG depended on its capacity to bind to different substrates. PEG exhibited stronger affinity to pure cellulose than to the two other lignocellulosic substrates. These findings are helpful in further revealing the mechanism of surfactants and improving the enzymatic hydrolysis process. 相似文献
3.
The synthesis of 3-O-ethylene glycol cellulosics via 2,6-di-O-thexyldimethylsilyl cellulose was studied. Reaction yield and degree of substitution were dependent on reaction conditions and size of the ethylene glycol group. The presence of tetra-n-butylammonium iodide in catalytic amounts and prolonged reaction times significantly increased the degree of substitution of the ethylene glycol substituents. However, the longer reaction times lead to significant degradation of the cellulosic polymer chain. The structure of the 3-O-ethylene glycol 2,6-di-O-thexyldimethylsilyl cellulose intermediates and the 3-O-ethylene glycol 2,6-di-O-acetyl celluloses were confirmed by means of one- and two-dimensional NMR spectroscopy. The degree of 3-O-ethylene glycol substitution was confirmed by quantitative 13C NMR ratified by T1 experiments. 相似文献
4.
Synthesis of cellulose in vitro is expected to afford tailor-made cellulosic materials with highly homogeneous structure compared to natural cellulosic materials. Here we report the enzymatic synthesis of cellulose II with high crystallinity from glucose and α-glucose 1-phosphate (αG1P) by cellodextrin phosphorylase (CDP). Although glucose had been believed not to act as a glucosyl acceptor of CDP, a significant amount of insoluble cellulose was precipitated without accumulation of soluble cello oligosaccharides when glucose was mixed with αG1P and CDP. This phenomenon can be explained in terms of the large difference in acceptor reactivity between glucose and cello oligosaccharides. 1H NMR spectrometric analysis revealed that this insoluble cellulose had an average degree of polymerization (DP) of nine. TEM observation, together with electron and X-ray diffraction studies, indicated that the insoluble cellulose formed platelet-shaped single lamellar crystals of cellulose II, several μm in length and several hundred nm in width; this is large compared to reported cellulose crystals. The thickness of the lamellar crystal is 4.5 nm, which is equivalent to a chain length of a cello oligosaccharide with DP nine and is consistent with the 1H NMR spectroscopic results. These results suggest that cello oligosaccharides having an average DP of nine are synthesized in vitro by CDP when glucose is used as an acceptor, and the product forms highly crystalline cellulose II when it precipitates. 相似文献
5.
A new biodegradable amphiphilic block copolymer, poly(ethylene glycol)-b-poly(L-lactide-co-9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one) [PEG-b-P(LA-co-PTO)], was successfully prepared by ring-opening polymerization (ROP) of L-lactide (LA) and functionalized carbonate monomer 9-phenyl-2,4,8,10-tetraozaspiro[5,5]undecan-3-one (PTO) in the presence of monohydroxyl poly(ethylene glycol) as macroinitiator using Sn(Oct)2 as catalyst. NMR, FT-IR, and GPC studies confirmed the copolymer structure. It could self-assemble into micelles in aqueous solution with critical micelle concentration (CMC) in the magnitude of mg/L, which changed with the composition of the copolymer. After catalytic hydrogenation, copolymers with active hydroxyl groups were obtained. Adhesion and proliferation of Vero cells on the copolymer films showed that the synthesized copolymers were good biocompatible materials. In vitro degradation of the copolymer before and after deprotection was investigated in the presence of proteinase K. The free hydroxyl groups on the copolymers were capable of further modification with biotin. This new amphiphilic block copolymer has great potential for both drug encapsulation and conjugate because of its low CMC and the presence of active hydroxyl groups. 相似文献
6.
(Hydroxypropyl)cellulose (HPC)/vinyl polymer networks were synthesized in film form from liquid-crystalline solutions of HPC in a mixed solvent of methacrylate monomer/methanol/water (2:1:2 in weight) containing cross-linking agents, via photopolymerization of the methacrylate monomer. Di(ethylene glycol) monomethyl ether methacrylate (DEGMEM) or 2-hydroxypropyl methacrylate (HPMA) was used as the polymerizing monomer, and tetra(ethylene glycol) diacrylate and glutaraldehyde were the cross-linkers for the monomers and HPC, respectively. The polymer composite films, HPC/PDEGMEM and HPC/PHPMA, prepared at ca. 60-70 wt % concentrations of HPC in the starting solutions, were iridescently colored due to the selective light reflection, originating from the cholesteric helical arrangement carried over successively into the network system. When the cholesteric films were immersed and swollen in water containing an inorganic neutral salt, their coloration and optical turbidity varied according to a strength of 'chaotropicity' of the impregnant ions. This ionic effect may be interpreted as essentially identical with that found formerly in the coexistent salt-sort dependence of the cholesteric pitch and lower critical solution temperature for HPC aqueous solutions. It is also demonstrated that visual appearance of the swollen networks can be changed by application of an electric potential of practical magnitude between both edges of the samples of rectangular shape. 相似文献
7.
Cellulose was treated with different extracellular microbial enzymes. The treatment of cellulose with the enzymes can improve
alkaline solubility. Both endoglucanase and crude cellulase decreased the average degrees of polymerization () and improved the alkaline solubility of cellulose most efficiently. The composition of the enzyme, the type of cellulosic
materials, pretreatment, and the treatment conditions are the key factors for its effective processing, using the enzymes
to improve on alkaline solubility of cellulose. The improvement in the alkaline solubility is caused by the decrease in and hydrogen bond because of enzymatic hydrolysis. 相似文献
8.
The purpose of this study is to develop a reliable method of functionalizing poly(ethylene terephthalate) with bioactive polymers to produce a "biointegrable" artificial anterior cruciate ligament. Radical graft polymerization of the sodium salt of styrene sulfonate (NaSS) onto poly(ethylene terephthalate) (PET) films was performed using the "grafting from" technique. Prior to the grafting, the surfaces of poly(ethylene terephthalate) films were activated by ozonation to generate peroxide and hydroperoxide reactive species on the PET film surfaces. The radical polymerization of NaSS was initiated by thermal decomposition of the hydroperoxides. The grafted PET surfaces were characterized by a toluidin blue colorimetric method, X-ray photoelectron spectroscopy, contact angle measurements, and atomic force microscopy. The influence of ozonation time, monomer concentration, and temperature on NaSS grafting ratios was examined. A total of 30 min of ozonation followed by grafting from a 15% NaSS solution at 70 degrees C for 90 min or more resulted in attachment of poly(NaSS) chains to the PET film surfaces. 相似文献
9.
Summary The thickness increasing of the cellulosic films produced by bacteria on non-agitated liquid media is due to the formation of new cellulose layers at the film/air interface. 相似文献
10.
11.
Filpponen I Kontturi E Nummelin S Rosilo H Kolehmainen E Ikkala O Laine J 《Biomacromolecules》2012,13(3):736-742
A generic approach for heterogeneous surface modification of cellulosic materials in aqueous medium, applicable for a wide range of functionalizations, is presented. In the first step, carboxymethyl cellulose (CMC) modified with azide or alkyne functionality, was adsorbed on a cellulosic substrate, thus, providing reactive sites for azide-alkyne cycloaddition click reactions. In the second step, functional units with complementary click units were reacted on the cellulose surface, coated by the click-modified CMC. Selected model functionalizations on diverse cellulosic substrates are shown to demonstrate the generality of the approach. The concept by sequentially combining the robust physical adsorption ("physical click") and robust chemical reaction ("chemical click") allows versatile, simple, and environmentally friendly modification of a cellulosic substrate with virtually any azide- or alkyne-modified molecule and even functionalization with several types of units. 相似文献
12.
Radical graft functional modification of cellulose with allyl monomers: Chemistry and structure characterization 总被引:1,自引:0,他引:1
Cotton cellulose was successfully functionalized via a free radical graft polymerization process. Potassium persulfate served as an effective water soluble radical initiator to generate cellulosic radicals. The polymeric radicals could react with allyl monomers such as allyl-dimethylhydantion (ADMH) to form surface grafted cellulose. The reaction sites generated by potassium persulfate were probably at carbon 3 and 4 in glucose ring via oxidative hydrogen abstraction. The cellulosic radicals can initiate grafting polymerization of ADMH with a maximum polymerization degree of about 12 based on LC–MS results. The radical graft polymerization mechanisms were proposed based on LC–ESI/MS analysis. The ideal covalent bonding between cellulose and poly (allyl-dimethylhydantion) (PADMH) ensured permanent graft of the monomers on cotton and durability of the expected functions on the treated cotton. 相似文献
13.
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, has been a good candidate of biomaterial employed in tissue engineering. However, the PHBV film is hydrophobic and has no recognition sites for cell attachment. In this study, PHBV films are activated by ammonia plasma treatment to produce amino groups on the surface, followed by sequential reactions with a heterobifunctional cross-linker containing a segment of poly(ethylene glycol) (PEG) and further with RGD-containing peptides. XPS analyses of modified surfaces after each reaction step reveal that the RGD-containing peptides have been covalently grafted onto PHBV films. The result of cell viability assay indicates that the RGD-modified PHBV films exhibit a distinctly improved cellular compatibility. Moreover, according to the results of serum adsorption tests by optical waveguide lightmode spectroscopy (OWLS) and fibrinogen adsorption tests by enzyme-linked immunosorbent assay (ELISA) on unmodified and modified PHBV surfaces, the introduced PEG chains can significantly decrease the nonspecific adsorption of proteins from serum and fibrinogen from plasma, thus decreasing the risk of thrombus formation and improving the blood compatibility of implanted materials. 相似文献
14.
Hambardzumyan A Molinari M Dumelie N Foulon L Habrant A Chabbert B Aguié-Béghin V 《Comptes rendus biologies》2011,334(11):839-850
Interfacial affinity between lignin model compound (dehydrogenation polymer [DHP]) and cellulose nanocristals (CN) was studied before building a nanocomposite cellulose/lignin in multilayer form by spin-coating method. The adsorption isotherm of DHP was measured by ellipsometry at the liquid/CN film interface and showed that the surface concentration of adsorbed DHP increases with the bulk concentration in solution. The DHP appeared as globular structures on cellulosic film, as observed by AFM. Spreading a dense lignin layer on CN film gave rise to the disappearance of the InfraRed resonance bands related to the DHP aromatics. The film obtained from alternate layers of cellulose/DHP was transparent in visible light and had weak absorption in UV wavelengths. Optical properties measured in the visible wavelength range by ellipsometry and spectrophotometry indicated that beyond six bilayers (cellulose/DHP), the composite exhibits antireflexion properties. 相似文献
15.
This study aims to establish an efficient pretreatment process using cellulose-dissolution solvents to enhance the enzymatic saccharification. LiOH/urea, LiCl/DMAc, concentrated phosphoric acid, ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and N-methyl-morpholine-N-oxide (NMMO) were selected as the cellulose dissolution agents. Except the cellulosic sample regenerated from LiCl/DMAc system, all the other treated samples exhibited lower cellulose crystallinity and degree of polymerization (DP), and consequently, exhibited a significant enhancement on enzymatic hydrolysis kinetic. Ionic liquid pretreatment offered unique advantages in the hydrolysis rate in the first 10 h, probably due to the extensively structural transformation of cellulose from the crystalline to the amorphous region. Meanwhile, the regenerated cellulose from concentrated phosphoric acid almost completely consisted of cellulose II, and achieved the highest saccharification yield. 相似文献
16.
Transparent cellulose films with high gas barrier properties fabricated from aqueous alkali/urea solutions 总被引:1,自引:0,他引:1
Transparent and bendable regenerated cellulose films prepared from aqueous alkali (NaOH or LiOH)/urea (AU) solutions exhibit high oxygen barrier properties, which are superior to those of conventional cellophane, poly(vinylidene chloride), and poly(vinyl alcohol). Series of AU cellulose films are prepared from different cellulose sources (cotton linters, microcrystalline cellulose powder, and softwood bleached kraft pulp) for different dissolution and regeneration conditions. The oxygen permeabilities of these AU cellulose films vary widely from 0.003 to 0.03 mL μm m(-2) day(-1) kPa(-1) at 0% relative humidity depending on the conditions used to prepare the films. The lowest oxygen permeability is achieved for the AU film prepared from 6 wt % cellulose solution by regeneration with acetone at 0 °C. The oxygen permeabilities of the AU cellulose films are negatively correlated with their densities, and AU films prepared from solutions with high cellulose concentrations by regeneration in a solvent at low temperatures generally have low oxygen permeabilities. The AU cellulose films are, therefore, promising biobased packaging materials with high-oxygen barrier properties. 相似文献
17.
《Enzyme and microbial technology》2005,36(2-3):314-317
Different cellulosic materials were treated with different extraceller microbial enzymes. Changes in structure and properties of the cellulose caused by enzymatic treatment depend on the composition, the type of enzyme and the type of cellulosic materials. Both endoglucanase and crude cellulase have pronounced effects on the structure of cellulose. The variation of crystal structure was found to attack preferentially the (0 0 2) crystal planes for cellulose I during enzymatic hydrolysis. 相似文献
18.
Molecular basis of film formation from a soybean protein: comparison between the conformation of glycinin in aqueous solution and in films 总被引:1,自引:0,他引:1
Muriel Subirade Isabelle Kelly Jacques Guéguen Michel Pézolet 《International journal of biological macromolecules》1998,23(4):241-249
Fourier transform infrared spectroscopy has been used to investigate the conformational changes of glycinin, a major storage protein of soybean seeds, upon film-forming. The results show that the secondary structure of glycinin is mainly composed of a β-sheet (48%) and unordered (49%) structures. The amide I band of glycinin in film-forming conditions, i.e. in alkaline media and in the presence of plasticizing agent, reveals the conversion of 18% of the secondary structure of the protein from the β-sheet (6%) and random coil (12%) to the -helical conformation due to the helicogenic effect of the ethylene glycol used as the plasticizing agent. Conformational changes also occur upon the film-forming process leading to the formation of intermolecular hydrogen-bonded β-sheet structures. Results obtained from other plant families indicate that, whatever the origin and conformation of protein, formation of films leads to the appearance of intermolecular hydrogen-bonded β-sheet structures, suggesting that this type of structure might be essential for the network formation in films. Thus, it is hypothesized that, in the film state, intermolecular hydrogen bonding between segments of β-sheet may act as junction zones in the film network. This study reveals for the first time that there is a close relationship between the conformation of proteins and the mechanical properties of films. 相似文献
19.
H.-W. Feng Y.-E. Zhi Y.-J. Sun L.-R. Xu L.-M. Wang X.-J. Zhan P. Zhou 《Applied Biochemistry and Microbiology》2016,52(4):371-377
Streptomyces griseorubens JSD-1 is novel isolate utilizing cellulose as a sole carbon source for growth, and cellulytic genes related to this proceßs were expected to be crucial. To investigate the molecular mechanism of cellulose metabolism, bacterial genome sequencing was carried out. As a result, its draft genome map was obtained which has been deposited at GenBank. ß-1,4-glucosidase (Glu) was acquired following with characterization of its cellular localization and expression profiles. Glu from S. griseorubens JSD-1 was suggested to be an intracellular enzyme which was different from those obtained from similar species through the combined analysis of multiple sequences alignment and putative 3D structure modeling. Expression of recombinant enzyme was optimized in heterogeneous hosts for the further determination of its optimum pH and temperature as well as the residual activity in the presence of metal ions and inhibitors. Novel Glu expected to have promising potential in the degradation of cellulosic materials. 相似文献
20.
There is considerable clinical interest in the use of "second-generation" therapeutic proteins produced by conjugation of the native protein with various polymers including poly(ethylene glycol) (PEG). One of the challenges in the production of polymer-protein conjugates is the need to remove residual polymer, native (unreacted) protein, and any reaction byproducts from the final therapeutic formulation. The overall objective of this study was to evaluate the possibility of using ultrafiltration for the purification of a model PEGylated protein. Sieving data were obtained using PEGylated alpha-lactalbumin, the native protein, and the poly(ethylene glycol) over a range of pH, ionic strength, and filtrate flux using both neutral and charge-modified composite regenerated cellulose membranes. Purification of the PEGylated protein was achieved using a two-stage diafiltration process. The first stage used a neutral membrane to remove the unreacted protein and any small reaction byproducts while retaining the large PEGylated product. The second stage used a negatively charged membrane to remove the neutral poly(ethylene glycol) while retaining the PEGylated alpha-lactalbumin as a result of strong electrostatic interactions. These results clearly demonstrate the potential of using membrane-based separations for the purification of second-generation therapeutic proteins. 相似文献