Thermophilic,anaerobic co-digestion of microalgal biomass and cellulose for H<Subscript>2</Subscript> production

Microalgal biomass has been a focus in the sustainable energy field, especially biodiesel production. The purpose of this study was to assess the feasibility of treating microalgal biomass and cellulose by anaerobic digestion for H₂ production. A microbial consortium, TC60, known to degrade cellulose and other plant polymers, was enriched on a mixture of cellulose and green microalgal biomass of Dunaliella tertiolecta, a marine species, or Chlorella vulgaris, a freshwater species. After five enrichment steps at 60°C, hydrogen yields increased at least 10% under all conditions. Anaerobic digestion of D. tertiolecta and cellulose by TC60 produced 7.7 mmol H₂/g volatile solids (VS) which were higher than the levels (2.9–4.2 mmol/g VS) obtained with cellulose and C. vulgaris biomass. Both microalgal slurries contained satellite prokaryotes. The C. vulgaris slurry, without TC60 inoculation, generated H₂ levels on par with that of TC60 on cellulose alone. The biomass-fed anaerobic digestion resulted in large shifts in short chain fatty acid concentrations and increased ammonium levels. Growth and H₂ production increased when TC60 was grown on a combination of D. tertiolecta and cellulose due to nutrients released from algal cells via lysis. The results indicated that satellite heterotrophs from C. vulgaris produced H₂ but the Chlorella biomass was not substantially degraded by TC60. To date, this is the first study to examine H₂ production by anaerobic digestion of microalgal biomass. The results indicate that H₂ production is feasible but higher yields could be achieved by optimization of the bioprocess conditions including biomass pretreatment.     

Carbon dioxide utilisation of Dunaliella tertiolecta for carbon bio-mitigation in a semicontinuous photobioreactor

Bio-fixation of carbon dioxide (CO₂) by microalgae has been recognised as an attractive approach to offset anthropogenic emissions. Biological carbon mitigation is the process whereby autotrophic organisms, such as microalgae, convert CO₂ into organic carbon and O₂ through photosynthesis; this process through respiration produces biomass. In this study Dunaliella tertiolecta was cultivated in a semicontinuous culture to investigate the carbon mitigation rate of the system. The algae were produced in 1.2-L Roux bottles with a working volume of 1 L while semicontinuous production commenced on day 4 of cultivation when the carbon mitigation rate was found to be at a maximum for D. tertiolecta. The reduction in CO₂ between input and output gases was monitored to predict carbon fixation rates while biomass production and microalgal carbon content are used to calculate the actual carbon mitigation potential of D. tertiolecta. A renewal rate of 45 % of flask volume was utilised to maintain the culture in exponential growth with an average daily productivity of 0.07 g L^?1 day^?1. The results showed that 0.74 g L^?1 of biomass could be achieved after 7 days of semicontinuous production while a total carbon mitigation of 0.37 g L^?1 was achieved. This represented an increase of 0.18 g L^?1 in carbon mitigation rate compared to batch production of D. tertiolecta over the same cultivation period.     

The effect of heavy metals on microbial community structure of a sulfidogenic consortium in anaerobic semi-continuous stirred tank reactors

The effect of heavy metals on community structure of a heavy metal tolerant sulfidogenic consortium was evaluated by using a combination of denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene and dissimilatory sulfite reductase (dsrB) gene fragments, 16S rRNA gene cloning analysis and fluorescence in situ hybridization (FISH). For this purpose, four anaerobic semi-continuous stirred tank reactors (referred as R1–R4) were run in parallel for 12 weeks at heavy metal loading rates of 1.5, 3, 4.5 and 7.5 mg l^?1 d^?1 each of Cu²⁺, Ni²⁺, Zn²⁺, and Cr⁶⁺, respectively. The abundance ratio of Desulfovibrio vulgaris detected by FISH to total cell counts was consistent with the obtained results of cloning and DGGE. This indicated that D. vulgaris was dominant in all analyzed samples and played a key role in heavy metal removal in R1, R2, and R3. In contrast, after 4 weeks of operation of R4, a distinct biomass loss was observed and no positive hybridized cells were detected by specific probes for the domain Bacteria, sulfate-reducing bacteria and D. vulgris. High removal efficiencies of heavy metals were achieved in R1, R2 and R3 after 12 weeks, whereas the precipitation of heavy metals in R4 was significantly decreased after 4 weeks and almost not observed after 6 weeks of operation. In addition, the anaerobic bacteria, such as Pertrimonas sulfuriphila, Clostridium sp., Citrobacter amalonaticus, and Klebsiella sp., identified from DGGE bands and clone library were hypothesized as heavy metal resistant bacteria at a loading rate of 1.5 mg l^?1 d^?1 of Cu²⁺, Ni²⁺, Zn²⁺, and Cr^6+.     

A comparative study of the coagulation behaviour of marine microalgae

Coagulation is an important step in the harvesting of algal biomass. This paper presents experimental results for a variety of prospective marine microalgal species using several inorganic and organic coagulants. Tetraselmis suecica and Chlorococcum sp. are readily coagulated using alum or iron(III) sulphate without any pH adjustment; doses of 3–5 mg L^?1 or 0.2 mmol m^?2 of Al³⁺ or Fe³⁺ yielding cell recoveries above 90 % after only 5-min settling. Nannochloropsis salina, Dunaliella tertiolecta and Isochrysis galbana are harder to coagulate and require at least two times more coagulant to achieve similar recoveries. Several cationic polyacrylamides were investigated but were less effective than Al³⁺ or Fe³⁺. Addition of NaOH to control pH improved the coagulation efficiency of N. salina but not of D. tertiolecta. The high coagulant demand of N. salina is due in part to its small size and large surface area, while that of D. tertiolecta may be attributable to its high production of extracellular polymer. The implications of cell surface properties for coagulation efficiency are discussed. At the coagulant doses used herein, settled cells remain viable. Resuspension is a potential problem with some species, arising either from cell motility or from flotation of flocs by oxygen bubbles generated by photosynthesis. These effects can be eliminated by small additions of chlorine or by settling the algae in the dark.     

Comparison of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and cyanobacterial biomass: cultivation in urban wastewater and methane production

Anaerobic digestion of microalgae is hampered by its complex cell wall. Against this background, cyanobacteria cell walls render this biomass as an ideal substrate for overcoming this drawback. The aim of the present study was to compare the growth of two cyanobacteria (Aphanizomenon ovalisporum and Anabaena planctonica) and a microalga (Chlorella vulgaris) in urban wastewater when varying the temperature (22, 27 and 32 °C). Cyanobacterial optimal growth for both strains was attained at 22 °C, while C. vulgaris did not show remarkable differences among temperatures. For all the microorganisms, ammonium removal was higher than phosphate. Biomass collected was subjected to anaerobic digestion. Methane yield of C. vulgaris was 184.8 mL CH₄ g COD in^?1 while with A. ovalisporum and A. planctonica the methane production was 1.2- and 1.4-fold higher. This study showed that cyanobacteria growth rates could be comparable to microalgae while presenting the additional benefit of an increased anaerobic digestibility.     

The influence of bacteria on the arsenic species produced by laboratory cultures of the marine phytoplankton Dunaliella tertiolecta

To assess whether bacteria influence the biogeochemical cycling of arsenic by laboratory cultures of the marine phytoplankton Dunaliella tertiolecta, the arsenic species produced by D. tertiolecta were compared in “operationally sterile” and bacteria spiked cultures. It was observed that glycerol (Gly-) arsenoriboside (41–78 %), phosphate (PO₄?) arsenoriboside (7–38 %) and arsenate (As(V)) (15–21 %) were the major water-soluble arsenic species in all D. tertiolecta cultures irrespective of whether cultures were operationally sterile or contained added bacteria. PO₄-riboside (46–74 %) and Gly-riboside (24–36 %) were also the major arsenic species in hydrolysed lipid extracts of D. tertiolecta irrespective of whether cultures were operationally sterile or contained bacteria. In addition to similarities in the arsenic species produced, total arsenic concentrations and culture growth did not differ relative to whether cultures were operationally sterile or not. Similar bacterial strains were identified in all D. tertiolecta cultures irrespective of whether bacteria were added or not. Consequently, it is evident that the presence of “foreign” or “added” bacteria in D. tertiolecta has minimal influence on the metabolism and cycling of arsenic by phytoplankton. Thus, the use of laboratory phytoplankton cultures containing bacteria may be appropriate means to investigate arsenic biogeochemical cycling unlike previously believed.     

Long-term outdoor growth and lipid productivity of Tetraselmis suecica, Dunaliella tertiolecta and Chlorella sp (Chlorophyta) in bag photobioreactors

There has been considerable interest on cultivation of green microalgae (Chlorophyta) as a source of lipid that can alternatively be converted to biodiesel. The ideal microalga characteristics are that it must grow well even under high cell density and under varying outdoor environmental conditions and be able to have a high biomass productivity and contain a high oil content (~25–30 %). The main advantage of Chlorophyta is that their fatty acid profile is suitable for biodiesel conversion. Tetraselmis suecica CS-187 and Chlorella sp. were grown semi-continuously in bag photobioreactors (120 L, W?×?L?=?40?×?380 cm) over a period of 11 months in Melbourne, Victoria, Australia. Monthly biomass productivity of T. suecica CS-187 and Chlorella sp. was strongly correlated to available solar irradiance. The total dry weight productivity of T. suecica and Chlorella sp. was 110 and 140 mg L^?1 d^?1, respectively, with minimum 25 % lipid content for both strains. Both strains were able to tolerate a wide range of shear produced by mixing. Operating cultures at lower cell density resulted in increasing specific growth rates of T. suecica and Chlorella sp. but did not affect their overall biomass productivity. On the other hand, self shading sets the upper limit of operational maximum cell density. Several attempts in cultivating Dunaliella tertiolecta CS-175 under the same climatic conditions were unsuccessful.     

Effect of different media on exopolysaccharide and biomass production by the green microalga Botryococcus braunii

Botryococcus braunii is a colonial green microalga with recognized potential to synthesize lipids and hydrocarbons for biofuel production. Besides this ability, this microalga also produces exopolysaccharides (EPS). Nevertheless, there are few reports about their biotechnological aspects and industrial applications. In this study, the effect of the nutritional conditions was examined by using two different culture media (BG11 and D medium). To our knowledge, the latter has not been reported before for culturing B. braunii. After 49 days of incubation, the final production of EPS was found to be statistically higher (P < 0.05) in the D medium (0.549?±?0.044 g L^?1) than in BG11 (0.336?±?0.009 g L^?1). On the contrary, the biomass production was found to be higher in BG11 (1.019?±?0.051 g L^?1) than in the D medium (0.953?±?0.056 g L^?1). However, this difference was not statistically significant. The difference in salinity and nitrogen concentration between both media is suggested as the main factor involved in the EPS and biomass results. FTIR spectra of B. braunii EPS from both media revealed presence of uronic acids and absence of amino and sulfate groups. Despite the similarity between both spectra, there were some different signals (at 1,921.52 and 720.60 cm^?1) which may mean a difference in glycosyl composition.     

Simultaneous nutrient removal and lipid production from pretreated piggery wastewater by Chlorella vulgaris YSW-04

The feasibility of using a microalga Chlorella vulgaris YSW-04 was investigated for removal of nutrients from piggery wastewater effluent. The consequent lipid production by the microalga was also identified and quantitatively determined. The wastewater effluent was diluted to different concentrations ranging from 20 to 80 % of the original using either synthetic media or distilled water. The dilution effect on both lipid production and nutrient removal was evaluated, and growth rate of C. vulgaris was also monitored. Dilution of the wastewater effluent improved microalgal growth, lipid productivity, and nutrient removal. The growth rate of C. vulgaris was increased with decreased concentration of piggery wastewater in the culture media regardless of the diluent type. Lipid production was relatively higher when using synthetic media than using distilled water for dilution of wastewater. The composition of fatty acids accumulated in microalgal biomass was dependent upon both dilution ratio and diluent type. The microalga grown on a 20 % concentration of wastewater effluent diluted with distilled water was more promising for generating high-efficient biodiesel compared to the other culture conditions. The highest removal of inorganic nutrients was also achieved at the same dilution condition. Our results revealed the optimal pretreatment condition for the biodegradation of piggery wastewater with microalgae for subsequent production of high-efficient biodiesel.     

Application of sodium erythorbate to promote the growth of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis>

Sodium erythorbate (NaE) is a common antioxidant in food processing. In this study, the abilities of NaE to reduce photosynthetic oxygen accumulation in culture medium and improve microalgal growth were evaluated using the green microalga Chlorella vulgaris and glucose as a reference. NaE (from 2.0 to 16.0 g L^?1) led to a lower accumulation of dissolved oxygen (DO) in a concentration-dependent manner. A significant negative correlation (p < 0.05) between the optical density (OD₆₈₀) and DO level suggested that algal growth was promoted by NaE through depleting oxygen in the medium. After 12 days of cultivation, maximum OD₆₈₀ and biomass were obtained with a NaE dosage of 8.0 g L^?1 (respectively, 3.99 and 6.26 times greater than in the control without NaE). Compared with this dosage group which maintained an appropriate low DO level (2 to 6 mg L^?1), higher dosage groups showed relatively little growth promotion due to an insufficiency of DO (<2 mg L^?1). When glucose was added into mixotrophic systems for C. vulgaris, to the same total carbon amount as NaE, DO fell rapidly to less than 2 mg L^?1 owing to its greater consumption (43.9%) compared to that of NaE (16.7%). Furthermore, in the NaE treatment, the pigment contents, cell density, and algal biomass were, respectively, 4.17 to 4.44 times, 2.67 times, and 1.21 times greater than in the glucose treatment. These findings indicate that algal autotrophic growth could be enhanced effectively by NaE through the moderate control of DO.     

Enrichment and characterization of an anaerobic cellulolytic microbial consortium SQD-1.1 from mangrove soil

Enrichment of microbial consortia provides an approach to simulate and investigate microbial communities in natural environments. In this study, a cellulolytic microbial consortium SQD-1.1 was enriched from mangrove soil of Qinglan port (Hainan, China) by 27 times continuous subcultivation under anaerobic static conditions. The consortium could completely degrade 0.2 % (w/v) filter paper within 3 days and utilized it as the sole carbon source. PCR-denaturing gradient gel electrophoresis analysis revealed a stable microbial community structure in the incubation process of 10 days and in the procedure of subcultivation. Twenty-four operational taxonomic units belonging to seven phyla were obtained from the full-length 16S rRNA gene library. Five clones, closest related to the genera Alkaliflexus, Clostridium, Alistipes, Spirochaeta, and Trichococcus, were the predominant ones. Among them, M117, phylogeneticly showing high similarity (16S rRNA gene identity, 95.3 %) with the cellulolytic anaerobic bacterium Clostridium straminisolvens CSK1^T, was the potential key cellulolytic bacterium. Using the plate cultivation method, 12 strains, including one potential new species and four potential new species of new genera, were isolated. The strain P2, corresponding to the most frequently detected clone (M05) in the 16S rRNA gene library, showed both CMCase and xylanase activity and may be another important cellulolytic bacterium. The findings of cellulase activity in cell pellet and cohesion and dockerin domains in metagenome data further suggested the potential of utilization of cellulosomes by the consortium to degrade cellulose. Consortium SQD-1.1 provides a candidate for investigating the mechanism of cellulose degradation under anoxic conditions in natural environments.     

Physiological response of Nannochloropsis sp. to saline stress in laboratory batch cultures

In the present paper, we investigated the physiological response of the marine microalga Nannochloropsis sp. to salt stress (13, 27, 54, and 81 g L^?1 NaCl). Increasing the sodium chloride concentration caused up to a 70 % decrease in the chlorophyll a concentration, cell growth, and net photosynthesis rate. The chlorophyll a fluorescence measurements indicated a strong reduction in the effective quantum yield of photosystem II (?60 %) and an increase in nonphotochemical quenching when the cells were exposed to NaCl concentrations greater than 27 g L^?1 (control). In contrast, the specific lipid content increased up to 80 % when the sodium chloride concentration was increased from 27 to 54–81 g L^?1. These results are relevant for the outdoor cultivation of this microalga using open photobioreactors, in which microalgae are subjected to strong changes in salinity concentration caused by water evaporation.     

Characterization of cell growth and starch production in the marine green microalga Tetraselmis subcordiformis under extracellular phosphorus-deprived and sequentially phosphorus-replete conditions

Microalgal starch is a potential feedstock for biofuel production. Nutrient stress is widely used to stimulate starch accumulation in microalgae. Cell growth and starch accumulation in the marine green microalga Tetraselmis subcordiformis were evaluated under extracellular phosphorus deprivation with initial cell densities (ICD) of 1.5, 3.0, 6.0, and 9.0?×?10⁶ cells mL^?1. The intracellular stored phosphorus supported cell growth when extracellular phosphorus was absent. The maximum starch content of 44.1 % was achieved in the lowest ICD culture, while the maximum biomass productivity of 0.71 g L^?1 day^?1, starch concentration of 1.6 g L^?1, and starch productivity of 0.30 g L^?1 day^?1 were all obtained in the culture with the ICD of 3.0?×?10⁶ cells mL^?1. Appropriate ICD could be used to regulate the intracellular phosphorus concentration and maintain adequate photosynthetic activity to achieve the highest starch productivity, along with biomass and starch concentration. The recovery of phosphorus-deprived T. subcordiformis in medium containing 0.5, 1.0, or 6.0 mM KH₂PO₄ was also tested. Cell growth and starch accumulation ability could be recovered completely. A phosphorus pool in T. subcordiformis was shown to manipulate its metabolic activity under different environmental phosphorus availability. Though lower starch productivity and starch content were achieved under phosphorus deprivation compared with nitrogen- or sulfur-deprived conditions, the higher biomass and starch concentration make T. subcordiformis a good candidate for biomass and starch production under extracellular phosphorus deprivation.     

Extraction of lipids and pigments of Chlorella vulgaris by supercritical carbon dioxide: influence of bead milling on extraction performance

The influence of bead milling on the extraction of lipids and pigments by supercritical carbon dioxide was investigated in this study. Different operating parameters for the 3-h process were first tested on raw Chlorella vulgaris; 600 bar was the optimum pressure at 60 °C with a carbon dioxide flow rate of 30 g min^?1. Under these operating conditions, 10 % of total lipid containing chlorophyll and carotenoids with 1.61 and 1.72 mg g^?1 dry weight of microalga, respectively, has been recovered. Microscopic observation was used to assess a cell wall breakage through bead milling, which produced positive results in terms of increasing the yield of biomolecules of interest. Thus, under the same operating conditions, the yield of total lipid extract, chlorophyll and carotenoids increased significantly. Moreover, the addition of a polar co-solvent to a raw microalga had a considerable effect on the final extract. Overall, the addition of 5 % w v^?1 ethanol to a raw microalga increased the total extract yield by 27 %, and bead milling increased the total extract yield by 16 %. Chlorophyll and carotenoids were also significantly affected by the addition of ethanol, with an 81 and 65 % increase with a raw microalga and a 61 and 52 % increase using bead milling, respectively.     

Ulva lactuca and U. flexuosa (Chlorophyta,Ulvophyceae) cultivation in Brazilian tropical waters: recruitment,growth, and ulvan yield

Ulva spp. are used in a wide range of commercial applications, including bioremediation, food, bioenergy, pharmaceuticals, and agriculture. The sulfated polysaccharide ulvan obtained from Ulva spp. is of interest for triggering plant defenses against disease. However, the cultivation of Ulva spp. is still in its infancy. This study verified the feasibility of cultivating Ulva lactuca and Ulva flexuosa at two sites on the tropical Brazilian coast. We investigated the following: (a) methods to induce sporulation, (b) comparison of seeding ropes inoculated in vitro versus seeding at sea over 40 days, (c) production and harvest cycles at 15 and 30 days, (d) growth productivity of U. flexuosa at sea and in outdoor tanks, and (e) comparison of ulvan yields from biomass cultivated in tanks and the sea. High nutrient treatment was the most efficient method to induce sporulation (7,540?±?3,133 spores m^?1). Sea-based cultivation of U. flexuosa was only successful at one site. Seeding of ropes in vitro was more efficient than seeding at sea (0.31?±?0.20 g m^?2 day^?1), and 15-day harvest cycles were most efficient (20.1?±?1.8 % day^?1; 0.46?±?0.11 g m^?2 day^?1). Despite differences in plant growth in tanks (27.9?±?4.4 % day^?1) and at sea (20.1?±?1.8 % day^?1), the dry biomass and ulvan yields (17.7?±?5.0 %) did not differ between these systems. Cultivation of U. flexuosa was feasible at sea using in vitro seeding with a production cycle of 15 days in Brazilian tropical waters and tanks with high irradiance and enriched seawater.     

Fuel Characteristics of Solid Biofuel Derived from Oil Palm Biomass and Fast Growing Timber Species in Malaysia

The fuel characteristics of solid biofuels derived from biomass that is abundantly available in Malaysia are presented. The objectives of the study were to characterize fuel properties of oil palm biomass (empty fruit bunch (EFB) and oil palm trunk (OPT)) and wood from a range of fast growing timber species (Albizia falcataria, Acacia spp., Endospermum spp. and Macaranga spp.), inclusive and exclusive of bark. Among the fast-growing timber species, the higher heating values ranged from 4288 cal g^-1 to 4383 cal g^-1 for wood inclusive of bark, and 4134 cal g^-1 to 4343 cal g^-1 for wood exclusive of bark. The inclusive of bark portion in the biomass sample generally increased the heating value except for Macaranga spp. Empty fruit bunch and oil palm trunk had heating values of 4315 cal g^-1 and 4104 cal g^-1, respectively. Ash-forming elements and trace elements were much higher in the timber species samples inclusive of bark than samples exclusive of bark. On the other hand, oil palm biomass contained higher ash-forming elements and trace elements than the wood from the fast growing timber species. The European energy crops show higher HHV, Cl and Si content but lower K, Mg, Na and P compared to the local biomass used in this study. The data obtained from this study can serve as a foundation for the selection of suitable biomass to be used as solid fuel, or as a reference on the fabrication of conversion systems for the selection of biomass solid fuel.     

Improvement of biomass and fatty acid productivity in ocean cultivation of <Emphasis Type="Italic">Tetraselmis</Emphasis> sp. using hypersaline medium

In this study, hypersaline media were used for ocean cultivation of the marine microalga Tetraselmis sp. KCTC12432BP for enhanced biomass and fatty acid (FA) productivity. Hypersaline media (55, 80, and 105 PSU) were prepared without sterilization by addition of NaCl to seawater obtained from Incheon, Korea. The highest biomass productivity was obtained at 55 PSU (0.16 g L^?1 day^?1) followed by 80 PSU (0.15 g L^?1 day^?1). Although the specific growth rate of Tetraselmis decreased at salinities higher than 55 PSU, prevention of contamination led to higher biomass productivity at 80 PSU than at 30 PSU (0.03 g L^?1 day^?1). FA content of algal biomass increased as salinity increased to 80 PSU, above which it declined, and FA productivity was highest at 80 PSU. Ocean cultivation of Tetraselmis was performed using 50-L tubular module photobioreactors and 2.5-kL square basic ponds, closed- and open-type ocean culture systems, respectively. Culturing microalgae in hypersaline medium (80 PSU) improved biomass productivities by 89 and 152% in closed and open cultures, respectively, compared with cultures with regular salinity. FA productivity was greatly improved by 369% in the closed cultures. The efficacy of salinity shift and N-deficiency to enhance FA productivity was also investigated. Lowering salinity to 30 PSU with N-starvation following cultivation at 80 PSU improved FA productivity by 19% in comparison with single-stage culture without N-deficiency at 30 PSU. The results show that salinity manipulation could be an effective strategy to improve biomass and FA productivity in ocean cultivation of Tetraselmis sp.     

Productivity, carbon dioxide uptake and net energy return of microalgal bubble column photobioreactors

This work examined the energy return of Chlorella vulgaris and Dunaliella tertiolecta cultivated in a gas-sparged photobioreactor design where the power input for sparging was manipulated (10, 20, and 50 W m⁻³). Dry weight, organic carbon and heating values of the biomass were measured, plus a suite of variables including Fv/Fm and dissolved oxygen. A model for predicting the higher heating value of microalgal biomass was developed and used to measure the energetic performance of batch cultivations. High power inputs enhanced maximum biomass yields, but did not improve the energy return. Cultivation in 10 W m⁻³ showed up to a 39% higher cumulative net energy return than 50 W m⁻³, and increased the cumulative net energy ratio up to fourfold. The highest net energy ratio for power input was 19.3 (D. tertiolecta, 12% CO₂, 10 W m⁻³). These systems may be a sustainable method of biomass production, but their effectiveness is sensitive to operational parameters.     

Energy Demands of Nitrogen Supply in Mass Cultivation of Two Commercially Important Microalgal Species, <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Dunaliella tertiolecta</Emphasis>

Mass culture of microalgae is a potential alternative to cultivation of terrestrial crops for bioenergy production. However, microalgae require nitrogen fertiliser in quantities much higher than plants, and this has important consequences for the energy balance of these systems. The effect of nitrogen fertiliser supplied to microalgal bubble-column photobioreactor cultures was investigated using different nitrogen sources (nitrate, urea, ammonium) and culture conditions (air, 12% CO₂). In 20 L cultivations, maximum biomass productivity for Chlorella vulgaris cultivated using nitrate and urea was 0.046 and 0.053 g L⁻¹ day⁻¹, respectively. Maximum biomass productivity for Dunaliella tertiolecta cultivated using nitrate, urea and ammonium was 0.033, 0.038 and 0.038 g L⁻¹ day⁻¹, respectively. In intensive bubble-column photobioreactors using 12% CO₂, maximum productivity reached 0.60 and 0.83 g L⁻¹ day⁻¹ for C. vulgaris and D. tertiolecta, respectively. Recycling of nitrogen within the photobioreactor system via algal exudation of nitrogenous compounds and bacterial activity was identified as a potentially important process. The energetic penalty incurred by supply of artificial nitrogen fertilisers, phosphorus, power and CO₂ to microalgal photobioreactors was investigated, although analysis of all energy burdens from biomass production to usable energy carriers was not conducted. After subtraction of the power, nitrogen and phosphorus energy burdens, maximum net energy ratios for C. vulgaris and D. tertiolecta cultivated in bubble columns were 1.82 and 2.10. Assuming CO₂ was also required from a manufactured source, the net energy ratio decreased to 0.09 and 0.11 for C. vulgaris and D. tertiolecta, so that biomass production in this scenario was unsustainable. Although supply of nitrogen is unlikely to be the most energetically costly factor in sparged photobioreactor designs, it is still a very significant penalty. There is a need to optimise both cultivation strategies and recycling of nitrogen in order to improve performance. Data are supported by measurements including biochemical properties (lipid, protein, heating value) and bacterial number by epifluorescence microscopy.