Synthesis, receptor binding affinities and conformational properties of cyclic methylenedithioether analogues of angiotensin II

Cyclic 12-, 13- and 14-membered ring angiotensin II analogues related to disulfides but encompassing methylene-dithioether bridges have been prepared. The affinity data from these derivatives were compared to those from the disulfides. The methylenedithioether analogues displayed good binding affinities to rat liver AT1 receptors although in most cases somewhat lower than their disulfide counterparts. One of the methylenedithioethers with a 13-membered ring system demonstrated the highest binding affinity among the thioethers. Theoretical conformational analysis of model compounds of the two series were performed suggesting a similarity between the disulfide and the corresponding methylenedithioether analogues and also between the ring size homologues. This analysis also suggested that some of the model compounds were prone to adopt inverse gamma-turn conformations, which was further supported by use of NMR spectroscopy of the 12-membered ring analogue in the series. The easily executed methylenedithioether cyclization should constitute a valuable complement to the common disulfide methodology for fine-tuning and for probing the bioactive conformation of peptides.     

Carbacyclic peptide mimetics as VCAM-VLA-4 antagonists

Substitution of carbon for sulfur in a potent 13-membered cyclic disulfide containing peptide was accomplished via an intramolecular Wittig reaction and resulted in a series of 'carba' analogues. Potency in the VCAM-VLA-4 assay was sensitive to ring size and lower than that of the parent disulfide.     

Conformational analysis of enkephalin analogs containing a disulfide bond. Models for delta- and mu-receptor opioid agonists

Conformational analysis of the cyclic opioids H-Tyr-D-Pen-Gly-Phe-D-Pen-OH (DPDPE) and H-Tyr-D-Cys-Gly-Phe-D-Cys-OH (DCDCE) have been performed using the AMBER program. DPDPE is considerably more selective for delta-receptors than DCDCE. Using the RNGCFM program, a large number of ways were found to close the 14-membered disulfide-containing ring structure. However, intramolecular hydrogen bonds were only possible in gamma-turn and inverse gamma-turn conformations centered on the glycine residue which were associated with opposite chiralities of the disulfide bond. With the cyclic part of the molecules in either a gamma-turn or inverse gamma-turn, a systematic conformational analysis was performed on the tyrosine and phenylalanine sidechains. This showed that conformers with the tyrosine and phenylalanine phenyl rings in the vicinity of the disulfide bond were preferred due to attractive van der Waals forces. For DPDPE, however, this was only possible with a positive dihedral angle for the disulfide bond due to the presence of the beta-carbon methyls of Pen2. In contrast, these preferred conformers were possible with both chiralities of the disulfide bond in DCDCE. Conformational entropies and free energies were computed from the translational, rotational, and vibrational energy levels available to each conformer. The conformational entropies were found to vary significantly and to result in a re-ordering of the lowest energy minima. Based on these conformational differences in DPDPE and DCDCE and their differing pharmacological selectivities, tentative conformational preferences for delta- and mu-receptor opioid peptides are proposed.     

Synthetic peptide models for the redox-active disulfide loop of glutaredoxin. Conformational studies

Two cyclic peptide disulfides (Sequence: see text). (X = L-Tyr or L-Phe) have been synthesized as models for the 14-membered redox-active disulfide loop of glutaredoxin. 1H NMR studies at 270 MHz in chloroform solutions establish a type I beta-turn conformation for the Pro-X segment in both peptides, stabilized by a 4----1 hydrogen bond between the Cys(1) CO and Cys(4) NH groups. Nuclear Overhauser effects establish that the aromatic ring in the X = Phe peptide is oriented over the central peptide unit. In dimethyl sulfoxide solutions two conformational species are observed in slow exchange on the NMR time scale, for both peptides. These are assigned to type I and type II beta-turn structures with -Pro-Tyr(Phe)- as the corner residues. The structural assignments are based on correlation of NMR parameters with model 14-membered cyclic cystine peptides with Pro-X spacers. Circular dichroism studies based on the -S-S- n-omega* transition suggest a structural change in the disulfide bridge with changing solvent polarity, establishing conformational coupling between the peptide backbone and the disulfide linkage in these systems.     

Facile preparation of disulfide-bridged peptides using the polymer-supported oxidant CLEAR-OX.

Formation of disulfide bonds in synthetic peptides is one of the more challenging transformations to achieve in peptide chemistry, in view of the possible formation of oligomeric by-products and other side reactions, as well as occasional solubility problems in aqueous oxidizing media. It was shown previously that 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB identical with Ellman's reagent), when attached to polyethylene glycol-polystyrene (PEG-PS), controlled-pore glass (CPG), or modified Sephadex supports, was an effective oxidizing agent that promoted disulfide formation under mild conditions. More recently, this work was extended to Cross-Linked Ethoxylate Acrylate Resin (CLEAR) supports, because of their compatibility with both organic and aqueous solvent mixtures. The resultant new tool, termed CLEAR-OX, was used to conveniently produce several model cyclic disulfides with improved purities and yields, when compared with solution oxidations. A particularly striking example was the gram-scale oxidation of a urotensin II antagonist peptide containing a hindered penicillamine unit.     

Cyclic thioether peptide mimetics as VCAM-VLA-4 antagonists

Selective substitution of a sulfur atom by carbon in a highly potent 13-membered cyclic disulfide was accomplished by intramolecular displacement of a bromide. The potency of the resulting thioethers in the VCAM/VLA-4 assay was dependent on ring size and the position of the sulfur atom.     

The synthesis and evaluation of 10- and 12-membered ring benzofused enediyne amino acids

The enediyne moiety is a versatile functional group found in natural anticancer and anti-infective agents, undergoing the Bergman cyclization reaction to afford a diradical which cleaves double-stranded DNA. We have incorporated the enediyne group into 10- (4-10) and 12-membered ring (11) cyclic amino acids and dipeptides, respectively, and explored their relative reactivity toward cyclization, varying N-substitution in the case of the 10-membered ring substrate, which gave the expected cyclization products in good yields when using either thermal conditions in the presence or absence of microwave irradiation. The N-tosyl substituted derivative (4) was shown to nick double-stranded supercoiled DNA. N-Arylsulfonyl substitution on the ring promoted the cyclization, when compared to N-mesyl or acyl substitution, possibly because of a pi-pi stacking effect as an endo-relationship of the aryl group with the enediyne was demonstrated in both the solid state and in solution. The 12-membered ring enediyne dipeptide (11) was inert to the Bergman cyclization under a variety of conditions. When this substrate was irradiated with ultraviolet light, regio- and stereospecific reduction was observed in which one of the alkynes was reduced to a Z-olefin (47).     

Solid-phase synthesis and applications of N-(S-acetylmercaptoacetyl) peptides

The reagent pentafluorophenyl S-acetylmercaptoacetate was used to modify the N-terminus of resin-bound side-chain-protected peptides. The modification was carried out in an automated cycle in the final stage of fluorenylmethoxycarbonyl (Fmoc)/polyamide-mediated solid-phase synthesis. Side-chain deprotection and cleavage from the resin with aqueous trifluoroacetic acid gave the N-(S-acetylmercaptoacetyl) peptides. The S-acetylmercaptoacetyl peptides were transformed into reactive thiol-containing peptides by incubation with hydroxylamine at neutral pH. The S-deacetylation was performed in the presence of a sulfhydryl-reactive compound (or intramolecular group) to enable immediate capture of the sensitive thiol. Three applications were investigated. An S-acetylmercaptoacetyl peptide, containing a sequence of a meningococcal membrane protein, was incubated with hydroxylamine in the presence of 5-(iodoacetamido)fluorescein to give the corresponding fluorescein-labeled peptide in 62% yield. The same peptide was also S-deacetylated in the presence of bromoacetylated poly-L-lysine to afford a peptide/polylysine conjugate. Finally, a peptide corresponding to a sequence of herpes simplex virus glycoprotein D was prepared. This peptide, containing an N-terminal-S-acetylmercaptoacetyl group and an additional C-terminal S-(3-nitro-2-pyridinesulfenyl)cysteine residue, was converted into a cyclic disulfide peptide (20%).     

Disulfide structures of highly bridged peptides: a new strategy for analysis.

A new approach is described for analyzing disulfide linkage patterns in peptides containing tightly clustered cystines. Such peptides are very difficult to analyze with traditional strategies, which require that the peptide chain be split between close or adjacent Cys residues. The water-soluble tris-(2-carboxyethyl)-phosphine (TCEP) reduced disulfides at pH 3, and partially reduced peptides were purified by high performance liquid chromatography with minimal thiol-disulfide exchange. Alkylation of free thiols, followed by sequencer analysis, provided explicit assignment of disulfides that had been reduced. Thiol-disulfide exchange occurred during alkylation of some peptides, but correct deductions were still possible. Alkylation competed best with exchange when peptide solution was added with rapid mixing to 2.2 M iodoacetamide. Variants were developed in which up to three alkylating agents were used to label different pairs of thiols, allowing a full assignment in one sequencer analysis. Model peptides used included insulin (three bridges, intra- and interchain disulfides; -Cys.Cys- pair), endothelin and apamin (two disulfides; -Cys.x.Cys- pair), conotoxin GI and isomers (two disulfides; -Cys.Cys- pair), and bacterial enterotoxin (three bridges within 13 residues; two -Cys.Cys- pairs). With insulin, all intermediates in the reduction pathway were identified; with conotoxin GI, analysis was carried out successfully for all three disulfide isomers. In addition to these known structures, the method has been applied successfully to the analysis of several previously unsolved structures of similar complexity. Rates of reduction of disulfide bonds varied widely, but most peptides did not show a strongly preferred route for reduction.     

A conformational comparison of two stereoisomeric cyclic dermorphin analogues employing NMR and computer simulations

In a continuation of our program to study the structure-activity relationship of peptide opiates, we report the conformational analysis of two cyclic tetrapeptides related to dermorphin--Tyr-c[D-Orn-Phe-Asp]-NH2 and Tyr-c[D-Asp-Phe-Orn]-NH2. These analogues have similar binding properties marked by a high selectivity for the mu-opioid receptors because of a drastic decrease in the affinity for the delta-opioid receptor. The conformational preferences of these analogues of dermorphin determined from proton nmr, molecular dynamics, and energy minimizations are quite similar. The constraint of the 13-membered ring formed from cyclization is quite evident from the conformational analysis. The constrained ring system acts as a template maintaining the relative orientation of the exocyclic tyrosine and side chain of phenylalanine. Two intramolecular hydrogen bonds measured for the D-Orn analogue in DMSO were disrupted upon the addition of water. For the D-Asp analogue, two intramolecular hydrogen bonds were found stable in DMSO and water. The global conformations of the two peptides determined from nuclear Overhauser effects did not change with the solvent titration. The difference in the hydrogen bonding within the 13-membered ring may account for the slight differences observed in the efficacy of the analogues at the mu-opioid receptors.     

Redox-active bis-cysteinyl peptides. II. Comparative study on the sequence-dependent tendency for disulfide loop formation

Bis (cysteinyl) octapeptides related to the active sites of the oxidoreductases protein disulfide isomerase (PDI), thioredoxin reductase (trr), glutaredoxin (grx), and thioredoxin (trx) were analyzed for their propensity to form the intramolecular 14-membered disulfide ring in oxidation experiments. The rank order of percentage of cyclic monomer formed in aqueous buffer (pH 7.0) at 10^?3 M concentration was found to be very similar, but opposite to that of the K_ox and, correspondingly, of the redox potentials of the native enzymes. Attempts to induce intrinsic conformational preferences of the peptides by addition of trifluoroethanol led to enhancements of β-turn structures as reflected by the CD and Fourier transform ir spectra. The induced secondary structure, instead of aligning the tendencies of the excised fragments for loop formation with those of the intact proteins, was found to suppress the differences by significantly increasing the preference for cyclic monomers (≈ 90%). Similarly, operating under denaturing conditions, i.e., in 6M guanidinium hydrochloride, only for the trx peptide was the statistical product distribution obtained. For the remaining peptides, again a strong increase of cyclic monomer contents was observed that could not be correlated with dissolution of β-sheet type aggregates. The CD spectra are more consistent with the presence of ordered structure to some extent, possibly resulting from an hydrophobic collapse of the sparingly soluble peptides. The results of the oxidation experiments further support previous findings from thiol disulfide interchange equilibria, which clearly revealed a decisive role of the characteristic thioredoxin structural motif in dictating the redox properties of the enzymes. Point mutations in the active sites of the oxidoreductases allowed us to affect their redox potentials strongly, but apparently only in the constraint form of the three-dimensional structure as similar exchanges in the excised fragments did not produce the expected effect. This observation contrasts with numerous reports that the conformation of short disulfide loops is mainly dictated by the amino acid sequence. © 1994 John Wiley & Sons, Inc. © 1994 John Wiley & Sons, Inc.     

A biomimetic strategy in the synthesis and fragmentation of cyclic protein.

This paper describes a simple biomimetic strategy to prepare small cyclic proteins containing multiple disulfide bonds. Our strategy involves intramolecular acyl transfer reactions to assist both the synthesis and fragmentation of these highly constrained cyclic structures in aqueous solution. To illustrate our strategy, we synthesized the naturally occurring circulin B and cyclopsychotride (CPT), both consisting of 31 amino acid residues tightly packed in a cystine-knot motif with three disulfide bonds and an end-to-end cyclic form. The synthesis of these small cyclic proteins can be achieved by orthogonal ligation of free peptide thioester via the thia zip reaction, which involves a series of reversible thiol-thiolactone exchanges to arrive at an alpha-amino thiolactone, which then undergoes an irreversible, spontaneous ring contraction through an S,N-acyl migration to form the cyclic protein. A two-step disulfide formation strategy is employed for obtaining the desired disulfide-paired products. Partial acid hydrolysis through intramolecular acyl transfer of X-Ser, X-Thr, Asp-X, and Glu-X sequences is used to obtain the assignment of the circulins disulfide bond connectives. Both synthetic circulin B and CPT are identical to the natural products and, thus, the total synthesis confirms the disulfide connectivity of circulin B and CPT contain a cystine-knot motif of 1-4, 2-5, and 3-6. In general, our strategy, based on the convergence of chemical proteolysis and aminolysis of peptide bonds through acyl transfer, is biomimetic and provides a useful approach for the synthesis and characterization of large end-to-end cyclic peptides and small proteins.     

Cyclic enkephalin-deltorphin hybrids containing a carbonyl bridge: structure and opioid activity

Six hybrid N-ureidoethylamides of octapeptides in which an N-terminal cyclic structure related to enkephalin was elongated by a C-terminal fragment of deltorphin were synthesized on MBHA resin. The synthetic procedure involved deprotection of Boc groups with HCl/dioxane and cleavage of the peptide resin with 45 % TFA in DCM. d-Lys and d-Orn were incorporated in position 2, and Lys, Orn, Dab, or Dap in position 5. The side chains of the dibasic amino function were protected with the Fmoc group. This protection was removed by treatment with 55 % piperidine in DMF, and cyclization was achieved by treatment with bis-(4-nitrophenyl)carbonate. Using various combinations of dibasic amino acids, peptides containing a 17-, 18-, 19- or 20-membered ring structure were obtained. The peptides were tested in the guinea-pig ileum (GPI) and mouse vas deferens (MVD) assays. Diverse opioid activities were observed, depending on the size of the ring. Extension of the enkephalin sequence at the C-terminus by a deltorphin fragment resulted in a change of receptor selectivity in favor of the δ receptor. The conformational propensities of selected peptides were determined using the EDMC method in conjunction with data derived from NMR experiments carried out in water. This approach allowed proper examination of the dynamical behavior of these small peptides. The results were compared with those obtained earlier with corresponding N-(ureidoethyl)pentapeptide amides.     

Effects of conformational constraint in 2- and 8-cycloleucine analogues of oxytocin and [1-penicillamine] oxytocin examined by circular dichroism and biosassay

The analogues of oxytocin and [1-penicillamine]oxytocin, containing a cycloleucine (Cle) residue in position 2 or 8, were investigated by means of circular dichroism measurements in different solvents, and the results examined in terms of their biological activities. A cycloleucine residue in position 2 substantially reduces the free conformational space of the hormone 20-membered ring moiety (including the disulfide group), and stabilizes a conformation which is close to one of the possible conformations of oxytocin and involves a -turn. In position 8, the Cle residue affects the conformation of the Tyr² side chain, apparently forcing it away from the space above the 20-membered disulfide ring. However, it does not appear that the Cle residue has any significant effect on the overall backbone conformation of the hormone. The steric effect of the penicillamine residue in position 1 on the conformation of the disulfide group and Tyr² side chain from previous investigations is further confirmed. The synthesis and biological potency of [1-penicillamine, 8-cycloleucine]oxytocin is described. This analogue exhibits a strong inhibitory effect on the uterotonic activity of oxytocinin vitro. It also inhibited the vasopressor response to vasopressin.     

Large scale ab initio modeling of structurally uncharacterized antimicrobial peptides reveals known and novel folds

Antimicrobial resistance within a wide range of infectious agents is a severe and growing public health threat. Antimicrobial peptides (AMPs) are among the leading alternatives to current antibiotics, exhibiting broad spectrum activity. Their activity is determined by numerous properties such as cationic charge, amphipathicity, size, and amino acid composition. Currently, only around 10% of known AMP sequences have experimentally solved structures. To improve our understanding of the AMP structural universe we have carried out large scale ab initio 3D modeling of structurally uncharacterized AMPs that revealed similarities between predicted folds of the modeled sequences and structures of characterized AMPs. Two of the peptides whose models matched known folds are Lebocin Peptide 1A (LP1A) and Odorranain M, predicted to form β-hairpins but, interestingly, to lack the intramolecular disulfide bonds, cation-π or aromatic interactions that generally stabilize such AMP structures. Other examples include Ponericin Q42, Latarcin 4a, Kassinatuerin 1, Ceratotoxin D, and CPF-B1 peptide, which have α-helical folds, as well as mixed αβ folds of human Histatin 2 peptide and Garvicin A which are, to the best of our knowledge, the first linear αββ fold AMPs lacking intramolecular disulfide bonds. In addition to fold matches to experimentally derived structures, unique folds were also obtained, namely for Microcin M and Ipomicin. These results help in understanding the range of protein scaffolds that naturally bear antimicrobial activity and may facilitate protein design efforts towards better AMPs.     

Optimizing the connectivity in disulfide-rich peptides: alpha-conotoxin SII as a case study

We describe a strategy for the efficient, unambiguous assignment of disulfide connectivities in alpha-conotoxin SII, of which approximately 30% of its mass is cysteine, as an example of a generalizable technique for investigation of cysteine-rich peptides. alpha-Conotoxin SII was shown to possess 3-8, 2-18, and 4-14 disulfide bond connectivity. Sequential disulfide bond connectivity analysis was performed by partial reduction with Tris(2-carboxyethyl)phosphine and real-time mass monitoring by direct-infusion electrospray mass spectrometry (ESMS). This method achieved high yields of the differentially reduced disulfide bonded intermediates and economic use of reduced peptide. Intermediates were alkylated with either N-phenylmaleimide or 4-vinylpyridine. The resulting alkyl products were assigned by ESMS and their alkyl positions sequentially identified via conventional Edman degradation. The methodology described allows a more efficient, rapid, and reliable assignment of disulfide bond connectivity in synthetic and native cysteine-rich peptides.     

Characterization of Escherichia coli thioredoxins with altered active site residues

Escherichia coli thioredoxin is a small disulfide-containing redox protein with the active site sequence Cys-Gly-Pro-Cys-Lys. Mutations were made in this region of the thioredoxin gene and the mutant proteins expressed in E. coli strains lacking thioredoxin. Mutant proteins with a 17-membered or 11-membered disulfide ring were inactive in vivo. However, purified thioredoxin with the active site sequence Cys-Gly-Arg-Pro-Cys-Lys is still able to serve as a substrate for thioredoxin reductase and a reducing agent in the ribonucleotide reductase reaction, although with greatly reduced catalytic efficiency. A smaller disulfide ring, with the active site sequence Cys-Ala-Cys, does not turn over at a sufficient rate to be an effective reducing agent. Strain in the small ring favors the formation of intermolecular disulfide bonds. Alteration of the invariant proline to a serine has little effect on redox activity. The function of this residue may be in maintaining the stability of the active site region rather than participation in redox activity or protein-protein interactions. Mutation of the positively charged lysine in the active site to a glutamate residue raises the Km values with interacting enzymes. Although it has been proposed that the positive residue at position 36 is conserved to maintain the thiolate anion on Cys-32 (Kallis & Holmgren, 1985), the presence of the negative charge at this position does not alter the pH dependence of activity or fluorescence behavior. The lysine is most likely conserved to facilitate thioredoxin-protein interactions.     

Synthesis and biological evaluation of the disulfide form of the glutathione analogue gamma-(L-glutamyl)-L-cysteinyl-L-aspartyl-L-cysteine

By using the chain to chain mode of cyclization the title glutathione analogue (4), containing the 11-membered disulfide ring replacing the native -Cys-Gly fragment, has been synthesized and characterized together with its reduced dithiol form gamma-Glu-Cys-Asp-Cys (5). The activity of (4) with gamma-glutamyl-transferase and glutathione reductase has been evaluated and compared with those of the two conformationally restricted glutathione analogues (2) and (3) previously reported.     

Structural characterization of the 16-kDa allergen, RA17, in rice seeds. Prediction of the secondary structure and identification of intramolecular disulfide bridges

The 16-kDa rice allergen, RA17, belonging to the alpha-amylase/trypsin inhibitor family was isolated from rice seed and structurally characterized by identifying cystine-containing peptides and predicting the secondary structure and hydrophobic regions. Eight peptides, which constitute three sets of cystine-containing peptides, were purified by HPLC from a thermolytic digest of RA17 and identified by their amino acid sequence and composition, indicating five intramolecular disulfide bridges: Cys34-Cys94, Cys26-(Cys50 or Cys51)-Cys110 and Cys12-(Cys62 or Cys64)-Cys122. Analyses of the CD spectrum and the Chou-Fasman prediction suggested that RA17 had some helical- and sheet-structure regions. Based on these experimental and predicted data, RA17 is proposed to be a globular molecule with a small hydrophobic core having folding restricted by five intramolecular disulfide bridges.     

Tigerinins: novel antimicrobial peptides from the Indian frog Rana tigerina

Four broad-spectrum, 11 and 12 residue, novel antimicrobial peptides have been isolated from the adrenaline-stimulated skin secretions of the Indian frog Rana tigerina. Sequences of these peptides have been determined by automated Edman degradation, by mass spectral analysis and confirmed by chemical synthesis. These peptides, which we have named as tigerinins, are characterized by an intramolecular disulfide bridge between two cysteine residues forming a nonapeptide ring. This feature is not found in other amphibian peptides. Conformational analysis indicate that the peptides tend to form beta-turn structures. The peptides are cationic and exert their activity by permeabilizing bacterial membranes. Tigerinins represent the smallest, nonhelical, cationic antimicrobial peptides from amphibians.