Effect of protein concentration on the molecular weight of delta5-3-ketosteroid isomerase.

The molecular weight of delta-5-3-ketosteroid isomerase from Pseudomonas testosteroni was determined by means of sedimentation equilibrium and exclusion chromatography over a wide range of enzyme concentrations in 0.2 M potassium phosphate buffer, pH 7.0. In addition, the sedimentation constant of the enzyme was determinded over an extended range of concentrations. The enzyme was found to have a molecular weight of 26,000 plus or equal to 1,000, suggesting that it is a dimer of identical or similar 13,400 molecular weight polypeptide chains. In the ultracentrifuge this dimeric species was found to undergo aggregation at enzyme concentrations above 2 mg per ml and dissociation at enzyme concentrations below 0.05 mg per ml. Exclusion chromatography studies indicate that under the conditions of chromatography the oligomeric enzyme is partially dissociated at enzyme concentrations in the range 0.2 to 0.002 mug per ml. These results suggest that under conditions of enzyme assay in 0.2 M potassium phosphate buffer, pH 7.0, isomerase is in a monomeric state of aggregation.     

Physicochemical properties of isocitrate dehydrogenase from lactating bovine mammary gland: effect of substrates and cofactors

The influence of substrates and cofactors on the oligomeric structure of the cytosolic form of NADP+-specific isocitrate dehydrogenase (IDH) from lactating bovine mammary gland was investigated using analytical ultracentrifugation and kinetic methods. In guanidine-HCl, the monomer molecular weight for reduced and carboxymethylated IDH was found to be 50,000 to 52,000. In nondenaturing solvents IDH behaves as a homogeneous solute with a molecular weight of 97,200. When added separately, manganous isocitrate, isocitrate, manganous citrate (substrate analog), and a mixture of the substrate analog and NADP+ do not significantly alter the sedimentation coefficient or the molecular weight of IDH as judged by direct observation of the enzyme at 0.1 to 3 microM using sedimentation velocity and equilibrium. Active enzyme sedimentation (AES) was used to assess the degree of dissociation of IDH at lower concentrations, and Kd for the dimer-monomer equilibrium was estimated to be 2 nM. In enzymatic studies, the specific activity at several levels of substrate does not vary as the subunit concentration of enzyme is reduced from 10 to 0.3 nM. Estimates for Kd by AES indicate the presence of a significant fraction of monomer at assay concentrations of 1 nM and below, where the weight fraction of monomer is predicted to be 0.6. If the monomer has a lower activity than the dimer, a drop in specific activity is expected below 1 nM. Significant decreases occur only when the IDH is not protected from denaturation. The concentration of cytoplasmic IDH in bovine mammary tissue is estimated to be 5.7 microM, at least 100-fold greater than our estimates of Kd. Since over 90% of the enzyme is present in the dimeric form, ligand-induced changes in aggregation state cannot play a significant role in the regulation of the cytosolic form of IDH in situ in this tissue.     

The purification and characterisation of 4-chlorobenzoate:CoA ligase and 4-chlorobenzoyl CoA dehalogenase from Arthrobacter sp. strain TM-1

4-Chlorobenzoate:CoA ligase, the first enzyme in the pathway for 4-chlorobenzoate dissimilation, has been partially purified from Arthrobacter sp. strain TM-1, by sequential ammonium sulphate precipitation and chromatography on DEAE-Sepharose and Sephacryl S-200. The enzyme, a homodimer of subunit molecular mass approximately 56 kD, is dependent on Mg2+-ATP and coenzyme A, and produces 4-chlorobenzoyl CoA and AMP. Besides Mg2+, Mn2+, Co2+, Fe2+ and Zn2+ are also stimulatory, but not Ca2+. Maximal activity is exhibited at pH 7.0 and 25 degrees C. The ligase demonstrates broad specificity towards other halobenzoates, with 4-chlorobenzoate as best substrate. The apparent Michaelis constants (Km) of the enzyme for 4-chlorobenzoate, CoA and ATP were determined as 3.5, 30 and 238 microM respectively. 4-Chlorobenzoyl CoA dehalogenase, the second enzyme, has been purified to homogeneity by sequential column chromatography on hydroxyapatite, DEAE-Sepharose and Sephacryl S-200. It is a homotetramer of 33 kD subunits with an isoelectric point of 6.4. At pH 7.5 and 30 degrees C, Km and kcat for 4-CBCoA are 9 microM and 1 s(-1) respectively. The optimum pH is 7.5, and maximal enzymic activity occurs at 45 degrees C. The properties of this enzyme are compared with those of the 4-chlorobenzoyl CoA dehalogenases from Arthrobacter sp. strain 4-CB1 and Pseudomonas sp. strain CBS-3, which differ variously in their N-terminal amino acid sequences, optimal pH values, pI values and/or temperatures of maximal activity.     

Studies of the quaternary structure and the chemical properties of phosphoribosylpyrophosphate synthetase from Salmonella typhimurium.

Phosphoribosylpyrophosphate (PRPP) synthetase (EC 2.7.6.1) was purified to virtual homogeneity from Salmonella typhimurium cells by a modification of previously published procedures. The molecular weight of the subunit was determined to be 31,000 +/- 3,000 by polyacrylamide gel electrophoresis in sodium dodecyl sulfate and sedimentation equilibrium analysis of the enzyme dissolved in 6 M guanidine hydrochloride. The amino acid composition of the enzyme was determined. Proline was identified as the only NH2-terminal residue. PRPP synthetase is apparently composed of identical or nearly identical subunits. NATIVE PRPP synthetase exists in multiple states of aggregation under all conditions. However, two predominant states were demonstrated under certain conditions. A form with molecular weight of 320,000 +/- 20,000 was found at pH 7.5 in the presence of MgATP. At pH 8.2 to 8.6, with or without MgATP, the predominant form corresponded to a molecular weight of 150,000 to 200,000; sedimentation equilibrium and velocity analysis indicated 160,000 +/- 15,000 as the most reliable molecular weight. More highly aggregated forms were observed at 4 degrees and higher protein concentrations. Removal of inorganic phosphate from PRPP synthetase by dilution or dialysis resulted in disaggregation. The fundamental unit of PRPP synthetase appears to consist of five (or possibly six) subunits, which can associate to form a dimer (10 or 12 subunits) and more highly aggregated forms. A pentameric subunit structure is consistent with the multiple species resolved by electrophoresis of the native enzyme in discontinuous polyacrylamide gel systems. Visualization of PRPP synthetase by negative staining with uranyl acetate and electron microscopy revealed fields of very asymmetric molecules, the dimensions of which corresponded to the M = 160,000 form. Dimers and higher aggregates of this unit were also seen. An unusual model, in which the five subunits are asymmetrically arranged, accounts very well for the electron microscopic appearance of the enzyme. The tendency of the enzyme to aggregate is viewed as a consequence of the unsatisfied bonding regions of the fundamental asymmetric unit.     

Catalytically active monomer of class mu glutathione transferase from rat

Although rat glutathione transferase M1-1 is crystallized as a homodimer (GST M1-1), we have generated monomers (GST M1) of the enzyme by adding potassium bromide to buffer solutions containing the wild-type enzyme and by introducing point mutations in the electrostatic region of the subunit interface. The wild-type enzyme was evaluated in 0.05 M MES (pH 6.5) containing up to 3 M KBr. We report that the addition of KBr greatly influences the monomer-dimer equilibrium of the wild-type enzyme and that at 3 M KBr GST M1 has a specific activity close to that of GST M1-1. Since the effect of KBr is likely due to charge screening at the subunit interface, the influence on the monomer-dimer equilibrium exerted by the amino acid residues in the electrostatic region of the interface (Arg77, Asp97, Glu100, Asn101) was investigated. Mutations introduced at positions 97, 100, and 101 promote monomerization, resulting in enzymes that exhibit a decreased weight average molecular weight in comparison to that of the wild-type enzyme. However, only mutations at position 97 result in enzymes that have catalytic activity in the monomeric form. The mutations introduced at positions 100 or 101 result in enzymes whose activity can be accounted for by the amount of dimeric enzyme present. Our results indicate that the electrostatic region of the interface is important in the monomer-dimer equilibrium of glutathione transferase and that, although GST M1-1 may be more active than GST M1, the dimer is not required for catalytic function.     

Purification and properties of Bacillus subtilis aspartate transcarbamylase.

Aspartate transcarbamylase from Bacillus subtilis has been purified to apparent homogeneity. A subunit molecular weight of 33,500 +/- 1,000 was obtained from electrophoresis in polyarcylamide gels containing sodium dodecyl sulfate and from sedimentation equilibrium analysis of the protein dissolved in 6 M guanidine hydrochloride. The molecular weight of the native enzyme was determined to be 102,000 +/- 2,000 by sedimentation velocity and sedimentation equilibrium analysis. Aspartate transcarbamylase thus appears to be a trimeric protein; cross-linking with dimethyl suberimidate and electrophoretic analysis confirmed this structure. B. subtilis aspartate transcarbamylase has an amino acid composition quite similar to that of the catalytic subunit from Escherichia coli aspartate transcarbamylase; only the content of four amino acids is substantially different. The denaturated enzyme has one free sulfhydryl group. Aspartate transcarbamylase exhibited Michaelis-Menten kinetics and was neither inhibited nor activated by nucleotides. Several anions stimulated activity 2- to 5-fold. Immunochemical studies indicated very little similarity between B. subtilis and E. coli aspartate transcarbamylase or E. coli aspartate transcarbamylase catalytic subunit.     

Purification properties and subunit composition of pig heart lipoate acetyltransferase.

Lipoate acetyltransferase [acetyl-CoA: dihydrolipoate S-acetyl-transferase, EC 2.3.1.12], the core enzyme of the pyruvate dehydrogenase complex, has been highly purified by gel chromatography on Sepharose 6B and sucrose density gradient centrifugation in the presence of potassium iodide. The native enzyme has a sedimentation coefficient (S020,W) of 26.7S and a diffusion coefficient (D020,W) of 1.25 x 10(-7) cm2.-sec-1. The weight-average molecular weight was estimated to be 1.8 million from the sedimentation equilibrium data. The content of right-handed alpha helix in the enzyme molecule was estimated to be about 25% by optical rotatory dispersion and about 22% from the circular dichroism spectra. The enzyme was found to contain about 23 moles of protein-bound lipoic acid per mole of enzyme; some other properties are also reported. Lipoate acetyltransferase dissociated to yield a single subunit with a molecular weight of 74,000 as estimated by polyacrylamide gel electrophoresis in sodium dodecyl sulfate and by gel filtration on Bio-Gel in 6 M guanidine-HCl. The molecular weight was also estimated to be 74,000 from sedimentation equilibrium data in 6 M guanidine-HCl] containing 0.1 M 2-mercaptoethanol. Evidence is presented that 1 molecule of lipoate acetyltransferase apparently consists of 24 very similar subunits, each of which contains NH2-terminal alanine. Each subunit contains 1 molecule of covalently bound lipoic acid.     

Functional importance of Crenarchaea-specific extra-loop revealed by an X-ray structure of a heterotetrameric crenarchaeal splicing endonuclease

Archaeal splicing endonucleases (EndAs) are currently classified into three groups. Two groups require a single subunit protein to form a homodimer or homotetramer. The third group requires two nonidentical protein components for the activity. To elucidate the molecular architecture of the two-subunit EndA system, we studied a crenarchaeal splicing endonuclease from Pyrobaculum aerophilum. In the present study, we solved a crystal structure of the enzyme at 1.7-Å resolution. The enzyme adopts a heterotetrameric form composed of two catalytic and two structural subunits. By connecting the structural and the catalytic subunits of the heterotetrameric EndA, we could convert the enzyme to a homodimer that maintains the broad substrate specificity that is one of the characteristics of heterotetrameric EndA. Meanwhile, a deletion of six amino acids in a Crenarchaea-specific loop abolished the endonuclease activity even on a substrate with canonical BHB motif. These results indicate that the subunit architecture is not a major factor responsible for the difference of substrate specificity between single- and two-subunit EndA systems. Rather, the structural basis for the broad substrate specificity is built into the crenarchaeal splicing endonuclease itself.     

Molecular masses and sedimentation coefficients of extracellular hemoglobin of Glossoscolex paulistus: alkaline oligomeric dissociation

The giant extracellular hemoglobin of Glossoscolex paulistus (HbGp) has a molecular mass (M) of 3600±100 kDa and a standard sedimentation coefficient (s20,w0) of 58 S, estimated by analytical ultracentrifugation (AUC). In the present work, further AUC studies were developed for HbGp, at pH 10.0, which favors oligomeric dissociation into lower M species. The HbGp oligomer is formed by globin chains a, b, c and d plus the linker chains. The pure monomeric fraction, subunit d, and HbGp at pH 10.0, in the presence of β-mercaptoethanol, were also studied. Our results indicate that for samples of pure subunit d, besides the monomeric species with s20,w0 of 2.0 S, formation of dimer of subunit d is observed with s20,w0 of around 2.9 S. For the whole HbGp at pH 10.0 contributions from monomers, trimers and linkers are observed. No contribution from 58 S species was observed for the sample of oxy-HbGp at pH 10.0, showing its complete dissociation. For cyanomet-HbGp form a contribution of 17% is observed for the un-dissociated oligomer, consistent with data from other techniques that show the cyanomet-form is more stable as compared to oxy-HbGp. Masses of HbGp subunits, especially trimer abc and monomeric chains a, b, c and d, were also estimated from sedimentation equilibrium data, and are in agreement with the results from MALDI-TOF-MS.     

Pseudocatalase from Lactobacillus plantarum: evidence for a homopentameric structure containing two atoms of manganese per subunit

An improved procedure for the isolation of the pseudocatalase of Lactobacillus plantarum has been devised, and the quaternary structure and manganese content of this enzyme have been reexamined. Sedimentation equilibrium of the native enzyme at several salt concentrations gave a molecular weight of 172 000. The subunit weight, obtained by sedimentation equilibrium in 6.4 M guanidinium chloride, with or without prior reduction and carboxymethylation, was 34 kilodaltons. The amino acid composition indicated 150 Arg + Lys, and after exhaustive tryptic digestion, 32 peptides were resolved. These data suggest that the pseudocatalase is a homopentamer. Cross-linking with dimethyl suberimidate, followed by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate, yielded five major bands, another indication of pentameric structure. The manganese content was found to be 1.8-2.4 per subunit. S20,W was found to be 9.6 S and f/f0 = 1.2, suggesting a globular structure of Stokes radius 44 A.     

Ribonucleic acid is a component of the oligomeric, transformed mouse AtT-20 cell glucocorticoid receptor

The glucocorticoid receptor from mouse AtT-20 pituitary tumor cells exists in three forms. The largest form is an untransformed (non-DNA-binding), oligomeric species (9.1 S, 8.3 nm, Mr 319 000). Two transformed (DNA-binding) forms can be generated. One is an oligomeric protein (5.2 S, 6-8.3 nm, Mr 132 000-182 000), while the other is the monomeric, hormone-binding subunit (3.8 S, 6 nm, Mr 96 000). The composition of the oligomeric, transformed receptor and its relationship to the monomeric protein were examined. The 3.8S monomer can be isolated from DEAE-cellulose (0.12 M step elution) in a form that continues to sediment at about 3.8 S on molybdate-containing sucrose gradients and at about 4.2 S on molybdate-free gradients. Addition of a non-hormone-binding component isolated from the same DEAE-cellulose column (0.5 M KCl step) can apparently interact with the 3.8-4.2 S monomer, increasing its sedimentation coefficient to 5.2 S (on molybdate-containing gradients) or 6.6 S (on low-salt, molybdate-free gradients). This factor is a macromolecule (nondialyzable) and is heat-stable (100 degrees C, 20 min). A dose-dependent shift to the higher sedimentation coefficient is observed when increasing quantities of the 0.5 M step material are added to the receptor monomer. This activity is abolished when the 0.5 M step material is treated with ribonuclease A. Further, when RNA is purified from the 0.5 M step by phenol/chloroform extraction, its ability to increase the S value of the monomer is retained. Ribonuclease treatment of the untransformed, 9.1S, oligomeric complex does not cause a significant decrease in sedimentation rate, while the same treatment of the 5.2S, oligomeric, transformed receptor (obtained after Sephadex G-25 transformation) causes a decrease in sedimentation rate to about 3.8 S. The addition of bovine liver mRNA and rRNA does not cause a shift in sedimentation rate of the receptor monomer to a discrete, higher sedimenting receptor form. However, the addition of total rabbit liver tRNA or three distinct tRNA species causes a shift in sedimentation to a similar, but not identical, form as that with the 0.5 M step material. We propose that the 5.2S, oligomeric transformed glucocorticoid receptor is composed of one monomeric hormone-binding, protein subunit (Mr 96 000) and a low molecular weight RNA (Mr 36 000). This interaction may be important for the role of the receptor in regulating gene expression.     

A stable intermediate in the thermal unfolding process of a chimeric 3-isopropylmalate dehydrogenase between a thermophilic and a mesophilic enzymes.

The thermal unfolding process of a chimeric 3-isopropylmalate dehydrogenase made of parts from an extreme thermophile, Thermus thermophilus, and a mesophile, Bacillus subtilis, enzymes was studied by CD spectrophotometry and differential scanning calorimetry (DSC). The enzyme is a homodimer with a subunit containing two structural domains. The DSC melting profile of the chimeric enzyme in 20 mM NaHCO3, pH 10.4, showed two endothermic peaks, whereas that of the T. thermophilus wild-type enzyme had one peak. The CD melting profiles of the chimeric enzyme under the same conditions as the DSC measurement, also indicated biphasic unfolding transition. Concentration dependence of the unfolding profile revealed that the first phase was protein concentration-independent, whereas the second transition was protein concentration-dependent. When cooled after the first transition, the intermediate was isolated, which showed only the second transition upon heating. These results indicated the existence of a stable dimeric intermediate followed by the further unfolding and dissociation in the thermal unfolding of the chimeric enzyme at pH 10-11. Because the portion derived from the mesophilic isopropylmalate dehydrogenase in the chimeric enzyme is located in the hinge region between two domains of the enzyme, it is probably responsible for weakening of the interdomain interaction and causing the decooperativity of two domains. The dimeric form of the intermediate suggested that the first unfolding transition corresponds to the unfolding of domain 1 containing the N- and C-termini of the enzyme, and the second to that of domain 2 containing the subunit interface.     

Purification, properties, and oligomeric structure of glutathione reductase from the cyanobacterium Spirulina maxima

Glutathione reductase [NAD(P)H:GSSG oxidoreductase EC 1.6.4.2] from cyanobacterium Spirulina maxima was purified 1300-fold to homogeneity by a simple three-step procedure involving ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose, and affinity chromatography on 2',5'-ADP-Sepharose 4B. Optimum pH was 7.0 and enzymatic activity was notably increased when the phosphate ion concentration was increased. The enzyme gave an absorption spectrum that was typical for a flavoprotein in that it had three peaks with maximal absorbance at 271, 370, and 460 nm and a E1%271 of 23.3 Km values were 120 +/- 12 microM and 3.5 +/- 0.9 microM for GSSG and NADPH, respectively. Mixed disulfide of CoA and GSH was also reduced by the enzyme under assay conditions, but the enzyme had a very low affinity (Km 3.3 mM) for this substrate. The enzyme was specific for NADPH. The isoelectric point of the native enzyme at 4 degrees C was 4.35 and the amino acid composition was very similar to that previously reported from other sources. The molecular weight of a subunit under denaturing conditions was 47,000 +/- 1200. Analyses of pure enzyme by a variety of techniques for molecular weight determination revealed that, at pH 7.0, the enzyme existed predominantly as a tetrameric species in equilibrium with a minor dimer fraction. Dissociation into dimers was achieved at alkaline pH (9.5) or in 6 M urea. However, the equilibrium at neutral pH was not altered by NADPH or by disulfide reducing reagents. The Mr and S20,w of the oligomeric enzyme were estimated to be 177,000 +/- 14,000 and 8.49 +/- 0.5; for the dimer, 99,800 +/- 7000 and 5.96 +/- 0.4, respectively. Low concentrations of urea increased the enzymatic activity, but this increase was not due to changes in the proportions of both forms.     

Carboxylesterases (EC 3.1.1). The molecular sizes of chicken and pig liver carboxylesterases.

The molecular size of pig liver carboxylesterase has been investigated under a variety of conditions of pH and ionic strength. From equilibrium and velocity sedimentation at pH 4.0 and pH 7.5, and from chromatography on Sephadex G-200,we conclude that the monomeric molecular weight is similar to 65,000 daltons and that the enzyme associates to form trimers. Association equilibrium constants for the monomer-trimer system were estimated to be 0.02 1-2 g-2 at pH 4 (concentration-dependent molecular weight data) and 2 times 10-5 1-2g-2 at pH 7.5 (frontal gel chromatographic results). These studies were aided by comparisons of the properties of the pig liver enzyme with those of chicken liver carboxylesterase, which is shown to exhibit the velocity and equilibrium sedimentation characteristics of a homogeneous protein with molecular weight similar to 65,000. Studies of pig and chicken liver carboxylesterases in 6 M guanidinium chloride, 0.1 M in beta-mercaptoethanol, support the proposition that the monomeric species of these enzymes have molecular weights of similar to 65,000. On polyacrylamide gel electrophoresis in SDS, there is no evidence for a major species of molecular weight less than similar to 65,000 for the pig enzyme, but ca. 50 percent of the chicken esterase is dissociated into two species of molecular weight similar to 30,000.     

Subunit structure of biodegradative threonine deaminase.

The molecule weight of the biodegradative threonine deaminase from Escherichia coli was determined to be approximately 147,000 by sedimentation equilibrium ultracentrifugation. Similar experiments using 5 M guanidinium chloride gave a value of 39,000 for the molecular weight of the enzyme subunit. On sodium dodecyl sulfate-gel electrophoresis the enzyme also dissociated into a single subunit with an estimated molecular weight of 38,000. The NH2 terminus of the enzyme was determined to be methionine by the dinitrophenylation procedure. Quantitative analysis revealed that 3.6 mol of methionine were detected per 147,000 g of enzyme. The selective tritium labeling method established alanine as the COOH-terminal residue. The sequence of residues at the NH2 terminus, determined using an automated sequence analyzer, was: (formula: see text). The fact that a single amino acid was released at each degradation step in the above experiment strongly suggests that the subunits in the enzyme contain the same amino acid sequence. Therefore, the native enzyme with a molecular weight of 147,000 appears to be composed of four identical polypeptide subunits.     

Bovine kidney alkaline phosphatase. Purification, subunit structure, and metalloenzyme properties.

Kidney alkaline phosphatase was purified to homogeneity. It is a glycoprotein of about 172,000 molecular weight. Analyses of the subunit structure by sedimentation equilibrium in 6 M guanidine hydrochloride and by gel electrophoresis in sodium dodecyl sulfate indicate that the alkaline phosphatase is a dimer comprising two very similar or identical subunits of about 87,000 molecular weight. The native enzyme contains 4.5 +/- 0.2 g atoms of zinc per mol of protein. Reconstitution experiments from the apophosphatase show that binding of 4 Zn2+ per mol of dimer is essential for full activity. The kinetic data of Zn2+ binding to the apoprotein require at least a two-step mechanism, in which one of the steps corresponds to a conformational change within the enzyme. This paper also presents data concerning amino acid composition, sugar content, enzyme stability, absorbance index, and sedimentation velocity.     

Polypeptide molecular weights of the (Na+,K+)-ATPase from porcine kidney medulla

The molecular weights of the polypeptide chains from (Na+,K+)-ATPase of porcine kidney medulla have been determined by analytical sedimentation equilibrium. The alpha-subunit molecular weight is 93 900, and the beta subunit is a glycoprotein with a polypeptide molecular weight of 32 300 (41 400 including protein and carbohydrate). Amino acid and carbohydrate compositions are presented together with related properties (i.e., partial specific volumes, extinction coefficients, and hydrophobic/hydrophilic amino acid content).     

Associative properties of butyryl-coenzyme A synthetase from ox liver mitochondria.

Butyryl-coenzyme A synthetase (butyrate:CoA ligase (AMP-forming), EC 6.2.1.2) from an acetone-dried powder of ox liver mitochondria was found to have a molecular weight of approx. 40 000. The sedimentation equilibrium analysis suggested the presence in solution of higher molecular weight forms of the enzyme and these could also be obtained by extracting the enzyme from the mitochondrial powder in non-reducing conditions. The enzyme was inhibited by sulphydryl reagents, and was found to have at least one available thiol group/molecule. The relationship between enzymic activity and concentration was non-linear, and suggested that an inactive monomer-active dimer equilibrium was present. The 5--6-fold activation by bovine serum albumin required the presence of free thiol groups in the albumin and involved association of albumin with the enzyme.     

Molecular weights of nitrogenase components from Azotobacter vinelandii.

Meniscus depletion sedimentation equilibrium ultracentrifuge experiments were performed on purified MoFe and Fe proteins of $\text{Azotobacter vinelandii}$. The MoFe protein was found to have a molecular weight of 245,000, using an experimentally confirmed partial specific volume of 0.73. The MoFe protein formed one band on sodium dodecyl sulfate gel electrophoresis and had a subunit molecular weight of 56,000. The subunit molecular weight from ultracentrifuge experiments in 8 M urea was 61,000. The molecular weight of the Fe protein was calculated to be 60,500 in meniscus depletion experiments. Similar experiments in 8 M urea solvent indicated a subunit molecular weight of 30,000. A subunit molecular weight of 33,000 was obtained from sodium dodecyl sulfate gel electrophoresis experiments.     

Rat muscle 5'-adenylic acid aminohydrolase. I. Purification and subunit structure.

AMP deaminase (AMP aminohydrolase, EC 3.5.4.6) has been purified to apparent homogeneity from rat muscle. The preparation exhibits a single polypeptide band with a molecular weight of 60,000 on polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The enzyme has a sedimentation coefficient of 11.3 S. Analysis by sedimentation equilibrium techniques showed the nat-ive enzyme to have a molecular weight of 238,000, whereas the enzyme, when analyzed in 6 M guanidine hydrochloride and 10 mM 2-mercaptoethanol, had a molecular weight of only 59,500. The amino acid composition of the enzyme was determined and peptide mapping was performed on a tryptic digest of S-carboxymethylated enzyme. NH2-terminal analysis by both the dansylation and cyanate procedures failed to identify a free NH2 terminus. Treatment of the enzyme with carboxypeptidase A resulted in the release of approximately 0.5 mol each of valine and leucine per 60,000 g of enzyme. The data presented indicate that hte native enzyme has a tetrameric structure consisting of four polypeptide chains each having a molecular weight of 60,000. The COOH-terminal analysis can be interpreted either as an indication of subunit heterogeneity or as a result of incomplete digestion of a -X-Leu-Val sequence at the end of a single type of polypeptide chain. Tryptic peptide maps strongly support the latter interpretation and suggest that the subunits are essentially identical.