FLP protein of 2 mu circle plasmid of yeast induces multiple bends in the FLP recognition target site

The FLP recombinase of the 2 mu plasmid of Saccharomyces cerevisiae binds to a target containing three 13 base-pair symmetry elements called a, b and c. The symmetry elements b and c are in direct orientation while the a element is in inverted orientation with respect to b and c on the opposite side of an eight base-pair core region. Each symmetry element acts as a binding site for the FLP protein. The FLP protein can form three different complexes with the FLP recognition target (FRT site) according to the number of elements within the site that are occupied by the FLP protein. Binding of FLP to the FRT site induces DNA bending. We have measured the angles of bends caused by the binding of the FLP protein to full and partial FRT sites. We find that FLP induces three types of bend in the FRT-containing DNA. The type I bend is approximately 60 degrees and results from a molecule of FLP bound to one symmetry element. The type II bend is greater than 144 degrees and results from FLP molecules bound to symmetry elements a and b. The type III bend is approximately 65 degrees and results from FLP proteins bound to symmetry elements b and c. Certain FLP proteins that are defective in recombination can generate the type I and type III bends but are impaired in their ability to induce the type II bend. We discuss the role of bending in FLP-mediated recombination.     

Interaction of the FLP recombinase of the Saccharomyces cerevisiae 2 micron plasmid with mutated target sequences.

The 2 micron plasmid of Saccharomyces cerevisiae codes for a site-specific recombinase, the FLP protein, that catalyzes efficient recombination across two 599-base-pair (bp) inverted repeats of the plasmid DNA both in vivo and in vitro. We analyzed the interaction of the purified FLP protein with the target sequences of two point mutants that exhibit impaired FLP-mediated recombination in vivo. One mutation lies in one of the 13-bp repeat elements that had been previously shown to be protected from DNase digestion by the FLP protein. This mutation dramatically reduces FLP-mediated recombination in vitro and appears to act by reducing the binding of FLP protein to its target sequence. The second mutation lies within the 8-bp core region of the FLP target sequence. The FLP protein introduces staggered nicks surrounding this 8-bp region, and these nicks are thought to define the sites of strand exchange. The mutation in the core region abolishes recombination with a wild-type site. However, recombination between two mutated sites is very efficient. This result suggests that proper base pairing between the two recombining sites is an important feature of FLP-mediated recombination.     

Directionality in FLP protein-promoted site-specific recombination is mediated by DNA-DNA pairing

The 2 mu plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombination system consisting of plasmid-encoded FLP protein and two recombination sites on the plasmid. The recombination site possesses a specific orientation, which is determined by an asymmetric 8-base pair spacer sequence separating two 13-base pair inverted repeats. The outcome or directionality of site-specific recombination is defined by the alignment of two sites in the same orientation during the reaction. Sites containing point mutations or 1-base pair insertions or deletions within the spacer generally undergo recombination with unaltered sites at reduced levels. In contrast, recombination between the two identical mutant sites (where homology is restored) proceeds efficiently in all cases. Sites containing spacer sequences of 10 base pairs or more are nonfunctional under all conditions. A recombination site in which 5 base pairs are changed to yield an entirely symmetrical spacer sequence again recombines efficiently, but only with an identical site. This reaction, in addition, produces a variety of new products which can only result from random alignment of the two sites undergoing recombination, i.e. the reaction no longer exhibits directionality. These and other results demonstrate that both the efficiency and directionality of site-specific recombination is dependent upon homology between spacer sequences of the two recombining sites. This further implies that critical DNA-DNA interactions between the spacer region of the two sites involved in the reaction occur at some stage during site-specific recombination in this system. The specific spacer sequence itself appears to be unimportant as long as homology is maintained; thus, these sequences are probably not involved in recognition by FLP protein.     

FLP recombinase of the 2 microns circle plasmid of Saccharomyces cerevisiae bends its DNA target. Isolation of FLP mutants defective in DNA bending

The FLP recombinase is encoded by the yeast plasmid 2 microns circle and catalyses a site-specific recombination reaction that results in inversion of a segment of the 2 micron plasmid. We describe a method for the isolation of inactivating mutations in the FLP gene. The analysis of the recombination and binding activity of defective FLP proteins in vitro resulted in the identification of two classes of mutations: those that completely abolish FLP function by interfering with DNA binding and others that block recombination after the binding step. We have shown that FLP-mediated recombination is accompanied by bending of the DNA target and that mutations in the FLP recombinase that block bending also eliminate recombination.     

The minimal duplex DNA sequence required for site-specific recombination promoted by the FLP protein of yeast in vitro.

The 2-micron plasmid of the yeast Saccharomyces cerevisiae codes for a site-specific recombinase ('FLP') that efficiently catalyses recombination across the plasmid's two 599 bp repeats both in vivo and in vitro. We have used the partially purified FLP protein to define the minimal duplex DNA sequence required for intra- and intermolecular recombination in vitro. Previous DNase footprinting experiments had shown that FLP protected 50 bp of DNA around the recombination site. We made BAL31 deletions and synthetic FLP sites to show that the minimal length of the site that was able to recombine with a wild-type site was 22 bp. The site consists of two 7 bp inverted repeats surrounding an 8 bp core region. We also showed that the deleted sites recombined with themselves and that one of three 13 bp repeated elements within the FLP target sequence was not necessary for efficient recombination in vitro. Mutants lacking this redundant 13 bp element required a lower amount of FLP recombinase to achieve maximal yield of recombination than the wild type site. Finally, we discuss the structure of the FLP site in relation to the proposed function of FLP recombination in copy number amplification of the 2-micron plasmid in vivo.     

Mutagenesis of a conserved region of the gene encoding the FLP recombinase of Saccharomyces cerevisiae. A role for arginine 191 in binding and ligation.

The FLP recombinase from the 2 microns plasmid of Saccharomyces cerevisiae contains a region from amino acid 185 to 203 that is conserved among several FLP-like proteins from different yeasts. Using site-directed mutagenesis, we have made mutations in this region of the FLP gene. Five of twelve mutations in the region yielded proteins that were unable to bind to the FLP recombination target (FRT) site. A change of arginine at position 191 to lysine resulted in a protein (FLP-R191K) that could bind to the FRT site but could not catalyze recombination. This mutant protein accumulated as a stable protein-DNA complex in which one of the two bound FLP proteins was covalently attached to the DNA. FLP-R191K was defective in strand exchange and ligation and was unable to promote protein-protein interaction with half-FRT sites. The conservation of three residues in all members of the integrase family of site-specific recombinases (His305, Arg308, Tyr343 in FLP) implies a common mechanism of recombination. The conservation of arginine 191 and the properties of the FLP-R191K mutant protein suggest that this arginine also plays an important role in the mechanism of FLP-mediated site-specific recombination.     

Specific contacts between the FLP protein of the yeast 2-micron plasmid and its recombination site

Contact points between the FLP protein of the yeast 2-micron plasmid and its recombination site have been defined. Important features of the region previously defined as the minimal recombination site in vitro include a pair of 13-base pair inverted repeats separated by an 8-base pair spacer. The two FLP protein-binding sites within this region are 12 base pairs in length. In each case they include the internal 11 base pairs of one of the 13-base pair repeats, as well as the adjacent base pair within the spacer. The internal 6 base pairs within the spacer are not involved in binding or recognition by FLP protein. When the size of the spacer is increased or decreased by one base pair, the distance between the cleavage points is also increased or decreased correspondingly by one base pair. Points of cleavage are unaffected by changes in the spacer sequence. Specific contact points involving purine residues, identified by methylation protection and recombination interference experiments, are located in both the major and minor grooves of the DNA. Additional contact points between FLP protein and phosphate groups in the phosphate-deoxyribose backbone are clustered near the cleavage sites.     

The FLP protein contacts both major and minor grooves of its recognition target sequence.

The FLP protein of the 2 microns plasmid of Saccharomyces cerevisiae promotes conservative site-specific recombination between DNA sequences that contain the FLP recognition target (FRT). FLP binds to each of the three 13 base pair symmetry elements in the FRT site in a site-specific manner. We have probed both major and minor groove contacts of FLP using dimethyl sulphate, monoacetyl-4-hydroxyaminoquinoline 1-oxide and potassium permanganate and find that the protein displays extensive interactions with residues of both the major and minor grooves of 10 base pairs of each symmetry element. We find no evidence that the FRT site assumes a single-stranded conformation upon FLP binding.     

The FLP protein of the 2-micron plasmid of yeast. Inter- and intramolecular reactions

We have studied the mechanism of reaction of the FLP protein of the yeast 2-micron plasmid on linear substrates. The products of the reaction are dependent upon the concentration of FLP protein. At low concentrations of FLP, products resulting from intramolecular recombination between two FLP target sites accumulate. At higher concentrations of FLP, intermolecular recombination results in the accumulation of products which are larger than the starting substrate. At higher concentrations still, FLP-promoted recombination is inhibited. Potassium chloride (0.15 M) inhibits the intermolecular reaction and also prevents the inhibition of FLP-mediated recombination caused by high concentrations of FLP protein. We present a model that explains these findings.     

Purification of the FLP site-specific recombinase by affinity chromatography and re-examination of basic properties of the system.

The FLP protein, a site-specific recombinase encoded by the 2 micron plasmid of yeast, has been purified to near homogeneity from extracts of E. coli cells in which the protein has been expressed. The purification is a three column procedure, the final step employing affinity chromatography. The affinity ligand consists of a DNA polymer with multiple FLP protein binding sites arranged in tandem repeats. This protocol yields 2 mg of FLP protein which is 85% pure. The purified protein is highly active, stable for several months at -70 degrees C and free of detectable nucleases. The molecular weight and N-terminal sequence are identical to that predicted for the FLP protein by the DNA sequence of the gene. Purified FLP protein primarily, but not exclusively, promotes intramolecular recombination. Intermolecular recombination becomes the dominant reaction when E. coli extracts containing no FLP protein are added to the reaction mixture. These extracts are not specifically required for recombination, but demonstrate that some properties previously attributed to FLP protein can be assigned to contaminating proteins present in E. coli.     

Bent DNA is needed for recombinational enhancer activity in the site-specific recombination system Cin of bacteriophage P1. The role of FIS protein

A series of recombinational enhancer mutants was constructed by manipulating the ClaI site between the two FIS binding sites of the Hin enhancer. These mutants include insertions from two to 12 base-pairs and two deletions of one or two base-pairs. Recombinational enhancer activity was found only with four mutants carrying either a four base-pair substitution, ten base-pair insertions or a one base-pair deletion, respectively; two other ten base-pair insertion mutants, however, were inactive, although FIS protein binding was unaffected. So, besides binding of FIS protein to its specific sites within the enhancer sequence and the correct helical positioning of these sites on the DNA, another criterion for enhancer activity must be fulfilled. DNA bending assays identify this requirement as a change of the enhancer DNA conformation, which FIS protein is able to induce and to stabilize. This conformational change of the DNA can be blocked by mutations in the central segment between the two FIS binding sites of the Hin enhancer. This sequence has special functions for the recombinational enhancer activity.     

Protein-based asymmetry and protein-protein interactions in FLP recombinase-mediated site-specific recombination

When the FLP recombination target (FRT) is cut in half so that only one FLP protein-binding site is present, FLP protein forms a complex in which two such sites are linked head to head. Although held together exclusively by noncovalent interactions, this complex survives electrophoresis in an agarose gel and exhibits a half-life that can be measured in hours. Characterization of this complex indicates that a very stable, asymmetric dimeric complex of FLP protein monomers bound to the FRT is a likely early intermediate in FLP-mediated site-specific recombination. The apparent asymmetry is a property of the protein components of the complex. Even though the DNA components form a perfect palindrome, only one of the two possible DNA cleavage steps takes place in the course of complex formation. Formation of this complex does not occur with half-FRT site DNA substrates that preclude head to head monomer contact or when a FLP mutant protein is used that binds the FRT site but cannot cleave it. Trimeric and tetrameric complexes are also observed, the latter at very low frequency. These results are discussed in terms of an expanded model for early events in FLP-mediated site-specific recombination.     

FLP site-specific recombinase of yeast 2-micron plasmid. Topological features of the reaction

The 2-micron plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombinase (FLP) that promotes inversion across a unique site contained in each of the 599-base-pair inverted repeats of the plasmid. We have studied the topological changes generated in supercoiled substrates after exposure to the purified FLP protein in vitro. When a supercoiled substrate bearing two FLP target sequences in inverse orientation is treated with FLP, the products are multiply knotted structures that arise as a result of random entrapment of interdomainal supercoils. Likewise, a supercoiled substrate bearing two target sequences in direct orientation yields multiply interlocked catenanes as the product. Both types of substrate seem to be able to undergo repeated rounds of recombination that result in products of further complexity. The FLP protein also acts as a site-specific topoisomerase during the recombination reaction.     

Identification of the DNA-binding domain of the FLP recombinase

We have subjected the FLP protein of the 2-micron plasmid to partial proteolysis by proteinase K and have found that FLP can be digested into two major proteinase K-resistant peptides of 21 and 13 kDa, respectively. The 21-kDa peptide contains a site-specific DNA-binding domain that binds to the FLP recognition target (FRT) site with an affinity similar to that observed for the native FLP protein. This peptide can induce DNA bending upon binding to a DNA fragment containing the FRT site, but the angle of the bend (approximately 24 degrees) is smaller in magnitude than that induced by the native FLP protein (60 degrees). The additional DNA bending induced by the interaction between two native FLP molecules bound to the FRT site is not observed with the 21-kDa DNA-binding peptide. Amino-terminal sequencing has been used to map this peptide to an internal region of FLP that begins at residue Leu-148. It is likely that the DNA-binding peptide includes the catalytic site of the FLP protein.     

Reactions between half- and full-FLP recombination target sites. A model system for analyzing early steps in FLP protein-mediated site-specific recombination.

The FLP recombination target (FRT) can be cut in half so that only one FLP protein binding site is present (a "half site"). FLP protein binds the half sites and joins them into dimeric, asymmetric head-to-head complexes held together chiefly by strong noncovalent interactions. These complexes react with full (normal) FRT sites to generate a variety of products. Analysis of these DNA species reveals that the reaction follows a well-defined reaction pathway that generally parallels the normal reaction pathway. The system is useful in analyzing early steps in recombination, since the identity of the products in a given recombination event unambiguously pinpoints the order in which the cleavage and strand exchange reactions occur. Two conclusions are derived from the present study: (i) Formation of the dimeric head-to-head complex of half sites is a prerequisite to further steps in recombination. (ii) The identity of the base pairs at positions 6 and -6 within the FRT site has a subtle effect in directing the first strand exchange event in the reaction to predominantly one of two possible cleavage sites. In addition, results are presented that suggest that a DNA-DNA pairing intermediate involving only two base pairs of the core sequence is formed prior to the first cleavage and strand exchange. DNA-DNA interactions may therefore not be limited to the isomerization step that follows the first strand exchange.     

The FLP recombinase of the Saccharomyces cerevisiae 2 microns plasmid attaches covalently to DNA via a phosphotyrosyl linkage.

The FLP recombinase, encoded by the 2 micron plasmid of Saccharomyces cerevisiae, promotes efficient recombination in vivo and in vitro between its specific target sites (FLP sites). It was previously determined that FLP interacts with DNA sequences within its target site (B. J. Andrews, G. A. Proteau, L. G. Beatty, and P. D. Sadowski. Cell 40:795-803, 1985), generates a single-stranded break on both DNA strands within the FLP site, and remains covalently attached to the 3' end of each break. We now show that the FLP protein is bound to the 3' side of each break by an O-phosphotyrosyl residue and that it appears that the same tyrosyl residue(s) is used to attach to either DNA strand within the FLP site.     

The FLP protein of the 2-micron plasmid of yeast. Purification of the protein from Escherichia coli cells expressing the cloned FLP gene

Most laboratory strains of the yeast Saccharomyces cerevisiae contain many copies of an autonomously replicating plasmid called 2-micron circle DNA. This plasmid codes for a site-specific recombinase, the FLP protein which promotes recombination across two 599-base pair inverted repeats of the plasmid DNA. We have cloned the FLP gene under the control of a strong Escherichia coli promoter and have hyperproduced the protein in that organism. Cell-free extracts from this source promote highly efficient site-specific recombination in vitro and we have used this activity to purify the FLP protein substantially. The enzyme acts efficiently on circular and linear substrates and requires only monovalent or divalent cations for activity.     

DNA重组酶FLP原核表达与多步法纯化及其活性检测

DNA重组酶FLP存在于酵母2μ质粒上,能识别34bp的FRT位点,并根据2个FRT位点的相对方向完成位点间DNA序列的交换、重组、删除与逆转,在现代分子生物学理论研究与基因工程技术开发中具有广泛应用。构建了在原核大肠杆菌中高效表达FLP重组酶的表达载体pQE32-flpe并建立起相应的原核高效表达体系,在原核细菌大肠杆菌M15菌株中实现FLP酶蛋白的高效表达,同时建立了相应的纯化方法。纯化时先用硫酸铵沉淀法富集FLP酶蛋白,经透析脱盐后再用镍离子鳌合微柱(0.5~1.0mL)亲合层析梯度洗脱的方法获得纯化的FLP酶蛋白。通过构建含有2个方向相同的FRT序列位点的质粒pUC18-FRT-gfp-FRT和含有1个FRT位点的表达载体pET30a-FRT,并分别以其为底物来检测FLP重组酶的删除、交换与重组功能的活性。结果表明,该方法不仅能有效表达FLP酶蛋白,并能行之有效地纯化FLP酶蛋白,以及检测纯化的FLP酶蛋白对DNA序列的删除、重组与交换功能。该方法简单易行并能获得有活性的FLP酶蛋白,为深入研究其机理以及研发相应的DNA重组技术提供重要参考。     

Role of Escherichia coli IHF protein in lambda site-specific recombination. A mutational analysis of binding sites

The phage lambda attachment site, attP, contains three binding sites for an Escherichia coli protein, IHF, that is needed for efficient integrative recombination. We have used synthetic oligodeoxyribonucleotides to direct multiple base changes at each of these three sites. Alteration by two base-pairs of the consensus sequence for the leftmost binding site specifically interferes with IHF binding to that site and modestly depresses recombination in vitro. For each of the three binding sites, alteration of the consensus sequence by four base-pairs strongly depresses recombination in vitro, indicating that all three sites are important for attP function. The mutated attP sites are also depressed for recombination in vivo but some of the mutants are less affected than they are in vitro. The disparity between effects in vivo and in vitro for some mutants but not others suggests that the three binding sites are not functionally equivalent and that at some sites additional E. coli factors may replace or assist IHF. The non-equivalence of the three IHF sites is also indicated by the behavior of prophage attachment sites carrying mutations in the binding sites.