A high utility integrated map of the pig genome

Background

The domestic pig is being increasingly exploited as a system for modeling human disease. It also has substantial economic importance for meat-based protein production. Physical clone maps have underpinned large-scale genomic sequencing and enabled focused cloning efforts for many genomes. Comparative genetic maps indicate that there is more structural similarity between pig and human than, for example, mouse and human, and we have used this close relationship between human and pig as a way of facilitating map construction.

Results

Here we report the construction of the most highly continuous bacterial artificial chromosome (BAC) map of any mammalian genome, for the pig (Sus scrofa domestica) genome. The map provides a template for the generation and assembly of high-quality anchored sequence across the genome. The physical map integrates previous landmark maps with restriction fingerprints and BAC end sequences from over 260,000 BACs derived from 4 BAC libraries and takes advantage of alignments to the human genome to improve the continuity and local ordering of the clone contigs. We estimate that over 98% of the euchromatin of the 18 pig autosomes and the X chromosome along with localized coverage on Y is represented in 172 contigs, with chromosome 13 (218 Mb) represented by a single contig. The map is accessible through pre-Ensembl, where links to marker and sequence data can be found.

Conclusion

The map will enable immediate electronic positional cloning of genes, benefiting the pig research community and further facilitating use of the pig as an alternative animal model for human disease. The clone map and BAC end sequence data can also help to support the assembly of maps and genome sequences of other artiodactyls.     

Using comparative genomics to reorder the human genome sequence into a virtual sheep genome

Background

Is it possible to construct an accurate and detailed subgene-level map of a genome using bacterial artificial chromosome (BAC) end sequences, a sparse marker map, and the sequences of other genomes?

Results

A sheep BAC library, CHORI-243, was constructed and the BAC end sequences were determined and mapped with high sensitivity and low specificity onto the frameworks of the human, dog, and cow genomes. To maximize genome coverage, the coordinates of all BAC end sequence hits to the cow and dog genomes were also converted to the equivalent human genome coordinates. The 84,624 sheep BACs (about 5.4-fold genome coverage) with paired ends in the correct orientation (tail-to-tail) and spacing, combined with information from sheep BAC comparative genome contigs (CGCs) built separately on the dog and cow genomes, were used to construct 1,172 sheep BAC-CGCs, covering 91.2% of the human genome. Clustered non-tail-to-tail and outsize BACs located close to the ends of many BAC-CGCs linked BAC-CGCs covering about 70% of the genome to at least one other BAC-CGC on the same chromosome. Using the BAC-CGCs, the intrachromosomal and interchromosomal BAC-CGC linkage information, human/cow and vertebrate synteny, and the sheep marker map, a virtual sheep genome was constructed. To identify BACs potentially located in gaps between BAC-CGCs, an additional set of 55,668 sheep BACs were positioned on the sheep genome with lower confidence. A coordinate conversion process allowed us to transfer human genes and other genome features to the virtual sheep genome to display on a sheep genome browser.

Conclusion

We demonstrate that limited sequencing of BACs combined with positioning on a well assembled genome and integrating locations from other less well assembled genomes can yield extensive, detailed subgene-level maps of mammalian genomes, for which genomic resources are currently limited.     

Exploratory integration of peanut genetic and physical maps and possible contributions from Arabidopsis

Arachis hypogaea is a widely cultivated crop both as an oilseed and protein source. The genomic analysis of Arachis species hitherto has been limited to the construction of genetic maps; the most comprehensive one contains 370 loci over 2,210 cM in length. However, no attempt has been made to analyze the physical structure of the peanut genome. To investigate the practicality of physical mapping in peanut, we applied a total of 117 oligonucleotide-based probes (overgos) derived from genetically mapped RFLP probes onto peanut BAC filters containing 182,784 peanut large-insert DNA clones in a multiplex experimental design; 91.5% of the overgos identified at least one BAC clone. In order to gain insights into the potential value of Arabidopsis genome sequence for studies in divergent species with complex genomes such as peanut, we employed 576 Arabidopsis-derived overgos selected on the basis of maximum homology to orthologous sequences in other plant taxa to screen the peanut BAC library. A total of 353 (61.3%) overgos detected at least one peanut BAC clone. This experiment represents the first steps toward the creation of a physical map in peanut and illustrates the potential value of leveraging information from distantly related species such as Arabidopsis for both practical applications such as comparative map-based cloning and shedding light on evolutionary relationships. We also evaluated the possible correlation between functional categories of Arabidopsis overgos and their success rates in hybridization to the peanut BAC library.Electronic Supplementary Material Supplementary material is available for this article at     

A high-resolution physical map integrating an anchored chromosome with the BAC physical maps of wheat chromosome 6B

Background

A complete genome sequence is an essential tool for the genetic improvement of wheat. Because the wheat genome is large, highly repetitive and complex due to its allohexaploid nature, the International Wheat Genome Sequencing Consortium (IWGSC) chose a strategy that involves constructing bacterial artificial chromosome (BAC)-based physical maps of individual chromosomes and performing BAC-by-BAC sequencing. Here, we report the construction of a physical map of chromosome 6B with the goal of revealing the structural features of the third largest chromosome in wheat.

Results

We assembled 689 informative BAC contigs (hereafter reffered to as contigs) representing 91 % of the entire physical length of wheat chromosome 6B. The contigs were integrated into a radiation hybrid (RH) map of chromosome 6B, with one linkage group consisting of 448 loci with 653 markers. The order and direction of 480 contigs, corresponding to 87 % of the total length of 6B, were determined. We also characterized the contigs that contained a part of the nucleolus organizer region or centromere based on their positions on the RH map and the assembled BAC clone sequences. Analysis of the virtual gene order along 6B using the information collected for the integrated map revealed the presence of several chromosomal rearrangements, indicating evolutionary events that occurred on chromosome 6B.

Conclusions

We constructed a reliable physical map of chromosome 6B, enabling us to analyze its genomic structure and evolutionary progression. More importantly, the physical map should provide a high-quality and map-based reference sequence that will serve as a resource for wheat chromosome 6B.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1803-y) contains supplementary material, which is available to authorized users.     

A physical map of the bovine genome

Background

Cattle are important agriculturally and relevant as a model organism. Previously described genetic and radiation hybrid (RH) maps of the bovine genome have been used to identify genomic regions and genes affecting specific traits. Application of these maps to identify influential genetic polymorphisms will be enhanced by integration with each other and with bacterial artificial chromosome (BAC) libraries. The BAC libraries and clone maps are essential for the hybrid clone-by-clone/whole-genome shotgun sequencing approach taken by the bovine genome sequencing project.

Results

A bovine BAC map was constructed with HindIII restriction digest fragments of 290,797 BAC clones from animals of three different breeds. Comparative mapping of 422,522 BAC end sequences assisted with BAC map ordering and assembly. Genotypes and pedigree from two genetic maps and marker scores from three whole-genome RH panels were consolidated on a 17,254-marker composite map. Sequence similarity allowed integrating the BAC and composite maps with the bovine draft assembly (Btau3.1), establishing a comprehensive resource describing the bovine genome. Agreement between the marker and BAC maps and the draft assembly is high, although discrepancies exist. The composite and BAC maps are more similar than either is to the draft assembly.

Conclusion

Further refinement of the maps and greater integration into the genome assembly process may contribute to a high quality assembly. The maps provide resources to associate phenotypic variation with underlying genomic variation, and are crucial resources for understanding the biology underpinning this important ruminant species so closely associated with humans.     

Comparative BAC‐based physical mapping of Oryza sativa ssp. indica var. 93–11 and evaluation of the two rice reference sequence assemblies

Reference sequences are sequences that are used for public consultation, and therefore must be of high quality. Using the whole‐genome shotgun/next‐generation sequencing approach, many genome sequences of complex higher plants have been generated in recent years, and are generally considered reference sequences. However, none of these sequences has been experimentally evaluated at the whole‐genome sequence assembly level. Rice has a relatively simple plant genome, and the genome sequences for its two sub‐species obtained using different sequencing approaches were published approximately 10 years ago. This provides a unique system for a case study to evaluate the qualities and utilities of published plant genome sequences. We constructed a robust BAC physical map embedding a large number of BAC end sequences forrice variety 93–11. Through BAC end sequence alignments and tri‐assembly comparisons of the 93–11 physical map and the two reference sequences, we found that the Nipponbare reference sequence generated using the clone‐by‐clone approach has a high quality but still contains small artifact inversions and missing sequences. In contrast, the 93–11 reference sequence generated using the whole‐genome shotgun approach contains many large and varied assembly errors, such as inversions, duplications and translocations, as well as missing sequences. The 93–11 physical map provides an invaluable resource for evaluation and improvements toward completion of both Nipponbare and 93–11 reference sequences.     

BioNano genome mapping of individual chromosomes supports physical mapping and sequence assembly in complex plant genomes

The assembly of a reference genome sequence of bread wheat is challenging due to its specific features such as the genome size of 17 Gbp, polyploid nature and prevalence of repetitive sequences. BAC‐by‐BAC sequencing based on chromosomal physical maps, adopted by the International Wheat Genome Sequencing Consortium as the key strategy, reduces problems caused by the genome complexity and polyploidy, but the repeat content still hampers the sequence assembly. Availability of a high‐resolution genomic map to guide sequence scaffolding and validate physical map and sequence assemblies would be highly beneficial to obtaining an accurate and complete genome sequence. Here, we chose the short arm of chromosome 7D (7DS) as a model to demonstrate for the first time that it is possible to couple chromosome flow sorting with genome mapping in nanochannel arrays and create a de novo genome map of a wheat chromosome. We constructed a high‐resolution chromosome map composed of 371 contigs with an N50 of 1.3 Mb. Long DNA molecules achieved by our approach facilitated chromosome‐scale analysis of repetitive sequences and revealed a ~800‐kb array of tandem repeats intractable to current DNA sequencing technologies. Anchoring 7DS sequence assemblies obtained by clone‐by‐clone sequencing to the 7DS genome map provided a valuable tool to improve the BAC‐contig physical map and validate sequence assembly on a chromosome‐arm scale. Our results indicate that creating genome maps for the whole wheat genome in a chromosome‐by‐chromosome manner is feasible and that they will be an affordable tool to support the production of improved pseudomolecules.     

Assessment of the relationship between signal intensities and transcript concentration for Affymetrix GeneChip®arrays

Background

The availability of both mouse and human draft genomes has marked the beginning of a new era of comparative mammalian genomics. The two available mouse genome assemblies, from the public mouse genome sequencing consortium and Celera Genomics, were obtained using different clone libraries and different assembly methods.

Results

We present here a critical comparison of the two latest mouse genome assemblies. The utility of the combined genomes is further demonstrated by comparing them with the human 'golden path' and through a subsequent analysis of a resulting conserved sequence element (CSE) database, which allows us to identify over 6,000 potential novel genes and to derive independent estimates of the number of human protein-coding genes.

Conclusion

The Celera and public mouse assemblies differ in about 10% of the mouse genome. Each assembly has advantages over the other: Celera has higher accuracy in base-pairs and overall higher coverage of the genome; the public assembly, however, has higher sequence quality in some newly finished bacterial artifical chromosome clone (BAC) regions and the data are freely accessible. Perhaps most important, by combining both assemblies, we can get a better annotation of the human genome; in particular, we can obtain the most complete set of CSEs, one third of which are related to known genes and some others are related to other functional genomic regions. More than half the CSEs are of unknown function. From the CSEs, we estimate the total number of human protein-coding genes to be about 40,000. This searchable publicly available online CSEdb will expedite new discoveries through comparative genomics.     

Genome evolution in Reptilia: <Emphasis Type="Italic">in silico</Emphasis> chicken mapping of 12,000 BAC-end sequences from two reptiles and a basal bird

Background

With the publication of the draft chicken genome and the recent production of several BAC clone libraries from non-avian reptiles and birds, it is now possible to undertake more detailed comparative genomic studies in Reptilia. Of interest in particular are the genomic events that transformed the large, repeat-rich genomes of mammals and non-avian reptiles into the minimalist chicken genome. We have used paired BAC end sequences (BESs) from the American alligator (Alligator mississippiensis), painted turtle (Chrysemys picta) and emu (Dromaius novaehollandiae) to investigate patterns of sequence divergence, gene and retroelement content, and microsynteny between these species and chicken.

Results

From a total of 11,967 curated BESs, we successfully mapped 725, 773 and 2597 sequences in alligator, turtle, and emu, respectively, to sites in the draft chicken genome using a stringent BLAST protocol. Most commonly, sequences mapped to a single site in the chicken genome. Of 1675, 1828 and 2936 paired BESs obtained for alligator, turtle, and emu, respectively, a total of 34 (alligator, 2%), 24 (turtle, 1.3%) and 479 (emu, 16.3%) pairs were found to map with high confidence and in the correct orientation and with BAC-sized intermarker distances to single chicken chromosomes, including 25 such paired hits in emu mapping to the chicken Z chromosome. By determining the insert sizes of a subset of BAC clones from these three species, we also found a significant correlation between the intermarker distance in alligator and turtle and in chicken, with slopes as expected on the basis of the ratio of the genome sizes.

Conclusion

Our results suggest that a large number of small-scale chromosomal rearrangements and deletions in the lineage leading to chicken have drastically reduced the number of detected syntenies observed between the chicken and alligator, turtle, and emu genomes and imply that small deletions occurring widely throughout the genomes of reptilian and avian ancestors led to the ~50% reduction in genome size observed in birds compared to reptiles. We have also mapped and identified likely gene regions in hundreds of new BAC clones from these species.

     

Integration of animal linkage and BAC contig maps using overgo hybridization

The alignment of genome linkage maps, defined primarily by segregation of sequence-tagged site (STS) markers, with BAC contig physical maps and full genome sequences requires high throughput mechanisms to identify BAC clones that contain specific STS. A powerful technique for this purpose is multi-dimensional hybridization of "overgo" probes. The probes are chosen from available STS sequence data by selecting unique probe sequences that have a common melting temperature. We have hybridized sets of 216 overgo probes in subset pools of 36 overgos at a time to filter-spotted chicken BAC clone arrays. A four-dimensional pooling strategy, including one degree of redundancy, has been employed. This requires 24 hybridizations to completely assign BACs for all 216 probes. Results to date are consistent with about a 10% failure rate in overgo probe design and a 15-20% false negative detection rate within a group of 216 markers. Three complete rounds of overgo hybridization, each to sets of about 39,000 BACs (either BAMHI or ECORI partial digest inserts) generated a total of 1853 BAC alignments for 517 mapped chicken genome STS markers. These data are publicly available, and they have been used in the assembly of a first generation BAC contig map of the chicken genome.     

A first generation physical map of the medaka genome in BACs essential for positional cloning and clone-by-clone based genomic sequencing

In order to realize the full potential of the medaka as a model system for developmental biology and genetics, characterized genomic resources need to be established, culminating in the sequence of the medaka genome. To facilitate the map-based cloning of genes underlying induced mutations and to provide templates for clone-based genomic sequencing, we have created a first-generation physical map of the medaka genome in bacterial artificial chromosome (BAC) clones. In particular, we exploited the synteny to the closely related genome of the pufferfish, Takifugu rubripes, by marker content mapping. As a first step, we clustered 103,144 public medaka EST sequences to obtain a set of 21,121 non-redundant sequence entities. Avoiding oversampling of gene-dense regions, 11,254 of EST clusters were successfully matched against the draft sequence of the fugu genome, and 2363 genes were selected for the BAC map project. We designed 35mer oligonucleotide probes from the selected genes and hybridized them against 64,500 BAC clones of strains Cab and Hd-rR, representing 14-fold coverage of the medaka genome. Our data set is further supplemented with 437 results generated from PCR-amplified inserts of medaka cDNA clones and BAC end-fragment markers. Our current, edited, first generation medaka BAC map consists of 902 map segments that cover about 74% of the medaka genome. The map contains 2721 markers. Of these, 2534 are from expressed sequences, equivalent to a non-redundant set of 2328 loci. The 934 markers (724 different) are anchored to the medaka genetic map. Thus, genetic map assignments provide immediate access to underlying clones and contigs, simplifying molecular access to candidate gene regions and their characterization.     

RS-SNP: a random-set method for genome-wide association studies

Background

Common carp is one of the most important aquaculture teleost fish in the world. Common carp and other closely related Cyprinidae species provide over 30% aquaculture production in the world. However, common carp genomic resources are still relatively underdeveloped. BAC end sequences (BES) are important resources for genome research on BAC-anchored genetic marker development, linkage map and physical map integration, and whole genome sequence assembling and scaffolding.

Result

To develop such valuable resources in common carp (Cyprinus carpio), a total of 40,224 BAC clones were sequenced on both ends, generating 65,720 clean BES with an average read length of 647 bp after sequence processing, representing 42,522,168 bp or 2.5% of common carp genome. The first survey of common carp genome was conducted with various bioinformatics tools. The common carp genome contains over 17.3% of repetitive elements with GC content of 36.8% and 518 transposon ORFs. To identify and develop BAC-anchored microsatellite markers, a total of 13,581 microsatellites were detected from 10,355 BES. The coding region of 7,127 genes were recognized from 9,443 BES on 7,453 BACs, with 1,990 BACs have genes on both ends. To evaluate the similarity to the genome of closely related zebrafish, BES of common carp were aligned against zebrafish genome. A total of 39,335 BES of common carp have conserved homologs on zebrafish genome which demonstrated the high similarity between zebrafish and common carp genomes, indicating the feasibility of comparative mapping between zebrafish and common carp once we have physical map of common carp.

Conclusion

BAC end sequences are great resources for the first genome wide survey of common carp. The repetitive DNA was estimated to be approximate 28% of common carp genome, indicating the higher complexity of the genome. Comparative analysis had mapped around 40,000 BES to zebrafish genome and established over 3,100 microsyntenies, covering over 50% of the zebrafish genome. BES of common carp are tremendous tools for comparative mapping between the two closely related species, zebrafish and common carp, which should facilitate both structural and functional genome analysis in common carp.     

The Korea brassica genome project: a glimpse of the brassica genome based on comparative genome analysis with Arabidopsis

A complete genome sequence provides unlimited information in the sequenced organism as well as in related taxa. According to the guidance of the Multinational Brassica Genome Project (MBGP), the Korea Brassica Genome Project (KBGP) is sequencing chromosome 1 (cytogenetically oriented chromosome #1) of Brassica rapa. We have selected 48 seed BACs on chromosome 1 using EST genetic markers and FISH analyses. Among them, 30 BAC clones have been sequenced and 18 are on the way. Comparative genome analyses of the EST sequences and sequenced BAC clones from Brassica chromosome 1 revealed their homeologous partner regions on the Arabidopsis genome and a syntenic comparative map between Brassica chromosome 1 and Arabidopsis chromosomes. In silico chromosome walking and clone validation have been successfully applied to extending sequence contigs based on the comparative map and BAC end sequences. In addition, we have defined the (peri)centromeric heterochromatin blocks with centromeric tandem repeats, rDNA and centromeric retrotransposons. In-depth sequence analyses of five homeologous BAC clones and an Arabidopsis chromosomal region reveal overall co-linearity, with 82% sequence similarity. The data indicate that the Brassica genome has undergone triplication and subsequent gene losses after the divergence of Arabidopsis and Brassica. Based on in-depth comparative genome analyses, we propose a comparative genomics approach for conquering the Brassica genome. In 2005 we intend to construct an integrated physical map, including sequence information from 500 BAC clones and integration of fingerprinting data and end sequence data of more than 100 000 BAC clones. The sequences have been submitted to GenBank with accession numbers: 10 204 BAC ends of the KBrH library (CW978640-CW988843); KBrH138P04, AC155338; KBrH117N09, AC155337; KBrH097M21, AC155348; KBrH093K03, AC155347; KBrH081N08, AC155346; KBrH080L24, AC155345; KBrH077A05, AC155343; KBrH020D15, AC155340; KBrH015H17, AC155339; KBrH001H24, AC155335; KBrH080A08, AC155344; KBrH004D11, AC155341; KBrH117M18, AC146875; KBrH052O08, AC155342.     

Human BAC ends

The Human BAC Ends database includes all non-redundant human BAC end sequences (BESs) generated by The Institute for Genomic Research (TIGR), the University of Washington (UW) and California Institute of Technology (CalTech). It incorporates the available BAC mapping data from different genome centers and the annotation results of each end sequence for the contents of repeats, ESTs and STS markers. For each BAC end the database integrates the sequence, the phred quality scores, the map and the annotation, and provides links to sites of the library information, the reports of GenBank, dbGSS and GDB, and other relevant data. The database is freely accessible via the web and supports sequence or clone searches and anonymous FTP. The relevant sites and resources are described at http://www.tigr.org/ tdb/humgen/bac_end_search/bac_end_intro.html     

AFLP-derived SCARs facilitate construction of a 1.1 Mb sequence-ready map of a region that spans the Vf locus in the apple genome

The availability of high-density anchored markers is a prerequisite for reliable construction of a deep coverage BAC contig, which leads to creation of a sequence-ready map in the target chromosomal region. Unfortunately, such markers are not available for most plant species, including woody perennial plants. Here, we report on an efficient approach to build a megabase-size sequence-ready map in the apple genome for the Vf region containing apple scab resistance gene(s) by targeting AFLP-derived SCAR markers to this specific genomic region. A total of 11 AFLP-derived SCAR markers, previously tagged to the Vf locus, along with three other Vf-linked SCAR markers have been used to screen two apple genome BAC libraries. A single BAC contig which spans the Vf region at a physical distance of approximately 1,100 kb has been constructed by assembling the recovered BAC clones, followed by closure of inter-contig gaps. The contig is 4 ×deep, and provides a minimal tiling path of 16 contiguous and overlapping BAC clones, thus generating a sequence-ready map. Within the Vf region, duplication events have occurred frequently, and the Vf locus is restricted to the ca. 290 kb region covered by a minimum of three overlapping BAC clones.     

A BAC-based integrated linkage map of the silkworm Bombyx mori

Background

In 2004, draft sequences of the model lepidopteran Bombyx mori were reported using whole-genome shotgun sequencing. Because of relatively shallow genome coverage, the silkworm genome remains fragmented, hampering annotation and comparative genome studies. For a more complete genome analysis, we developed extended scaffolds combining physical maps with improved genetic maps.

Results

We mapped 1,755 single nucleotide polymorphism (SNP) markers from bacterial artificial chromosome (BAC) end sequences onto 28 linkage groups using a recombining male backcross population, yielding an average inter-SNP distance of 0.81 cM (about 270 kilobases). We constructed 6,221 contigs by fingerprinting clones from three BAC libraries digested with different restriction enzymes, and assigned a total of 724 single copy genes to them by BLAST (basic local alignment search tool) search of the BAC end sequences and high-density BAC filter hybridization using expressed sequence tags as probes. We assigned 964 additional expressed sequence tags to linkage groups by restriction fragment length polymorphism analysis of a nonrecombining female backcross population. Altogether, 361.1 megabases of BAC contigs and singletons were integrated with a map containing 1,688 independent genes. A test of synteny using Oxford grid analysis with more than 500 silkworm genes revealed six versus 20 silkworm linkage groups containing eight or more orthologs of Apis versus Tribolium, respectively.

Conclusion

The integrated map contains approximately 10% of predicted silkworm genes and has an estimated 76% genome coverage by BACs. This provides a new resource for improved assembly of whole-genome shotgun data, gene annotation and positional cloning, and will serve as a platform for comparative genomics and gene discovery in Lepidoptera and other insects.     

A comprehensive radiation hybrid map of the bovine genome comprising 5593 loci

A bovine whole genome 7000-rad radiation hybrid (RH) panel, SUNbRH(7000-rad), was constructed to build a high-resolution RH map. The Shirakawa-USDA linkage map served as a scaffold to construct a framework map of 3216 microsatellites on which 2377 ESTs were ordered. The resulting RH map provided essentially complete coverage across the genome, with 1 cR7000 corresponding to 114 kb, and a cattle-human comparative map of 1716 bovine genes and sequences annotated in the human genome, which covered 79 and 72% of the bovine and human genomes, respectively. We then integrated the bovine RH and comparative maps with BAC fingerprint information in to construct a detailed, BAC-based physical map covering a reported 40-cM quantitative trait locus region for intramuscular fat or "marbling" on BTA 4. In summary, the new, high-resolution SUNbRH7000-rad, comparative, Shirakawa-USDA linkage, and BAC fingerprint maps provide a set of genomic tools for fine mapping regions of interest in cattle.     

A human-horse comparative map based on equine BAC end sequences

In an effort to increase the density of sequence-based markers for the horse genome we generated 9473 BAC end sequences (BESs) from the CHORI-241 BAC library with an average read length of 677 bp. BLASTN searches with the BESs revealed 4036 meaningful hits (E 相似文献   

BAC contig from a 3-cM region of mouse chromosome 11 surrounding Brca1

Even with the completion of a draft version of the human genome sequence only a fraction of the genes identified from this sequence have known functions. Chromosomal engineering in mouse cells, in concert with gene replacement assays to prove the functional significance of a given genomic region or gene, represents a rapid and productive means for understanding the role of a given set of genes. Both techniques rely heavily on detailed maps of chromosomal regions, initially to understand the scope of the regions being modified and finally to provide the cloned resources necessary to allow both finished sequencing and large insert complementation. This report describes the creation of a BAC clone contig on mouse chromosome 11 in a region showing conservation of synteny with sequences on human chromosome 17. We have created a detailed map of an approximately 3-cM region containing at least 33 genes through the use of multiple BAC mapping strategies, including chromosome walking and multiplex oligonucleotide hybridization and gap filling. The region described is one of the targets of a large effort to create a series of mice with regional deletions on mouse chromosome 11 (33-80 cM) that can subsequently be subjected to further mutagenesis.     

A physical map of the highly heterozygous Populus genome: integration with the genome sequence and genetic map and analysis of haplotype variation

As part of a larger project to sequence the Populus genome and generate genomic resources for this emerging model tree, we constructed a physical map of the Populus genome, representing one of the few such maps of an undomesticated, highly heterozygous plant species. The physical map, consisting of 2802 contigs, was constructed from fingerprinted bacterial artificial chromosome (BAC) clones. The map represents approximately 9.4-fold coverage of the Populus genome, which has been estimated from the genome sequence assembly to be 485 ± 10 Mb in size. BAC ends were sequenced to assist long-range assembly of whole-genome shotgun sequence scaffolds and to anchor the physical map to the genome sequence. Simple sequence repeat-based markers were derived from the end sequences and used to initiate integration of the BAC and genetic maps. A total of 2411 physical map contigs, representing 97% of all clones assigned to contigs, were aligned to the sequence assembly (JGI Populus trichocarpa , version 1.0). These alignments represent a total coverage of 384 Mb (79%) of the entire poplar sequence assembly and 295 Mb (96%) of linkage group sequence assemblies. A striking result of the physical map contig alignments to the sequence assembly was the co-localization of multiple contigs across numerous regions of the 19 linkage groups. Targeted sequencing of BAC clones and genetic analysis in a small number of representative regions showed that these co-aligning contigs represent distinct haplotypes in the heterozygous individual sequenced, and revealed the nature of these haplotype sequence differences.