Optimization of extracellular psychrophilic alkaline lipase produced by marine Pseudomonas sp. (MSI057)

An endosymbiotic Pseudomonas sp. (MSI057), which could produce high yields of lipase, was isolated from marine sponge Dendrilla nigra, collected from the peninsular coast of India. Maximum production of enzyme was obtained in minimal medium supplemented with 1% tributyrin. Catabolite repression was observed when the medium was supplemented with readily available carbon sources. The optimum temperature and pH for the enzyme production was 30 degrees C and 9.0, respectively. The enzyme exhibited maximum activity in pH range of 8-9 with an optimum pH 9.0. The activity of purified enzyme was optimum at 37 degrees C and showed 80% activity at 20 degrees C and the enzyme activity decreased dramatically above 50 degrees C. Based on the present findings, the enzyme was characterized as psychrophilic alkaline lipase, which can be developed for industrial applications.     

Characterization of lipases from Staphylococcus aureus and Staphylococcus epidermidis isolated from human facial sebaceous skin

Two staphylococcal lipases were obtained from Staphylococcus epidermidis S2 and Staphylococcus aureus S11 isolated from sebaceous areas on the skin of the human face. The molecular mass of both enzymes was estimated to be 45 kDa by SDS-PAGE. S2 lipase displayed its highest activity in the hydrolysis of olive oil at 32 degrees C and pH 8, whereas S11 lipase showed optimal activity at 31 degrees C and pH 8.5. The S2 lipase showed the property of cold-adaptation, with activation energy of 6.52 kcal/mol. In contrast, S11 lipase's activation energy, at 21 kcal/mol, was more characteristic of mesophilic lipases. S2 lipase was stable up to 45° C and within the pH range from 5 to 9, whereas S11 lipase was stable up to 50 degrees C and from pH 6 to 10. Both enzymes had high activity against tributyrin, waste soybean oil, and fish oil. Sequence analysis of the S2 lipase gene showed an open reading frame of 2,067 bp encoding a signal peptide (35 aa), a pro-peptide (267 aa), and a mature enzyme (386 aa); the S11 lipase gene, at 2,076 bp, also encoded a signal peptide (37 aa), pro-peptide (255 aa), and mature enzyme (399 aa). The two enzymes maintained amino acid sequence identity of 98-99% with other similar staphylococcal lipases. Their microbial origins and biochemical properties may make these staphylococcal lipases isolated from facial sebaceous skin suitable for use as catalysts in the cosmetic, medicinal, food, or detergent industries.     

Purification, crystallization and properties of triacylglycerol lipase from Pseudomonas fluorescens.

Triacylglycerol lipase of Pseudomonas fluorescens was purified from the crude enzyme by ammonium sulfate precipitation and chromatographies on Sephadex G-75 and DEAE-cellulose. The crystallization of the lipase was successfully carried out. The purified lipase was demonstrated to be homogenous on disc electrophoresis and its molecular weight was calculated to be 32 000 by gel filtration. The optimum pH for hydrolysis of sesame oil was 7.0. The enzyme was stable up to 40 degrees C under the condition of pH 7.0 for 30 min and had more than 80% of the remaining activity between pH 5.0--11.0 at 37 degrees C for 60 min. The lipase was strongly inhibited by iodine and partially inhibited by FeCl3 and N-bromosuccinimide, and showed the most activity on tricaproyglycerol, among the triacylglycerols used.     

Thermostable lipase of Bacillus Stearothermophilus: high-level production, purification, and calcium-dependent thermostability

An efficient expression system was developed for the production of the thermostable lipase from Bacillus stearothermophilus L1 in an Escherichia coli system. A structural gene corresponding to mature lipase was subcloned in the pET-22b(+) expression vector and its expression was induced by IPTG at 30 degrees C in E. coli cells. The lipase activity in a cell-free extract was as high as 448,000 units/g protein, which corresponds to as much as 26% of the total cellular protein and is 77 times higher than that of E. coli RR1/pLIP1. Based on its pI (7.4) and pH stability data reported previously, the L1 lipase was efficiently purified to homogeneity with CM (at pH 6.0) and DEAE (at pH 8.8) column chromatographies with a recovery yield of 62%. The specific activity of the purified enzyme was 1700 units/mg protein when olive oil emulsion was used as a substrate. Its optimum temperature for the hydrolysis of olive oil was 68 degrees C and it was stable up to 55 degrees C for 30 min-incubation. The thermostability increased by about 8-10 degrees in the presence of calcium ions. This calcium-dependent thermostability was confirmed by the tryptophan fluorescence emission kinetics showing that the enzyme starts to unfold at 66 degrees C in the presence of calcium ions but at 58 degrees C in the absence of calcium ions, implying that the calcium ions bind to the thermostable enzyme and stabilize the protein tertiary structure even at such high temperatures.     

Studies on the enhanced production of extracellular lipase by Staphylococcus epidermidis

Staphylococcus epidermidis isolated from spoiled frozen marine fish samples exhibited optimum lipase activity of 8.1 U within 72 h in batch fermentation. Inducible effect of different sugars, nitrogen sources, salts and metal ions were studied on enzyme production. Trybutyrin induced the enzyme production by twofold. Addition of lactose in the production medium further improved lipase production. Sodium chloride increased lipase production whereas the presence of metals in the media had an inhibitory effect. Cells of immobilized S. epidermidis in agar beads (3%) increased lipase production compared with free cells. The optimum temperature and pH for enzyme activity was 20 degrees C and 7.0 respectively. Lipase retained its 85% stability at pH 6.0 and at 40 degrees C. Immobilized cells with high lipolytic activity and stability may provide commercial advantages over conventional methods of lipase production.     

Triacylglycerol lipase in bovine erythrocytes

Acid lipase activity was found in the bovine erythrocyte ghosts, but little neutral or alkaline lipase activity was observed in the erythrocytes. The membrane-bound lipase showed a remarkable activity in the ghosts only after hemolysis. The membrane-bound lipase showed its maximum activity at pH 4.5, 38 degrees C, and it was stable below 40 degrees C. The hydrolysis rate was linear with time up to 60 min, and was proportional to the amount of enzyme up to 0.4 mg protein. The bound lipase was activated markedly by bovine serum albumin and slightly by octyl-glycoside. The lipase was remarkably inhibited by bovine serum.     

Purification of a moderate thermotolerant Bacillus coagulans BTS1 lipase and its properties in a hydro-gel system

An alkaline thermotolerant lipase of Bacillus coagulans BTS1 was successively purified by ammonium sulfate precipitation and DEAE anion exchange chromatography. The purified lipase immobilized in alginate beads showed an optimal activity at pH 7.5 and 55 degrees C. A pH of 5.0 or 10.0 completely quenched the activity of immobilized lipase. The alginate-bound lipase retained its activity following exposure to most of the organic solvents including amines, alkanes and alcohols. Chloride salt of Al3+, Co2+, Mg2+ and NH4+ modulated the lipase activity of alginate-immobilized enzyme. The alginate entrapped lipase showed a preferentially high activity towards p-nitrophenyl palmitate (C: 16) and activity of matrix increased following exposure to SDS. Moreover, the immobilized lipase retained more than 50% of its activity after 3rd cycle of reuse.     

Sunflower seed lipase: extraction, purification, and characterization

A simple procedure for the extraction of the lipolytic activity from sunflower seed has been developed. Various conditions of extraction have been optimized in order to obtain maximum yield of lipase. A new lipase enzyme was purified by the fractional salt precipitation from the supernatant, dialysis on a cellulose membrane, and gel column chromatography on Sephadex G-75. The lipase was monomeric, with an apparent Mr of 22 kDa and a pI of 8, with the electrophoretic analysis. Kinetics of the enzyme activity versus substrate concentration showed typical lipase behavior, with Km and Vmax, values of 1.33 mM and 555 U/mg. All triglycerides were efficiently hydrolyzed by the enzyme, but this showed a preference towards triglycerides of natural mono unsaturated fatty acids. The optimum temperature, pH, and incubation time for lipolytic activity were 50 degrees C, 7.5, and 5 min, respectively. The stability of the sunflower lipase was investigated under operational and storage conditions. It was found that this enzyme preserved its lipolytic activity at temperatures between at 35-50 degrees C, alkaline pH, and for a period of about four months.     

Some properties of acid lipase in the defatted liver from the laying hen (Gallus domesticus)

Acid lipase activity was found in the defatted liver from the laying hen, but little neutral or alkaline lipase activity was observed in the liver. Most of acid lipase was in the insoluble fraction of the defatted liver, and the enzyme was solubilized by sonication at 9 kHz for 50 min in a slightly alkaline solution. The lipase showed its maximum activity at pH 5.0, 38 degrees C. It was stable below 40 degrees C and over the pH range from 4.0 to 9.0. Detergents, serum of the laying hen and the soluble fraction from the defatted liver homogenate from the laying hen markedly inhibited the lipase activity. The lipase solubilized by sonication was large in molecular mass, suggesting that the preparation formed colloidal particles.     

Enhanced thermostability of silica-immobilized lipase from Bacillus coagulans BTS-3 and synthesis of ethyl propionate

A lipase from the thermophilic isolate Bacillus coagulans BTS-3 was produced and purified. The enzyme was purified 40-fold to homogeneity by ammonium sulfate precipitation and DEAE-Sepharose column chromatography. Its molecular weight was 31 kDa on SDS-PAGE. The purified lipase was immobilized on silica and its binding efficiency was found to be 60%. The enzyme took 60 min to bind maximally onto the support. The pH and temperature optima of immobilized lipase were same as those of the free enzyme, i.e. 8.5 and 55 degrees C, respectively. The immobilized enzyme had shown marked thermostability on the elevated temperatures of 55, 60, 65 and 70 degrees C. The immobilized enzyme was reused for eigth cycles as it retained almost 80% of its activity. The catalytic activity of immobilized enzyme was enhanced in n-hexane and ethanol. The immobilized enzyme when used for esterification of ethanol and propionic acid showed 96% conversion in n-hexane in 12 h at 55 degrees C.     

New thermophilic and thermostable esterase with sequence similarity to the hormone-sensitive lipase family, cloned from a metagenomic library

A gene coding for a thermostable esterase was isolated by functional screening of Escherichia coli cells that had been transformed with fosmid environmental DNA libraries constructed with metagenomes from thermal environmental samples. The gene conferring esterase activity on E. coli grown on tributyrin agar was composed of 936 bp, corresponding to 311 amino acid residues with a molecular mass of 34 kDa. The enzyme showed significant amino acid similarity (64%) to the enzyme from a hyperthermophilic archaeon, Pyrobaculum calidifontis. An amino acid sequence comparison with other esterases and lipases revealed that the enzyme should be classified as a new member of the hormone-sensitive lipase family. The recombinant esterase that was overexpressed and purified from E. coli was active above 30 degrees C up to 95 degrees C and had a high thermal stability. It displayed a high degree of activity in a pH range of 5.5 to 7.5, with an optimal pH of approximately 6.0. The best substrate for the enzyme among the p-nitrophenyl esters (C(4) to C(16)) examined was p-nitrophenyl caproate (C(6)), and no lipolytic activity was observed with esters containing an acyl chain length of longer than 10 carbon atoms, indicating that the enzyme is an esterase and not a lipase.     

Production, purification, and characterization of lipase from thermophilic and alkaliphilic Bacillus coagulans BTS-3

A thermophilic isolate Bacillus coagulans BTS-3 produced an extracellular alkaline lipase, the production of which was substantially enhanced when the type of carbon source, nitrogen source, and the initial pH of culture medium were consecutively optimized. Lipase activity 1.16 U/ml of culture medium was obtained in 48 h at 55 degrees C and pH 8.5 with refined mustard oil as carbon source and a combination of peptone and yeast extract (1:1) as nitrogen sources. The enzyme was purified 40-fold to homogeneity by ammonium sulfate precipitation and DEAE-Sepharose column chromatography. Its molecular weight was 31 kDa on SDS-PAGE. The enzyme showed maximum activity at 55 degrees C and pH 8.5, and was stable between pH 8.0 and 10.5 and at temperatures up to 70 degrees C. The enzyme was found to be inhibited by Al3+, Co2+, Mn2+, and Zn2+ ions while K+, Fe3+, Hg2+, and Mg2+ ions enhanced the enzyme activity; Na+ ions have no effect on enzyme activity. The purified lipase showed a variable specificity/hydrolytic activity towards various 4-nitrophenyl esters.     

Staphylococcus warneri BW 94--a new source of lipase

Staphylococcus isolated from a common Indian sweet viz. basundi was tested for its ability to produce lipase. The colorless zone of hydrolysis around the colony grown on Baird Parker agar containing egg yolk produced extracellular lipase. Colony morphology, coagulase production, haemolysis, acid production in carbohydrate medium and enzyme activity studies showed that the organism was Staphylococcus warneri. Growth of S. warneri was obtained after 11 hr at 37 degrees C, pH 7.5, while the maximum production of lipase was obtained at 30 degrees C at pH 6.5 after 9 hr of incubation. Agitation did not increase lipase production. A sudden fall in the activity of lipase was noted after 11 hr. Addition of sucrose which is a growth stimulant for Staphylococcus, did not stimulate production of lipase by these organisms. Also, addition of oleic acid, Tween 80 or ethanol did not stimulate formation of lipase.     

Properties of an immobilized lipase of Bacillus coagulans BTS-1

Lipase (EC 3.1.1.3) is a tri-acylglycerol ester hydrolase, catalysing the hydrolysis of tri-, di-, and mono-acylglycerols to glycerol and fatty acids. To study the effect of adsorption of a lipase obtained from Bacillus coagulans BTS-1, its lipase was immobilized on native and activated (alkylated) matrices, i.e. silica and celite. The effect of pH, temperature, detergents, substrates, alcohols, organic solvent etc. on the stability of the immobilized enzyme was evaluated. The gluteraldahyde or formaldehyde (at 1% and 2% concentration, v/v) activated matrix was exposed to the Tris buffered lipase. The enzyme was adsorbed/entrapped more rapidly on to the activated silica than on the activated celite. The immobilized lipase showed optimal activity at 50 degrees C following one-hour incubation. The lipase was specifically more hydrolytic to the medium C-length ester (p-nitro phenyl caprylate than p-nitro phenyl laurate). The immobilization/entrapment enhanced the stability of the lipase at a relatively higher temperature (50 degrees C) and also promoted enzyme activity at an acidic pH (pH 5.5). Moreover, the immobilized lipase was quite resistant to the denaturing effect of SDS.     

Purification and characterization of an extracellular lipase from a thermophilic Rhizopus oryzae strain isolated from palm fruit

We have isolated a lipolytic strain from palm fruit that was identified as a Rhizopus oryzae. Culture conditions were optimized and highest lipase production amounting to 120 U/ml was achieved after 4 days of cultivation. The extracellular lipase was purified 1200-fold by ammonium sulfate precipitation, sulphopropyl-Sepharose chromatography, Sephadex G 75 gel filtration and a second sulphopropyl-Sepharose chromatography. The specific activity of the purified enzyme was 8800 U/mg. The lipolytic enzyme has a molecular mass of 32 kDa by SDS-polyacrylamide gel electrophoresis and gel filtration. The enzyme exhibited a single band in active polyacrylamide gel electrophoresis and its isoelectric point was 7.6. Analysis of Rhizopus oryzae lipase by RP-HPLC confirmed the homogeneity of the enzyme preparation. Determination of the N-terminal sequence over 19 amino acid residues showed a high homology with lipases of the same genus. The optimum pH for enzyme activity was 7.5. Lipase was stable in the pH range from 4.5 to 7.5. The optimum temperature for lipase activity was 35 degrees C and about 65% of its activity was retained after incubation at 45 degrees C for 30 min. The lipolytic enzyme was inhibited by Triton X100, SDS, and metal ions such as Fe(3+), Cu(2+), Hg(2+) and Fe(2+). Lipase activity against triolein was enhanced by sodium cholate or taurocholate. The purified lipase had a preference for the hydrolysis of saturated fatty acid chains (C(8)-C(18)) and a 1, 3-position specificity. It showed a good stability in organic solvents and especially in long chain-fatty alcohol. The enzyme poorly hydrolyzed triacylglycerols containing n-3 polyunsaturated fatty acids, and appeared as a suitable biocatalyst for selective esterification of sardine free fatty acids with hexanol as substrate. About 76% of sardine free fatty acids were esterified after 30 h reaction whereas 90% of docosahexaenoic acid (DHA) was recovered in the unesterified fatty acids.     

Glutaraldehyde activation of polymer Nylon-6 for lipase immobilization: enzyme characteristics and stability

An extracellular alkaline lipase of a thermo tolerant Bacillus coagulans BTS-3 was immobilized onto glutaraldehyde activated Nylon-6 by covalent binding. Under optimum conditions, the immobilization yielded a protein loading of 228 microg/g of Nylon-6. Immobilized enzyme showed maximum activity at a temperature of 55 degrees C and pH 7.5. The enzyme was stable between pH 7.5-9.5. It retained 88% of its original activity at 55 degrees C for 2h and also retained 85% of its original activity after eight cycles of hydrolysis of p-NPP. Kinetic parameters Km and Vmax were found to be 4mM and 10 micromol/min/ml, respectively. The influence of organic solvents on the catalytic activity of immobilized enzyme was also evaluated. The bound lipase showed enhanced activity when exposed to n-heptane. The substrate specificity of immobilized enzyme revealed more efficient hydrolysis of higher carbon length (C-16) ester than other ones.     

Over-expression and properties of a purified recombinant Bacillus licheniformis lipase: a comparative report on Bacillus lipases

The gene coding for an extracellular lipase of Bacillus licheniformis was cloned using PCR techniques. The sequence corresponding to the mature lipase was subcloned into the pET 20b(+) expression vector to construct a recombinant lipase protein containing 6 histidine residues at the C-terminal. High-level expression of the lipase by Escherichia coli cells harbouring the lipase gene-containing expression vector was observed upon induction with IPTG at 30 degrees C. A one step purification of the recombinant lipase was achieved with Ni-NTA resin. The specific activity of the purified enzyme was 130 units/mg with p-nitrophenyl-palmitate as substrate. The enzyme showed maximum activity at pH 10-11.5 and was remarkably stable at alkaline pH values up to 12. The enzyme was active toward p-nitrophenyl esters of short to long chains fatty acids but with a marked preference for esters with C(6) and C(8) acyl groups. The amino acid sequence of the lipase shows striking similarities to lipases from Bacillus subtilis and Bacillus pumilus. Based on the amino acid identity and biochemical characteristics, we propose that Bacillus lipases be classified into two distinct subfamilies of their own.     

Characterization of thermostable lipase from thermophilic Geobacillus sp. TW1

A novel lipase-producing thermophilic strain TW1, assigned to Geobacillus sp. TW1 based on 16S rRNA sequence, was isolated from a hot spring in China. Based on this strain, a lipase gene encoding 417 amino acids was cloned. Subsequently, the lipase gene was expressed in Escherichia coli and purified as a fusion protein with glutathione S-transferase. The results showed that the recombinant lipase had an activity optimum at 40 degrees C and pH at 7.0-8.0. It was active up to 90 degrees C at pH 7.5, and stable over a wide pH ranging from 6.0 to 9.0. The recombinant lipase was stable in 1 mM enzyme inhibitors (EDTA, 2-ME, SDS, PMSF or DTT), as well as in 0.1% detergents (Tween 20, Chaps or Triton X-100). Its catalytic function was enhanced in the presence of Ca(2+), Mg(2+), Zn(2+), Fe(2+) or Fe(3+), but inhibited by Cu(2+), Mn(2+), and Li(+). By comparison with the crude lipase, the recombinant lipase had similar properties and was characteristic of thermostable enzymes. Our study presented a rapid overexpression and purification of the lipase gene from thermophile, aimed at improving the enzyme yield for industrial applications.     

Partial purification and characterization of almond seed lipase

A lipase was partially purified from the almond (Amygdalus communis L.) seed by ammonium sulfate fractionation and dialysis. Kinetics of the enzyme activity versus substrate concentration showed typical lipase behavior, with K(m) and V(max) values of 25 mM and 113.63 micromol min(-1) mg(-1) for tributyrin as substrate. All triglycerides were efficiently hydrolyzed by the enzyme. The partially purified almond seed lipase (ASL) was stable in the pH range of 6-9.5, with an optimum pH of 8.5. The enzyme was stable between 20 and 90 degrees C, beyond which it lost activity progressively, and exhibited an optimum temperature for the hydrolysis of soy bean oil at 65 degrees C. Based on the temperature activity data, the activation energy for the hydrolysis of soy bean oil was calculated as -5473.6 cal/mol. Soy bean oil served as good substrate for the enzyme and hydrolytic activity was enhanced by Ca(2+), Fe(2+), Mn(2+), Co(2+), and Ba(2+), but strongly inhibited by Mg(2+), Cu(2+), and Ni(2+). The detergents, sodiumdeoxicholate and Triton X-100 strongly stimulated enzyme activity while CTAB, DTAB, and SDS were inhibitors. Triton X-405 had no effect on lipase activity. The partially purified enzyme retained its activity for more than 6 months at -20 degrees C, beyond which it lost activity progressively.     

Biochemical and molecular characterization of Staphylococcus xylosus lipase

The Staphylococcus xylosus strain secretes a non-induced lipase in culture medium: S. xylosus lipase (SXL). Pure SXL is a monomeric protein (43 kDa). The 23 N-terminal amino acid residues were sequenced. This sequence is identical to that of Staphylococcus simulans lipase (SSL); in addition, it exhibits a high degree of homology with Staphylococcus aureus lipase (SAL NCTC 8530) sequences. The cloning and sequencing of gene part encoding the mature lipase shows one nucleotide difference with SSL, which corresponds to the change of one residue at a position 311. The lipase activity is maximal at pH 8.2 and 45 degrees C. SXL is able to hydrolyse triacylglycerols without chain length specificity. The specific activity of about 1900 U/mg was measured using tributyrin or triolein as substrate at pH 8.2 and at 45 degrees C in the presence of 2 mM CaCl2. In contrast to some previously characterized staphylococcal lipases, Ca2+ is not required to trigger the activity of SXL. SXL was found to be stable between pH 5 and pH 8.5. The enzyme maintains 50% of its activity after a 15-min incubation at 60 degrees C. Using tripropionin or vinyl esters as substrates, SXL does not present the interfacial activation phenomenon. Unlike many lipases, SXL is able to hydrolyse its substrate in the presence of bile salts or amphiphilic proteins. SXL is a serine enzyme, which is inhibited by THL.