Harvesting and Cryo-cooling Crystals of Membrane Proteins Grown in Lipidic Mesophases for Structure Determination by Macromolecular Crystallography

An important route to understanding how proteins function at a mechanistic level is to have the structure of the target protein available, ideally at atomic resolution. Presently, there is only one way to capture such information as applied to integral membrane proteins (Figure 1), and the complexes they form, and that method is macromolecular X-ray crystallography (MX). To do MX diffraction quality crystals are needed which, in the case of membrane proteins, do not form readily. A method for crystallizing membrane proteins that involves the use of lipidic mesophases, specifically the cubic and sponge phases^1-5, has gained considerable attention of late due to the successes it has had in the G protein-coupled receptor field^6-21 (www.mpdb.tcd.ie). However, the method, henceforth referred to as the in meso or lipidic cubic phase method, comes with its own technical challenges. These arise, in part, due to the generally viscous and sticky nature of the lipidic mesophase in which the crystals, which are often micro-crystals, grow. Manipulating crystals becomes difficult as a result and particularly so during harvesting^22,23. Problems arise too at the step that precedes harvesting which requires that the glass sandwich plates in which the crystals grow (Figure 2)^24,25 are opened to expose the mesophase bolus, and the crystals therein, for harvesting, cryo-cooling and eventual X-ray diffraction data collection.The cubic and sponge mesophase variants (Figure 3) from which crystals must be harvested have profoundly different rheologies^4,26. The cubic phase is viscous and sticky akin to a thick toothpaste. By contrast, the sponge phase is more fluid with a distinct tendency to flow. Accordingly, different approaches for opening crystallization wells containing crystals growing in the cubic and the sponge phase are called for as indeed different methods are required for harvesting crystals from the two mesophase types. Protocols for doing just that have been refined and implemented in the Membrane Structural and Functional Biology (MS&FB) Group, and are described in detail in this JoVE article (Figure 4). Examples are given of situations where crystals are successfully harvested and cryo-cooled. We also provide examples of cases where problems arise that lead to the irretrievable loss of crystals and describe how these problems can be avoided. In this article the Viewer is provided with step-by-step instructions for opening glass sandwich crystallization wells, for harvesting and for cryo-cooling crystals of membrane proteins growing in cubic and in sponge phases.     

Lipidic cubic phase crystal structure of the photosynthetic reaction centre from Rhodobacter sphaeroides at 2.35A resolution

Well-ordered crystals of the bacterial photosynthetic reaction centre from Rhodobacter sphaeroides were grown from a lipidic cubic phase. Here, we report the type I crystal packing that results from this crystallisation medium, for which 3D crystals grow as stacked 2D crystals, and the reaction centre X-ray structure is refined to 2.35A resolution. In this crystal form, the location of the membrane bilayer could be assigned with confidence. A cardiolipin-binding site is found at the protein-protein interface within the membrane-spanning region, shedding light on the formation of crystal contacts within the membrane. A chloride-binding site was identified in the membrane-spanning region, which suggests a putative site for interaction with the light-harvesting complex I, the cytochrome bc(1) complex or PufX. Comparisons with the X-ray structures of this reaction centre deriving from detergent-based crystals are drawn, indicating that a slight compression occurs in this lipid-rich environment.     

Detergents destabilize the cubic phase of monoolein: implications for membrane protein crystallization

The in meso method for membrane protein crystallization uses a lipidic cubic phase as the hosting medium. The cubic phase provides a lipid bilayer into which the protein presumably reconstitutes and from which protein crystals nucleate and grow. The solutions used to spontaneously form the protein-enriched cubic phase often contain significant amounts of detergents that were employed initially to purify and to solubilize the membrane protein. By virtue of their surface activity, detergents have the potential to impact on the phase properties of the in meso system and, by extension, the outcome of the crystallization process. The purpose of this study was to quantify the effects that a popular series of nonionic detergents, the n-alkyl-beta-D-glucopyranosides, have on the phase behavior of hydrated monoolein, the lipid upon which the in meso method is based. Phase identity and phase microstructure were characterized by small-angle x-ray diffraction on samples prepared to mimic in meso crystallization conditions. Measurements were made in the 0-40 degrees C range. Samples prepared in the cooling direction allow for the expression of metastability, a feature of liquid crystalline phases that might be exploited in low-temperature crystallization. The results show that the cubic phase is relatively insensitive to small amounts of alkyl glucosides. However, at higher levels the detergents trigger a transition to the lamellar phase in a temperature- and salt concentration-dependent manner. These effects have important implications for in meso crystallization. A diffraction-based method for assaying detergents is presented.     

Monoolein lipid phases as incorporation and enrichment materials for membrane protein crystallization

The crystallization of membrane proteins in amphiphile-rich materials such as lipidic cubic phases is an established methodology in many structural biology laboratories. The standard procedure employed with this methodology requires the generation of a highly viscous lipidic material by mixing lipid, for instance monoolein, with a solution of the detergent solubilized membrane protein. This preparation is often carried out with specialized mixing tools that allow handling of the highly viscous materials while minimizing dead volume to save precious membrane protein sample. The processes that occur during the initial mixing of the lipid with the membrane protein are not well understood. Here we show that the formation of the lipidic phases and the incorporation of the membrane protein into such materials can be separated experimentally. Specifically, we have investigated the effect of different initial monoolein-based lipid phase states on the crystallization behavior of the colored photosynthetic reaction center from Rhodobacter sphaeroides. We find that the detergent solubilized photosynthetic reaction center spontaneously inserts into and concentrates in the lipid matrix without any mixing, and that the initial lipid material phase state is irrelevant for productive crystallization. A substantial in-situ enrichment of the membrane protein to concentration levels that are otherwise unobtainable occurs in a thin layer on the surface of the lipidic material. These results have important practical applications and hence we suggest a simplified protocol for membrane protein crystallization within amphiphile rich materials, eliminating any specialized mixing tools to prepare crystallization experiments within lipidic cubic phases. Furthermore, by virtue of sampling a membrane protein concentration gradient within a single crystallization experiment, this crystallization technique is more robust and increases the efficiency of identifying productive crystallization parameters. Finally, we provide a model that explains the incorporation of the membrane protein from solution into the lipid phase via a portal lamellar phase.     

‘Hit and run’ serial femtosecond crystallography of a membrane kinase in the lipid cubic phase

The lipid-based bicontinuous cubic mesophase is a nanoporous membrane mimetic with applications in areas that include medicine, personal care products, foods and the basic sciences. An application of particular note concerns it use as a medium in which to grow crystals of membrane proteins for structure determination by X-ray crystallography. At least two variations of the mesophase exist. One is the highly viscous cubic phase, which has well developed long-range order. The other so-called sponge phase is considerably more fluid and lacks long-range order. The sponge phase has recently been shown to be a convenient vehicle for delivering microcrystals of membrane proteins to an X-ray free-electron laser beam for serial femtosecond crystallography (SFX). Unfortunately, the sponge phase approach calls for large amounts of protein that are not always available in the case of membrane proteins. The cubic phase offers the advantage of requiring significantly less protein for SFX but comes with its own challenges. Here, we describe the physico-chemical bases for these challenges, solutions to them and prospects for future uses of lipidic mesophases in the SFX arena.     

The effect of increasing concentrations of precipitating salts used to crystallize proteins on the structure of the lipidic Q224 cubic phase

A major obstacle to elucidating the structure of membrane proteins at high resolution is the difficulty of preparing these proteins as well as to grow well-ordered crystals. During the last few years several groups have considered the use of three-dimensional bicontinuous lipidic cubic phases as a possible crystallization matrix for such molecules. In a few cases these studies have been successfully approached by other laboratories, however, a number of questions remain, particularly in regard to the effects of solutes on the phase diagrams of lipid-water systems. In the present work we report the structural behavior of the lipidic Q224 (Pn3m), Q230 (Ia3d) and HII phases systematically studied in the presence of a range of concentrations of various salts and precipitating agents at various pH values. Some of the results reported here have been presented elsewhere Vargas et al. (2000) [Strategies in membrane protein crystallization. Chemical Prospectives in Crystallography of Molecular Biology. International School of Crystallography, NATO-ASI course, Erice (Italy)].     

Gramicidin structure and disposition in highly curved membranes

With a view to deciphering aspects of the mechanism of membrane protein crystallization in lipidic mesophases (in meso crystallization), an examination of the structure and disposition of the pore-forming peptide, gramicidin, in the lipidic cubic phase was undertaken. At its simplest, the cubic phase consists of lipid and water in the form of a molecular 'sponge.' The lipid exists as a continuous, highly curved bilayer that divides the aqueous component into two interpenetrating but non-contacting channels. In this study, we show that gramicidin reconstitutes into the lipid bilayer of the cubic phase and that it adopts the channel, or helical dimer, conformation therein. Fluorescence quenching with brominated lipid was used to establish the bilayer location of the peptide. Electronic absorption and emission spectroscopies corroborated this finding. Peptide conformation in the cubic phase membrane was determined by circular dichroism. The identity and microstructure of the mesophases, and their capacity to accommodate gramicidin and other system components (sodium dodecyl sulfate, trifluoroethanol), was established by small-angle X-ray diffraction. Beyond a limiting concentration, gramicidin destabilized the cubic phase in favor of the inverted hexagonal phase. While gramicidin remained bilayer bound as membrane thickness changed, its conformation responded to the degree of bilayer mismatch with the hydrophobic surface of the peptide. These findings support the hypothesis that reconstitution into the lipid bilayer is an integral part of the in meso crystallization process as applied to membrane proteins. They also suggest ways for improving the process of membrane protein crystallogenesis.     

Native chemical ligation of hydrophobic [corrected] peptides in lipid bilayer systems

The covalent modification of water-insoluble membrane polypeptides incorporated into lipid bilayers by native chemical ligation is described. The key feature of this strategy is the use of cubic lipidic phase (CLP) matrixes as reaction media. The CLP-matrix consists of a lipid bilayer into which hydrophobic polypeptides and folded membrane proteins can be inserted and two unbounded aqueous channels that give the aqueous phase access to both sides of an infinite lipid bilayer and thus ensure that modification of solvent-exposed sites is independent of the topology of membrane incorporation. The enzymatic removal of an N-terminal proteolytic cleavage sequence from the membrane polypeptide exposes an N-terminal cysteine residue. Subsequently, a C-terminal thioester peptide is joined to the N-terminus of the polypeptide by a native chemical ligation reaction. By use of this approach, incorporation of a variety of molecular tools, such as spectroscopic probes, unnatural amino acids, and molecular markers into membrane proteins that cannot be easily solubilized in detergent or denaturant solutions, may be achieved.     

Lipidic cubic phases as matrices for membrane protein crystallization

This review provides detailed procedures for the crystallization of membrane proteins via the lipidic cubic phase method. Bacteriorhodopsin-specific, hands-on protocols are given for (i) the preparation of bacteriohordopsin from purple membrane by monomerization in octylglucoside and gel filtration chromatography or by selective extraction after pre-treatment with dodecyl-trimethylammonium bromide, (ii) the incorporation of bacteriorhodopsin into lipidic cubic phases by mixing in vials or within coupled syringes and, (iii) the crystallization of bacteriorhodopsin in the lipidic matrix by adding a solid salt or an overlaying with a solution. References for further useful procedures and materials are listed in order to provide biochemists and crystallographers with all information that is necessary to grow crystals of the membrane protein bacteriorhodopsin.     

Receptor-dependent G-protein activation in lipidic cubic phase

The primary step in cellular signaling by G-protein-coupled receptors (GPCRs) is the interaction of the agonist-activated transmembrane receptor with an intracellular G-protein. Understanding the underlying molecular mechanisms requires the structural determination of receptor G-protein complexes that are not yet achieved. The crystal structure of the bovine photoreceptor rhodopsin, a prototypical GPCR, was solved recently and the structures of different states of engineered G-proteins were reported. Posttranslational hydrophobic modifications of G-proteins are in most cases removed for crystallization but play functional roles for interactions among G-protein subunits with receptors, as well as membranes. Bovine rhodopsin is reconstituted into lipidic cubic phases to assess their potential for crystallization of receptor G-protein complexes under conditions that may preserve the structural and functional roles of hydrophobic protein modifications. Three-dimensional bilayers of a bicontinuous lipidic cubic phase are successfully employed for crystallization of membrane and soluble proteins. UV-visible absorption and attenuated total reflection Fourier transform IR difference spectroscopy reveal that light activation of cubic phase reconstituted rhodopsin results in the generation of a metarhodopsin II-like state. Via diffusion along aqueous channels, transducin couples efficiently to this photoproduct as evidenced by the nucleotide-dependent increase of transducin fluorescence. Thus, rhodopsin transducin interactions do not crucially depend on the presence of sn1 and sn2 acyl chains, phospholipid head groups, or membrane planarity. Because lipidic cubic phases preserve the essential functional and structural properties of native rhodopsin and transducin, they appear suitable for the detergent-free crystallization of receptor G-protein complexes carrying a normal pattern of hydrophobic modifications.     

Use of a Robot for High-throughput Crystallization of Membrane Proteins in Lipidic Mesophases

Structure-function studies of membrane proteins greatly benefit from having available high-resolution 3-D structures of the type provided through macromolecular X-ray crystallography (MX). An essential ingredient of MX is a steady supply of ideally diffraction-quality crystals. The in meso or lipidic cubic phase (LCP) method for crystallizing membrane proteins is one of several methods available for crystallizing membrane proteins. It makes use of a bicontinuous mesophase in which to grow crystals. As a method, it has had some spectacular successes of late and has attracted much attention with many research groups now interested in using it. One of the challenges associated with the method is that the hosting mesophase is extremely viscous and sticky, reminiscent of a thick toothpaste. Thus, dispensing it manually in a reproducible manner in small volumes into crystallization wells requires skill, patience and a steady hand. A protocol for doing just that was developed in the Membrane Structural & Functional Biology (MS&FB) Group^1-3. JoVE video articles describing the method are available^1,4. The manual approach for setting up in meso trials has distinct advantages with specialty applications, such as crystal optimization and derivatization. It does however suffer from being a low throughput method. Here, we demonstrate a protocol for performing in meso crystallization trials robotically. A robot offers the advantages of speed, accuracy, precision, miniaturization and being able to work continuously for extended periods under what could be regarded as hostile conditions such as in the dark, in a reducing atmosphere or at low or high temperatures. An in meso robot, when used properly, can greatly improve the productivity of membrane protein structure and function research by facilitating crystallization which is one of the slow steps in the overall structure determination pipeline. In this video article, we demonstrate the use of three commercially available robots that can dispense the viscous and sticky mesophase integral to in meso crystallogenesis. The first robot was developed in the MS&FB Group^5,6. The other two have recently become available and are included here for completeness. An overview of the protocol covered in this article is presented in Figure 1. All manipulations were performed at room temperature (~20 °C) under ambient conditions.     

Detergent-free membrane protein crystallization.

A comprehensive understanding of structure-function relationships of proteins requires their structures to be elucidated to high resolution. With most membrane proteins this has not been accomplished so far, mainly because of their notoriously poor crystallizability. Here we present a completely detergent-free procedure for the incorporation of a native purple membrane into a monoolein-based lipidic cubic phase, and subsequent crystallization of three-dimensional bacteriorhodopsin crystals therein. These crystals exhibit comparable X-ray diffraction quality and mosaicity, and identical crystal habit and space group to those of bacteriorhodopsin crystals that are grown from detergent-solubilized protein in cubic phase.     

The Photosynthetic Reaction Centre from the Purple Bacterium Rhodopseudomonas viridis

We first describe the history and methods of membrane protein crystallization, and show how the structure of the photosynthetic reaction centre from the purple bacterium Rhodopseudomonas viridis was solved. The structure of this membrane protein complex is correlated with its function as a light-driven electron pump across the photosynthetic membrane. Finally we draw conclusions on the structure of the photosystem II reaction centre from plants and discuss the aspects of membrane protein structure.Published in Les Prix Nobel–The Nobel Prizes 1988 (Nobel Foundation, Stockholm, 1989) and republished here with the permission of the Nobel Foundation the copyright holders.     

The photosynthetic reaction centre from the purple bacteriumRhodopseudomonas viridis

We first describe the history and methods of membrane protein crystallization, and show how the structure of the photosynthetic reaction centre from the purple bacteriumRhodopseudomonas viridis was solved. The structure of this membrane protein complex is correlated with its function as a light-driven electron pump across the photosynthetic membrane. Finally we draw conclusions on the structure of the photosystem II reaction centre from plants and discuss the aspects of membrane protein structure.Published inLes Prix Nobel—The Nobel Prizes 1988 (Nobel Foundation, Stockholm, 1989) and republished here with the permission of the Nobel Foundation the copyright holders.     

Membrane protein crystallization in lipidic mesophases: detergent effects

The "cubic phase method" for growing crystals of membrane proteins uses a complex mixture of water, lipid, protein, and other components. The current view is that the cubic phase is integral to the process. Thus additives from whatever source introduce the possibility of destabilizing the phase, thereby compromising the crystallization process. Detergents are used to solubilize membrane proteins and are likely to be ported into the cubic medium with the target protein. Depending on the identity and concentration of the detergent, the cubic phase, which itself is membranous, may be solubilized or destabilized in such a way as to render it unsuitable as a crystal growing system. The nonionic detergent n-dodecyl-beta-D-maltopyranoside is commonly used in membrane protein work. In this study, we evaluate its effect on the cubic mesophase of hydrated monoolein. X-ray diffraction was used for phase identification and mesophase microstructure characterization. The results show that while low levels of the detergent are tolerated, increasing concentrations trigger a cubic-to-lamellar phase transition in a temperature-dependent manner. This finding is rationalized in the context of complementary molecular shapes of the lipid and the detergent and has implications for the mechanism of crystallization in lipidic mesophases as discussed.     

Crystallizing Membrane Proteins for Structure Determination using Lipidic Mesophases

A detailed protocol for crystallizing membrane proteins by using lipidic mesophases is described. This method has variously been referred to as the lipidic cubic phase or in meso method. The method has been shown to be quite versatile in that it has been used to solve X-ray crystallographic structures of prokaryotic and eukaryotic proteins, proteins that are monomeric, homo- and hetero-multimeric, chromophore-containing and chromophore-free, and alpha-helical and beta-barrel proteins. Recent successes using in meso crystallization are the human engineered beta2-adrenergic and adenosine A2a G protein-coupled receptors. Protocols are presented for reconstituting the membrane protein into the monoolein-based mesophase, and for setting up crystallizations in the manual mode. Additional steps in the overall process, such as crystal harvesting, are to be addressed in future video articles. The time required to prepare the protein-loaded mesophase and to set up a crystallization plate manually is about one hour.     

Molecular mechanism for the crystallization of bacteriorhodopsin in lipidic cubic phases

Crystals of transmembrane proteins may be grown from detergent solutions or in a matrix of membranous lipid bilayers existing in a liquid crystalline state and forming a cubic phase (in cubo). While crystallization in micellar solutions appears analogous to that for soluble proteins, crystallization in lipidic matrices is poorly understood. As this method was shown to be applicable to several membrane proteins, understanding its mechanism will facilitate a rational design of crystallization, minimizing the laborious screening of a large number of parameters. Using polarization microscopy and low-angle X-ray diffraction, experimental evidence is provided to support a mechanistic model for the in cubo crystallization of bacteriorhodopsin in a lipid matrix. Membrane proteins are thought to reside in curved lipid bilayers, to diffuse into patches of lower curvature and to incorporate into lattices which associate to form highly ordered three-dimensional crystals. Critical testing of this model is necessary to generalize it to other membrane proteins.     

Crystallizing membrane proteins using lipidic bicelles

Crystallization of membrane proteins remains a significant challenge. For proteins resistant to the traditional approach of directly crystallizing from detergents, lipidic phase crystallization can be a powerful tool. Bicelles are an excellent medium for crystallizing membrane proteins in a lipidic environment. They can be described as bilayer discs formed by the mixture of a long-chain phospholipid and an amphiphile in an aqueous medium. Membrane proteins can be readily reconstituted into bicelles, where they are maintained in a native-like bilayer environment. Importantly, membrane proteins have been shown to be fully functional in bicelles under physiological conditions. Protein-bicelle mixtures can be manipulated with almost the same ease as detergent-solubilized membrane proteins, making bicelles compatible with standard equipment including high-throughput crystallization robots. A number of membrane proteins have now been successfully crystallized using the bicelle method, including bacteriorhodopsin, β2 adrenergic receptor, voltage-dependent anion channel, xanthorhodopsin and rhomboid protease. Because of the success with a variety of membrane proteins and the ease of implementation, bicelles should be a part of every membrane protein crystallographer's arsenal.     

Crystallization of transmembrane proteins in cubo: mechanisms of crystal growth and defect formation

Crystallization of membrane proteins is a major stumbling block en route to elucidating their structure and understanding their function. The novel concept of membrane protein crystallization from lipidic cubic phases, "in cubo", has yielded well-ordered crystals and high-resolution structures of several membrane proteins, yet progress has been slow due to the lack of understanding of the molecular mechanisms of protein transport, crystal nucleation, growth, and defect formation in cubo. Here, we examine at molecular and mesoscopic resolution with atomic force microscopy the morphology of in cubo grown bacteriorhodopsin crystals in inert buffers and during etching by detergent. The results reveal that crystal nucleation occurs following local rearrangement of the highly curved lipidic cubic phase into a lamellar structure, which is akin to that of the native membrane. Crystals grow within the bulk cubic phase surrounded by such lamellar structures, whereby transport towards a growing crystalline layer is constrained to within an individual lamella. This mechanism leads to lack of dislocations, generation of new crystalline layers at numerous locations, and to voids and block boundaries. The characteristic macroscopic lengthscale of these defects suggests that the crystals grow by attachment of single molecules to the nuclei. These insights into the mechanisms of nucleation, growth and transport in cubo provide guidance en route to a rational design of membrane protein crystallization, and promise to further advance the field.     

Protein Interactions and Membrane Geometry

The difficulty in growing crystals for x-ray diffraction analysis has hindered the determination of membrane protein structures. However, this is changing with the advent of a new method for growing high quality membrane protein crystals from the lipidic cubic phase. Although successful, the mechanism underlying this method has remained unclear. Here, we present a theoretical analysis of the process. We show that it is energetically favorable for proteins embedded in the highly curved cubic phase to cluster together in flattened regions of the membrane. This stabilizes the lamellar phase, permitting its outgrowth from the cubic phase. A kinetic barrier-crossing model is developed to determine the free energy barrier to crystallization from the time-dependent growth of protein clusters. Determining the values of key parameters provides both a rational basis for optimizing the experimental procedure for membrane proteins that have not yet been crystallized and insight into the analogous cubic to lamellar transitions in cells. We also discuss the implications of this mechanism for protein sorting at the exit sites of the Golgi and endoplasmic reticulum and the general stabilization of membrane structures.