High resolution crystal structures of HIV-1 protease with a potent non-peptide inhibitor (UIC-94017) active against multi-drug-resistant clinical strains

The compound UIC-94017 (TMC-114) is a second-generation HIV protease inhibitor with improved pharmacokinetics that is chemically related to the clinical inhibitor amprenavir. UIC-94017 is a broad-spectrum potent inhibitor active against HIV-1 clinical isolates with minimal cytotoxicity. We have determined the high-resolution crystal structures of UIC-94017 in complexes with wild-type HIV-1 protease (PR) and mutant proteases PR(V82A) and PR(I84V) that are common in drug-resistant HIV. The structures were refined at resolutions of 1.10-1.53A. The crystal structures of PR and PR(I84V) with UIC-94017 ternary complexes show that the inhibitor binds to the protease in two overlapping positions, while the PR(V82A) complex had one ordered inhibitor. In all three structures, UIC-94017 forms hydrogen bonds with the conserved main-chain atoms of Asp29 and Asp30 of the protease. These interactions are proposed to be critical for the potency of this compound against HIV isolates that are resistant to multiple protease inhibitors. Other small differences were observed in the interactions of the mutants with UIC-94017 as compared to PR. PR(V82A) showed differences in the position of the main-chain atoms of residue 82 compared to PR structure that better accommodated the inhibitor. Finally, the 1.10A resolution structure of PR(V82A) with UIC-94017 showed an unusual distribution of electron density for the catalytic aspartate residues, which is discussed in relation to the reaction mechanism.     

Synthesis of a nucleoside bioconjugate system as a potential anti-HIV agent.

Synthesis and anti-HIV data for a bioconjugate molecule incorporating a HIV protease inhibitor (A74704) and a HIV RT inhibitor (d4T) are presented.     

The crystal structures at 2.2-A resolution of hydroxyethylene-based inhibitors bound to human immunodeficiency virus type 1 protease show that the inhibitors are present in two distinct orientations.

As part of a structure-based drug design program directed against enzyme targets in the human immunodeficiency virus (HIV), we have determined the three-dimensional structures of the HIV type 1 protease complexed with two hydroxyethylene-based inhibitors. The inhibitors (SKF 107457 and SKF 108738) are hexapeptide substrate analogues with the scissile bond being replaced by a hydroxyethylene isostere. The structures were determined using x-ray diffraction data to 2.2 A measured at the Cornell High Energy Synchrotron Source on hexagonal crystals of each of the complexes. The structures have been extensively refined using a reciprocal space least-squares method to conventional crystallographic R factors of 0.186 and 0.159, respectively. The protein structure differs from that in the unliganded state of the enzyme and is most similar to that of the structure of the other reported (Jaskolski, M., Tomasselli, A. G., Sawyer, T. K., Staples, D. G., Heinrikson, R. L., Schneider, J., Kent, S. B. H., and Wlodawer, A. (1990) Biochemistry 29, 5889-5907) hydroxyethylene-based inhibitor complex. Unlike in that structure, however, the inhibitors are observed, in the present crystal structures, in two equally abundant orientations that are a consequence of the homodimeric nature of the enzyme coupled with the asymmetric structures of the inhibitors. Although the differences between the two inhibitors used in the present study are confined to the P1' site, the van der Waals interactions made by the inhibitor atoms with the amino acid residues in the protein differ throughout the structures of the inhibitors.     

Synthesis of a Nucleoside Bioconjugate System as a Potential Anti-HIV Agent

Abstract

Synthesis and anti-HIV data for a bioconjugate molecule incorporating a HIV protease inhibitor (A74704) and a HIV RT inhibitor (d4T) are presented.     

Viability of a drug-resistant human immunodeficiency virus type 1 protease variant: structural insights for better antiviral therapy

Under the selective pressure of protease inhibitor therapy, patients infected with human immunodeficiency virus (HIV) often develop drug-resistant HIV strains. One of the first drug-resistant mutations to arise in the protease, particularly in patients receiving indinavir or ritonavir treatment, is V82A, which compromises the binding of these and other inhibitors but allows the virus to remain viable. To probe this drug resistance, we solved the crystal structures of three natural substrates and two commercial drugs in complex with an inactive drug-resistant mutant (D25N/V82A) HIV-1 protease. Through structural analysis and comparison of the protein-ligand interactions, we found that Val82 interacts more closely with the drugs than with the natural substrate peptides. The V82A mutation compromises these interactions with the drugs while not greatly affecting the substrate interactions, which is consistent with previously published kinetic data. Coupled with our earlier observations, these findings suggest that future inhibitor design may reduce the probability of the appearance of drug-resistant mutations by targeting residues that are essential for substrate recognition.     

Potassium-dependent folding: a key to intracellular delivery of G-quartet oligonucleotides as HIV inhibitors

Several groups have demonstrated that G-rich oligonucleotides forming G-quartet structures display activity as potential drugs, such as potent HIV inhibitors. The delivery of G-quartet oligonucleotides to their intracellular targets is a key obstacle to overcome for their clinical success. Here we have developed a novel system to deliver G-rich oligonucleotides into the cell nucleus, e.g., the site of HIV integration. On the basis of the property of potassium-induced formation of G-quartet structure, we explored the difference of K(+) concentrations inside (140 mM) and outside (4 mM) cells to induce the G-rich oligonucleotides to form different structures inside and outside cells. The key steps of this delivery system include the following: (i) First, the G-quartet structure is denatured to form a lipid-DNA complex, so that the molecules can be well delivered into cells. (ii) Then the delivered molecules are induced to form G-quartet structures by potassium inside cells since the G-quartet structure is the primary requirement for inhibition of HIV-1 HIV integrase (IN) activity. The molecules of a novel G-quartet HIV inhibitor, T40214, with the sequence of (GGGC)(4) were successfully delivered into the nuclei of target cells, which significantly decreased HIV-1 replication and increased the probability to target HIV-1 IN in infected cells.     

Three-dimensional solution structure of the HIV-1 protease complexed with DMP323, a novel cyclic urea-type inhibitor, determined by nuclear magnetic resonance spectroscopy.

The three-dimensional solution structure of the HIV-1 protease homodimer, MW 22.2 kDa, complexed to a potent, cyclic urea-based inhibitor, DMP323, is reported. This is the first solution structure of an HIV protease/inhibitor complex that has been elucidated. Multidimensional heteronuclear NMR spectra were used to assemble more than 4,200 distance and angle constraints. Using the constraints, together with a hybrid distance geometry/simulated annealing protocol, an ensemble of 28 NMR structures was calculated having no distance or angle violations greater than 0.3 A or 5 degrees, respectively. Neglecting residues in disordered loops, the RMS deviation (RMSD) for backbone atoms in the family of structures was 0.60 A relative to the average structure. The individual NMR structures had excellent covalent geometry and stereochemistry, as did the restrained minimized average structure. The latter structure is similar to the 1.8-A X-ray structure of the protease/DMP323 complex (Chang CH et al., 1995, Protein Science, submitted); the pairwise backbone RMSD calculated for the two structures is 1.22 A. As expected, the mismatch between the structures is greatest in the loops that are disordered and/or flexible. The flexibility of residues 37-42 and 50-51 may be important in facilitating substrate binding and product release, because these residues make up the respective hinges and tips of the protease flaps. Flexibility of residues 4-8 may play a role in protease regulation by facilitating autolysis.     

Characterization of Structure,Dynamics, and Detergent Interactions of the Anti-HIV Chemokine Variant 5P12-RANTES

RANTES (CCL5) is a chemokine that recruits immune cells to inflammatory sites by interacting with the G-protein coupled receptor CCR5, which is also the primary coreceptor used together with CD4 by HIV to enter and infect target cells. Ligands of CCR5, including chemokines and chemokine analogs, are capable of blocking HIV entry, and studies of their structures and interactions with CCR5 will be key to understanding and optimizing HIV inhibition. The RANTES derivative 5P12-RANTES is a highly potent HIV entry inhibitor that is being developed as a topical HIV prevention agent (microbicide). We have characterized the structure and dynamics of 5P12-RANTES by solution NMR. With the exception of the nine flexible N-terminal residues, 5P12-RANTES has the same structure as wild-type RANTES but unlike the wild-type, does not dimerize via its N-terminus. To prepare the ground for interaction studies with detergent-solubilized CCR5, we have also investigated the interaction of RANTES and 5P12-RANTES with various commonly used detergents. Both RANTES variants are stable in Cymal-5, DHPC, Anzergent-3-12, dodecyltrimethylammonium chloride, and a DDM/CHAPS/CHS mixture. Fos-Cholines, dodecyldimethylglycine, and sodium dodecyl-sulfate denature both RANTES variants at low pH, whereas at neutral pH the stability is considerably higher. The onset of Fos-Choline-12-induced denaturation and the denatured state were characterized by circular dichroism and NMR. The detergent interaction starts below the critical micelle concentration at a well-defined mixed hydrophobic/positive surface region of the chemokine, which overlaps with the dimer interface. An increase of Fos-Choline-12 concentration above the critical micelle concentration causes a transition to a denatured state with a high α-helical content.     

Semisynthetic analogues of PSC-RANTES, a potent anti-HIV protein

New HIV prevention methods are needed, and among those currently being explored are "microbicides", substances applied topically to prevent HIV acquisition during sexual intercourse. The chemokine analogue PSC-RANTES (N(alpha)(n-nonanoyl)-des-Ser(1)-[ L-thioprolyl(2), L-cyclohexylglycyl(3)]-RANTES(4-68)) is a highly potent HIV entry inhibitor which has shown promising efficacy in its initial evaluation as a candidate microbicide. However, a way must be found to produce the molecule by cheaper means than total chemical synthesis. Since the only noncoded structures are located at the N-terminus, a possible solution would be to produce a protein fragment representing all but the N-terminal region using low-cost recombinant production methods and then to attach, site specifically, a short synthetic fragment containing the noncoded N-terminal structures. Here, we describe the evaluation of a range of different conjugation chemistries in order to identify those with potential for development as economical routes to production of a PSC-RANTES analogue with antiviral activity as close as possible to that of the parent protein. The strategies tested involved linkage through oxime, hydrazone/hydrazide, and Psi[CH2-NH] bonds, as well as through a peptide bond obtained either by a thiazolidine rearrangement or by direct alpha-amino acylation of a protein fragment in which 4 of the 5 lysine residues of the native sequence were replaced by arginine (the fifth lysine is essential for activity). Where conjugation involved replacement of one or more residues with a linker moiety, the point in the main chain at which the linker was introduced was varied. The resulting panel of 22 PSC-RANTES analogues was evaluated for anti-HIV activity in an entry inhibition assay. The [Arg (25,45,56,57)] PSC-RANTES analogue has comparable potency to PSC-RANTES, and one of the oxime linked analogues, 4L-57, has potency only 5-fold lower, with scope for improvement. Both represent promising leads for development as microbicide compounds that could be produced at low cost via semisynthesis.     

Characterization of Structure,Dynamics, and Detergent Interactions of the Anti-HIV Chemokine Variant 5P12-RANTES

RANTES (CCL5) is a chemokine that recruits immune cells to inflammatory sites by interacting with the G-protein coupled receptor CCR5, which is also the primary coreceptor used together with CD4 by HIV to enter and infect target cells. Ligands of CCR5, including chemokines and chemokine analogs, are capable of blocking HIV entry, and studies of their structures and interactions with CCR5 will be key to understanding and optimizing HIV inhibition. The RANTES derivative 5P12-RANTES is a highly potent HIV entry inhibitor that is being developed as a topical HIV prevention agent (microbicide). We have characterized the structure and dynamics of 5P12-RANTES by solution NMR. With the exception of the nine flexible N-terminal residues, 5P12-RANTES has the same structure as wild-type RANTES but unlike the wild-type, does not dimerize via its N-terminus. To prepare the ground for interaction studies with detergent-solubilized CCR5, we have also investigated the interaction of RANTES and 5P12-RANTES with various commonly used detergents. Both RANTES variants are stable in Cymal-5, DHPC, Anzergent-3-12, dodecyltrimethylammonium chloride, and a DDM/CHAPS/CHS mixture. Fos-Cholines, dodecyldimethylglycine, and sodium dodecyl-sulfate denature both RANTES variants at low pH, whereas at neutral pH the stability is considerably higher. The onset of Fos-Choline-12-induced denaturation and the denatured state were characterized by circular dichroism and NMR. The detergent interaction starts below the critical micelle concentration at a well-defined mixed hydrophobic/positive surface region of the chemokine, which overlaps with the dimer interface. An increase of Fos-Choline-12 concentration above the critical micelle concentration causes a transition to a denatured state with a high α-helical content.     

Resistance mechanism revealed by crystal structures of unliganded nelfinavir-resistant HIV-1 protease non-active site mutants N88D and N88S

Nelfinavir is an inhibitor of HIV-1 protease, and is used for treatment of patients suffering from HIV/AIDS. However, treatment results in drug resistant mutations in HIV-1 protease. N88D and N88S are two such mutations which occur in the non-active site region of the enzyme. We have determined crystal structures of unliganded N88D and N88S mutants of HIV-1 protease to resolution of 1.65 Å and 1.8 Å, respectively. These structures refined against synchrotron data lead to R-factors of 0.1859 and 0.1780, respectively. While structural effects of N88D are very subtle, the mutation N88S has caused a significant conformational change in D30, an active site residue crucial for substrate and inhibitor binding.     

X-ray structure of RLI, an essential twin cassette ABC ATPase involved in ribosome biogenesis and HIV capsid assembly

The ABC ATPase RNase-L inhibitor (RLI) emerges as a key enzyme in ribosome biogenesis, formation of translation preinitiation complexes, and assembly of HIV capsids. To help reveal the structural mechanism of RLI, we determined the Mg2+-ADP bound crystal structure of the twin cassette ATPase of P. furiosus RLI at 1.9 A resolution and analyzed functional motifs in yeast in vivo. RLI shows similarities but also differences to known ABC enzyme structures. Twin nucleotide binding domains (NBD1 and NBD2) are arranged to form two composite active sites in their interface cleft, indicating they undergo the ATP-driven clamp-like motion of the NBDs of ABC transporters. An unusual "hinge" domain along the NBD1:NBD2 interface provides a frame for association and possibly ATP-driven conformational changes of the NBDs. Our results establish a first structural basis for ABC domain heterodimers and suggest that RLI may act as mechanochemical enzyme in ribosome and HIV capsid biogenesis.     

The dimerization domain of HIV-1 viral infectivity factor Vif is required to block virion incorporation of APOBEC3G

We have obtained the 1.7 Å crystal structure of FIV protease (PR) in which 12 critical residues around the active site have been substituted with the structurally equivalent residues of HIV PR (12X FIV PR). The chimeric PR was crystallized in complex with the broad-based inhibitor TL-3, which inhibits wild type FIV and HIV PRs, as well as 12X FIV PR and several drug-resistant HIV mutants [1–4]. Biochemical analyses have demonstrated that TL-3 inhibits these PRs in the order HIV PR > 12X FIV PR > FIV PR, with K_i values of 1.5 nM, 10 nM, and 41 nM, respectively [2–4]. Comparison of the crystal structures of the TL-3 complexes of 12X FIV and wild-typeFIV PR revealed theformation of additinal van der Waals interactions between the enzyme inhibitor in the mutant PR. The 12X FIV PR retained the hydrogen bonding interactions between residues in the flap regions and active site involving the enzyme and the TL-3 inhibitor in comparison to both FIV PR and HIV PR. However, the flap regions of the 12X FIV PR more closely resemble those of HIV PR, having gained several stabilizing intra-flap interactions not present in wild type FIV PR. These findings offer a structural explanation for the observed inhibitor/substrate binding properties of the chimeric PR.     

Chemical compound navigator: a web-based chem-BLAST, chemical taxonomy-based search engine for browsing compounds

A novel technique to annotate, query, and analyze chemical compounds has been developed and is illustrated by using the inhibitor data on HIV protease-inhibitor complexes. In this method, all chemical compounds are annotated in terms of standard chemical structural fragments. These standard fragments are defined by using criteria, such as chemical classification; structural, chemical, or functional groups; and commercial, scientific or common names or synonyms. These fragments are then organized into a data tree based on their chemical substructures. Search engines have been developed to use this data tree to enable query on inhibitors of HIV protease (http://xpdb.nist.gov/hivsdb/hivsdb.html). These search engines use a new novel technique, Chemical Block Layered Alignment of Substructure Technique (Chem-BLAST) to search on the fragments of an inhibitor to look for its chemical structural neighbors. This novel technique to annotate and query compounds lays the foundation for the use of the Semantic Web concept on chemical compounds to allow end users to group, sort, and search structural neighbors accurately and efficiently. During annotation, it enables the attachment of "meaning" (i.e., semantics) to data in a manner that far exceeds the current practice of associating "metadata" with data by creating a knowledge base (or ontology) associated with compounds. Intended users of the technique are the research community and pharmaceutical industry, for which it will provide a new tool to better identify novel chemical structural neighbors to aid drug discovery.     

Structural, kinetic, and thermodynamic studies of specificity designed HIV-1 protease

HIV-1 protease recognizes and cleaves more than 12 different substrates leading to viral maturation. While these substrates share no conserved motif, they are specifically selected for and cleaved by protease during viral life cycle. Drug resistant mutations evolve within the protease that compromise inhibitor binding but allow the continued recognition of all these substrates. While the substrate envelope defines a general shape for substrate recognition, successfully predicting the determinants of substrate binding specificity would provide additional insights into the mechanism of altered molecular recognition in resistant proteases. We designed a variant of HIV protease with altered specificity using positive computational design methods and validated the design using X-ray crystallography and enzyme biochemistry. The engineered variant, Pr3 (A28S/D30F/G48R), was designed to preferentially bind to one out of three of HIV protease's natural substrates; RT-RH over p2-NC and CA-p2. In kinetic assays, RT-RH binding specificity for Pr3 increased threefold compared to the wild-type (WT), which was further confirmed by isothermal titration calorimetry. Crystal structures of WT protease and the designed variant in complex with RT-RH, CA-p2, and p2-NC were determined. Structural analysis of the designed complexes revealed that one of the engineered substitutions (G48R) potentially stabilized heterogeneous flap conformations, thereby facilitating alternate modes of substrate binding. Our results demonstrate that while substrate specificity could be engineered in HIV protease, the structural pliability of protease restricted the propagation of interactions as predicted. These results offer new insights into the plasticity and structural determinants of substrate binding specificity of the HIV-1 protease.