The effect of solid surface tension and exposure to elevated hydrodynamic shear on Pseudomonas fluorescens biofilms grown on modified titanium surfaces

Abstract

The solid surface tension of titanium was varied by using organosilane monolayers of various terminations, minimising differences in other material properties. Both the quantity of Pseudomonas fluorescens biofilms grown on the modified surfaces, and the percentage of biofilm remaining after exposure to hydrodynamic shear stress, varied significantly as a function of solid surface tension. The quantity of biofilm was less on chloropropyl-terminated surfaces than on an alkyl-terminated surfaces. However, the percentage of biofilm remaining after exposure to hydrodynamic shear stress (which depends on the adhesion and cohesion strengths of the biofilm) was less for the alkyl-terminated surface than for the chloropropyl-terminated surface, for one of the two sample sets analysed. These results demonstrate the importance of differentiating between the quantity of biofilm on a surface and the adhesion and cohesion strength of the biofilm, and may help explain discrepancies in the existing literature regarding the effect of solid surface tension on the propensity of a surface for microfouling.     

Adhesion and biofilm development on suspended carriers in airlift reactors: hydrodynamic conditions versus surface characteristics

Adhesion and biofilm formation by Pseudomonas putida was studied using suspended carriers in laboratory airlift reactors. Standard, roughened, hydrophobic, and positively charged glass beads, sand, and basalt grains were used as carriers. The results clearly show that in airlift reactors hydrodynamic conditions and particle collisions control biofilm formation. In the reactors, on surfaces subjected to different shear levels, biofilm formation differed considerably. This could be described by a simple growth and detachment model. Increased surface roughness promoted biofilm accumulation on suspended carriers. The physicochemical surface characteristics of the carrier surface proved to be less important due to the turbulent conditions in the airlift reactors. Adhesion of P. putida to glass beads was poor, and results of an adhesion test under quiescent conditions were not predictive for adhesion and subsequent biofilm formation under reactor conditions. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:880-889, 1997.     

Biofilm formation behaviour of marine filamentous cyanobacterial strains in controlled hydrodynamic conditions

Marine biofouling has severe economic impacts and cyanobacteria play a significant role as early surface colonizers. Despite this fact, cyanobacterial biofilm formation studies in controlled hydrodynamic conditions are scarce. In this work, computational fluid dynamics was used to determine the shear rate field on coupons that were placed inside the wells of agitated 12-well microtiter plates. Biofilm formation by three different cyanobacterial strains was assessed at two different shear rates (4 and 40 s⁻¹) which can be found in natural ecosystems and using different surfaces (glass and perspex). Biofilm formation was higher under low shear conditions, and differences obtained between surfaces were not always statistically significant. The hydrodynamic effect was more noticeable during the biofilm maturation phase rather than during initial cell adhesion and optical coherence tomography showed that different shear rates can affect biofilm architecture. This study is particularly relevant given the cosmopolitan distribution of these cyanobacterial strains and the biofouling potential of these organisms.     

Adhesion of the marine fouling diatom amphora coffeaeformis to non‐solid gel surfaces

Diatom adhesion to different gel surfaces was tested under different shear conditions, using the fouling marine diatom Amphora coffeaeformis as test organism. Four polymers were selected to obtain a test matrix containing gels with different surface charge as well as different surface energies, viz. agarose, alginate, chitosan and chemically modified polyvinylalcohol (PVA‐SbQ). Three experimental systems were applied to obtain different shear rates. Experimental system 1 consisted of gels cast in a cell culturing well plate for comparing initial adhesion as well as long term biofilm development in the absence of shear. In experimental system 2, microscope slide based test surfaces were tested in aquaria under low shear conditions. A rotating annular biofilm reactor was used to obtain high and controlled shear rates. At high shear rates A. coffeaeformis cells adhered better to the charged polymer gels (alginate and chitosan) than to the low charged polymer gels (agarose and PVA‐SbQ). In the system where shear was absent A. coffeaeformis cells developed a biofilm on agarose equivalent to the charged polymer gels, while adhesion to PVA‐SbQ remained low at all shear rates. It is concluded that non‐solid surfaces did not represent an obstacle to settling and growth of this organism. As observed for solid surfaces, low charge density led to reduced attachment, particularly at high shear.     

A novel biofilm channel for evaluating the adhesion of diatoms to non-biocidal coatings

Laboratory assessment of the adhesion of diatoms to non-toxic fouling-release coatings has tended to focus on single cells rather than the more complex state of a biofilm. A novel culture system based on open channel flow with adjustable bed shear stress values (0–2.4?Pa) has been used to produce biofilms of Navicula incerta. Biofilm development on glass and polydimethylsiloxane elastomer (PDMSe) showed a biphasic relationship with bed shear stress, which was characterised by regions of biofilm stability and instability reflecting cohesion between cells relative to the adhesion to the substratum. On glass, a critical shear stress of 1.3–1.4?Pa prevented biofilm development, whereas on PDMS, biofilms continued to grow at 2.4?Pa. Studies of diatom biofilms cultured on zwitterionic coatings using a bed shear stress of 0.54?Pa showed lower biomass production and adhesion strength on poly(sulfobetaine methacrylate) compared to poly(carboxybetaine methacrylate). The dynamic biofilm approach provides additional information to supplement short duration laboratory evaluations.     

Flow cell hydrodynamics and their effects on E. coli biofilm formation under different nutrient conditions and turbulent flow

Biofilm formation is a major factor in the growth and spread of both desirable and undesirable bacteria as well as in fouling and corrosion. In order to simulate biofilm formation in industrial settings a flow cell system coupled to a recirculating tank was used to study the effect of a high (550 mg glucose l?1) and a low (150 mg glucose l?1) nutrient concentration on the relative growth of planktonic and attached biofilm cells of Escherichia coli JM109(DE3). Biofilms were obtained under turbulent flow (a Reynolds number of 6000) and the hydrodynamic conditions of the flow cell were simulated by using computational fluid dynamics. Under these conditions, the flow cell was subjected to wall shear stresses of 0.6 Pa and an average flow velocity of 0.4 m s?1 was reached. The system was validated by studying flow development on the flow cell and the applicability of chemostat model assumptions. Full development of the flow was assessed by analysis of velocity profiles and by monitoring the maximum and average wall shear stresses. The validity of the chemostat model assumptions was performed through residence time analysis and identification of biofilm forming areas. These latter results were obtained through wall shear stress analysis of the system and also by assessment of the free energy of interaction between E. coli and the surfaces. The results show that when the system was fed with a high nutrient concentration, planktonic cell growth was favored. Additionally, the results confirm that biofilms adapt their architecture in order to cope with the hydrodynamic conditions and nutrient availability. These results suggest that until a certain thickness was reached nutrient availability dictated biofilm architecture but when that critical thickness was exceeded mechanical resistance to shear stress (ie biofilm cohesion) became more important.     

Novel whole cell adhesion assays of three isolates of the fouling diatom Amphora coffeaeformis reveal diverse responses to surfaces of different wettability

Whole cell, strength of adhesion assays of three different isolates of the fouling diatom Amphora coffeaeformis were compared using a hydrophilic surface viz. acid washed glass (AWG), and a hydrophobic surface viz. a self assembled monolayer (SAM) of undecanethiol (UDT). Assays were performed using a newly designed turbulent flow channel that permits direct observation and recording of cell populations on a test surface. Exposure to continuous shear stress over 3?h revealed that the more motile isolate, WIL2, adhered much more strongly to both test surfaces compared to the other two strains. When the response of the isolates to shear stress after 3?h was compared, there was no significant difference in the percentage of cells removed, irrespective of surface wettability. Cells of the three isolates of A. coffeaeformis varied significantly in their response to different surfaces during initial adhesion, indicating the presence of a wide range of 'physiological races' within this species.     

Novel whole cell adhesion assays of three isolates of the fouling diatom Amphora coffeaeformis reveal diverse responses to surfaces of different wettability

Whole cell, strength of adhesion assays of three different isolates of the fouling diatom Amphora coffeaeformis were compared using a hydrophilic surface viz. acid washed glass (AWG), and a hydrophobic surface viz. a self assembled monolayer (SAM) of undecanethiol (UDT). Assays were performed using a newly designed turbulent flow channel that permits direct observation and recording of cell populations on a test surface. Exposure to continuous shear stress over 3 h revealed that the more motile isolate, WIL2, adhered much more strongly to both test surfaces compared to the other two strains. When the response of the isolates to shear stress after 3 h was compared, there was no significant difference in the percentage of cells removed, irrespective of surface wettability. Cells of the three isolates of A. coffeaeformis varied significantly in their response to different surfaces during initial adhesion, indicating the presence of a wide range of ‘physiological races’ within this species.     

Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces

Well-established biofilms formed by Streptococcus mutans via exopolysaccharide matrix synthesis are firmly attached to tooth surfaces. Enhanced understanding of the physical properties of mature biofilms may lead to improved approaches to detaching or disassembling these highly organized and adhesive structures. Here, the mechanical stability of S. mutans biofilms was investigated by determining their ability to withstand measured applications of shear stress using a custom-built device. The data show that the initial biofilm bulk (~ 50% biomass) was removed after exposure to 0.184 and 0.449 N m^?2 for 67 and 115 h old biofilms. However, removal of the remaining biofilm close to the surface was significantly reduced (vs initial bulk removal) even when shear forces were increased 10-fold. Treatment of biofilms with exopolysaccharide-digesting dextranase substantially compromised their mechanical stability and rigidity, resulting in bulk removal at a shear stress as low as 0.027 N m^?2 and > a two-fold reduction in the storage modulus (G′). The data reveal how incremental increases in shear stress cause distinctive patterns of biofilm detachment, while demonstrating that the exopolysaccharide matrix modulates the resistance of biofilms to mechanical clearance.     

Platelet lysis and aggregation in shear fields.

A rotational viscometer was used to study the effects of shear stress on platelets in human platelet-rich plasma (PRP). For 5-min exposure times, shear stresses above 160 dynes/cm2 induced platelet lysis (as determined by release of platelet lactic dehydrogenase). For 30-s exposure times, shear stresses greater than 600 dynes/cm2 were required to induce platelet lysis. The platelet counts of sheared PRP were decreased to as low as one-fifth the original count due largely to shear-induced aggregation. The count is a minimum at intermediate stress levels (200-400 dynes/cm2). Higher stresses induce disaggregation as well as lysis. The diminution in the counts was partially reversed in 2 h incubation after cessation of shearing. Experiments were carried out with three different viscometer configurations so that the shear stress and the solid surface area access could be varied independently. Surface access was not a significant variable in the conditions of the experiments. Thus aggregation and lysis may be induced by stress effects alone as well as by solid surface effects. The results also show that the response of platelets to shear stress is strongly dependent on exposure time. Platelets are much less resistant to shear stress than red cells for relatively long exposure times. However, the converse is true for very short exposure times.     

Shear stress effects on production of exopolymeric substances and biofilm characteristics during phenol biodegradation by immobilized Pseudomonas desmolyticum (NCIM2112) cells in a pulsed plate bioreactor

This article reports studies on a continuous pulsed plate bioreactor (PPBR) with the cells of Pseudomonas desmolyticum (NCIM2112) immobilized on granular activated carbon (GAC) used as a biofilm reactor for biodegradation of phenol. Almost complete removal of 200 ppm phenol could be achieved in this bioreactor. Biofilm structure and characteristics are influenced by hydrodynamic and shear conditions in bioreactors. In this article, the effect of shear stress induced by frequency of pulsation on biofilm characteristics during the startup period in the PPBR is reported. The startup time decreased with the increase in frequency of pulsation. The formation of biofilm in PPBR was found to have three phases: accumulation, compaction, and plateau. The effect of frequency on production of exoploymeric substances (EPS) such as, protein, carbohydrate, and humic substance is reported. An increase in shear stress induced by the frequency of pulsation increased the production of exopolymeric substances in the biofilm during startup of the bioreactor. Increase in shear stress caused a decrease in biofilm thickness and an increase in dry density of the biofilm. Increase in shear stress resulted in a smoother and thinner biofilm surface with more compact and dense structure.     

I-domain of lymphocyte function-associated antigen-1 mediates rolling of polystyrene particles on ICAM-1 under flow

In their active state, beta(2)-integrins, such as LFA-1, mediate the firm arrest of leukocytes by binding intercellular adhesion molecules (ICAMs) expressed on endothelium. Although the primary function of LFA-1 is assumed to be the ability to mediate firm adhesion, recent work has shown that LFA-1 can contribute to cell tethering and rolling under hydrodynamic flow, a role previously largely attributed to the selectins. The inserted (I) domain of LFA-1 has recently been crystallized in the wild-type (wt) and locked-open conformations and has been shown to, respectively, support rolling and firm adhesion under flow when expressed in alpha(L)beta(2) heterodimers or as isolated domains on cells. Here, we report results from cell-free adhesion assays where wt I-domain-coated polystyrene particles were allowed to interact with ICAM-1-coated surfaces in shear flow. We show that wt I-domain can independently mediate the capture of particles from flow and support their rolling on ICAM-1 surfaces in a manner similar to how carbohydrate-selectin interactions mediate rolling. Adhesion is specific and blocked by appropriate antibodies. We also show that the rolling velocity of I-domain-coated particles depends on the wall shear stress in flow chamber, I-domain site density on microsphere surfaces, and ICAM-1 site density on substrate surfaces. Furthermore, we show that rolling is less sensitive to wall shear stress and ICAM-1 substrate density at high density of I-domain on the microsphere surface. Computer simulations using adhesive dynamics can recreate bead rolling dynamics and show that the mechanochemical properties of ICAM-1-I-domain interactions are similar to those of carbohydrate-selectin interactions. Understanding the biophysics of adhesion mediated by the I-domain of LFA-1 can elucidate the complex roles this integrin plays in leukocyte adhesion in inflammation.     

Reproducible Biofilm Cultivation of Chemostat-Grown Escherichia coli and Investigation of Bacterial Adhesion on Biomaterials Using a Non-Constant-Depth Film Fermenter

Biomaterials-associated infections are primarily initiated by the adhesion of microorganisms on the biomaterial surfaces and subsequent biofilm formation. Understanding the fundamental microbial adhesion mechanisms and biofilm development is crucial for developing strategies to prevent such infections. Suitable in vitro systems for biofilm cultivation and bacterial adhesion at controllable, constant and reproducible conditions are indispensable. This study aimed (i) to modify the previously described constant-depth film fermenter for the reproducible cultivation of biofilms at non-depth-restricted, constant and low shear conditions and (ii) to use this system to elucidate bacterial adhesion kinetics on different biomaterials, focusing on biomaterials surface nanoroughness and hydrophobicity. Chemostat-grown Escherichia coli were used for biofilm cultivation on titanium oxide and investigating bacterial adhesion over time on titanium oxide, poly(styrene), poly(tetrafluoroethylene) and glass. Using chemostat-grown microbial cells (single-species continuous culture) minimized variations between the biofilms cultivated during different experimental runs. Bacterial adhesion on biomaterials comprised an initial lag-phase I followed by a fast adhesion phase II and a phase of saturation III. With increasing biomaterials surface nanoroughness and increasing hydrophobicity, adhesion rates increased during phases I and II. The influence of materials surface hydrophobicity seemed to exceed that of nanoroughness during the lag-phase I, whereas it was vice versa during adhesion phase II. This study introduces the non-constant-depth film fermenter in combination with a chemostat culture to allow for a controlled approach to reproducibly cultivate biofilms and to investigate bacterial adhesion kinetics at constant and low shear conditions. The findings will support developing and adequate testing of biomaterials surface modifications eventually preventing biomaterial-associated infections.     

Novel experimental study of receptor-mediated bacterial adhesion under the influence of fluid shear

Dynamic adhesion of cells to surfaces is a vital step in a variety of biochemical and physiological phenomena. Bacterial adhesion is responsible not only for problems associated with biofouling and biofilm formation in the biochemical industry but also in the initiation of certain infectious diseases. In this study, we report the effect of critical parameters, such as receptor and ligand densities and shear rate, on receptor-mediated dynamic bacterial adhesion. Adhesion of a pathogenic strain of Staphylococcus aureus to immobilized collagen was studied. The receptor density on the cell surface was varied by harvesting cells at different growth times and was quantified using flow cytometry. Dynamic adhesion experiments were conducted over a range of physiologically relevant shear rates (50 to 1500 s(-1)) using a parallel-plate flow chamber. Video microscopy coupled with digital image processing was employed to quantify adhesion. A semiquantitative comparison between experimental results and theoretical data obtained using a previously proposed mathematical model was also performed. The results suggest that dynamic adhesion is dependent on receptor density and shear rate, but independent of ligand density. This report demonstrates the feasibility of using bacteria to study fundamental aspects of receptor-mediated dynamic adhesion.     

Dependence of the initial adhesion of biofilm forming Pseudomonas putida mt2 on physico-chemical material properties

Bacterial adhesion is strongly dependent on the physico-chemical properties of materials and plays a fundamental role in the development of a growing biofilm. Selected materials were characterized with respect to their physico-chemical surface properties. The different materials, glass and several polymer foils, showed a stepwise range of surface tensions (γ(s)) between 10.3 and 44.7 mN m(-1). Measured zeta potential values were in the range between -74.8 and -28.3 mV. The initial bacterial adhesion parameter q(max) was found to vary between 6.6 × 10(6) and 28.1 × 10(6) cm(-2). By correlation of the initial adhesions kinetic parameters with the surface tension data, the optimal conditions for the immobilization of Pseudomonas putida mt2 were found to be at a surface tension of 24.7 mN m(-1). Both higher and lower surface tensions lead to a smaller number of adherent cells per unit surface area. Higher energy surfaces, commonly termed hydrophilic, could constrain bacterial adhesion because of their more highly ordered water structure (exclusion zone) close to the surface. At low energy surfaces, commonly referred to as hydrophobic, cell adhesion is inhibited due to a thin, less dense zone (depletion layer or clathrate structure) close to the surface. Correlation of q (max) with zeta potential results in a linear relationship. Since P. putida carries weak negative charges, a measurable repulsive effect can be assumed on negative surfaces.     

Quantitative characterization of the influence of the nanoscale morphology of nanostructured surfaces on bacterial adhesion and biofilm formation

Bacterial infection of implants and prosthetic devices is one of the most common causes of implant failure. The nanostructured surface of biocompatible materials strongly influences the adhesion and proliferation of mammalian cells on solid substrates. The observation of this phenomenon has led to an increased effort to develop new strategies to prevent bacterial adhesion and biofilm formation, primarily through nanoengineering the topology of the materials used in implantable devices. While several studies have demonstrated the influence of nanoscale surface morphology on prokaryotic cell attachment, none have provided a quantitative understanding of this phenomenon. Using supersonic cluster beam deposition, we produced nanostructured titania thin films with controlled and reproducible nanoscale morphology respectively. We characterized the surface morphology; composition and wettability by means of atomic force microscopy, X-ray photoemission spectroscopy and contact angle measurements. We studied how protein adsorption is influenced by the physico-chemical surface parameters. Lastly, we characterized Escherichia coli and Staphylococcus aureus adhesion on nanostructured titania surfaces. Our results show that the increase in surface pore aspect ratio and volume, related to the increase of surface roughness, improves protein adsorption, which in turn downplays bacterial adhesion and biofilm formation. As roughness increases up to about 20 nm, bacterial adhesion and biofilm formation are enhanced; the further increase of roughness causes a significant decrease of bacterial adhesion and inhibits biofilm formation. We interpret the observed trend in bacterial adhesion as the combined effect of passivation and flattening effects induced by morphology-dependent protein adsorption. Our findings demonstrate that bacterial adhesion and biofilm formation on nanostructured titanium oxide surfaces are significantly influenced by nanoscale morphological features. The quantitative information, provided by this study about the relation between surface nanoscale morphology and bacterial adhesion points towards the rational design of implant surfaces that control or inhibit bacterial adhesion and biofilm formation.     

Effect of surface shear stress on the attachment of Pseudomonas fluorescens to stainless steel under defined flow conditions

The application of the radial-flow growth chamber to the study of the initial stages of bacterial adhesion to surfaces under flowing conditions is reported. The adhesive properties of the bacterium Pseudomonas fluorescens (NCIB 9046) to stainless steel (type AISI 316) were found to be highly dependent on surface shear stress and the time and concentration of cells used in the incubation procedure. Maximum levels of adhesion occurred in zones of lowest surface shear stress, particularly less than 6-8 Nm(-2). Adhesion was still noticeable at shear stresses even up to 130 Nm(-2). Significant detachment of cells from a monolayer attached under static conditions was found to occur at surface shear stresses in excess of 10-12 Nm(-2).     

Impacts of hydrodynamic conditions and microscale surface roughness on the critical shear stress to develop and thickness of early-stage Pseudomonas putida biofilms

Biofilms can increase pathogenic contamination of drinking water, cause biofilm-related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early-stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early-stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early-stage Pseudomonas putida biofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early-stage biofilm growth is suppressed under high flow conditions and that the local velocity for early-stage P. putida biofilms (growth time < 14 h) to develop is about 50 μm/s, which is similar to P. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early-stage biofilms by increasing the area of the low-flow region. Furthermore, we show that the critical average shear stress, above which early-stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early-stage biofilm development, characterized in this study, will facilitate future predictions and managements of early-stage P. putida biofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments.     

Wettability of polymers by mucin aqueous solutions

The wettability of poly(methyl methacrylate) and polyethylene by water and aqueous mucin solutions have been studied by sessile drop and under-water captive air bubble contact angles, respectively. From the sessile drop and octane under-water contact angles the polymer-water interfaces have been characterized in terms of works of adhesion and acid-base (polar) interactions. A large water-air contact angle hysteresis observed with poly(methyl methacrylate) surfaces has been attributed to side-chain beta relaxations of polymer ester methyl groups. The wettabilities of the polymers by mucin aqueous solutions have been studied as a function of protein concentration and related to the surface tensions. A positive slope of adhesion tension vs surface tension line, characteristic of polar surfaces, was found with poly(methyl methacrylate). By contrast, a change in the slope, explained as a change in mucin relative adsorption densities at solid/liquid and solid/vapour interfaces, was observed with polyethylene. This adhesion tension behavior appeared to be in agreement with previous data we have published concerning the quantity and state of mucin which are adsorbed to polymers characterized by different surface properties.     

Characterization of planktonic and biofilm cells from two filamentous cyanobacteria using a shotgun proteomic approach

Abstract

Cyanobacteria promote marine biofouling with significant impacts. A qualitative proteomic analysis, by LC-MS/MS, of planktonic and biofilm cells from two cyanobacteria was performed. Biofilms were formed on glass and perspex at two relevant hydrodynamic conditions for marine environments (average shear rates of 4?s^?1 and 40?s^?1). For both strains and surfaces, biofilm development was higher at 4?s^?1. Biofilm development of Nodosilinea sp. LEGE 06145 was substantially higher than Nodosilinea sp. LEGE 06119, but no significant differences were found between surfaces. Overall, 377 and 301 different proteins were identified for Nodosilinea sp. LEGE 06145 and Nodosilinea sp. LEGE 06119. Differences in protein composition were more noticeable in biofilms formed under different hydrodynamic conditions than in those formed on different surfaces. Ribosomal and photosynthetic proteins were identified in most conditions. The characterization performed gives new insights into how shear rate and surface affect the planktonic to biofilm transition, from a structural and proteomics perspective.