Crystal structures of the ATPase subunit of the glucose ABC transporter from Sulfolobus solfataricus: nucleotide-free and nucleotide-bound conformations

The ABC-ATPase GlcV energizes a binding protein-dependent ABC transporter that mediates glucose uptake in Sulfolobus solfataricus. Here, we report high-resolution crystal structures of GlcV in different states along its catalytic cycle: distinct monomeric nucleotide-free states and monomeric complexes with ADP-Mg(2+) as a product-bound state, and with AMPPNP-Mg(2+) as an ATP-like bound state. The structure of GlcV consists of a typical ABC-ATPase domain, comprising two subdomains, connected by a linker region to a C-terminal domain of unknown function. Comparisons of the nucleotide-free and nucleotide-bound structures of GlcV reveal re-orientations of the ABCalpha subdomain and the C-terminal domain relative to the ABCalpha/beta subdomain, and switch-like rearrangements in the P-loop and Q-loop regions. Additionally, large conformational differences are observed between the GlcV structures and those of other ABC-ATPases, further emphasizing the inherent flexibility of these proteins. Notably, a comparison of the monomeric AMPPNP-Mg(2+)-bound GlcV structure with that of the dimeric ATP-Na(+)-bound LolD-E171Q mutant reveals a +/-20 degrees rigid body re-orientation of the ABCalpha subdomain relative to the ABCalpha/beta subdomain, accompanied by a local conformational difference in the Q-loop. We propose that these differences represent conformational changes that may have a role in the mechanism of energy-transduction and/or allosteric control of the ABC-ATPase activity in bacterial importers.     

Crystal structure of Escherichia coli SufC, an ABC-type ATPase component of the SUF iron-sulfur cluster assembly machinery

SufC is an ATPase component of the SUF machinery, which is involved in the biosynthesis of Fe-S clusters. To gain insight into the function of this protein, we have determined the crystal structure of Escherichia coli SufC at 2.5A resolution. Despite the similarity of the overall structure with ABC-ATPases (nucleotide-binding domains of ABC transporters), some key differences were observed. Glu171, an invariant residue involved in ATP hydrolysis, is rotated away from the nucleotide-binding pocket to form a SufC-specific salt bridge with Lys152. Due to this salt bridge, D-loop that follows Glu171 is flipped out to the molecular surface, which may sterically inhibit the formation of an active dimer. Thus, the salt bridge may play a critical role in regulating ATPase activity and preventing wasteful ATP hydrolysis. Furthermore, SufC has a unique Q-loop structure on its surface, which may form a binding site for its partner proteins, SufB and/or SufD.     

Apo,Zn2+-bound and Mn2+-bound structures reveal ligand-binding properties of SitA from the pathogen Staphylococcus pseudintermedius

The Gram-positive bacterium Staphylococcus pseudintermedius is a leading cause of canine bacterial pyoderma, resulting in worldwide morbidity in dogs. S. pseudintermedius also causes life-threatening human infections. Furthermore, methicillin-resistant S. pseudintermedius is emerging, resembling the human health threat of methicillin-resistant Staphylococcus aureus. Therefore it is increasingly important to characterize targets for intervention strategies to counteract S. pseudintermedius infections. Here we used biophysical methods, mutagenesis, and X-ray crystallography, to define the ligand-binding properties and structure of SitA, an S. pseudintermedius surface lipoprotein. SitA was strongly and specifically stabilized by Mn²⁺ and Zn²⁺ ions. Crystal structures of SitA complexed with Mn²⁺ and Zn²⁺ revealed a canonical class III solute-binding protein with the metal cation bound in a cavity between N- and C-terminal lobes. Unexpectedly, one crystal contained both apo- and holo-forms of SitA, revealing a large side-chain reorientation of His⁶⁴, and associated structural differences accompanying ligand binding. Such conformational changes may regulate fruitful engagement of the cognate ABC (ATP-binding cassette) transporter system (SitBC) required for metal uptake. These results provide the first detailed characterization and mechanistic insights for a potential therapeutic target of the major canine pathogen S. pseudintermedius, and also shed light on homologous structures in related staphylococcal pathogens afflicting humans.     

TopR2, the second reverse gyrase of Sulfolobus solfataricus, exhibits unusual properties

Whereas reverse gyrase is considered as a strong marker of thermophily, the function of this peculiar type IA topoisomerase still remains to be elucidated. The archaeon Sulfolobus solfataricus encodes two reverse gyrases, TopR1 and TopR2. This duplication seems to be important because most of Crenarcheota exhibit two copies of reverse gyrase. However, to date, while TopR1 has been well characterized, no characterization of TopR2 has been reported. In this study, we describe for the first time the activity of S. solfataricus TopR2 that appears as a new reverse gyrase. Indeed, in spite of the sequence similarities between TopR1 and TopR2, we evidence unexpected great differences between the two enzymes. While TopR1 exhibits ATP-independent relaxation activity, TopR2 does not, and its activity is strictly dependent on the presence of ATP. Whereas TopR1 is a distributive topoisomerase, TopR2 exhibits an amazing high intrinsic processivity compared to all the topoisomerases studied so far. TopR2 is able to introduce a very high number of positive superturns in DNA, while TopR1 generates weakly positively supercoiled DNA. Finally, TopR2 behaves differently from TopR1 when incubated at different assay temperatures. All the results presented in this study indicate that TopR1 and TopR2 have, in vitro, different activities suggesting different functions in vivo.     

Isolation and characterization of an intracellular aminopeptidase from the extreme thermophilic archaebacterium Sulfolobus solfataricus

An intracellular aminopeptidase (EC 3.4.11.-) was purified from the extreme thermophilic archaebacterium, Sulfolobus solfataricus. The molecular weight of the native enzyme was about 320,000, as calculated by gel-filtration studies, and a subunit Mr of 80,000 was estimated by SDS-polyacrylamide gel electrophoresis. The temperature optimum of the enzyme was at 75 degrees C and the pH optimum was found to be 6.5. The aminopeptidase was highly active against the chromogenic substrates L-Leu-p-NA and L-Ala-p-NA. The enzyme was inhibited by EDTA, but the activity could be partially restored by removal of the EDTA and incubation with Co2+ or Mn2+. Bestatin, a typical inhibitor of aminopeptidase, fully inhibited the enzyme activity, but inhibitors of serine proteinases had no effect. Beside a high thermostability, the enzyme showed a remarkable stability against 6 M urea, organic solvents and acetonitrile.     

The catalytic mechanism of indole-3-glycerol phosphate synthase: crystal structures of complexes of the enzyme from Sulfolobus solfataricus with substrate analogue,substrate, and product

Indoleglycerol phosphate synthase catalyzes the ring closure of an N-alkylated anthranilate to a 3-alkyl indole derivative, a reaction requiring Lewis acid catalysis in vitro. Here, we investigated the enzymatic reaction mechanism through X-ray crystallography of complexes of the hyperthermostable enzyme from Sulfolobus solfataricus with the substrate 1-(o-carboxyphenylamino) 1-deoxyribulose 5-phosphate, a substrate analogue and the product indole-3-glycerol phosphate. The substrate and the substrate analogue are bound to the active site in a similar, extended conformation between the previously identified phosphate binding site and a hydrophobic pocket for the anthranilate moiety. This binding mode is unproductive, because the carbon atoms that are to be joined are too far apart. The indole ring of the bound product resides in a second hydrophobic pocket adjacent to that of the anthranilate moiety of the substrate. Although the hydrophobic moiety of the substrate moves during catalysis from one hydrophobic pocket to the other, the triosephosphate moiety remains rigidly bound to the same set of hydrogen-bonding residues. Simultaneously, the catalytically important residues Lys53, Lys110 and Glu159 maintain favourable distances to the atoms of the ligand undergoing covalent changes. On the basis of these data, the structures of two putative catalytic intermediates were modelled into the active site. This new structural information and the modelling studies provide further insight into the mechanism of enzyme-catalyzed indole synthesis. The charged epsilon-amino group of Lys110 is the general acid, and the carboxylate group of Glu159 is the general base. Lys53 guides the substrate undergoing conformational transitions during catalysis, by forming a salt-bridge to the carboxylate group of its anthranilate moiety.     

A thermostable phosphotriesterase from the archaeon Sulfolobus solfataricus: cloning, overexpression and properties

A new gene from the hyperthermophilic archaeon Sulfolobus solfataricus MT4, coding for a putative protein reported to show sequence identity with the phosphotriesterase-related protein family (PHP), was cloned by means of the polymerase chain reaction from the S. solfataricus genomic DNA. In order to analyse the biochemical properties of the protein an overexpression system in Escherichia coli was established. The recombinant protein, expressed in soluble form at 5 mg/l of E. coli culture, was purified to homogeneity and characterized. In contrast with its mesophilic E. coli counterpart that was devoid of any tested activity, the S. solfataricus enzyme was demonstrated to have a low paraoxonase activity. This activity was dependent from metal cations with Co²⁺, Mg²⁺ and Ni²⁺ being the most effective and was thermophilic and thermostable. The enzyme was inactivated with EDTA and o-phenantroline. A reported inhibitor for Pseudomonas putida phosphotriesterase (PTE) had no effect on the S. solfataricus paraoxonase. The importance of a stable paraoxonase for detoxification of chemical warfare agents and agricultural pesticides will be discussed.     

Crystal structure and biochemical properties of the D-arabinose dehydrogenase from Sulfolobus solfataricus

Sulfolobus solfataricus metabolizes the five-carbon sugar d-arabinose to 2-oxoglutarate by an inducible pathway consisting of dehydrogenases and dehydratases. Here we report the crystal structure and biochemical properties of the first enzyme of this pathway: the d-arabinose dehydrogenase. The AraDH structure was solved to a resolution of 1.80 A by single-wavelength anomalous diffraction and phased using the two endogenous zinc ions per subunit. The structure revealed a catalytic and cofactor binding domain, typically present in mesophilic and thermophilic alcohol dehydrogenases. Cofactor modeling showed the presence of a phosphate binding pocket sequence motif (SRS-X2-H), which is likely to be responsible for the enzyme's preference for NADP+. The homo-tetrameric enzyme is specific for d-arabinose, l-fucose, l-galactose and d-ribose, which could be explained by the hydrogen bonding patterns of the C3 and C4 hydroxyl groups observed in substrate docking simulations. The enzyme optimally converts sugars at pH 8.2 and 91 degrees C, and displays a half-life of 42 and 26 min at 85 and 90 degrees C, respectively, indicating that the enzyme is thermostable at physiological operating temperatures of 80 degrees C. The structure represents the first crystal structure of an NADP+-dependent member of the medium-chain dehydrogenase/reductase (MDR) superfamily from Archaea.     

Structure of the RACK1 dimer from Saccharomyces cerevisiae

Receptor for activated C-kinase 1 (RACK1) serves as a scaffolding protein in numerous signaling pathways involving kinases and membrane-bound receptors from different cellular compartments. It exists simultaneously as a cytosolic free form and as a ribosome-bound protein. As part of the 40S ribosomal subunit, it triggers translational regulation by establishing a direct link between protein kinase C and the protein synthesis machinery. It has been suggested that RACK1 could recruit other signaling molecules onto the ribosome, providing a signal-specific modulation of the translational process. RACK1 is able to dimerize both in vitro and in vivo. This homodimer formation has been observed in several processes including the regulation of the N-methyl-d-aspartate receptor by the Fyn kinase in the brain and the oxygen-independent degradation of hypoxia-inducible factor 1. The functional relevance of this dimerization is, however, still unclear and the question of a possible dimerization of the ribosome-bound protein is still pending. Here, we report the first structure of a RACK1 homodimer, as determined from two independent crystal forms of the Saccharomyces cerevisiae RACK1 protein (also known as Asc1p) at 2.9 and 3.9 Å resolution. The structure reveals an atypical mode of dimerization where monomers intertwine on blade 4, thus exposing a novel surface of the protein to potential interacting partners. We discuss the significance of the dimer structure for RACK1 function.     

Structural basis of the destabilization produced by an amino-terminal tag in the beta-glycosidase from the hyperthermophilic archeon Sulfolobus solfataricus

We have previously shown that the major ion-pairs network of the tetrameric beta-glycosidase from the hyperthermophilic archeon Sulfolobus solfataricus involves more than 16 ion-pairs and hydrogen bonds between several residues from the four subunits and protects the protein from thermal unfolding by sewing the carboxy-termini of the enzyme. We show here that the amino-terminal of the enzyme also plays a relevant role in the thermostabilization of the protein. In fact, the addition of four extra amino acids at the amino-terminal of the beta-glycosidase, though not affecting the catalytic machinery of the enzyme and its thermophilicity, produced a faster enzyme inactivation in the temperature range 85-95 degrees C and decreased the Tm of the protein of 6 degrees C, measured by infrared spectroscopy. In addition, detailed two-dimensional IR correlation analysis revealed that the quaternary structure of the tagged enzyme is destabilized at 85 degrees C whilst that of the wild type enzyme is stable up to 98 degrees C. Molecular models allowed the rationalization of the experimental data indicating that the longer amino-terminal tail may destabilize the beta-glycosidase by enhancing the molecular fraying of the polypeptide and loosening the dimeric interfaces. The data support the hypothesis that fraying of the polypeptide chain termini is a relevant event in protein unfolding.     

Insertion of dNTPs opposite the 1,N2-propanodeoxyguanosine adduct by Sulfolobus solfataricus P2 DNA polymerase IV

1, N (2)-Propanodeoxyguanosine (PdG) is a stable structural analogue for the 3-(2'-deoxy-beta- d- erythro-pentofuranosyl)pyrimido[1,2-alpha]purin-10(3 H)-one (M 1dG) adduct derived from exposure of DNA to base propenals and to malondialdehyde. The structures of ternary polymerase-DNA-dNTP complexes for three template-primer DNA sequences were determined, with the Y-family Sulfolobus solfataricus DNA polymerase IV (Dpo4), at resolutions between 2.4 and 2.7 A. Three template 18-mer-primer 13-mer sequences, 5'-d(TCACXAAATCCTTCCCCC)-3'.5'-d(GGGGGAAGGATTT)-3' (template I), 5'-d(TCACXGAATCCTTCCCCC)-3'.5'-d(GGGGGAAGGATTC)-3' (template II), and 5'-d(TCATXGAATCCTTCCCCC)-3'.5'-d(GGGGGAAGGATTC)-3' (template III), where X is PdG, were analyzed. With templates I and II, diffracting ternary complexes including dGTP were obtained. The dGTP did not pair with PdG, but instead with the 5'-neighboring template dC, utilizing Watson-Crick geometry. Replication bypass experiments with the template-primer 5'-TCACXAAATCCTTACGAGCATCGCCCCC-3'.5'-GGGGGCGATGCTCGTAAGGATTT-3', where X is PdG, which includes PdG in the 5'-CXA-3' template sequence as in template I, showed that the Dpo4 polymerase inserted dGTP and dATP when challenged by the PdG adduct. For template III, in which the template sequence was 5'-TXG-3', a diffracting ternary complex including dATP was obtained. The dATP did not pair with PdG, but instead with the 5'-neighboring T, utilizing Watson-Crick geometry. Thus, all three ternary complexes were of the "type II" structure described for ternary complexes with native DNA [Ling, H., Boudsocq, F., Woodgate, R., and Yang, W. (2001) Cell 107, 91-102]. The PdG adduct remained in the anti conformation about the glycosyl bond in each of these threee ternary complexes. These results provide insight into how -1 frameshift mutations might be generated for the PdG adduct, a structural model for the exocylic M 1dG adduct formed by malondialdehyde.     

Oligomeric and functional properties of a debranching enzyme (TreX) from the archaeon Sulfolobus solfataricus P2

A gene, treX, encoding a debranching enzyme previously cloned from the trehalose biosynthesis gene cluster of Sulfolobus solfataricus P2 was expressed in Escherichia coli as a His-tagged protein and the biochemical properties were studied. The specific activity of the S. solfataricus debranching enzyme (TreX) was highest at 75°C and pH 5.5. The enzyme exhibited hydrolysing activity toward α-1,6-glycosidic linkages of amylopectin, glycogen, pullulan, and other branched substrates, and glycogen was the preferred substrate. TreX has a high specificity for hydrolysis of maltohexaosyl α-1,6-β-cyclodextrin, indicating the high preference for side chains consisting of 6 glucose residues or more. The enzyme also exhibited 4-α-sulfoxide-glucan transferase activity, catalysing transfer of α-1,4-glucan oligosaccharides from one chain to another. Dimethyl sulfoxide (10%, v/v) increased the hydrolytic activity of TreX. Gel permeation chromatography and sedimentation equilibrium analytical ultracentrifugation revealed that the enzyme exists mostly as a dimer at pH 7.0, and as a mixture of dimers and tetramers at pH 5.5. Interestingly, TreX existed as a tetramer in the presence of DMSO at pH 5.5–6.5. The tetramer showed a 4-fold higher catalytic efficiency than the dimer. The enzyme catalysed not only intermolecular trans-glycosylation of malto-oligosaccharides (disproportionation) to produce linear α-1,4-glucans, but also intramolecular trans-glycosylation of glycogen. The results presented in this study indicated that TreX may be associated with glycogen metabolism by selective cleavage of the outer side chain.     

Structural determinants of the high thermal stability of SsoPox from the hyperthermophilic archaeon Sulfolobus solfataricus

Organophosphates (OPs) constitute the largest class of insecticides used worldwide and certain of them are potent nerve agents. Consequently, enzymes degrading OPs are of paramount interest, as they could be used as bioscavengers and biodecontaminants. Looking for a stable OPs catalyst, able to support industrial process constraints, a hyperthermophilic phosphotriesterase (PTE) (SsoPox) was isolated from the archaeon Sulfolobus solfataricus and was found to be highly thermostable. The solved 3D structure revealed that SsoPox is a noncovalent dimer, with lactonase activity against “quorum sensing signals”, and therefore could represent also a potential weapon against certain pathogens. The structural basis of the high thermostability of SsoPox has been investigated by performing a careful comparison between its structure and that of two mesophilic PTEs from Pseudomonas diminuta and Agrobacterium radiobacter. In addition, the conformational stability of SsoPox against the denaturing action of temperature and GuHCl has been determined by means of circular dichroism and fluorescence measurements. The data suggest that the two fundamental differences between SsoPox and the mesophilic counterparts are: (a) a larger number of surface salt bridges, also involved in complex networks; (b) a tighter quaternary structure due to an optimization of the interactions at the interface between the two monomers. Pompea Del Vecchio, Mikael Elias and Luigia Merone were contributed equally to this paper.     

Isolation, characterization and microsequence analysis of a small basic methylated DNA-binding protein from the Archaebacterium, Sulfolobus solfataricus

DNA-binding proteins have been extracted from the thermoacidophilic archaebacterium Sulfolobus solfataricus strain P1, grown at 86 degrees C and pH 4.5. These proteins, which may have a histone-like function, were isolated and purified under standard, non-denaturing conditions, and can be grouped into three molecular mass classes of 7, 8 and 10 kDa. We have purified to homogenity the main 7 kDa protein and determined its DNA-binding affinity by filter binding assays and electron microscopy. The Stokes radius of gyration indicates that the protein occurs as a monomer. The complete amino-acid sequence of this protein contains 14 lysine residues out of 63 amino acids and the calculated Mr is 7149. Five of the lysine residues are partially monomethylated to varying extents and the methylated residues are located exclusively in the N-terminal (positions 4 and 6) and the C-terminal (positions 60, 62 and 63) regions only. The protein is strongly homologous to the 7 kDa proteins of Sulfolobus acidocaldarius with the highest homology to protein 7d. Accordingly, the name of this protein from S. solfataricus was assigned as DNA-binding protein Sso7d.     

Gene content and organization of a 281-kbp contig from the genome of the extremely thermophilic archaeon, Sulfolobus solfataricus P2.

The sequence of a 281-kbp contig from the crenarchaeote Sulfolobus solfataricus P2 was determined and analysed. Notable features in this region include 29 ribosomal protein genes, 12 tRNA genes (four of which contain archaeal-type introns), operons encoding enzymes of histidine biosynthesis, pyrimidine biosynthesis, and arginine biosynthesis, an ATPase operon, numerous genes for enzymes of lipopolysaccharide biosynthesis, and six insertion sequences. The content and organization of this contig are compared with sequences from crenarchaeotes, euryarchaeotes, bacteria, and eukaryotes.     

Expression, Isolation, and Crystallization of the Catalytic Domain of CopB, a Putative Copper Transporting ATPase from the Thermoacidophilic Archaeon Sulfolobus solfataricus

The P-type CPX-ATPases are responsible for the transport of heavy metal ions in archaea, bacteria, and eukaryotes. We have chosen one of the two CPX-ATPases of the thermophile Sulfolobus solfataricus, CopB (= SSO2896) for the investigation of the molecular mechanism of this integral membrane protein. We recombinately expressed three different soluble domains of this protein (named CopB-A, CopB-B, and CopB-C) in Escherichia coli and purified them to homogeneity. 3D crystals of CopB-B, the 29 kDa catalytic ATP binding/phosphorylation domain were produced, which diffracted to a resolution of 2.2 A. CopB-B has heavy metal stimulated phosphatase activity, which was half maximal in the presence of 80 microM Cu2+. The protein forms a phosphorylated intermediate with the substrate gamma-(32P)-ATP. No specific activation of the polypeptide was observed, when CopB-B phosphatase activity was tested in the presence of the purified CopB-C and CopB-A proteins, which provide the cation binding and the phosphatase domains. We conclude that CopB is a putatively copper translocating ATPase, in which structural elements integrally located in the membrane are required for full, coordinated activation of the catalytic ATP binding domain.     

Characterization of the C-terminal half of human juvenile myoclonic epilepsy protein EFHC1: dimer formation blocks Ca2+ and Mg2+ binding to its functional EF-hand

Human EFHC1 is a member of the EF-hand superfamily of Ca²⁺-binding proteins with three DM10 domains of unclear function. Point mutations in the EFHC1 gene are related to juvenile myoclonic epilepsy, a fairly common idiopathic generalized epilepsy. Here, we report the first structural and thermodynamic analyses of the EFHC1C-terminus (residues 403-640; named EFHC1C), comprising the last DM10 domain and the EF-hand motif. Circular dichroism spectroscopy revealed that the secondary structure of EFHC1C is composed by 34% of α-helices and 17% of β-strands. Size exclusion chromatography and mass spectrometry showed that under oxidizing condition EFHC1C dimerizes through the formation of disulfide bond. Tandem mass spectrometry (MS/MS) analysis of peptides generated by trypsin digestion suggests that the Cys575 is involved in intermolecular S-S bond. In addition, DTNB assay showed that each reduced EFHC1C molecule has one accessible free thiol. Isothermal titration calorimetry (ITC) showed that while the interaction between Ca²⁺ and EFHC1C is enthalpically driven (ΔH = −58.6 to −67 kJ/mol and TΔS = −22.5 to −31 kJ/mol) the interaction between Mg²⁺ and EFHC1C involves an entropic gain, and is ∼5 times less enthalpically favorable (ΔH = −11.7 to −14 kJ/mol and TΔS = 21.9 to 19 kJ/mol) than for Ca²⁺ binding. It was also found that under reducing condition Ca²⁺ or Mg²⁺ ions bind to EFHC1C in a 1/1 molar ratio, while under oxidizing condition this ratio is reduced, showing that EFHC1C dimerization blocks Ca²⁺ and Mg²⁺ binding.