Influence of multiple cysteines on human 3-hydroxy-3-methylglutaryl-CoA lyase activity and formation of inter-subunit adducts

Human 3-hydroxy-3-methylglutaryl-CoA lyase catalyzes formation of acetyl-CoA and acetoacetate in a reaction that requires divalent cation and is stimulated by sulfhydryl protective reagents. The enzyme is a homodimer and inter-subunit adducts form in the absence of reducing agents or upon treatment with cysteine selective crosslinking agents. To address the influence of cysteines on enzyme activity and formation of inter-subunit and intra-subunit adducts, single serine substitutions have been engineered for each enzyme cysteine. Enzyme activity varies for each cysteine→serine mutant protein and different mutations have widely different effects on recovery of activity upon DTT treatment of non-reduced enzyme. These levels of enzyme activity do not strongly correlate with formation of inter-subunit adducts by these HMGCL mutants. C170S, C266S, and C323S proteins do not form inter-subunit disulfide adducts but such an adduct is restored in the C170S/C174S double mutant. Coexpression of HMGCL proteins encoded by C266S and C323S expression plasmids supports formation of a C266S/C323S heterodimer which does form a covalent inter-subunit adduct. These observations are interpreted in the context of competition between cysteines in formation of intra-subunit and inter-subunit heterodisulfide adducts.     

Cysteine-22 and cysteine-38 are not essential for the functions of maltoporin (LamB protein)

Maltoporin in the outer membrane of Escherichia coli contains two cysteine residues, at positions 22 and 38 in the primary sequence. The role of these residues in determining structural stability, and their contributions to the maltoporin binding sites for maltodextrins and bacteriophage lambda, was investigated. Site-directed mutagenesis was used to alter each of these residues to a serine. A double mutant lacking both cysteines was also isolated. None of the substitutions affected maltodextrin binding or the binding of phage lambda, suggesting the variant proteins retain a native binding-site conformation. The mutants were assembled at wild-type levels into the outer membrane as maltoporin trimers but the temperature-stability of the trimer greater than monomer dissociation was slightly reduced in the presence of the Cys 38 substitution. However, it is unlikely that the stability of trimers was due to disulfide linkages between subunits since the native trimers are stable under highly reducing conditions in the presence of SDS; more likely the Cys greater than Ser substitutions slightly perturb intra- or inter-subunit hydrophobic interactions in regions predicted to span across the outer membrane.     

The region between transmembrane domains 1 and 2 of the reduced folate carrier forms part of the substrate-binding pocket

A functional cysteine-less form of the hamster reduced folate carrier protein was generated by alanine replacement of the 14 cysteine residues. The predicted 12-transmembrane topology was examined by replacing selected amino acids, predicted to be exposed to the extracellular or cytosolic environments, with cysteines. The location of these cysteines was defined by their accessibility to biotin maleimide in the presence or absence of specific blocking agents. Amino acids predicted to be exposed to the extracellular environment (S46C, S179C, L300C, Y355C, and K430C) could be labeled with biotin maleimide; this modification could be blocked by prior treatment with nonpermeable reagents. Amino acids predicted to be within the cytosol (S152C, Cys224, and L475C) could be labeled only after streptolysin O permeabilization. In addition, the cysteine-less reduced folate carrier was exploited to evaluate a potential substrate-binding domain as suggested by previous studies. Nineteen cysteine replacements were generated between residues 39 and 75, a region located between the first and second transmembrane segments. From the biotinylation of these sites and the ability of various reagents to block this labeling, it appears that L41C, E45C, S46C, T49C, I66C, and L70C are exposed to the extracellular environment, whereas Q54C, Q61C, and T63C are slightly less accessible. Cysteines 39, 42, 44, 47, 51, and 73 were inefficiently biotinylated, suggesting that these sites are located in the membrane or within a tightly folded domain of the protein. Furthermore, biotinylation of cysteines 41, 46, 49, 70, and 71 could be prevented by prior treatment with either methotrexate or folinic acid, indicating that these sites form part of a substrate-binding pocket.     

Maltose transport and starch binding in phage-resistant point mutants of maltoporin. Functional and topological implications

The relationships between the bacteriophage lambda binding site, the starch binding site and the pore formed by maltoporin (LamB protein, lambda receptor protein) were investigated. Bacteria with single amino acid substitutions in the maltoporin sequence, which were previously shown to be strongly reduced in phage lambda sensitivity, were assayed for maltose- (and maltodextrin) selective pore functions. Maltose transport assays was performed at low substrate concentrations, under conditions where LamB is limiting for transport. It revealed three classes of mutants. Class A is composed of mutants with no effect on transport (substitutions at amino acid residues 154, 155, 259, 382 and 401); class B corresponds to mutants with a significant but variable reduction in transport (sites 148, 151, 152, 163, 164, 245, 247 and 250); class C is represented by a single mutant for which transport is almost completely abolished (site 18). Starch binding was assayed by two different methods that gave compatible results. In class A mutants, binding was normal, while no binding was observed in the class C mutant. Binding was impaired to various extents in category B mutants. There was a correlation between the level of impairment of starch binding and impairment of maltose transport, consistent with the notion that the residues influencing starch binding are inside, or in close proximity to, the pore. These results, together with previous data on starch-binding mutants that were not affected in phage binding (substitutions at residues 8, 74, 82, 118 and 121), suggest that the binding sites for starch and phage lambda overlap but are distinct. Mutations affecting transport and starch binding are located in the first third of the protein and in the region of residues 245 to 250. Mutations affecting phage adsorption are located mainly in the last two-thirds of the protein. The topological constraints suggested by the results with the available mutants altered in the lamB gene were used to propose a revised model of maltoporin folding across the outer membrane as well as to define the outlines of footprints of macromolecular binding sites (phage, starch and monoclonal antibodies) on the surface of the protein.     

Pyrococcus furiosus alpha-amylase is stabilized by calcium and zinc

The hyperthermophilic archeon Pyrococcus furiosus produces an extracellular alpha-amylase that belongs to glycosyl hydrolases' family 13. This enzyme is more thermostable than its bacterial and archaeal homologues (e.g., Bacillus licheniformis TAKA-term and Pyrococcus kodakaraensis KOD1 alpha-amylases, respectively) even without adding Ca(2+) ions. Unlike the TAKA-therm amylase that contains no cysteine, the P. furiosus enzyme contains five cysteines (C152, C153, C165, C387, and C430), only four of which (C152, C153, C387, and C430) are conserved in the P. kodakaraensis alpha-amylase. To test the potential function of cysteines in P. furiosus alpha-amylase stability, these five residues were substituted with Ser or Ala-either one-by-one or in sequence-to produce eight mutant enzymes. Mutation C165S dramatically destabilized P. furiosus alpha-amylase. At the same time, the quadruple mutant enzyme C152S/C153S/C387S/C430A (mutant SSCSA) was as thermostable as the wild-type enzyme. Mutant SSCSA and wild-type alpha-amylases were strongly destabilized by dithiothreitol and ethylenediaminetetraacetic acid, suggesting that metal binding can be involved in this enzyme's thermostability. Inductively coupled plasma-atomic emission spectrometry showed the presence of Ca(2+) and Zn(2+) metal ions in P. furiosus alpha-amylase. Although Ca(2+) is known to contribute to alpha-amylase's stability, the absence of two out of the three conserved Ca(2+) ligands in the P. furiosus enzyme suggests that a different set of amino acids is involved in this enzyme's Ca(2+) binding. We also provide evidence suggesting that Cys165 is involved in Zn(2+) binding and that Cys165 is essential for the stability of P. furiosus alpha-amylase at very high temperatures.     

Dissociation of the DNA polymerase III holoenzyme beta 2 subunits is accompanied by conformational change at distal cysteines 333

The beta subunit of DNA polymerase III holoenzyme is in a dimer-monomer equilibrium at physiological beta concentrations. Dissociation is accompanied by the fluorescence enhancement of a fluorophore attached to a unique sulfhydryl group of beta (Griep, M. A., and McHenry, C. S. (1988) Biochemistry 27, 5210-5215). Sequencing of the isolated tryptic peptides of beta revealed that the fluorescent maleimide group was attached to cysteine 333. The 2 residues, lysine 332 and glutamate 334, that flank this residue are hydrophilic and may place cysteine 333 on the surface of beta, explaining its high reactivity. Fluorescence energy transfer permitted us to locate the uniquely labeled cysteines 333 of beta at the distal ends of the beta dimer. When the beta dimer was dissociated to monomers, the accompanying alteration of the conformational state was reported by the fluorescein-5-maleimide (fluorescein)-labeled cysteines which were located far from the dimer interface. The carboxyl of fluorescein had a fluorescence pKa of 6.9 when beta was in its dimeric state. The pKa decreased by 0.3 pH unit upon dissociation to monomers and resulted in the fluorescence enhancement that was observed when the signal was monitored at constant pH. The adjacent glutamate 334 apparently increased the pKa of the attached fluorescein when beta was in its dimeric state. Movement of either the adjacent lysine 332 amino side chain to a closer position or glutamate 334 to a position further away could lower the pKa upon beta monomerization. Thus, beta undergoes a conformational change concomitant with dimer dissociation that was transmitted to the opposite ends of the beta dimer. The pKa of fluorescein attached to the distal cysteines was shifted, leading to greater ionization and enhanced fluorescence.     

Stalk segment 5 of the yeast plasma membrane H(+)-ATPase. Labeling with a fluorescent maleimide reveals a conformational change during glucose activation

Glucose is well known to cause a rapid, reversible activation of the yeast plasma membrane H(+)-ATPase, very likely mediated by phosphorylation of two or more Ser/Thr residues near the C terminus. Recent mutagenesis studies have shown that glucose-dependent activation can be mimicked constitutively by amino acid substitutions in stalk segment 5 (S5), an alpha-helical stretch connecting the catalytic part of the ATPase with transmembrane segment 5 (Miranda, M., Allen, K. E., Pardo, J. P., and Slayman, C. W. (2001) J. Biol. Chem. 276, 22485-22490). In the present work, the fluorescent maleimide Alexa-488 has served as a probe for glucose-dependent changes in the conformation of S5. Experiments were carried out in a "3C" version of the ATPase, from which six of nine native cysteines had been removed by site-directed mutagenesis to eliminate background labeling by Alexa-488. In this construct, three of twelve cysteines introduced at various positions along S5 (A668C, S672C, and D676C) reacted with the Alexa dye in a glucose-independent manner, as shown by fluorescent labeling of the 100 kDa Pma1 polypeptide and by isolation and identification of the corresponding tryptic peptides. Especially significant was the fact that three additional cysteines reacted with Alexa-488 more rapidly (Y689C) or only (V665C and L678C) in plasma membranes from glucose-metabolizing cells. The results support a model in which the S5 alpha-helix undergoes a significant change in conformation to expose positions 665, 678, and 689 during glucose-dependent activation of the ATPase.     

Fluorescence probing of the function-specific cysteines of rat microsomal NADPH-cytochrome P-450 reductase

Titration of NADPH-cytochrome P-450 reductase with a fluorigenic maleimide suggests that approximately four cysteines are initially accessible and in close proximity to four tryptophans. Perturbation of the cysteines and/or tryptophans results in concomitant decreases in enzymic activity. These cysteines were correlated with functional components by binding studies and subsequent tryptic peptide mapping on the acid mobile phase-reverse phase HPLC. Adenine nucleotides and cytochrome c block labelling of the more hydrophilic peptides, while detergents facilitate labelling of the more hydrophobic peptides. The more hydrophobic peptides contain the microsomal binding site of cytochrome P-450. Removal of the prosthetic flavins exposes more cysteines in the more hydrophilic and hydrophobic regions of the peptide map, associating the former with FAD and the latter with FMN binding sites.     

Troponin-C-mediated calcium-sensitive changes in the conformation of troponin I detected by pyrene excimer fluorescence

Troponin I (TnI) from rabbit white skeletal muscle was labeled at cysteines 48 and 64 with the fluorescent reagent N-(1-pyrene)maleimide. The fluorescence spectra of pyrene-labeled TnI (pyr-TnI) exhibit peaks characteristic of pyrene in its monomeric form and an additional peak resulting from formation of excited dimers (excimers), indicating that the labeled cysteines are close together. Formation of a pyr-TnI-TnC complex in the absence of Ca2+ has little effect on the spectrum, but when Ca2+ is bound to the low-affinity sites of TnC there is a substantial decrease in excimer and a corresponding increase in monomer fluorescence. The involvement of the low-affinity sites in the Ca2+-induced effect is consistent with the fact that Mg2+ has no effect on pyrene fluorescence. On rapid mixing of the pyr-TnI-TnC complex with Ca2+ in a stopped-flow apparatus, most of the excimer decrease is complete within the instrumental dead time, indicating a rate constant k greater than 350 s-1, which is comparable to that of the conformational change in TnC resulting from Ca2+ binding to the low-affinity sites. Rapid mixing of the Mg2-TnC-pyr-TnI complex with Ca2+ yields similar results, suggesting that the type of metal ion present at the high-affinity sites has little, if any, effect on the probe. It has been suggested previously that Cys 48 and 64 are located in a TnT-binding region of TnI (Chong P.C.S. and Hodges, R.S. (1982) J. Biol. Chem. 255, 3757). Our results suggest that a Ca2+-induced structural change in the TnI-binding region of TnC could be transmitted to TnT by affecting the TnT-binding region of TnI as part of the chain of events in the regulation of muscle contraction.     

Differences in the chemical and catalytic characteristics of two crystallographically ''identical'' enzyme catalytic sites. Characterization of actinidin and papain by a combination of pH-dependent substrate catalysis kinetics and reactivity probe studies targeted on the catalytic-site thiol group and its immediate microenvironment.

The characteristics of actinidin (EC 3.4.22.14) and papain (EC 3.4.22.2), two cysteine proteinases whose catalytic-site regions appear to superimpose to a degree that approaches atomic co-ordinate accuracy of both crystal structures, were evaluated by determining (a) the pH-dependence in acid media of the acylation process of the catalytic act (k+2/Ks) using N alpha-benzoyl-L-arginine p-nitroanilide (L-Bz-Arg-Nan) as substrate and (b) the sensitivity of the reactivity of the catalytic-site thiol group and its pH-dependence to structural change in small, thiol-specific, two-protonic-state reactivity probes (2,2'-dipyridyl disulphide and methyl 2-pyridyl disulphide) where enzyme-probe contacts should be restricted to areas close to the catalytic site. Distortion of the catalytic sites of the two enzymes at pH less than 4 was evaluated over time-scales appropriate for both stopped-flow reactivity probe kinetics (less than or equal to 1-2 s) and steady-state substrate catalysis kinetics (3-5 min) by using the 2,2'-dipyridyl disulphide monocation as a titrant for non-distorted catalytic sites. This permitted a lower pH limit to be defined for valid kinetic analysis of both types. The behaviour of the enzymes at pH less than 4 requires a kinetic model in which the apparently biomolecular reaction of enzyme with probe reagent is separated from the process leading to loss of conformational integrity by a potentially reversible step. The acylation of actinidin with L-Bz-Arg-Nan in acidic media occurs in two protonic states, one produced by raising the pH across pKa less than 4 which probably characterizes the formation of -S-/-ImH+ ion pair (pKa approx. 3) and the other, of higher reactivity, produced by raising the pH across pKa 5.5, which may characterize rearrangement of catalytic-site geometry. The pH-dependence of the acylation of papain by L-Bz-Arg-Nan is quite different and is not influenced by protonic dissociation with pKa values in the range 5-6. The earlier conclusion that the acylation of papain depends on two protonic dissociations each with pKa approx. 4 was confirmed. This argument is now more firmly based because titration with 2,2'-dipyridyl disulphide permits the loss of conformational integrity to be taken into account in the analysis of the kinetic data at very low pH. Methyl 2-pyridyl disulphide was synthesized by reaction of pyridine-2-thione with methyl methanethiolsulphonate and its pKa at I = 0.1 was determined by spectral analysis at 307 nm to be 2.8.(ABSTRACT TRUNCATED AT 400 WORDS)     

Proteomic analysis of the oxidation of cysteine residues in human age-related nuclear cataract lenses

Loss of protein thiols is a key feature associated with the onset of age-related nuclear cataract (ARNC), however, little is known about the specific sites of oxidation of the crystallins. We investigated cysteine residues in ARNC lenses and compared them with age-matched normal lenses. Proteomic analysis of tryptic digests revealed ten cysteine residues in older normal lenses that showed no significant oxidation compared to foetal counterparts (Cys 170 in betaA1/3-crystallin, Cys 32 in betaA4-crystallin, Cys 79 in betaB1-crystallin, Cys 22, Cys 78/79, C153 in gammaC-crystallin and Cys 22, Cys 24 and Cys 26 in gammaS-crystallin). Although these thiols were not oxidised in normal lenses past the 6th decade, they were present largely as disulphides in the ARNC lenses. By contrast, two cysteine residues, Cys 41 in gammaC-crystallin and Cys 18 in gammaD-crystallin, were not oxidised, even in advanced ARNC lenses. These cysteines are buried deep within the protein and any unfolding associated with cataract must be insufficient to expose them to the oxidative environment present in the centre of advanced ARNC lenses. The vast majority of the loss of protein thiol observed in such lenses is due to disulphide bond formation.     

Channel architecture in maltoporin: dominance studies with lamB mutations influencing maltodextrin binding provide evidence for independent selectivity filters in each subunit.

Maltoporin trimers constitute maltodextrin-selective channels in the outer membrane of Escherichia coli. To study the organization of the maltodextrin-binding site within trimers, dominance studies were undertaken with maltoporin variants of altered binding affinity. It has been established that amino acid substitutions at three dispersed regions of the maltoporin sequence (at residues 8, 82, and 360) resulted specifically in maltodextrin-binding defects and loss of maltodextrin channel selectivity; a substitution at residue 118 increased both binding affinity and maltodextrin transport. Strains heterodiploid for lamB were constructed in which these substitutions were encoded by chromosomal and plasmid-borne genes, and the relative level of maltoporin expression from these genes was estimated. Binding assays with bacteria forming maltoporin heterotrimers were performed in order to test for complementation between binding-negative alleles, negative dominance of negative over wild-type alleles, and possible dominance of negatives over the high-affinity allele. Double mutants with mutations affecting residues 8 and 118, 82 and 118, and 118 and 360 were constructed in vitro, and the dominance properties of the mutations in cis were also tested. There was no complementation between negatives and no negative dominance in heterotrimers. The high-affinity mutation was dominant over negatives in trans but not in cis. The affinity of binding sites in heterotrimer populations was characteristic of the high-affinity allele present and uninfluenced by the negative allele. These results are consistent with the presence of three discrete binding sites in a maltoporin trimer and suggest that the selectivity filter for maltodextrins is not at the interface between the three subunits.     

A pyrene maleimide with a flexible linker for sampling of longer inter-thiol distances by excimer formation

Pyrene-containing compounds are commonly used in a number of fluorescence-based applications because they can form excited-state dimers (excimers) by stacking interaction between excited-state and ground-state monomers. Their usefulness arises from the facts that excimer formation requires close proximity between the pyrenes and that the excimer emission spectrum is very different from that of the monomers. One of many applications is to assess proximity between specific sites of macromolecules labeled with pyrenes. This has been done using pyrene maleimide, a reagent that reacts with reduced thiols of cysteines, but its use for structural studies of proteins has been rather limited. This is because the introduction of two cysteines at sufficiently close distance from each other to obtain excimer fluorescence upon labeling with pyrene maleimide requires detailed knowledge of the protein structure or extensive site-directed mutagenesis trials. We synthesized and tested a new compound with a 4-carbon methylene linker placed between the maleimide and the pyrene (pyrene-4-maleimide), with the aim of increasing the sampling distance for excimer formation and making the use of excimer fluorescence simpler and more widespread. We tested the new compound on thiol-modified oligonucleotides and showed that it can detect proximity between thiols beyond the reach of pyrene maleimide. Based on its spectroscopic and chemical properties, we suggest that pyrene-4-maleimide is an excellent probe to assess proximities between cysteines in proteins and thiols in other macromolecules, as well as to follow conformational changes.     

Structural roles of subunit cysteines in the folding and assembly of the DNA packaging machine (portal) of bacteriophage P22

The DNA packaging machine (portal assembly) of bacteriophage P22 is constructed from 12 copies of a multidomain 725-residue subunit comprising a complex alpha/beta fold. The portal subunit contains four cysteines (Cys 153, Cys 173, Cys 283, and Cys 516), which produce distinctive Raman markers in the spectral interval 2500-2600 cm(-1) originating from S-H bond-stretching vibrations diagnostic of S-H...X hydrogen-bonding interactions. The Raman spectrum is unique in the capability to characterize cysteine sulfhydryl interactions in proteins and shows that portal cysteine environments are significantly altered by assembly (Rodriguez-Casado et al. (2001) Biochemistry 40, 13583-13591). We have employed site-directed mutagenesis, size-exclusion chromatography, and Raman difference spectroscopy to characterize the roles of portal cysteines in subunit folding and dodecamer assembly. The stability of the portal monomer is severely reduced by a Cys --> Ser point mutation introduced at either residue 173 or 516. In the case of C516S, the destabilized monomer still forms portal rings, as visualized by negative-stain electron microscopy, whereas portal ring formation cannot be detected for C173S, which forms aberrant aggregates. The C283S mutant is a hyperstable monomer that is defective in portal ring formation. Interestingly, Cys 283 is suggested by secondary structure homology with the phi29 portal to be within a domain involved in DNA translocation. Conversely, the phenotype of the C153S mutant is close to that of the wild-type protein, implying that the sulfhydryl moiety of Cys 153 is not essential to formation of the native subunit fold and productive assembly dynamics. The present results demonstrate that cysteines of the P22 portal protein span a wide range of sulfhydryl hydrogen-bonding strengths in the wild-type assembly, that three of the four sulfhydryls play key roles in portal protein stability and assembly kinetics, and that substitution of a mutant seryl interaction (O-H...X) for a wild-type cysteinyl interaction (S-H...X) can either stabilize or destabilize the native fold depending upon sequence context.     

Chemical modification of lactose repressor protein using N-substituted maleimides.

Lactose repressor protein has been modified with N-ethylmaleimide, two N-maleimide spin labels, and an N-maleimide fluorophore. The reaction with repressor cysteine residues has been characterized. Approximately 2 of the 3 eq of cysteine/repressor monomer are reactive toward these reagents. Repressor cysteines are reactive toward these reagents in the order cysteine 140 greater than or equal to cysteine 107 greater than cysteine 281. The reaction is sulfhydryl-specific. Comparison of chemical modification data obtained in this laboratory using a variety of sulfhydryl-specific reagents has been used to assess chemical features of individual cysteine environments. Effects of the maleimide reagents on biological activity have been determined. Only the fluorophore N-(3-pyrene)maleimide has significant effect; this agent selectively perturbs repressor's ability to bind to operator DNA. This result suggests that regions of protein structure surrounding 1 or more of the cysteine residues possess determinants required for normal operator DNA binding.     

Two-dimensional crystals of Escherichia coli maltoporin and their interaction with the maltose-binding protein.

We have reconstituted Escherichia coli maltoporin into phospholipid membranes at low lipid-to-protein ratios to produce two-dimensional crystals of this membrane protein. Electron microscopy of negatively stained membranes showed three different types of arrays, two of them hexagonal and the third rectangular, all diffracting to approximately (2 nm)-1. Furthermore, we have core-constituted maltoporin with the maltose-binding protein from E. coli, a soluble periplasmic protein that has been proposed to interact with maltoporin. One of the hexagonal arrays was found to bind maltose-binding protein molecules in a regular way, while the maltose-binding protein binding sites were not accessible in the other crystal forms. Difference maps from averaged decorated arrays and undecorated controls showed three symmetry-related maltose-binding protein binding sites per maltoporin trimer, of which not more than one is likely to be occupied at a given time. Using multivariate statistical analysis to select similar unit cells of the decorated maltoporin array, we have obtained a map showing the rough outline of a maltose-binding protein molecule interacting with the pore formed by a maltoporin trimer.     

Tyrosine triad at the interface between the Rieske iron-sulfur protein, cytochrome c(1) and cytochrome c(2) in the bc(1) complex of Rhodobacter capsulatus

A triad of tyrosine residues (Y152-154) in the cytochrome c(1) subunit (C1) of the Rhodobacter capsulatus cytochrome bc(1) complex (BC1) is ideally positioned to interact with cytochrome c(2) (C2). Mutational analysis of these three tyrosines showed that, of the three, Y154 is the most important, since its mutation to alanine resulted in significantly reduced levels, destabilization, and inactivation of BC1. A second-site revertant of this mutant that regained photosynthetic capacity was found to have acquired two further mutations-A181T and A200V. The Y152Q mutation did not change the spectral or electrochemical properties of C1, and showed wild-type enzymatic C2 reduction rates, indicating that this mutation did not introduce major structural changes in C1 nor affect overall activity. Mutations Y153Q and Y153A, on the other hand, clearly affect the redox properties of C1 (e.g. by lowering the midpoint potential as much as 117mV in Y153Q) and the activity by 90% and 50%, respectively. A more conservative Y153F mutant on the other hand, behaves similarly to wild-type. This underscores the importance of an aromatic residue at position Y153, presumably to maintain close packing with P184, which modeling indicates is likely to stabilize the sixth heme ligand conformation.     

Directing noble metal ion chemistry within a designed ferritin protein

Human H ferritin (HuHF) assembles from 24 four-helix bundles to form an approximately 500 kDa protein with an 8 nm internal cavity. HuHF provides a useful model for studying the transport of metal ions in solution to buried reaction sites in proteins. In this study, HuHF was redesigned to facilitate noble metal ion (Au(3+), Ag(+)) binding, reduction, and nanoparticle formation within the cavity. Computationally determined amino acid substitutions were targeted at four external and four internal surface sites. A variant with a total of 96 cysteines and histidines removed from the exterior surface and 96 non-native cysteines added to the interior surface retained wild-type stability and structure, as confirmed by X-ray crystallography, and promoted the formation of silver or gold nanoparticles within the protein cavity. Crystallographic studies with HuHF variants provide insight into how ferritins control access of metal ions to interior residues that perform chemistry.     

A de novo designed N-terminal disulphide bridge stabilizes the Trichoderma reesei endo-1,4-beta-xylanase II

We have successfully engineered a disulphide bridge into the N-terminal region of Trichoderma reesei endo-1,4-beta-xylanase II (XYNII) by substituting Thr-2 and Thr-28 with cysteine. The T2C:T28C mutational changes increased the half-life in thermal inactivation of this mesophilic enzyme from approximately 40 s to approximately 20 min at 65 degrees C, and from less than 10 s to approximately 6 min at 70 degrees C. Therefore, the N-terminal disulphide bridge enables the use of XYNII at substantially higher temperatures than permitted by its native mesophilic counterpart. Altogether, thermostability increased by about 15 degrees C. The kinetic properties of the mutant XYNII were maintained at the level of the wild type enzyme. Our findings demonstrated that a properly designed disulphide bridge, here within the N-terminal region of XYNII, can be very effective in resisting thermal inactivation.     

Conservative and nonconservative mutations of the transmembrane CPC motif in ZntA: effect on metal selectivity and activity

ZntA from Escherichia coli belongs to the P1B-ATPase transporter family and mediates resistance to toxic levels of selected divalent metal ions. P1B-type ATPases can be divided into subgroups based on substrate cation selectivity. ZntA has the highest selectivity for Pb2+, followed by Zn2+ and Cd2+; it also shows low levels of activity with Cu2+, Ni2+, and Co2+. It has two high-affinity metal-binding sites, one each in the N-terminus and the transmembrane domains. Ligands to the transmembrane metal site in ZntA include the cysteine residues of the conserved 392CPC394 motif in the sixth transmembrane helix. Pro393 is invariant in all P-type ATPases. For ZntA homologues with different metal ion selectivity, the cysteines are replaced by serine, histidine, and threonine. To test the effect on activity and metal ion selectivity, single alanine, histidine, and serine substitutions at Cys392 or Cys394 in ZntA were characterized, as well as double substitutions of both cysteines by histidine or serine. P393A was also characterized. C392A, C394A, and P393A lost the ability to bind a metal ion with high affinity in the transmembrane domain. Histidine and serine substitutions at Cys392 and Cys394 resulted in loss of binding of Pb2+ at the transmembrane site, indicating that both cysteines of the CPC motif are required for binding Pb2+ with high affinity in ZntA homologues. However, C392H, C392S, C394H, C394S, C392S/C394S, and C392H/C394H could bind other divalent metal ions at the transmembrane site and retained low but measurable activity. Interestingly, these mutants lost the predominant selectivity for Zn2+ and Cd2+ shown by wtZntA. Therefore, conserved residues contribute to metal selectivity by supplying ligands that bind metal ions not only with high affinity, as for Pb2+, but also with the most favorable binding geometry that results in efficient catalysis.