Experimental studies in human tooth wear. II

Studies of human tooth wear have been carried on for the past two years using a machine designed to approximate human chewing motions. During this time wear patterns that resemble those frequently found on the teeth of various American Indian skulls have been produced on casts of the definition. Noticeably among these patterns produced are examples of wear on the front end of the dental arches that result in an edge to edge bite. This type of wear was produced by wearing down casts of a modern dentition with a “normal” overbite. The forces applied to the casts mounted on the machine are variable over a wide range and numerous force combinations are possible. By noting these forces and the resulting vectors, the motions necessary to produce different wear patterns can be determined. This has especially aided in understanding the ways in which the oblique molar wear is produced.     

Form and patterning of anterior tooth wear among aboriginal human groups

Form and severity of dental attrition was assessed in aboriginal human groups including hunter-gatherers (Eskimos, Australians) and those with dependence to a varying degree on food production (Southwest U.S. and Ohio American Indians). Wear on anterior teeth was both relatively and absolutely greater in the hunter-gatherers, as indicated by comparisons of wear on anterior and posterior teeth which come into occlusion at roughly the same time. Distinct differences in form of anterior wear were also apparent: The hunter-gatherers exhibited steadily increasing incidences of labially rounded wear with greater functional age, while the food-producing groups showed little or no rounding but instead high frequencies of heavily cupped wear (especially in those with premature loss of posterior teeth). These differences were attributed to nonmasticatory utilization of the front teeth in hunter-gatherers and to employment of the anterior teeth in masticatory (grinding) activities necessitated by large-scale molar loss in food producers.     

Human tooth wear, tooth function and cultural variability

Among primitive peoples dental attrition appears to be a natural phenomenon. Often the degrees and kinds of tooth wear vary from population to population. This variability is possibly related to certain material aspects of culture such as diet, food preparation techniques and tool usage. In order to learn more about these relationships, extensive cross cultural comparisons must be made. This paper reports on a study of dental attrition among skeletal remains of North American Indians from three areas: California, the Southwest and the Valley of Mexico. A method of comparing worn teeth of these populations was devised so several characteristics of the teeth and supporting bone could be examined by population. This study showed significant differences in type and degree of wear among the three groups as well as differences between sexes within each population. A positive correlation between tooth wear and cultural factors was found. Dietary specialization and division of labor appear to be responsible for the degree and type of wear found in this sample. Further studies of this type are planned to expand the sample size and, if the new data support these correlations, valuable information about human–environmental relationships can be gained.     

Measurements of tooth wear among Australian Aborigines: I. Serial loss of the enamel crown

The dental casts made from Aboriginal children during the course of a longitudinal growth study in Central Australia provided material for analyzing tooth wear under known environmental conditions. The wear facets produced on the occlusal surfaces were clearly preserved on the dental stone casts and recorded the progress of enamel attrition from ages 6 to 18. These casts were photographed and traced by electronic planimetric methods that automatically recorded the location and size of wear facets on the first and second permanent molars. These areas of worn tooth surface were compared to the total tooth surface. The worn surface was regressed on age to calculate wear rates of each tooth. Discriminant analyses were also performed to determine the significance of dental attrition differences between the sexes at each age group. The total wear on each tooth was highly correlated with age as expected but females wore their teeth at a significantly higher rate than males. The mandibular molars wore more rapidly than maxillary teeth in both sexes. The discriminant analysis successfully grouped 91% of the cases according to age and sex. Pattern of wear, the location, and size of wear facets also differed between age groups and sex. The questions of why there is a difference between male and female wear or why there is greater wear on one arch or arch region have no ready answers. The differing rates and pattern of dental wear do suggest that arch shape and growth rates may be the answer though it has yet to be tested. However, the occlusal surface wear is useful for age estimation in a population and provides a record of shifting masticatory forces during growth.     

Phylogenetic signal in tooth wear dietary niche proxies

In the absence of independent observational data, ecologists and paleoecologists use proxies for the Eltonian niches of species (i.e., the resource or dietary axes of the niche). Some dietary proxies exploit the fact that mammalian teeth experience wear during mastication, due to both tooth‐on‐tooth and food‐on‐tooth interactions. The distribution and types of wear detectible at micro‐ and macroscales are highly correlated with the resource preferences of individuals and, in turn, species. Because methods that quantify the distribution of tooth wear (i.e., analytical tooth wear methods) do so by direct observation of facets and marks on the teeth of individual animals, dietary inferences derived from them are thought to be independent of the clade to which individuals belong. However, an assumption of clade or phylogenetic independence when making species‐level dietary inferences may be misleading if phylogenetic niche conservatism is widespread among mammals. Herein, we test for phylogenetic signal in data from numerous analytical tooth wear studies, incorporating macrowear (i.e., mesowear) and microwear (i.e., low‐magnification microwear and dental microwear texture analysis). Using two measures of phylogenetic signal, heritability (H²) and Pagel's λ, we find that analytical tooth wear data are not independent of phylogeny and failing to account for such nonindependence leads to overestimation of discriminability among species with different dietary preferences. We suggest that morphological traits inherited from ancestral clades (e.g., tooth shape) influence the ways in which the teeth wear during mastication and constrain the foods individuals of a species can effectively exploit. We do not suggest that tooth wear is simply phylogeny in disguise; the tooth wear of individuals and species likely varies within some range that is set by morphological constraints. We therefore recommend the use of phylogenetic comparative methods in studies of mammalian tooth wear, whenever possible.     

Brief communication: interproximal tooth wear: a new observation.

Microscopic observations were made of wear on the proximal surfaces of tooth crowns of Australian Aboriginals and whites. Typical wear facets displayed well-defined borders within which vertical or near vertical furrows, ranging from about 0.1 to 0.5 mm in width, were noted. Furrows on the interproximal surface of one tooth seemed to "interdigitate" with those on the proximal surface of the adjacent tooth. These observations are not consistent with the commonly-held view that interproximal tooth wear results from a buccolingual movement of adjacent teeth that maintain contact through mesial migration. Vertical or near vertical movement of teeth, possibly including a tipping action, must be an important factor, although the precise nature of the movement requires further investigation.     

儿童牙齿磨耗研究概述

牙齿磨耗是一个多因素、多阶段、复杂渐进的过程。其特征是牙齿硬组织逐渐消失,牙齿磨耗程度可以一定程度反映饮食结构和生活方式。国外很多学者探讨了年龄、性别、饮食结构、断奶、社会分工、社会经济地位等因素对儿童牙齿磨耗的影响,及乳齿恒齿磨耗差异、牙列磨耗模式特点、牙齿磨耗与错(牙合)畸形的关系等,而国内儿童牙齿磨耗研究相对薄弱。本文通过梳理和归纳相关文献,对儿童牙齿磨耗研究作简要概述,并对国内相关研究作简要回顾及展望。     

Dental arch shape and tooth wear variability

The rapid rate of tooth wear frequently reported among certain contemporary aboriginal populations has often been attributed to dietary form and abrasives. Several investigators have reported a close correlation between food bulk and the wear planes formed over the dental arches, i.e., steep oblique wear vs. flat horizontal planes. In this investigation we demonstrate that arch shape is an additional and a significant factor influencing the distribution of wear facets and exposed dentin over occlusal surfaces. We examined 64 dental stone casts of Aboriginals from Yuendumu, Central Australia, born between 1900 and 1940. These casts offer a record of the variety of tooth wear and arch forms and their interrelationships. This group of individuals, some subsisting on abrasive and some on soft diets, have dentition which exhibit various wear rates and wear patterns probably due to the diversity of arch shape, size, and occlusal relationships. Hypsiloid or U-shaped maxillas had a more buccally directed wear in contrast to the parabolic or hyperbolic forms, which exhibit a heavier lingual loading. Varying occlusal conditions also contribute to differing wear patterns over the arches. Individuals with alternate intercuspation, for example, have a more horizontally directed wear. These and other conditions of shape, size, and occlusion emphasize the importance of morphological factors in the production of tooth wear rates and patterns in addition to dietary abrasives.     

Decelerating and sex-dependent tooth wear in Norwegian red deer

In ungulates, tooth wear is often suggested as a proximate cause of senescence. Tooth wear is expected to be sex-dependent since energetic requirements and food selection varies largely between sexes in sexually dimorphic ungulates. Furthermore, tooth wear may lower mastication efficiency, and we predict a negative correlation between tooth wear and body weight or condition. We tested these predictions on data on tooth wear (estimated as height of first molar) of 1,311 male and 1,348 female red deer ( Cervus elaphus) aged 3-25 years and harvested along the west coast of Norway. The rate of tooth wear decreased with age. Males wear teeth at a higher rate (from 0.61 mm/year in 4-year olds to 0.45 mm/year in 11-year olds) than females (from 0.52 mm/year in 4-year olds to 0.39 mm/year in 11-year olds). Molar height correlated positively with body weight in both sexes, but not after adjusting for body size. Molar height was strongly dependent on body size in 3-year-old individuals (when tooth wear is minimal). Earlier reports in the literature of a positive correlation between tooth height and body weight may therefore be due to initial size differences rather than differences in condition due to tooth wear.     

Connecting morphology, function and tooth wear in microchiropterans

A key objective in understanding the dentition of mammals is the ability to predict the function of teeth from their shape. Very few studies have used dental measurements that allow the prediction of comparative tooth effectiveness, particularly when modification in shape due to tooth wear is considered. Here, dental parameters are used in which a change in the parameter is readily interpretable in terms of change in factors such as increased force or energy required for cusps or crests to break down food. The functional parameters were measured for 3-D digital tooth reconstructions of the upper molars of the microchiropteran Chalinolobus gouldii at various stages of tooth wear. The changes in the majority of the parameters, such as decreased tip, edge and cusp sharpnesses, cusp occlusion relief, rake angle and fragment clearance, predict a deterioration in efficacy with increased wear. This conclusion has not been possible with alternative approaches; for instance, there was no significant change in crest length with wear, and so no change in function would be predicted from that measure. Some of the parameters did not change significantly with heavy wear, such as capture area of a crest, pointing to geometrical and design characteristics for the maintenance of shape with wear in the dilambdodont tooth form. Attrition and abrasion can be considered as wear on the relief and rake surfaces of tribosphenic-like crests, respectively. The differences in function of these two surfaces account for the differences in wear patterns.  © 2005 The Linnean Society of London, Biological Journal of the Linnean Society , 2005, 85 , 81–96.     

Experimental model of tooth mobility in the human "in vivo"]

The aim of the present study was to investigate experimentally the mechanical properties of tooth deflection under external loading. These properties have a significant impact on tooth movement during orthodontic treatment. The stresses and strains caused by tooth movement influence bone remodelling, which is the basis of orthodontic treatment. The movement of a tooth as a direct reaction to the forces acting on it is termed "initial" movement. It is nonlinear and has a clearly time-dependent component. While the initial tooth movement represents the totality of the reaction mechanisms of all the tissues of the tooth unit, it is determined primarily by the mechanical properties of the periodontal ligament (PDL). The PDL is the softest tissue of the tooth unit and is therefore subject to the largest deformations when forces act on the crown of the tooth. The objective of orthodontic treatment is to achieve as precise and rapid tooth movement as possible, without provoking such undesired effects as bone and root resorption. To enable the implementation of an optimal orthodontic force system that meets these requirements, a thorough knowledge of the biomechanics of tooth movement is a must.     

Technical note: Occlusal fingerprint analysis: Quantification of tooth wear pattern

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA provides an individual three‐dimensional dental occlusal compass that indicates the major pathways of interaction between antagonists, revealing information about development, spatial position, and enlargement of wear facets. Humans develop a very similar overall pattern of crown contacts, although specific characteristics of wear facets reflect an individual's occlusal relationships and masticatory behavior. We hypothesize that the wear pattern is a unique character and therefore valuable for individual identification. Furthermore we suggest that OFA, when further developed, may be useful for identification of behavioral, biological, and chemical factors affecting crown morphology. Am J Phys Anthropol, 2009. © 2009 Wiley‐Liss, Inc.     

Tooth dislocation: the relationship with tooth wear and dental abscesses

Tooth dislocation (tilting) was recorded in 1,200 skulls from 34 museum collections. The findings of dislocation by tooth type, tooth wear, and abscess location are presented. A model for dislocation based upon the progressive loss of tooth support provides a rational explanation for the phenomenon. Physiological continuous tooth eruption was considered to account for a component of the progressive loss of tooth attachment. The process of attrition, pulp perforation, and dental abscess cavity formation resulted in further, more severe loss of tooth support. Heavy functional forces, in association with greatly reduced bone support, tilted the crown lingually and root buccally. When the tooth had tilted to such an extent that the root apices protruded from the bone and, presumably (in life) through the gingival/mucosal tissues, the infected root canals were effectively isolated from the internal environment. The tooth continued to function. The more typical consequence of severe attrition and dental abscess formation was tooth loss; it also isolated an infected tooth from living tissue, but without the benefit of retaining function.     

Seeds,browse, and tooth wear: a sheep perspective

While grazing as a selective factor towards hypsodont dentition on mammals has gained a lot of attention, the importance of fruits and seeds as fallback resources for many browsing ungulates has caught much less attention. Controlled‐food experiments, by reducing the dietary range, allow for a direct quantification of the effect of each type of items separately on enamel abrasion. We present the results of a dental microwear texture analysis on 40 ewes clustered into four different controlled diets: clover alone, and then three diets composed of clover together with either barley, corn, or chestnuts. Among the seed‐eating groups, only the barley one shows higher complexity than the seed‐free group. Canonical discriminant analysis is successful at correctly classifying the majority of clover‐ and seed‐fed ewes. Although this study focuses on diets which all fall within a single dietary category (browse), the groups show variations in dental microwear textures in relation with the presence and the type of seeds. More than a matter of seed size and hardness, a high amount of kernels ingested per day is found to be correlated with high complexity on enamel molar facets. This highlights the high variability of the physical properties of the foods falling under the browsing umbrella.     

Field age determination of leopards by tooth wear

Age determination is an important tool in wildlife studies. Estimating the age of animals in the field using tooth wear criteria may be subject to error as a result of variations between individuals, habitats and populations. Data on age estimation of leopards and tooth wear characteristics are lacking. Nineteen leopards in Namibia were assessed for tooth eruption and wear. Between 1991 and 1995 leopards (including 13 individuals of known age) were monitored at one year intervals ('28 leopard years') to record age and tooth wear. At the age of two years leopards had fully developed dentition. Wear started with the incisors and canines, and spread to the premolars and molars. A chronology of tooth eruption and wear in relation to age is presented. Above the age of three years, male leopards showed higher frequencies of enamel flaking and canine fractures than females.     

Hypsodonty and tooth facet development in relation to diet and habitat in herbivorous ungulates: implications for understanding tooth wear

相似文献   

The influence of tooth wear on root canal dimensions

The objective was to investigate the relations between tooth wear and root canal dimensions. The experimental group comprised 100 cuspids (canines), 50 of which had advanced abrasion and 50 were without it The dimensions of root canal were investigated at the light microscope level in order to define their vestibulo-oral and mesio-distal diameters in all three thirds. In the groups of teeth without abrasion the MD diameters of root canaliculi in their cervical thirds were greater than in the teeth with advanced abrasion. In the apical third the MD diameters of canaliculi were highly variable in teeth with no signs of abrasion. In the group of teeth with abrasion the MD and VO diameter values of the cervical thirds were significantly smaller than in the group of teeth without abrasion. In the mid-thirds the values of MD diameters were highly variable in the group of teeth with abrasion, whereas the VO diameter values were much greater than in the teeth without abrasion. As regards to the apical thirds, the VO diameter values were greater than in the control teeth. The data presented herewith contribute to better knowledge about tooth wear and are highly useful in restorative and reconstructive dental procedures.