Characterizing and controlling the motion of ssDNA in a solid-state nanopore

Sequencing DNA in a synthetic solid-state nanopore is potentially a low-cost and high-throughput method. Essential to the nanopore-based DNA sequencing method is the ability to control the motion of a single-stranded DNA (ssDNA) molecule at single-base resolution. Experimental studies showed that the average translocation speed of DNA driven by a biasing electric field can be affected by ionic concentration, solvent viscosity, or temperature. Even though it is possible to slow down the average translocation speed, instantaneous motion of DNA is too diffusive to allow each DNA base to stay in front of a sensor site for its measurement. Using extensive all-atom molecular dynamics simulations, we study the diffusion constant, friction coefficient, electrophoretic mobility, and effective charge of ssDNA in a solid-state nanopore. Simulation results show that the spatial fluctuation of ssDNA in 1 ns is comparable to the spacing between neighboring nucleotides in ssDNA, which makes the sensing of a DNA base very difficult. We demonstrate that the recently proposed DNA transistor could potentially solve this problem by electrically trapping ssDNA inside the DNA transistor and ratcheting ssDNA base-by-base in a biasing electric field. When increasing the biasing electric field, we observed that the translocation of ssDNA changes from ratcheting to steady-sliding. The simulated translocation of ssDNA in the DNA transistor was theoretically characterized using Fokker-Planck analysis.     

Microscopic Kinetics of DNA Translocation through synthetic nanopores

We have previously demonstrated that a nanometer-diameter pore in a nanometer-thick metal-oxide-semiconductor-compatible membrane can be used as a molecular sensor for detecting DNA. The prospects for using this type of device for sequencing DNA are avidly being pursued. The key attribute of the sensor is the electric field-induced (voltage-driven) translocation of the DNA molecule in an electrolytic solution across the membrane through the nanopore. To complement ongoing experimental studies developing such pores and measuring signals in response to the presence of DNA, we conducted molecular dynamics simulations of DNA translocation through the nanopore. A typical simulated system included a patch of a silicon nitride membrane dividing water solution of potassium chloride into two compartments connected by the nanopore. External electrical fields induced capturing of the DNA molecules by the pore from the solution and subsequent translocation. Molecular dynamics simulations suggest that 20-basepair segments of double-stranded DNA can transit a nanopore of 2.2 x 2.6 nm(2) cross section in a few microseconds at typical electrical fields. Hydrophobic interactions between DNA bases and the pore surface can slow down translocation of single-stranded DNA and might favor unzipping of double-stranded DNA inside the pore. DNA occluding the pore mouth blocks the electrolytic current through the pore; these current blockades were found to have the same magnitude as the blockade observed when DNA transits the pore. The feasibility of using molecular dynamics simulations to relate the level of the blocked ionic current to the sequence of DNA was investigated.     

Real-Time Nanopore-Based Recognition of Protein Translocation Success

A growing number of new technologies are supported by a single- or multi-nanopore architecture for capture, sensing, and delivery of polymeric biomolecules. Nanopore-based single-molecule DNA sequencing is the premier example. This method relies on the uniform linear charge density of DNA, so that each DNA strand is overwhelmingly likely to pass through the nanopore and across the separating membrane. For disordered peptides, folded proteins, or block copolymers with heterogeneous charge densities, by contrast, translocation is not assured, and additional strategies to monitor the progress of the polymer molecule through a nanopore are required. Here, we demonstrate a single-molecule method for direct, model-free, real-time monitoring of the translocation of a disordered, heterogeneously charged polypeptide through a nanopore. The crucial elements are two “selectivity tags”—regions of different but uniform charge density—at the ends of the polypeptide. These affect the selectivity of the nanopore differently and enable discrimination between polypeptide translocation and retraction. Our results demonstrate exquisite sensitivity of polypeptide translocation to applied transmembrane potential and prove the principle that nanopore selectivity reports on biopolymer substructure. We anticipate that the selectivity tag technique will be broadly applicable to nanopore-based protein detection, analysis, and separation technologies, and to the elucidation of protein translocation processes in normal cellular function and in disease.     

Nucleotide discrimination with DNA immobilized in the MspA nanopore

Nanopore sequencing has the potential to become a fast and low-cost DNA sequencing platform. An ionic current passing through a small pore would directly map the sequence of single stranded DNA (ssDNA) driven through the constriction. The pore protein, MspA, derived from Mycobacterium smegmatis, has a short and narrow channel constriction ideally suited for nanopore sequencing. To study MspA's ability to resolve nucleotides, we held ssDNA within the pore using a biotin-NeutrAvidin complex. We show that homopolymers of adenine, cytosine, thymine, and guanine in MspA exhibit much larger current differences than in α-hemolysin. Additionally, methylated cytosine is distinguishable from unmethylated cytosine. We establish that single nucleotide substitutions within homopolymer ssDNA can be detected when held in MspA's constriction. Using genomic single nucleotide polymorphisms, we demonstrate that single nucleotides within random DNA can be identified. Our results indicate that MspA has high signal-to-noise ratio and the single nucleotide sensitivity desired for nanopore sequencing devices.     

ATP-dependent translocation of proteins along single-stranded DNA: models and methods of analysis of pre-steady state kinetics

Processive DNA helicases are able to translocate along single-stranded DNA (ssDNA) with biased directionality in a nucleoside triphosphate-dependent reaction, although translocation is not generally sufficient for helicase activity. An understanding of the mechanism of protein translocation along ssDNA requires pre-steady state transient kinetic experiments. Although ensemble experimental approaches have been developed recently for the study of translocation of proteins along DNA, quantitative analysis of the complete time-courses from these experiments, which is needed to obtain quantitative estimates of translocation kinetic parameters (rate constants, processivity, step sizes and ATP coupling) has been lacking. We discuss three ensemble transient kinetic experiments that can be used to study protein translocation along ssDNA, along with the advantages and limitations of each approach. We further describe methods to analyze the complete kinetic time-courses obtained from such experiments performed with a series of ssDNA lengths under "single-round" conditions (i.e. in the absence of re-binding of dissociated protein to DNA). These analysis methods utilize a sequential "n-step" model for protein translocation along ssDNA and enable quantitative determinations of the rate constant, processivity and step size for translocation through global non-linear least-squares fitting of the full time-courses.     

Mechanism of How Salt-Gradient-Induced Charges Affect the Translocation of DNA Molecules through a Nanopore

Experiments using nanopores demonstrated that a salt gradient enhances the capture rate of DNA and reduces its translocation speed. These two effects can help to enable electrical DNA sequencing with nanopores. Here, we provide a quantitative theoretical evaluation that shows the positive net charges, which accumulate around the pore entrance due to the salt gradient, are responsible for the two observed effects: they reinforce the electric capture field, resulting in promoted molecule capture rate; and they induce cationic electroosmotic flow through the nanopore, thus significantly retarding the motion of the anionic DNA through the nanopore. Our multiphysical simulation results show that, during the polymer trapping stage, the former effect plays the major role, thus resulting in promoted DNA capture rate, while during the nanopore-penetrating stage the latter effect dominates and consequently reduces the DNA translocation speed significantly. Quantitative agreement with experimental results has been reached by further taking nanopore wall surface charges into account.     

Mechanism of How Salt-Gradient-Induced Charges Affect the Translocation of DNA Molecules through a Nanopore

Experiments using nanopores demonstrated that a salt gradient enhances the capture rate of DNA and reduces its translocation speed. These two effects can help to enable electrical DNA sequencing with nanopores. Here, we provide a quantitative theoretical evaluation that shows the positive net charges, which accumulate around the pore entrance due to the salt gradient, are responsible for the two observed effects: they reinforce the electric capture field, resulting in promoted molecule capture rate; and they induce cationic electroosmotic flow through the nanopore, thus significantly retarding the motion of the anionic DNA through the nanopore. Our multiphysical simulation results show that, during the polymer trapping stage, the former effect plays the major role, thus resulting in promoted DNA capture rate, while during the nanopore-penetrating stage the latter effect dominates and consequently reduces the DNA translocation speed significantly. Quantitative agreement with experimental results has been reached by further taking nanopore wall surface charges into account.     

Nanopore sensor for fast label-free detection of short double-stranded DNAs

Functionalizing surface enhanced the molecular sensing ability of a fabricated nanopore by increasing the translocation duration time for a short double-stranded DNA. The surface of nanopore was derivatized with γ-aminopropyltriethoxysilane and the positively charged surface attracted DNA molecules when they were in the vicinity of nanopore. The translocation duration time of DNA increased due to the strong electrostatic interaction and it enabled us to detect a short double-stranded DNA (<1 kbp) that is under the size limit of a conventional solid state nanopore sensor. Both 539 and 910 bp double-stranded DNAs were analyzed with the surface functionalized nanopore and their translocation kinetics are presented in this work. The new feature of the surface modified nanopore that can detect short double-stranded DNA molecules could readily be applied for a rapid label-free diagnostic analysis in a Lab-On-a-Chip type DNA sensor.     

An ON/OFF biosensor based on blockade of ionic current passing through a solid-state nanopore

Single nanopores have attracted interest for their use as biosensing devices. In general, methods involve measuring ionic current blockades associated with translocation of analytes through the nanopore, but the detection of such short time lasting events requires complex equipment and setup that are critical for convenient routine biosensing. Here we present a novel biosensing concept based on a single nanopore in a silicon nitride membrane and two anchor-linked DNA species that forms trans-pore hybrids, realizing a stable blockade of ionic current through the pore. Molecular recognition events affecting the DNA hybrids cause a pore opening and the consequent establishment of an ionic current. In the present implementation of the device, we constructed a magnetic bead/streptavidin/biotin-DNA1/DNA2-biotin/streptavidin/Quantumdot-cluster complex (where DNA1 is a mismatched reverse complement of DNA2) through a sub-micrometric pore and monitored DNA strand displacement events occurring after addition of an oligonucleotide complementary to DNA2. The electric and mechanical aspects of the novel device, as well as its potential in biosensing are discussed.     

Hydroxymethyluracil modifications enhance the flexibility and hydrophilicity of double-stranded DNA

Oxidation of a DNA thymine to 5-hydroxymethyluracil is one of several recently discovered epigenetic modifications. Here, we report the results of nanopore translocation experiments and molecular dynamics simulations that provide insight into the impact of this modification on the structure and dynamics of DNA. When transported through ultrathin solid-state nanopores, short DNA fragments containing thymine modifications were found to exhibit distinct, reproducible features in their transport characteristics that differentiate them from unmodified molecules. Molecular dynamics simulations suggest that 5-hydroxymethyluracil alters the flexibility and hydrophilicity of the DNA molecules, which may account for the differences observed in our nanopore translocation experiments. The altered physico-chemical properties of DNA produced by the thymine modifications may have implications for recognition and processing of such modifications by regulatory DNA-binding proteins.     

Quantitative analysis of the nanopore translocation dynamics of simple structured polynucleotides

Nanopore translocation experiments are increasingly applied to probe the secondary structures of RNA and DNA molecules. Here, we report two vital steps toward establishing nanopore translocation as a tool for the systematic and quantitative analysis of polynucleotide folding: 1), Using α-hemolysin pores and a diverse set of different DNA hairpins, we demonstrate that backward nanopore force spectroscopy is particularly well suited for quantitative analysis. In contrast to forward translocation from the vestibule side of the pore, backward translocation times do not appear to be significantly affected by pore-DNA interactions. 2), We develop and verify experimentally a versatile mesoscopic theoretical framework for the quantitative analysis of translocation experiments with structured polynucleotides. The underlying model is based on sequence-dependent free energy landscapes constructed using the known thermodynamic parameters for polynucleotide basepairing. This approach limits the adjustable parameters to a small set of sequence-independent parameters. After parameter calibration, the theoretical model predicts the translocation dynamics of new sequences. These predictions can be leveraged to generate a baseline expectation even for more complicated structures where the assumptions underlying the one-dimensional free energy landscape may no longer be satisfied. Taken together, backward translocation through α-hemolysin pores combined with mesoscopic theoretical modeling is a promising approach for label-free single-molecule analysis of DNA and RNA folding.     

A parallel graph decomposition algorithm for DNA sequencing with nanopores

MOTIVATION: With the potential availability of nanopore devices that can sense the bases of translocating single-stranded DNA (ssDNA), it is likely that 'reads' of length approximately 10(5) will be available in large numbers and at high speed. We address the problem of complete DNA sequencing using such reads.We assume that approximately 10(2) copies of a DNA sequence are split into single strands that break into randomly sized pieces as they translocate the nanopore in arbitrary orientations. The nanopore senses and reports each individual base that passes through, but all information about orientation and complementarity of the ssDNA subsequences is lost. Random errors (both biological and transduction) in the reads create further complications. RESULTS: We have developed an algorithm that addresses these issues. It can be considered an extreme variation of the well-known Eulerian path approach. It searches over a space of de Bruijn graphs until it finds one in which (a) the impact of errors is eliminated and (b) both possible orientations of the two ssDNA sequences can be identified separately and unambiguously.Our algorithm is able to correctly reconstruct real DNA sequences of the order of 10(6) bases (e.g. the bacterium Mycoplasma pneumoniae) from simulated erroneous reads on a modest workstation in about 1 h. We describe, and give measured timings of, a parallel implementation of this algorithm on the Cray Multithreaded Architecture (MTA-2) supercomputer, whose architecture is ideally suited to this 'unstructured' problem. Our parallel implementation is crucial to the problem of rapidly sequencing long DNA sequences and also to the situation where multiple nanopores are used to obtain a high-bandwidth stream of reads.     

Mechanisms of pressure-induced water infiltration process through graphene nanopores

Understanding the mechanism of water infiltration through nanopores is essential for wide applications ranging from membrane separation to gene therapy. In this paper, the molecular dynamics simulation method is used to investigate the pressure-assisted water transport process through graphene nanopores. Various factors including the hydrophobicity of nanopore surface, nanopore dimension, temperature as well as external electric field that affect water in permeation into graphene nanopores are discussed. It is found that classic Laplace-Young equation fails and the relationship between pressure and diameter (D) does not follow the 1/D dependence as the characteristic dimension of a nanopore is sufficiently small (smaller than 1?nm). The critical pressure significantly depends on both the pore length and electric field as D is smaller than 5?nm. Besides, enhancing temperature and electric field intensity are obviously beneficial for water infiltration through those nanopores with a diameter smaller than 5?nm.     

Trapping DNA near a Solid-State Nanopore

We demonstrate that voltage-biased solid-state nanopores can transiently localize DNA in an electrolyte solution. A double-stranded DNA (dsDNA) molecule is trapped when the electric field near the nanopore attracts and immobilizes a nonend segment of the molecule across the nanopore orifice without inducing a folded molecule translocation. In this demonstration of the phenomenon, the ionic current through the nanopore decreases when the dsDNA molecule is trapped by the nanopore. By contrast, a translocating dsDNA molecule under the same conditions causes an ionic current increase. We also present finite-element modeling results that predict this behavior for the conditions of the experiment.     

Translocation of E. coli RecQ helicase on single-stranded DNA

A member of the SF2 family of helicases, Escherichia coli RecQ, is involved in the recombination and repair of double-stranded DNA breaks and single-stranded DNA (ssDNA) gaps. Although the unwinding activity of this helicase has been studied biochemically, the mechanism of translocation remains unclear. To this end, using ssDNA of varying lengths, the steady-state ATP hydrolysis activity of RecQ was analyzed. We find that the rate of ATP hydrolysis increases with DNA length, reaching a maximum specific activity of 38 ± 2 ATP/RecQ/s. Analysis of the rate of ATP hydrolysis as a function of DNA length implies that the helicase has a processivity of 19 ± 6 nucleotides on ssDNA and that RecQ requires a minimal translocation site size of 10 ± 1 nucleotides. Using the T4 phage encoded gene 32 protein (G32P), which binds ssDNA cooperatively, to decrease the lengths of ssDNA gaps available for translocation, we observe a decrease in the rate of ATP hydrolysis activity that is related to lattice occupancy. Analysis of the activity in terms of the average gap sizes available to RecQ on the ssDNA coated with G32P indicates that RecQ translocates on ssDNA on average 46 ± 11 nucleotides before dissociating. Moreover, when bound to ssDNA, RecQ hydrolyzes ATP in a cooperative fashion, with a Hill coefficient of 2.1 ± 0.6, suggesting that at least a dimer is required for translocation on ssDNA. We present a kinetic model for translocation by RecQ on ssDNA based on this characterization.     

A graphene-based platform for single nucleotide polymorphism (SNP) genotyping

A facile, rapid, stable and sensitive approach for fluorescent detection of single nucleotide polymorphism (SNP) is designed based on DNA ligase reaction and π-stacking between the graphene and the nucleotide bases. In the presence of perfectly matched DNA, DNA ligase can catalyze the linkage of fluorescein amidite-labeled single-stranded DNA (ssDNA) and a phosphorylated ssDNA, and thus the formation of a stable duplex in high yield. However, the catalytic reaction cannot effectively carry out with one-base mismatched DNA target. In this case, we add graphene to the system in order to produce different quenching signals due to its different adsorption affinity for ssDNA and double-stranded DNA. Taking advantage of the unique surface property of graphene and the high discriminability of DNA ligase, the proposed protocol exhibits good performance in SNP genotyping. The results indicate that it is possible to accurately determine SNP with frequency as low as 2.6% within 40 min. Furthermore, the presented flexible strategy facilitates the development of other biosensing applications in the future.     

Single-Stranded DNA within Nanopores: Conformational Dynamics and Implications for Sequencing; a Molecular Dynamics Simulation Study

Engineered protein nanopores, such as those based on α-hemolysin from Staphylococcus aureus have shown great promise as components of next-generation DNA sequencing devices. However, before such protein nanopores can be used to their full potential, the conformational dynamics and translocation pathway of the DNA within them must be characterized at the individual molecule level. Here, we employ atomistic molecular dynamics simulations of single-stranded DNA movement through a model α-hemolysin pore under an applied electric field. The simulations enable characterization of the conformations adopted by single-stranded DNA, and allow exploration of how the conformations may impact on translocation within the wild-type model pore and a number of mutants. Our results show that specific interactions between the protein nanopore and the DNA can have a significant impact on the DNA conformation often leading to localized coiling, which in turn, can alter the order in which the DNA bases exit the nanopore. Thus, our simulations show that strategies to control the conformation of DNA within a protein nanopore would be a distinct advantage for the purposes of DNA sequencing.     

Direct measurement of single-stranded DNA translocation by PcrA helicase using the fluorescent base analogue 2-aminopurine.

Use of the fluorescent base analogue 2-aminopurine has provided a direct demonstration of the translocation of PcrA helicase toward the 5'-end of single-stranded DNA. Single 2-aminopurine bases are introduced into otherwise standard oligonucleotides and produce a fluorescence signal when PcrA reaches their position. We demonstrate that random binding of PcrA to ssDNA is followed by translocation in an ATP-dependent manner toward the 5'-terminus at 80 bases per second at 20 degrees C. The data also provide information on the kinetics of ssDNA binding to the helicase and of the protein dissociation from the 5'-end of ssDNA. A full kinetic model is presented for ATP-dependent DNA translocation by PcrA helicase.