Antialgal activity of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes against the marine alga Ulva

Marine biofouling has detrimental effects on the environment and economy, and current antifouling coatings research is aimed at environmentally benign, non-toxic materials. The possibility of using contact-active coatings is explored, by considering the antialgal activity of cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes. The antialgal activity was investigated via zoospore settlement and sporeling growth assays of the marine algae Ulva linza and U. lactuca. The assay results for PDMAEMA brushes were compared to those for anionic and neutral surfaces. It was found that only PDMAEMA could disrupt zoospores that come into contact with it, and that it also inhibits the subsequent growth of normally settled spores. Based on the spore membrane properties, and characterization of the PDMAEMA brushes over a wide pH range, it is hypothesized that the algicidal mechanisms are similar to the bactericidal mechanisms of cationic polymers, and that further development could lead to successful contact-active antialgal coatings.     

Surface modification with poly(sulfobetaine methacrylate-co-acrylic acid) to reduce fibrinogen adsorption, platelet adhesion, and plasma coagulation

Zwitterionic sulfobetaine methacrylate (SBMA) polymers were known to possess excellent antifouling properties due to high hydration capacity and neutral charge surface. In this study, copolymers of SBMA and acrylic acid (AA) with a variety of compositions were synthesized and were immobilized onto polymeric substrates with layer-by-layer polyelectrolyte films via electrostatic interaction. The amounts of platelet adhesion and fibrinogen adsorption were determined to evaluate hemocompatibility of poly(SBMA-co-AA)-modified substrates. Among various deposition conditions by modulating SBMA ratio in the copolymers and pH of the deposition solution, poly(SBMA(56)-co-AA(44)) deposited at pH 3.0 possessed the best hemocompatibility. This work demonstrated that poly(SBMA-co-AA) copolymers adsorbed on polyelectrolyte-base films via electrostatic interaction improve hemocompatibility effectively and are applicable for various substrates including TCPS, PU, and PDMS. Furthermore, poly(SBMA-co-AA)-coated substrate possesses great durability under rigorous conditions. The preliminary hemocompatibility tests regarding platelet adhesion, fibrinogen adsorption, and plasma coagulation suggest the potential of this technique for the application to blood-contacting biomedical devices.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Effects of crosslink density in zwitterionic hydrogel coatings on their antifouling performance and susceptibility to silt uptake

Abstract

Hydrogel coatings effectively reduce the attachment of proteins and organisms in laboratory assays, in particular when made from zwitterionic monomers. In field experiments with multiple species and non-living material, such coatings suffer from adsorption of particulate matter. In this study, the zwitterionic monomer 3-[N-(2-methacryloyloxyethyl)-N,N-dimethylammonio] propanesulfonate (SPE) was copolymerized with increasing amounts of the photo-crosslinker benzophenon-4-yloxyethyl methacrylate (BPEMA) to systematically alter the density of crosslinks between the polymer chains. The effect of increasing crosslink density on the antifouling (AF) performance of the coatings was investigated in laboratory assays and fields tests. In both cases, the AF performance was improved by increasing the crosslinker content. The coatings reduced protein, diatom, and barnacle accumulation, and showed better resistance to biomass accumulation. The findings underline that the marine AF performance of hydrogel coatings does not only depend on the specific chemical structure of the polymers, but also on their physico-chemical properties such as rigidity and swelling.     

Amphiphilic hydrolyzable polydimethylsiloxane-b-poly(ethyleneglycol methacrylate-co-trialkylsilyl methacrylate) block copolymers for marine coatings. II. Antifouling laboratory tests and field trials

Abstract

Poly(dimethylsiloxane) (PDMS) elastomer coatings containing an amphiphilic hydrolyzable diblock copolymer additive were prepared and their potential as marine antifouling and antiadhesion materials was tested. The block copolymer additive consisted of a PDMS first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R?=?butyl, isopropyl)-co-poly(ethyleneglycol) methacrylate (PEGMA) copolymer second block. PDMS-b-TRSiMA block copolymer additives without PEGMA units were also used as additives. The amphiphilic character of the coating surface was assessed in water using the captive air bubble technique for measurements of static and dynamic contact angles. The attachment of macro- and microorganisms on the coatings was evaluated by field tests and by performing adhesion tests to the barnacle Amphibalanus amphitrite and the green alga Ulva rigida. All the additive-based PDMS coatings showed better antiadhesion properties to A. amphitrite larvae than to U. rigida spores. Field tests provided meaningful information on the antifouling and fouling release activity of coatings over an immersion period of 23?months.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N'-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2?h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24?h exposure) and cyprid settlement (24 and 48?h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Antifouling potential of Subtilisin A immobilized onto maleic anhydride copolymer thin films

The proteinaceous nature of the adhesives used by most fouling organisms to attach to surfaces suggests that coatings incorporating proteolytic enzymes may provide a technology for the control of biofouling. In the present article, the antifouling (AF) and fouling release potential of model coatings incorporating the surface-immobilized protease, Subtilisin A, have been investigated. The enzyme was covalently attached to maleic anhydride copolymer thin films; the characteristics of the bioactive coatings obtained were adjusted through variation of the type of copolymer and the concentration of the enzyme solution used for immobilization. The bioactive coatings were tested for their effect on the settlement and adhesion strength of two major fouling species: the green alga Ulva linza and the diatom Navicula perminuta. The results show that the immobilized enzyme effectively reduced the settlement and adhesion strength of zoospores of Ulva and the adhesion strength of Navicula cells. The AF efficacy of the bioactive coatings increased with increasing enzyme surface concentration and activity, and was found to be superior to the equivalent amount of enzyme in solution. The results provide a rigorous analysis of one approach to the use of immobilized proteases to reduce the adhesion of marine fouling organisms and are of interest to those investigating enzyme-containing coating technologies for practical biofouling control.     

Understanding the interaction of proteins to ion exchange chromatographic supports: A surface energetics approach

Ion exchange chromatography is one of the most widely used chromatographic technique for the separation and purification of important biological molecules. Due to its wide applicability in separation processes, a targeted approach is required to suggest the effective binding conditions during ion exchange chromatography. A surface energetics approach was used to study the interaction of proteins to different types of ion exchange chromatographic beads. The basic parameters used in this approach are derived from the contact angle, streaming potential, and zeta potential values. The interaction of few model proteins to different anionic and cationic exchanger, with different backbone chemistry, that is, agarose and methacrylate, was performed. Generally, under binding conditions, it was observed that proteins having negative surface charges showed strong to lose interaction (20 kT for Hannilase to 0.5 kT for IgG) with different anionic exchangers (having different positive surface charges). On the contrary, anionic exchangers showed almost no interaction (0–0.1 kT) with the positively charged proteins. An inverse behavior was observed for the interaction of proteins to cationic exchangers. The outcome from these theoretical calculations can predict the binding behavior of different proteins under real ion exchange chromatographic conditions. This will ultimately propose a better bioprocess design for protein separation.     

Enhancing the efficacy of fouling-release coatings against fouling by Mytilus galloprovincialis using nanofillers

Fouling-release (FR) coatings minimise the adhesion strength of fouling organisms. This study describes improved technologies to control the settlement and adhesion of the important fouling organism Mytilus galloprovincialis by incorporating the nanofillers titanium dioxide (TiO₂) and carbon nanotubes (CNTs) in polydimethylsiloxane (PDMS) matrices. The incorporation of TiO₂ prevented larval settlement when photoactivated with UV light, even at the lowest concentration of the nanofiller (3.75 wt%). Notably, there was 100% mortality of pediveligers exposed to photoactivated TiO₂. However, plantigrades initially settled to photoactivated TiO₂, but their adhesion strength was significantly reduced on these surfaces in comparison to blank PDMS. In addition, plantigrades had high mortality after 6 h. In contrast to the enhanced antifouling and FR properties of PDMS incorporating TiO₂, the incorporation of CNTs had no effect on the settlement and adhesion of M. galloprovincialis.     

Hemocompatible poly(NIPAm-MBA-AMPS) colloidal nanoparticles as carriers of anti-inflammatory cell penetrating peptides

Anionic copolymer systems containing sulfated monomers have great potential for delivery of cationic therapeutics, but N-isopropylacrylamide (NIPAm) 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) copolymer nanoparticles have seen limited characterization to date with regard to physical properties relevant to loading and release of therapeutics. Characterization of polymeric nanoparticles incorporating AMPS showed an increased size and decreased thermodynamic swelling ratios of AMPS containing particles as compared to NIPAm nanoparticles lacking AMPS. Particles with increasing AMPS addition showed an increased propensity for uniformity, intraparticle colloidal stability, and drug loading capacity. Peptide encapsulated in particles was shielded from peptide degradation in serum. Particles were shown not impede blood coagulation or to cause hemolysis. This study has demonstrated that AMPS incorporation into traditional NIPAm nanoparticles presents a tunable parameter for changing particle LCST, size, swelling ratio, ζ potential, and cationic peptide loading potential. This one-pot synthesis results in a thermosensitive anionic nanoparticle system that is a potentially useful platform to deliver cationic cell penetrating peptides.     

The application of confocal microscopy to the study of liposome adsorption onto bacterial biofilms

Confocal laser scanning microscopy has been used to visualise the adsorption of fluorescently labelled liposomes on immobilised biofilms of the bacterium Staphylococcus aureus. The liposomes were prepared with a wide range of compositions with phosphatidylcholines as the predominant lipids using the extrusion technique. They had weight average diameters of 125 +/- 5 nm and were prepared with encapsulated carboxyfluorescein. Cationic liposomes were prepared by incorporating dimethyldioctadecylammonium bromide (DDAB) or 3, beta [N-(N1,N1 dimethylammonium ethane)-carbamoyl] cholesterol (DC-chol) and anionic liposomes were prepared by incorporation of phosphatidylinositol (PI). Pegylated cationic liposomes were prepared by incorporation of DDAB and 1,2-dipalmitoylphosphatidylethanolamine-N-[polyethylene glycol)-2000]. Confocal laser scanned images showed the preferential adsorption of the fluorescent cationic liposomes at the biofilm-bulk phase interface which on quantitation gave fluorescent peaks at the interface when scanned perpendicular (z-direction) to the biofilm surface (x-y plane). The biofilm fluorescence enhancement (BFE) at the interface was examined as a function of liposomal lipid concentration and liposome composition. Studies of the extent of pegylation of the cationic liposomes incorporating DDAB, on adsorption at the biofilm-bulk phase interface were made. The results demonstrated that pegylation inhibited adsorption to the bacterial biofilms as seen by the decline in the peak of fluorescence as the mole% DPPE-PEG-2000 was increased in a range from 0 to 9 mole%. The results indicate that confocal laser scanning microscopy is a useful technique for the study of liposome adsorption to bacterial biofilms and complements the method based on the use of radiolabelled liposomes.     

Combinatorial materials research applied to the development of new surface coatings IX: An investigation of novel antifouling/fouling-release coatings containing quaternary ammonium salt groups

Polysiloxane coatings containing chemically-bound (“tethered”) quaternary ammonium salt (QAS) moieties were investigated for potential application as environmental-friendly coatings to control marine biofouling. A combinatorial/high-throughput approach was applied to the investigation to enable multiple variables to be probed simultaneously and efficiently. The variables investigated for the moisture-curable coatings included QAS composition, ie alkyl chain length, and concentration as well as silanol-terminated polysiloxane molecular weight. A total of 75 compositionally unique coatings were prepared and characterized using surface characterization techniques and biological assays. Biological assays were based on two different marine microorganisms, a bacterium, Cellulophaga lytica and a diatom, Navicula incerta, as well as a macrofouling alga, Ulva. The results of the study showed that all three variables influenced coating surface properties as well as antifouling (AF) and fouling-release (FR) characteristics. The incorporation of QAS moieties into a polysiloxane matrix generally resulted in an increase in coating surface hydrophobicity. Characterization of coating surface morphology revealed a heterogeneous, two-phase morphology for many of the coatings investigated. A correlation was found between water contact angle and coating surface roughness, with the contact angle increasing with increasing surface roughness. Coatings based on the QAS moiety containing the longest alkyl chain (18 carbons) displayed the highest micro-roughness and, thus, the most hydrophobic surfaces. With regard to AF and FR properties, coatings based on the 18 carbon QAS moieties were very effective at inhibiting C. lytica biofilm formation and enabling easy removal of Ulva sporelings (young plants) while coatings based on the 14 carbon QAS moities were very effective at inhibiting biofilm growth of N. incerta.     

Poly(dimethyl siloxane) (PDMS) network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)-fluoroalkyl side chains for fouling-release coatings. II. Laboratory assays and field immersion trials

Amphiphilic copolymers containing different amounts of poly(ethylene glycol)-fluoroalkyl acrylate and polysiloxane methacrylate units were blended with a poly(dimethyl siloxane) (PDMS) matrix in different proportions to investigate the effect of both copolymer composition and loading on the biological performance of the coatings. Laboratory bioassays revealed optimal compositions for the release of sporelings of Ulva linza, and the settlement of cypris larvae of Balanus amphitrite. The best-performing coatings were subjected to field immersion tests. Experimental coatings containing copolymer showed significantly reduced levels of hard fouling compared to the control coatings (PDMS without copolymer), their performance being equivalent to a coating based on Intersleek 700?. XPS analysis showed that only small amounts of fluorine at the coating surface were sufficient for good antifouling/fouling-release properties. AFM analyses of coatings under immersion showed that the presence of a regular surface structure with nanosized domains correlated with biological performance.     

The effects of a serine protease,Alcalase®, on the adhesives of barnacle cyprids (Balanus amphitrite)

Barnacles are a persistent fouling problem in the marine environment, although their effects (eg reduced fuel efficiency, increased corrosion) can be reduced through the application of antifouling or fouling-release coatings to marine structures. However, the developments of fouling-resistant coatings that are cost-effective and that are not deleterious to the marine environment are continually being sought. The incorporation of proteolytic enzymes into coatings has been suggested as one potential option. In this study, the efficacy of a commercially available serine endopeptidase, Alcalase® as an antifoulant is assessed and its mode of action on barnacle cypris larvae investigated. In situ atomic force microscopy (AFM) of barnacle cyprid adhesives during exposure to Alcalase supported the hypothesis that Alcalase reduces the effectiveness of the cyprid adhesives, rather than deterring the organisms from settling. Quantitative behavioural tracking of cyprids, using Ethovision? 3.1, further supported this observation. Alcalase removed cyprid ‘footprint’ deposits from glass surfaces within 26 min, but cyprid permanent cement became resistant to attack by Alcalase within 15 h of expression, acquiring a crystalline appearance in its cured state. It is concluded that Alcalase has antifouling potential on the basis of its effects on cyprid footprints, un-cured permanent cement and its non-toxic mode of action, providing that it can be successfully incorporated into a coating.     

Charged hydrophilic polymer brushes and their relevance for understanding marine biofouling

The resistance of charged polymers to biofouling was investigated by subjecting cationic (PDMAEMA), anionic (PSPMA), neutral (PHEMA-co-PEG₁₀MA), and zwitterionic (PSBMA) brushes to assays testing protein adsorption; attachment of the marine bacterium Cobetia marina; settlement and adhesion strength of zoospores of the green alga Ulva linza; settlement of barnacle (Balanus amphitrite and B. improvisus) cypris larvae; and field immersion tests. Several results go beyond the expected dependence on direct electrostatic attraction; PSPMA showed good resistance towards attachment of C. marina, low settlement and adhesion of U. linza zoospores, and significantly lower biofouling than on PHEMA-co-PEG₁₀MA or PSBMA after a field test for one week. PDMAEMA showed potential as a contact-active anti-algal coating due to its capacity to damage attached spores. However, after field testing for eight weeks, there were no significant differences in biofouling coverage among the surfaces. While charged polymers are unsuitable as antifouling coatings in the natural environment, they provide valuable insights into fouling processes, and are relevant for studies due to charging of nominally neutral surfaces.     

Development of biocompatible interpenetrating polymer networks containing a sulfobetaine-based polymer and a segmented polyurethane for protein resistance

Interpenetrating polymer networks (IPNs) were prepared by the modification of a segmented polyurethane (SPU) with a cross-linked sulfobetaine methacrylate (SBMA) polymer. The IPN films that were prepared can effectively resist nonspecific protein adsorption when the distribution of SBMA units within the SPU film is well controlled, and they retain high mechanical strengths inherent from the base SPU films. Furthermore, the zwitterionic and biomimetic nature of sulfobetaine and the ease of SBMA preparation make SBMA-based materials very attractive for a wide range of applications. It is challenging to control the diffusion of highly polar SBMA into the hydrophobic network of SPU. In this study, various parameters governing the formation of IPNs containing SBMA were studied. The chemical composition depth profile of the IPN films was determined by confocal Raman microscopy. The morphology and thickness of these IPN films were examined by atomic force microscopy and scanning electron microscopy. The amount of adsorbed proteins on the IPN films was determined by an enzyme-linked immunosorbent assay. Results show that the amount of adsorbed proteins on the IPN films depends on the incubation conditions, including solvent polarity, incubation time, SBMA monomer ratio, and incubation concentration. It appears that the IPN films prepared in a mixed solvent of higher polarity with long incubation time lead to very low protein adsorption. This study not only introduces a new IPN system containing SBMA, but also provides a fundamental understanding of various parameters governing the formation of IPNs.     

Hydrogen peroxide production from reactive liposomes encapsulating enzymes.

Reactive cationic and anionic liposomes have been prepared from mixtures of dimyristoylphosphatidylcholine (DMPC) and cholesterol incorporating dimethyldioctadecylammonium bromide and DMPC incorporating phosphatidylinositol, respectively. The liposomes were prepared by the vesicle extrusion technique and had the enzymes glucose oxidase (GO) encapsulated in combination with horseradish peroxidase (HRP) or lactoperoxidase (LPO). The generation of hydrogen peroxide from the liposomes in response to externally added D-glucose substrate was monitored using a Rank electrode system polarised to +650 mV, relative to a standard silver-silver chloride electrode. The effects of encapsulated enzyme concentration, enzyme combinations (GO+HRP, GO+LPO), substrate concentration, electron donor and temperature on the production of hydrogen peroxide have been investigated. The electrode signal (peroxide production) was found to increase linearly with GO incorporation, was reduced on addition of HRP and an electron donor (o-dianisidine) and showed a maximum at the lipid chain-melting temperature from the anionic liposomes containing no cholesterol. To aid interpretation of the results, the permeability of the non-reactive substrate (methyl glucoside) across the bilayer membranes was measured. It was found that the encapsulation of the enzymes effected the permeability coefficients of methyl glucoside, increasing them in the case of anionic liposomes and decreasing them in the case of cationic liposomes. These observations are discussed in terms of enzyme bilayer interactions.     

New perfluorinated polycationic dimerizable detergents for the formulation of monomolecular DNA nanoparticles and their in vitro transfection efficiency

We describe the synthesis of new perfluorinated dimerizable detergents which contain a tricationic or tetracationic (linear or branched spermine, respectively) polar head, and report on their cmc, their ability to condense DNA into cationic monomolecular DNA nanoparticles as well as on the in vitro transfection efficiency of these nanoparticles. Such cationic nanoparticles were prone to display efficient cell transfection properties as a result of increased contact to the anionic cell surface and internalization by endocytosis, low size compatible with improved intracellular diffusion and nuclear pore crossing, and the presence of amine function of low pK(a) for their endosomal escape. The challenge was to design polymerizable polycationic detergents that display a cmc high enough for the monomer to perform monomolecular DNA condensation (as cationic particles) and low enough for the dimer to form stable nanoparticles capable of efficient cell transfection. Although we succeeded in formulating small-sized cationic monomolecular DNA nanoparticles (<40 nm) with these dimerizable perfluorinated spermine-based detergents for N/P ratios of up to 5 (N=number of detergent amine equivalents/P=number of DNA phosphate equivalents), these small-sized cationic nanoparticles proved to be poor non-specific transfection agents in vitro, even in the presence of chloroquine. Their poor transfection potential could be due more likely to Brownian motion which prevents these very small-sized particles from sedimentation and adsorption onto the adherent cell monolayer, and, consequently, from proteoglycan-triggered endocytosis.     

Entrapment of Ovalbumin into Liposomes—Factors Affecting Entrapment Efficiency,Liposome Size,and Zeta Potential

Various amounts of Ovalbumin (OVA) were encapsulated into positively and negatively charged multilamellar liposomes, with the aim to investigate the entrapment efficiency in different buffers and to study their effects on the liposome size and zeta potential. Results showed that the entrapment efficiency of OVA in anionic liposomes was the same in 10 mM Phosphate Buffer (PB) as in Phosphate-Buffered Saline (PBS; PB?+?0.15 M NaCl). Also, liposome size was approximately 1200 nm for all anionic liposomes incorporating OVA. The entrapment efficiency of OVA in cationic liposomes was highly dependent on ionic strength. The size of cationic liposomes was approximately 1200 nm in PBS, regardless of protein content, but increased with the amount of the incorporated protein in PB. Aggregation of cationic liposomes in PB was observed when the mass of the protein was 2.5 mg or greater. The zeta potential of anionic liposomes was negative and of cationic liposomes positive in the whole range of protein mass tested. These results show how different compositions of lipid and aqueous phases can be used to vary the entrapment efficiency, liposome size, and zeta potential—the factors that are of great importance for the use of liposomes as drug carriers.     

A Kinetic Approach to Characterize the Electrostatic Environments of Thiol Groups in Proteins

In this study, we synthesized a zwitterionic DTNB derivative, 5-(2-aminoethyl)-dithio-2-nitrobenzoate (ADNB), and characterized its reactions with several cationic, anionic, and neutral thiols. Reactions with ADNB, unlike those with DTNB, are relatively insensitive to electrostatic environments and ionic strengths. At relatively low ionic strength, rate ratios,k_ADNB/k_DTNB, varied from 0.22 for reactions with low-molecular-weight cationic thiols to 3.0 for those with low-molecular-weight anionic thiols. Ak_ADNB/k_DTNBratio of 200 for Cys-34 of BSA appears to reflect a very anionic environment.k_ADNB/k_DTNBratios of 6 and 1, respectively, for canine and equine serum albumins, which have Glu-82 → Asp and Glu-82 → Ala substitutions suggest Glu-82 is the most important anionic residues affecting the reactivity of Cys-34 in BSA.k_ADNB/k_DTNBratios appear to be useful for characterizing electrostatic environments of thiol groups in proteins.