Conductive Boron Nitride as Promising Catalyst Support for the Oxygen Evolution Reaction

Catalyst support with good conductivity and stability is an eternal pursuit in the search for a high‐performance electrocatalyst. Here, an unusual catalyst support, laser‐modified boron nitride with C, O dopants (L‐BN), for the oxygen evolution reaction is reported. L‐BN exhibits unique advantages for electrocatalysis, namely, high corrosion resistance under oxidizing conditions, enhanced electrical conductivity arising from interlayer B–B dipolar interaction, and strong interaction with IrO_x catalyst caused by N? C?N bonds. As an excellent substrate, L‐BN helps to achieve higher activity and stability than its carbon black counterpart.     

One‐Step Template‐Free Synthesis of Highly Porous Boron Nitride Microsponges for Hydrogen Storage

Highly porous, sponge‐like boron nitride materials, namely microsponges (BNMSs), with ultrahigh surface areas up to 1900 m² g^‐1, are prepared by a facile, one‐step, template‐free reaction of boric acid and dicyanamide. Detailed analysis confirms the increase of the interlayer (0002) distances compared to standard graphitic BN and reveals special dislocation structures in the BNMSs. The resulting textural parameters such as the Brunauer‐Emmett‐Teller (BET) specific surface areas and pore volumes are easily tunable over a wide range by adjusting the synthesis temperature or composition of the precursors. It is demonstrated that these microporous materials (with pore widths of 1.0 nm) display comparatively high and reversible H₂ sorption capacities from 1.65 to 2.57 wt% at 1 MPa and –196 °C on a material basis.     

Electronic properties and stability phase diagrams for cubic BN surfaces

This contribution investigates structural and electronic properties as well as stability phase diagrams of surfaces of the cubic boron nitride (c-BN). Our calculated parameters for bulk c-BN agree reasonably well with both experimental and computed values available in the literature. Based on the energies of the three experimentally recognised phases of bulk boron, i.e. α-B₃₆, β-B₁₀₅ and γ-B₂₈, we estimate enthalpy of formation of c-BN to be ?2.8 eV. The c-BN(1?0?0) surface offers separate B and N terminations (denoted as c-BN(1?0?0)_B and c-BN(1?0?0)_N), whereas c-BN(1?1?1) and c-BN(1?1?0) are truncated with combinations of boron and nitrogen atoms (denoted as c-BN(1?1?1)_BN and c-BN(1?1?0)_BN). Optimised geometries of surfaces display interlayer displacements up to the three topmost layers. Downward displacement of surface boron atoms signifies a common geometric feature of all surfaces. Bulk c-BN and its most stable surface c-BN(1?0?0)_N possess no metallic character, with band gaps of 5.46 and 2.7 eV, respectively. We find that, only c-BN(1?0?0)_B configuration exhibits a metallic character. c-BN(1?1?0)_BN and c-BN(1?1?1)_BN surfaces display corresponding band gaps of 2.5 and 3.9 eV and, hence, afford no metallic property.     

Prediction of electrocatalytic activity of some nitrogen-doped polyaromatic hydrocarbons by molecular modelling

Density function theory calculations of minimum energy structure of an oxygen molecule and oxygen atom bonded to the two dimensional molecules, C₂₃NH₁₂, coronene and C₂₁NH₁₄, pentacene doped with nitrogen, indicate the structures are at a minimum on the potential energy surface having no imaginary frequencies. Calculation of the bond dissociation energy (BDE) to remove an oxygen atom from nitrogen-doped pentacene to which is bonded O₂, (C₂₁NH₁₄O₂) shows it is less than that to dissociate O₂. However, this is not the case for nitrogen-doped coronene. This suggests that nitrogen-doped pentacene could be an effective catalyst for the oxygen reduction reaction in fuel cells assuming it is O₂ dissociation. It is also shown that O₂H can bond to nitrogen-doped coronene and pentacene and that the BDE to remove OH is less than that to remove OH from O₂H indicating that N-doped coronene and pentacene could also catalyse this reaction. The calculated adsorption energy for O₂ and O₂H on these molecules is negative indicating they can bond to N-doped coronene and pentacene.     

Comparative prediction of binding affinity of Hydroxyurea anti-cancer to boron nitride and carbon nanotubes as smart targeted drug delivery vehicles

Abstract

In this study, the adsorption of Hydroxyurea (HU) onto the inner and outer surfaces of boron nitride and carbon nanotubes (CNTs) was investigated using the density functional theory calculations and molecular dynamics (MDs) simulations in aqueous solution. The values of the adsorption energy show that HU molecule is preferentially adsorbed inside of boron nitride and CNTs with the molecular axis parallel to the tubes axis, which means that the cavity of nanotubes is favorable for encapsulation of this drug. Also, it was found that the HU/boron nitride nanotube (BNNT) system is more stable than the HU/CNT system. The stability of the complexes of HU/ BNNT attributed to the formation of the intermolecular hydrogen bonds between the H atoms of HU molecule and the N atoms of BNNT, which is confirmed by Bader’s quantum theory of atoms in molecules. The natural bond orbital analysis shows the charge transfers occur from HU molecule to nanotubes in all complexes. Moreover, the adsorption of HU molecule on the surfaces of the nanotubes was investigated by explicit water models. Also, the adsorption behavior of HU on the functionalized boron nitride and CNTs is investigated to design and develop new nanocarriers for biomedical applications. Furthermore, MDs simulations are examined in the presence of one and two drug molecules. The obtained results illustrate that the lowest value of Lennard–Jones (L–J) energy between drug and nanotubes exist in the simulation system with two drug molecules.     

Specific features of the kinetics of H2-O2-O2(a 1Δ g ) mixtures: I. formation and quenching of electronically and vibrationally excited (A′) molecules in H2-O2-O2(A 1Δ g ) mixtures at a temperature of 300 K

Available data on the kinetic processes in H₂-O₂-O₂(a ¹Δ _g ) mixtures are analyzed theoretically, and the ranges in which the rate constants of these processes can vary are determined. The processes of energy transformation in an O₂(a ¹Δ _g )-H₂-H-HO₂ system in the approximations of the fast and slow (in comparison with the vibrational relaxation time of the HO₂ radical) quenching of the electronically excited state are considered. The experiments on the quenching of singlet delta oxygen (SDO) molecules O₂(a ¹Δ _g ) excited in a microwave discharge at a temperature of 300 K and pressure of 6 Torr in a lean hydrogen-oxygen mixture are simulated (by a lean fuel mixture is meant a mixture in which the ratio of the fuel to the oxidizer mass fraction is less than the stoichiometric ratio, which is 2: 1 for a hydrogen-oxygen mixture). It is shown that, over the experimental observation times, the SDO quenching frequency depends on the concentration of molecular hydrogen, the residual odd oxygen fraction in the gas flow, and the ratio between the rate constants of kinetic processes involving HO₂ and HO₂* radicals. Simulations of the microwave discharge and the transport of excited oxygen along the drift tube make it possible to determine the residual odd oxygen concentration in the gas flow. Recommendations on the choice of the rate constants for the O₂(a ¹Δ _g ) + HO₂)A″, v₃″ = 0) ? O₂ + HO₂*(A′, v₃′ = 1), HO₂*(A′v₃′ ≤ 1) + O₂(a ¹Δ _g ) → HO₂*(A′,v₃′ ≥ 6) + O₂, and HO₂*(A′,v₃′ ≤ 1) + O₂(a ¹Δ _g ) → H + O₂ + O₂ processes are given. It is shown that, in the case of slow quenching in a H₂-O₂-O₂(a ¹Δ _g ) mixture at a low temperature, the intensity of hydrogen oxidation is enhanced due to the reaction + HO₂*(A′,v₃′ ≤ 1) + O₂(¹Δ) → H + O₂ + O₂.     

Engineering of a Low‐Cost,Highly Active,and Durable Tantalate–Graphene Hybrid Electrocatalyst for Oxygen Reduction

The oxygen reduction reaction (ORR) is one of the most important reactions in renewable energy conversion and storage devices. The full deployment of these devices depends on the development of highly active, stable, and low‐cost catalysts. Herein, a new hybrid material consisting of Na₂Ta₈O_21?x/Ta₂O₅/Ta₃N₅ nanocrystals grown on N‐doped reduced graphene oxide is reported. This catalyst shows a significantly enhanced ORR activity by ≈4 orders of magnitude in acidic media and by ≈2 orders of magnitude in alkaline media compared to individual Na₂Ta₈O_21?x on graphene. Moreover, it has excellent stability in both acid and alkaline media. It also has much better methanol tolerance than the commercial Pt/C, which is relevant to methanol fuel cells. The high ORR activity arises not only from the synergistic effect among the three Ta phases, but also from the concomitant nitrogen doping of the reduced graphene oxide nanosheets. A correlation between ORR activity and nitrogen content is demonstrated. Deep insights into the mechanism of the synergistic effect among these three Ta‐based phases, which boosts the ORR's kinetics, are acquired by combining specific experiments and density functional theory calculations.     

Criconemella anastomoides n. sp. (Nematoda: Criconematina) from Pakistan

Criconemella anastomoides, described and illustrated herein, is characterized by the presence of regular anastomosis on the body, two zig zag lateral lines, stylet knobs sloping posteriorly, short stylet, and short body length.     

Triptan partition in model membranes

The development of fuel cells as clean-energy technologies is largely limited by the prohibitive cost of the noble-metal catalysts needed for catalyzing the oxygen reduction reaction (ORR) in fuel cells. A fundamental understanding of catalyst design principle that links material structures to the catalytic activity can accelerate the search for highly active and abundant bimetallic catalysts to replace platinum. Here, we present a first-principles study of ORR on Ag₁₂Cu cluster in alkaline environment. The adsorptions of O₂, OOH, and OH on Cu-doped Ag₁₃ are stronger than on Ag₁₃. The d-band centers of adsorption sites show the Cu-doping makes d-electrons transferred to higher energy state, and improves O₂ dissociation. ORR processes on Ag₁₂Cu and Ag₁₃ indicate Cu-doping can strongly promote ORR, and ORR process can be better preformed on Ag₁₂Cu than on Ag₁₃. For four-electron transfer, the effective reversible potential is 0.401 V/RHE on Ag₁₂Cu in alkaline medium.     

Effects of Weak Surface Modification on Co/SiO2 Catalyst for Fischer-Tropsch Reaction

A weak surface modification is applied to Co/SiO₂ catalyst by hydrothermal treatment at 180°C for 5 h. Aluminum is introduced to Co/SiO₂ catalysts during the surface modification. The effects of surface modification on Co/SiO₂ catalyst are studied by changing the operating sequences of surface modification and cobalt impregnation in the catalyst preparation. Surface modification before cobalt impregnation makes Co₃O₄ particle small and dispersed into the deep part of enlarged pore in SiO₂, while surface modification after cobalt impregnation does not obviously change the particle size of Co₃O₄. The improved amplitude of catalytic activity is similar for the two kinds of catalysts, but they are benefited from different factors. The content of iso-hydrocarbons in the products is increased by the surface modifications.     

Transesterification of Nannochloropsis oculata microalga’s lipid to biodiesel on Al2O3 supported CaO and MgO catalysts

In this study, we present the activities of Al₂O₃ supported CaO and MgO catalysts in the transesterification of lipid of yellow green microalgae, Nannochloropsis oculata, as a function of methanol amount and the CaO and MgO loadings at 50 °C. We found that pure CaO and MgO were not active and CaO/Al₂O₃ catalyst among all the mixed oxide catalysts showed the highest activity. Not only the basic site density but also the basic strength is important to achieve the high biodiesel yield. Biodiesel yield over 80 wt.% CaO/Al₂O₃ catalyst increased to 97.5% from 23% when methanol/lipid molar ratio was 30.     

Use of Dimethyl Sulfoxide to Detect Hydroxyl Radical during Bacteria-Induced Hypersensitive Reaction

Excess active oxygen is generated during the hypersensitive reaction (HR), an incompatible reaction of plants to bacterial pathogens. During HR, lipid peroxidation correlates chronologically with production of the oxygen species, superoxide (O₂^.−). However, O₂^.− may not be the active oxygen species that initiates lipid peroxidation. Evidence from other systems suggest that O₂^.− is converted to the hydroxyl radical (HO^.) before lipid peroxidation is initiated. Until recently, HO^. could not be detected directly in vivo. This study utilizes a newly reported method to directly detect and quantify the formation of HO^. in vivo. Dimethyl sulfoxide (DMSO), used as a molecular probe, is oxidized by HO^., forming the stable compound methanesulfinic acid. The methanesulfinic acid can be easily extracted from plant tissues and measured with a colorimetric assay. This study demonstrates significant increases in HO^. concentration after simultaneous infiltration of cucumber (Cucumis sativa L.) plants with paraquat and DMSO. The concentration of HO^. did not increase significantly when cucumber plants were infiltrated simultaneously with the HR-inducing bacteria, Pseudomonas syringae pv. pisi, and with DMSO. Lipid peroxidation, however, could be measured at times when HO^. was not detectable. It appears that HO^. is not generated during bacteria-induced HR; therefore, HO^. is not responsible for the initiation of lipid peroxidation.     

Nitroxide-Stimulated H2O2 Decomposition by Peroxidases and Pseudoperoxidases

Many copper and iron complexes can be reduced by O^-₂ as well as by H₂O₂. According to the rates of reduction and the concentration of O^-₂ and H₂O₂, the metal complexes may serve either as catalyst of O^-₂ dismutation or as catalysts of the reaction between O^-₂ and H₂O₂ to form OH' radical (Haber-Weiss reaction). Various factors which influence whether metal complexes protect the biological systems from superoxide toxicity or enhance it are discussed.     

Atmospheric Oxidation of Hydrocarbons

Hydrocarbon oxidation in the atmosphere proceeds generally by the following sequence of reactions: hydrocarbon + OH → alkyl radical + H₂O, alkyl radical + O,(³I) → alkylperoxy radical, alkylperoxy radical + NO → alkoxy radical + NO₂, alkoxy radical + O₂(³X) -→ aldehyde + HO,. The atmospheric lifetimes of hydrocarbons are determined by their reactivity towards OH as well as by the average OH concentration level. They are compound specific and vary from several hours to several years. Hydrocarbon oxidation chains couple with other trace gases (O_v, HO_x, and NO_v). For the conditions of the average continental atmosphere an increase of the oxidative potential (HO_v, O_x) is predicted through hydrocarbon oxidation.     

Robust Sub‐Monolayers of Co3O4 Nano‐Islands: A Highly Transparent Morphology for Efficient Water Oxidation Catalysis

The scalable synthesis of highly transparent and robust sub‐monolayers of Co₃O₄ nano‐islands, which efficiently catalyze water oxidation, is reported. Rapid aerosol deposition of Co₃O₄ nanoparticles and thermally induced self‐organization lead to an ultra‐fine nano‐island morphology with more than 94% light transmission at a wavelength of 500 nm. These transparent sub‐monolayers demonstrate a remarkable mass‐weighted water oxidation activity of 2070–2350 A g_Co3O4^?1 and per‐metal turnover frequency of 0.38–0.62 s^?1 at an overpotential of 400 mV in 1 m NaOH aqueous solution. This mixed valent cobalt oxide structure exhibits excellent long‐term electrochemical and mechanical stability preserving the initial catalytic activity over more than 12 h of constant current electrolysis and 1000 consecutive voltammetric cycles. The potential of the Co₃O₄ nano‐islands for photoelectrochemical water splitting has been demonstrated by incorporation of co‐catalysts in GaN nanowire photoanodes. The Co₃O₄‐GaN photoanodes reveal significantly reduced onset overpotentials, improved photoresponse and photostability compared to the bare GaN ones. These findings provide a highly performing catalyst structure and a scalable synthesis method for the engineering of efficient photoanodes for integrated solar water‐splitting cells.     

Perovskite modified catalysts with improved coke resistance for steam reforming of glycerol to renewable hydrogen fuel

Catalytic steam reforming of renewable feedstock to renewable energy or chemicals always goes with intense coking activities that produce carbonaceous products leading to low performance and eventual catalyst deactivation. Supported metal catalyst such as Ni/Al₂O₃ is known to catalysed gasification and decomposition of biomass feedstock largely for renewable fuel production with promising results. Catalyst deactivation from high carbon deposition, agglomeration and phase transformations resulting to rapid deactivation are some of the issues identified with the use of the catalyst. In this work, improvement on the coke resistance and catalytic properties of Ni/Al₂O₃ catalyst is sought via the use of a thermally stable and coke-resistant perovskite La_0.75Sr_0.25Cr_0.5Mn_0.5O_3-δ (LSCM) as catalyst promoter/modifier and involving Zirconia-doped Ceria (Ce-Zr) as alternative support in steam reforming of pure and by-product glycerol. The stabilizing influence of the LSCM on the Ni catalyst has improved stability against agents of deactivation with a consequent significant improvement of catalytic activity of Ni/Al₂O₃ in H₂ production and robust suppression of carbon deposition. Particularly, the synergy between the LSCM promoter and alternative Ce_0.75Zr_0.25O₂ support enhanced the basic and redox properties known for Ce_0.75Zr_0.25O₂ support in contrast to the week acid centres in γ-Al₂O₃ support which further improved nickel stability, catalyst–support interaction with a resultant high catalytic activity and robust coke suppression as a result of enhanced oxygen mobility. There is correlation between the product distribution, nature of coke deposited and reforming temperature as well as type of support and structural modification. Hence, integration of a robust perovskite material as a catalyst promoter and choice of support could be tailored in design and development of robust catalyst systems to improve the performance of supported metal catalysts, particularly the suppression of carbon deposition for hydrocarbon and biomass conversion to renewable fuel or chemicals.     

A peptide-mediated and hydroxyl radical HO*-involved oxidative degradation of cellulose by brown-rot fungi

A special low-molecular-weight peptide named Gt factor, was isolated and purified from the extracellular culture of brown-rot fungi Gloeophyllum trabeum via gel filtration chromatography and HPLC. It has been shown to reduce Fe³⁺ to Fe²⁺. Electron paramagnetic resonance (EPR) spectroscopy revealed Gt factor was able to drive H₂O₂ generation via a superoxide anion O₂ ^.- intermediate and mediate the formation of hydroxyl radical HO^. in the presence of O₂. All the results indicated that Gt factor could oxidize the cellulose, disrupt the inter- and intrahydrogen bonds in cellulose chains by a HO^. -involved mechanism. This resulted in depolymerization of the cellulose, which made it accessible for further enzymatic hydrolysis.     

Teleocichla preta,a new species of cichlid from the Rio Xingu Basin in Brazil (Teleostei: Cichlidae)

Teleocichla preta nov. sp. inhabits the rapids along the Rio Xingu and lower portion of the Rio Iriri. It is the largest species in the genus, reaching 121·3 mm standard length (L_S) while others do not reach more than 87·8 mm L_S. Teleocichla preta is distinguished from all other species of Teleocichla by the unique blackish (in live specimens) or dark brown (preserved specimens) overall colouration of the body, which masks the faint vertical bars or zig‐zag pattern of blotches on the flanks. Teleocichla preta also has a deeper body and a deep laterally compressed caudal peduncle, unlike any other congener, as well as a stout lower pharyngeal tooth plate bearing molariform teeth on its median area.     

Active MnOx Electrocatalysts Prepared by Atomic Layer Deposition for Oxygen Evolution and Oxygen Reduction Reactions

The ability to deposit conformal catalytic thin films enables opportunities to achieve complex nanostructured designs for catalysis. Atomic layer deposition (ALD) is capable of creating conformal thin films over complex substrates. Here, ALD‐MnO_x on glassy carbon is investigated as a catalyst for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), two reactions that are of growing interest due to their many applications in alternative energy technologies. The films are characterized by X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, ellipsometry, and cyclic voltammetry. The as‐deposited films consist of Mn(II)O, which is shown to be a poor catalyst for the ORR, but highly active for the OER. By controllably annealing the samples, Mn₂O₃ catalysts with good activity for both the ORR and OER are synthesized. Hypotheses are presented to explain the large difference in the activity between the MnO and Mn₂O₃ catalysts for the ORR, but similar activity for the OER, including the effects of surface oxidation under experimental conditions. These catalysts synthesized though ALD compare favorably to the best MnO_x catalysts in the literature, demonstrating a viable way to produce highly active, conformal thin films from earth‐abundant materials for the ORR and the OER.     

Improved Cycling Stability of Li[Ni0.90Co0.05Mn0.05]O2 Through Microstructure Modification by Boron Doping for Li‐Ion Batteries

Boron‐doped Li[Ni_0.90Co_0.05Mn_0.05]O₂ cathodes are synthesized by adding B₂O₃ during the lithiation of the hydroxide precursor. Density functional theory confirms that boron doping at a level as low as 1 mol% alters the surface energies to produce a highly textured microstructure that can partially relieve the intrinsic internal strain generated during the deep charging of Li[Ni_0.90Co_0.05Mn_0.05]O₂. The 1 mol% B‐Li[Ni_0.90Co_0.05Mn_0.05]O₂ cathode thus delivers a discharge capacity of 237 mAh g^?1 at 4.3 V, with an outstanding capacity retention of 91% after 100 cycles at 55 °C, which is 15% higher than that of the undoped Li[Ni_0.90Co_0.05Mn_0.05]O₂ cathode. This proposed synthesis strategy demonstrates that an optimal microstructure exists for extending the cycle life of Ni‐rich Li[Ni_1‐x‐yCo_xMn_y]O₂ cathodes that have an inadequate cycling stability in electric vehicle applications and indicates that an optimal microstructure can be achieved through surface energy modification.