Production of δ-decalactone from linoleic acid via 13-hydroxy-9(Z)-octadecenoic acid intermediate by one-pot reaction using linoleate 13-hydratase and whole <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> cells

Objective

To produce δ-decalactone from linoleic acid by one-pot reaction using linoleate 13-hydratase with supplementation with whole Yarrowia lipolytica cells.

Results

Whole Y. lipolytica cells at 25 g l^?1 produced1.9 g l^?1 δ-decalactone from 7.5 g 13-hydroxy-9(Z)-octadecenoic acid l^?1 at pH 7.5 and 30 °C for 21 h. Linoleate 13-hydratase from Lactobacillus acidophilus at 3.5 g l^?1 with supplementation with 25 g Y. lipolytica cells l^?1 in one pot at 3 h produced 1.9 g l^?1 δ-decalactone from 10 g linoleic acid l^?1 via 13-hydroxy-9(Z)-octadecenoic acid intermediate at pH 7.5 and 30°C after 18 h, with a molar conversion yield of 31 % and productivity of 106 mg l^?1 h^?1.

Conclusion

To the best of our knowledge, this is the first production of δ-decalactone using unsaturated fatty acid.

     

Secondary metabolites released into the rhizosphere by <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> and <Emphasis Type="Italic">Fusarium</Emphasis> spp. as underestimated component of nonspecific replant disease

Background and aims

A study was performed to investigate the role of fungal metabolites released into the rhizosphere of replanted orchards as a potential biotic component of tree growth decline.

Methods

The phytotoxicity of the gamma ray-sterilized crude culture filtrates of sixteen fungal species originating from replanted apple orchards was tested in a bioassay. Low molecular weight compounds released by Fusarium spp. were analyzed.

Results

The fungal culture filtrates affected seedling growth and health with an activity that varied from growth inhibition to promotion. Three out of the six species of Fusarium tested produced species-specific mycotoxins such as equisetin and enniatin B and D (<1 μg ml^?1 and <6 μg ml^?1, respectively) associated with root-tip necrosis, whereas fusaric acid (80–230 μg ml^?1) was associated with asymptomatic plant growth inhibition. These findings were consistent with those obtained using pure compounds. Moreover, methoxyconidiol, paecilaminol, integrastatin B and other biologically active compounds, whose fungal origin and phytotoxicity have not yet been reported, were found. in all fungal filtrates.

Conclusions

Findings suggest that i) phytopathogenicity of soil borne fungi can be expressed regardless of root infection; ii) a synergistic interaction between co-occurring mycotoxins and other biologically active compounds may explain plant growth inhibition. Iii) fungal metabolites released into soil may represent an underestimated component of nonspecific replant disease.

     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

Phosphoenolpyruvate-supply module in <Emphasis Type="Italic">Escherichia coli</Emphasis> improves <Emphasis Type="Italic">N</Emphasis>-acetyl-<Emphasis Type="SmallCaps">d</Emphasis>-neuraminic acid biocatalysis

Objectives

N-Acetyl-d-neuraminic acid (Neu5Ac) is often synthesized from exogenous N-acetylglucosamine (GlcNAc) and excess pyruvate. We have previously constructed a recombinant Escherichia coli strain for Neu5Ac production using GlcNAc and intracellular phosphoenolpyruvate (PEP) as substrates (Zhu et al. Biotechnol Lett 38:1–9, 2016).

Results

PEP synthesis-related genes, pck and ppsA, were overexpressed within different modes to construct PEP-supply modules, and their effects on Neu5Ac production were investigated. All the PEP-supply modules enhanced Neu5Ac production. For the best module, pCDF-pck-ppsA increased Neu5Ac production to 8.6 ± 0.15 g l^?1, compared with 3.6 ± 0.15 g l^?1 of the original strain. Neu5Ac production was further increased to 15 ± 0.33 g l^?1 in a 1 l fermenter.

Conclusions

The PEP-supply module can improve the intracellular PEP supply and enhance Neu5Ac production, which benefited industrial Neu5Ac production.

     

Nitrogen resorption in senescing leaf blades of rice exposed to free-air CO<Subscript>2</Subscript> enrichment (FACE) under different N fertilization levels

Background and Aims

The effects of Sb(V), alone or combined with Se, on the growth and root development of plants are unknown. The aim of this study is to investigate the interaction between selenite and different forms of Sb and the effects on their uptake in rice and on rice root morphology.

Methods

A hydroponic experiment was conducted that contained fourteen treatments. The treatment levels for Se were 0.5 and 1 mg L^?1, and the treatment levels for Sb(III) and Sb(V) were 5 and 15 mg L^?1.

Results

Sb(V) alone significantly reduced the surface area, mean diameter and volume of the roots, whereas Sb(III) alone reduced the values of most parameters of root morphology. The addition of 1 mg L^?1 Se significantly enhanced the surface area, number of medium roots, and Sb concentration in the roots subjected to 15 mg L^?1 Sb(V), but it decreased the number of root forks, the number and proportion of fine roots, and the shoot Sb concentration under exposure to 15 mg L^?1 Sb(III). When the plants were subjected to 1 mg L^?1 Se, the addition of 15 mg L^?1 Sb(III) markedly reduced the shoot and root Se concentrations and the number of root tips, root forks, and fine roots and increased the mean root diameter. However, the addition of Sb(V) did not significantly affect the root and shoot Se concentrations but significantly decreased the number of root forks and fine roots and increased the proportion of medium roots.

Conclusions

Se and Sb(III) showed antagonistic effects on uptake in the shoots, but not in the roots, of paddy rice. A range of Se concentrations could stimulate the uptake of Sb in both the shoots and roots of paddy rice exposed to Sb(V).

     

Rapid and efficient degradation of bisphenol A by chloroperoxidase from <Emphasis Type="Italic">Caldariomyces fumago</Emphasis>: product analysis and ecotoxicity evaluation of the degraded solution

Objectives

To degrade enzymatically bisphenol A (BPA) that causes serious environmental concerns and is difficult to be degraded by chemical or physical methods.

Results

BPA (150 mg l^?1) was completely degraded by chloroperoxidase (CPO)/H₂O₂ within 7 min at room temperature, atmospheric pressure with the enzyme at 6 μg CPO ml^?1. The degradation products were identified by HPLC–MS, which suggested involvement of multiple steps. Enzymatic treatment followed by existing bioremediation technologies (activated sludge) enhanced removal of COD from 9 to 54 %. Using an ecotoxicity evaluation with Chlorella pyrenoidosa, the degradation products had a lower toxicity than BPA.

Conclusion

BPA can be degraded rapidly and efficiently under mild conditions with chloroperoxidase at 6 μg ml^?1. The degradation products had a lower toxicity than BPA.

     

Conversion of glycerol to 1,3-dihydroxyacetone by glycerol dehydrogenase co-expressed with an NADH oxidase for cofactor regeneration

Objectives

To investigate the efficiency of a cofactor regeneration enzyme co-expressed with a glycerol dehydrogenase for the production of 1,3-dihydroxyacetone (DHA).

Results

In vitro biotransformation of glycerol was achieved with the cell-free extracts containing recombinant GlyDH (glycerol dehydrogenase from Escherichia coli), LDH (lactate dehydrogenase form Bacillus subtilis) or LpNox1 (NADH oxidase from Lactobacillus pentosus), giving DHA at 1.3 g l^?1 (GlyDH/LDH) and 2.2 g l^?1 (GlyDH/LpNox1) with total turnover number (TTN) of NAD⁺ recycling of 6039 and 11100, respectively. Whole cells of E. coli (GlyDH–LpNox1) co-expressing both GlyDH and LpNox1 were constructed and converted 10 g glycerol l^?1 to DHA at 0.2–0.5 g l^?1 in the presence of zero to 2 mM exogenous NAD⁺. The cell free extract of E. coli (GlyDH–LpNox) converted glycerol (2–50 g l^?1) to DHA from 0.5 to 4.0 g l^?1 (8–25 % conversion) without exogenous NAD⁺.

Conclusions

The disadvantage of the expensive consumption of NAD⁺ for the production of DHA has been overcome.

     

Characterization of a flavin-containing monooxygenase from <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> and its application to production of indigo and indirubin

Objective

To examine the role of a gene encoding flavin-containing monooxygenase (cFMO) from Corynebacterium glutamicum ATCC13032 when cloned and expressed in Escherichia coli for the production of indigo pigments.

Results

The blue pigments produced by recombinant E. coli were identified as indigo and indirubin. The cFMO was purified as a fused form with maltose-binding protein (MBP). The enzyme was optimal at 25 °C and pH 8. From absorption spectrum analysis, the cFMO was classified as a flavoprotein. FMO activity was strongly inhibited by 1 mM Cu²⁺ and recovered by adding 1–10 mM EDTA. The enzyme catalyzed the oxidation of TMA, thiourea, and cysteamine, but not glutathione or cysteine. MBP-cFMO had an indole oxygenase activity through oxygenation of indole to indoxyl. The recombinant E. coli produced 685 mg indigo l^?1 and 103 mg indirubin l^?1 from 2.5 g l-tryptophan l^?1.

Conclusion

The results suggest the cFMO can be used for the microbial production of both indigo and indirubin.

     

Regular enzyme recovery enhances cellulase production by <Emphasis Type="Italic">Trichoderma reesei</Emphasis> in fed-batch culture

Objective

To protect the enzymes during fed-batch cellulase production by means of partial enzyme recovery at regular intervals.

Results

Extracellular enzymes were partially recovered at the intervals of 1, 2, or 3 days. Mycelia were also removed to avoid contamination. Increases in the total harvested cellulase (24–62%) and β-glucosidase (22–76%) were achieved. In fermentor cultivation when the enzymes were recovered every day with 15% culture broth. The total harvested cellulase and β-glucosidase activity increased by 43 and 58%, respectively, with fungal cell concentration maintained at 3.5–4.5 g l^?1.

Conclusion

Enzyme recovery at regular intervals during fed-batch cellulase cultivation could protect the enzyme in the culture broth and enhance the enzyme production when the fungal cell concentration is maintained in a reasonable range.

     

Contribution of direct electron transfer mechanisms to overall electron transfer in microbial fuel cells utilising <Emphasis Type="Italic">Shewanella oneidensis</Emphasis> as biocatalyst

Objectives

To investigate the contribution of direct electron transfer mechanisms to electricity production in microbial fuel cells by physically retaining Shewanella oneidensis cells close to or away from the anode electrode.

Results

A maximum power output of 114 ± 6 mWm^?2 was obtained when cells were retained close to the anode using a dialysis membrane. This was 3.5 times more than when the cells were separated away from the anode. Without the membrane the maximum power output was 129 ± 6 mWm^?2. The direct mechanisms of electron transfer contributed significantly to overall electron transfer from S. oneidensis to electrodes, a result that was corroborated by another experiment where S. oneidensis cells were entrapped in alginate gels.

Conclusion

S. oneidensis transfers electrons primarily by direct electron transfer as opposed to mediated electron transfer.

     

Improved production of carotenoid-free welan gum in a genetic-engineered <Emphasis Type="Italic">Alcaligenes</Emphasis> sp. ATCC31555

Objective

To improve the production of welan gum and obtain a carotenoid-free strain while reducing the fermentation and post-treatment costs.

Results

The vitreoscilla globin (vgb) gene combined with the β-galactosidase (lacZ) promoter was inserted into the phytoene synthase (crtB) gene region of the chromosome in Alcaligenes sp. ATCC31555. When the recombinant strain was grown in a 5 l fermentor, welan gum was produced at 24 ± 0.4 g l^?1 compared to 21 g ± 0.4 g l^?1 in the wild type. Furthermore, the carotenoid-free welan gum produced using Alcaligenes sp. ATCC31555 VHb strain was less expensive with improved properties.

Conclusions

Alcaligenes sp. ATCC31555 VHb strain was a better neutral welan-producing strain with a higher production than the wild-type strain.

     

Enhancement of production and activity of alkaline zinc metalloprotease from <Emphasis Type="Italic">Salinivibrio proteolyticus</Emphasis> using low intensity direct electric current and zinc nanoparticles

Objectives

To improve the production and activity of an alkaline zinc metalloprotease from Salinivibrio proteolyticus in response to ZnSO₄ (ionic and nanoparticle forms) and low intensity direct electric current (LIDC).

Results

A DC of 50 µA for 10 min increased enzyme production from 35 to 53 U ml^?1 when applied to the stationary phase bacterial cells. Zn²⁺ improved enzyme production better than zinc nanoparticles (52 vs. 43.5 U ml^?1). Zinc nanoparticles (0.5 mM) added to an enzyme reaction mixture containing casein (0.65 %) and 20 mM Tris/HCl buffer (pH 8) improved enzyme activity more than Zn²⁺ (42 vs. 36 U ml^?1).

Conclusion

LIDC exposure (50 µA, 10 min) to the stationary phase bacterial cells increases metalloprotease production in Salinivibrio. A low concentration of zinc nanoparticles (0.5 mM) increases maximum enzyme activity.

     

Strain improvement of <Emphasis Type="Italic">Trichoderma viride</Emphasis> for increased cellulase production by irradiation of electron and <Superscript>12</Superscript>C<Superscript>6+</Superscript>-ion beams

Objectives

To improve cellulase production and activity, Trichoderma viride GSICC 62010 was subjected to mutation involving irradiation with an electron beam and subsequently with a ¹²C⁶⁺-ion beam.

Results

Mutant CIT 626 was the most promising cellulase producer after preliminary and secondary screening. Soluble protein production and cellulase activities were increased mutifold. The optimum temperature, pH and culture time for the maximum cellulase production of the selected mutant were 35 °C, pH 5 and 6 days. The highest cellulase production was obtained using wheat bran. The prepared cellulases from T. viride CIT 626 had twice the hydrolytic performance with sawdust (83 %) than that from the parent strain (42.5 %). Furthermore, molecular studies demonstrated that there were some key mutation sites suggesting that some amino acid changes in the protein caused by base mutations had led to the enhanced cellulase production and activity.

Conclusions

Mutagenesis with electron and ¹²C⁶⁺-ion beams could be developed as an effective tool for improvement of cellulase producing strains.

     

High-yield production of pure tagatose from fructose by a three-step enzymatic cascade reaction

Objective

To produce tagatose from fructose with a high conversion rate and to establish a high-yield purification method of tagatose from the reaction mixture.

Results

Fructose at 1 M (180 g l^?1) was converted to 0.8 M (144 g l^?1) tagatose by a three-step enzymatic cascade reaction, involving hexokinase, plus ATP, fructose-1,6-biphosphate aldolase, phytase, over 16 h with a productivity of 9 g l^?1 h^?1. No byproducts were detected. Tagatose was recrystallized from ethanol to a purity of 99.9% and a yield of 96.3%. Overall, tagatose at 99.9% purity was obtained from fructose with a yield of 77%.

Conclusion

This is the first biotechnological production of tagatose from fructose and the first application of solvent recrystallization for the purification of rare sugars.

     

Rapid evolution of hyaluronan synthase to improve hyaluronan production and molecular mass in <Emphasis Type="Italic">Bacillus subtilis</Emphasis>

Objectives

To improve the production and molecular mass of the glycosaminoglycan hyaluronan (HA) in Bacillus subtilis by engineering hyaluronan synthase (HAS) from Streptococcus zooepidemicus.

Results

By mutating regions within HAS intracellular domains, five positive variants exhibiting higher HA production (from 1.22 to 2.24 g l^?1) and molecular mass values (from 1.20 to 1.36 × 10⁶ Da) were constructed and characterized. Overexpression of the V5 variant and the genes tuaD and glmU increased HA production and molecular mass to 2.8 g l^?1 and 2.4 × 10⁶ Da, respectively.

Conclusions

This study provides a novel strategy for improving HA production and its molecular mass.

     

Expression,characterization and mutagenesis of a novel glutamate decarboxylase from <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Objectives

To search for a novel glutamate decarboxylase (GAD) with an optimum pH towards near-neutrality in order to improve production of gamma-aminobutyric acid (GABA) in recombinant hosts.

Results

A novel glutamate decarboxylase, BmGAD, from Bacillus megaterium was overexpressed and purified. BmGAD was approximately 53 kDa by SDS-PAGE analysis. Its optimum activity was at pH 5 and 50 °C. BmGAD had a specific activity of 59 ± 5.2 U mg^?1 at pH 6, which is the highest value reported so far. The apparent Km and V_max values of BmGAD were 8 ± 0.5 mM and 150 ± 4.7 U mg^?1, respectively. Through site-directed mutagenesis, two BmGAD mutants (E294R and H467A) showed higher V_max values than that of wild-type, with the values of 210 ± 6.9 and 180 ± 4.1 U mg^?1 at pH 5 and 50 °C, respectively.

Conclusions

The unusual high activity of BmGAD at pH 6 makes it an attractive GABA-producing candidate in industrial application.

     

Production of <Emphasis Type="Italic">trans</Emphasis>-10,<Emphasis Type="Italic">cis</Emphasis>-12-conjugated linoleic acid using permeabilized whole-cell biocatalyst of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Objective

To improve the production of trans-10,cis-12-conjugated linoleic acid (t10,c12-CLA) from linoleic acid in recombinant Yarrowia lipolytica.

Results

Cells of the yeast were permeabilized by freeze/thawing. The optimal conditions for t10,c12-CLA production by the permeabilized cells were at 28 °C, pH 7, 200 rpm with 1.5 g sodium acetate l^?1, 100 g wet cells l^?1, and 25 g LA l^?1. Under these conditions, the permeabilized cells produced 15.6 g t10,c12-CLA l^?1 after 40 h, with a conversion yield of 62 %. The permeabilized cells could be used repeatedly for three cycles, with the t10,c12-CLA extracellular production remaining above 10 g l^?1.

Conclusion

Synthesis of t10,c12-CLA was achieved using a novel method, and the production reported in this work is the highest value reported to date.

     

Responses of rice to chronic and acute iron toxicity: genotypic differences and biofortification aspects

Background and aims

Iron (Fe) toxicity is a wide-spread stress in lowland rice production. The aim of this study was to differentiate between responses to acute Fe stress during the vegetative stage and chronic Fe stress throughout the growing period.

Methods

Six rice genotypes were tested in a semi-artificial greenhouse setup, in which acute (almost 1500 mg L^?1 Fe in soil solution during the vegetative stage) and chronic (200 to 300 mg L^?1 Fe throughout the season) Fe toxicity were simulated.

Results

Acute Fe stress induced early development of heavy leaf bronzing, whereas moderate symptoms occurred in the chronic treatment throughout the season. Grain yields were only reduced in the chronic stress treatment (?23 %) due to reductions in spikelet fertility, grain number and grain weight. Symptom formation during the early growth stages did not reflect yield responses in all genotypes. Only one genotype showed increases in grain Fe concentrations (24 % in the acute stress and 44 % in the chronic stress) compared to the control.

Conclusions

Contrasting genotypes responded differently to acute and chronic Fe toxicity, and one genotype showed consistent tolerance and the ability to translocate excess Fe into grains. These traits can be useful in the adaptive breeding of rice for Fe toxic environments.

     

Isolation,purification and characterization of a pH tolerant and temperature stable proteinaceous protease inhibitor from marine <Emphasis Type="Italic">Pseudomonas mendocina</Emphasis>

Objectives

An extracellular protease inhibitor (BTPI-301) of trypsin was purified and characterized from an isolate of Pseudomonas mendocina.

Results

BTPI-301was purified to homogeneity by (NH₄)₂SO₄, precipitation, DEAE Sepharose and CNBr-activated Sepharose chromatography. Homogeneity was proved by native PAGE and SDS-PAGE. The intact molecular mass was 11567 Da by MALDI-TOF analysis. BTPI-301was a competitive inhibitor with a Ki of 3.5 × 10^?10 M. It was stable and active at pH 4–12 and also at 4–90 °C for 1 h. Peptide mass fingerprinting by MALDI revealed that the BTPI-301 is a new inhibitor not reported so far with protease inhibitory activity. The pI of the inhibitor was 3.8. The stoichiometry of trypsin-BTPI-301 interaction is 1:1. The inhibitor was specific towards trypsin.

Conclusion

A pH tolerant and thermostable protease inhibitor BTPI-301 active against trypsin was purified and characterized from P. mendocina that could be developed and used as biopreservative as well as biocontrol agent.