An engineered disulfide bridge mimics the effect of calcium to protect neutral protease against local unfolding

The extreme thermal stabilization achieved by the introduction of a disulfide bond (G8C/N60C) into the cysteine-free wild-type-like mutant (pWT) of the neutral protease from Bacillus stearothermophilus[Mansfeld J, Vriend G, Dijkstra BW, Veltman OR, Van den Burg B, Venema G, Ulbrich-Hofmann R & Eijsink VG (1997) J Biol Chem272, 11152-11156] was attributed to the fixation of the loop region 56-69. In this study, the role of calcium ions in the guanidine hydrochloride (GdnHCl)-induced unfolding and autoproteolysis kinetics of pWT and G8C/N60C was analyzed by fluorescence spectroscopy, far-UV CD spectroscopy and SDS/PAGE. First-order rate constants (kobs) were evaluated by chevron plots (ln kobs vs. GdnHCl concentration). The kobs of unfolding showed a difference of nearly six orders of magnitude (DeltaDeltaG# = 33.5 kJ.mol(-1) at 25 degrees C) between calcium saturation (at 100 mM CaCl2) and complete removal of calcium ions (in the presence of 100 mM EDTA). Analysis of the protease variant W55F indicated that calcium binding-site III, situated in the critical region 56-69, determines the stability at calcium ion concentrations between 5 and 50 mM. In the chevron plots the disulfide bridge in G8C/N60C shows a similar effect compared with pWT as the addition of calcium ions, suggesting that the introduced disulfide bridge fixes the region (near calcium binding-site III) that is responsible for unfolding and subsequent autoproteolysis. Owing to the presence of the disulfide bridge, the DeltaDeltaG# is 13.2 kJ.mol(-1) at 25 degrees C and 5 mM CaCl2. Non-linear chevron plots reveal an intermediate in unfolding probably caused by local unfolding of the loop 56-69. The occurrence of this intermediate is prevented by calcium concentrations of > 5 mM, or the introduction of the disulfide bridge G8C/N60C.     

Reduction of the buried intrachain disulfide bond of the constant fragment of the immunoglobulin light chain: global unfolding under physiological conditions

The constant (CL) fragment of the immunoglobulin light chain contains only one intrachain disulfide bond buried in the interior of the molecule. The kinetics of reduction with dithiothreitol of the disulfide bond were studied at various concentrations of guanidine hydrochloride at pH 8.0 and 25 degrees C. It was found that the disulfide bond is reduced even in the absence of guanidine hydrochloride. The results of the reduction kinetics were compared with those of the unfolding and refolding kinetics of the CL fragment previously reported [Goto, Y., & Hamaguchi, K. (1982) J. Mol. Biol. 156, 891-910]. It was shown that the reduction of the disulfide bond proceeds through a species with a conformation very similar to that of the fully unfolded one and that the CL fragment undergoes global unfolding transition even in water.     

Extrinsic 33-kilodalton protein of spinach oxygen-evolving complexes: kinetic studies of folding and disulfide reduction

The 33-kDa protein is one of the three extrinsic proteins in the oxygen-evolving photosystem II complexes. The protein has one intrachain disulfide bond. On reduction of this disulfide bond, the protein was unfolded and lost its activity. On the basis of the unfolding equilibrium curve obtained by using guanidine hydrochloride, the free energy change of unfolding in the absence of guanidine hydrochloride was estimated to be 4.4 kcal/mol using the Tanford method [Tanford, C. (1970) Adv. Protein Chem. 24, 1-95] and 2.8 kcal/mol using the linear extrapolation method. The unfolding of the 33-kDa protein caused by reduction was explained in terms of the entropy change associated with reduction of the intrachain disulfide bond. The kinetics of the reduction of the disulfide bond using dithiothreitol were studied at various concentrations of guanidine hydrochloride at pH 7.5 and 25 degrees C. The disulfide bond was reduced even in the absence of guanidine hydrochloride. The unfolding and refolding kinetics of the 33-kDa protein using guanidine hydrochloride were also studied under the same conditions, and the results were compared with those for the reduction kinetics. It was shown that the reduction of the disulfide bond proceeds through a species in which the disulfide bond is exposed by local fluctuations.     

Folding mechanism of mutant human lysozyme C77/95A with increased secretion efficiency in yeast.

A mutant human lysozyme C77/95A, in which Cys77 and Cys95 are replaced with alanine, has been characterized by 8-fold greater secretion in yeast (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967) and almost the same three-dimensional structure as wild-type human lysozyme (Inaka, K., Taniyama, Y., Kikuchi, M., Morikawa, K., and Matsushima, M. (1991) J. Biol. Chem. 266, 12599-12603). To clarify the molecular features of C77/95A and the reason for its increased secretion in yeast, the stabilities of the mutant C77/95A and the wild-type proteins were examined by guanidine hydrochloride denaturation, and the unfolding-refolding kinetics were determined from circular dichroism and fluorescence stopped-flow measurements. Equilibrium experiments showed that the delta G of unfolding of C77/95A in water was 5.8 kcal/mol less stable than that of the wild-type protein at pH 4.0 and 10 degrees C. The unfolding rate of C77/95A was 4 orders of magnitude faster than that of the wild-type protein whereas the two proteins shared similar refolding rates. The slowly refolding phase of the wild-type protein disappeared in C77/95A, indicating that the disulfide bond affects this phase. These observations show that the disulfide bond Cys77-Cys95 contributes to the stabilization of the folded form of human lysozyme by suppressing the unfolding rate and that the increase in the unfolding rate, or the disappearance of the slowly refolding phase in vitro, could correlate with the increase in secretion efficiency in vivo.     

Reversible alkylation of an active site methionine residue in dehydroquinase

Iodoacetic acid inactivates dehydroquinase by simultaneously alkylating 2 methionine residues (Met-23 and Met-205), presumed to be active site residues (described in Kleanthous, C., Campbell, D. G., and Coggins, J. R. (1990) J. Biol. Chem. 265, 10929-10934). Although both sites are carboxymethylated to the same degree in the inactivated enzyme, the modification of Met-205 may be reversed by treatment with mercaptoethanol at alkaline pH, as shown by the stoichiometric loss of label from this site. This, in turn, leads to partial reactivation of the inactive enzyme. Alkylation of Met-23 is not reversible under these conditions. The chemistry of the cleavage reaction at Met-205 was investigated by isolating the cleavage product which was identified by mass spectrometry as the ammonium salt of 2-hydroxyethyl thioacetate. This result is consistent with nucleophilic attack by the thiolate anion of mercaptoethanol on the alpha-carbon of the carboxymethyl moiety, which restores the side chain of the methionine residue (Met-205) and liberates 2-hydroxyethyl thioacetate. The differential reactivity of the 2 carboxymethylated methionine residues toward mercaptoethanol is likely to be a reflection of their different microenvironments in the folded protein. This assertion is borne out by unfolding experiments which indicate that neither of the carboxymethylated methionine residues in dicarboxymethylated dehydroquinase is susceptible to mercaptoethanol cleavage if the protein is first denatured by either guanidine hydrochloride or urea. Furthermore, this denatured material refolds after removal of denaturant to yield protein with reactivation properties similar to untreated, dicarboxymethylated enzyme.     

Effect of an engineered disulfide bond on the folding of T4 lysozyme at low temperatures

Equilibrium and kinetic effects on the folding of T4 lysozyme were investigated by fluorescence emission spectroscopy in cryosolvent. To study the role of disulfide cross-links in stability and folding, a comparison was made with a mutant containing an engineered disulfide bond between Cys-3 (Ile-3 in the wild type) and Cys-97, which links the C-terminal domain to the N terminus of the protein [Perry & Wetzel (1984) Science 226, 555]. In our experimental system, stability toward thermal and denaturant unfolding was increased slightly as a result of the cross-link. The corresponding reduced protein was significantly less stable than the wild type. Unfolding and refolding kinetics were carried out in 35% methanol, pH 6.8 at -15 degrees C, with guanidine hydrochloride as the denaturant. Unfolding/refolding of the wild-type and reduced enzyme showed biphasic kinetics both within and outside the denaturant-induced transition region and were consistent with the presence of a populated intermediate in folding. Double-jump refolding experiments eliminated proline isomerization as a possible cause for the biphasicity. The disulfide mutant protein, however, showed monophasic kinetics in all guanidine concentrations studied.     

Stabilization of Escherichia coli ribonuclease H by introduction of an artificial disulfide bond.

To examine the effect of the introduction of a disulfide bond on the stability of Escherichia coli ribonuclease H, a disulfide bond was engineered between Cys13, which is present in the wild-type enzyme, and Cys44, which is substituted for Asn44 by site-directed mutagenesis. The disulfide bond was only formed between these residues upon oxidation in vitro with redox buffer. The conformational and thermal stabilities were estimated from the guanidine hydrochloride and thermal denaturation curves, respectively. The oxidized (cross-linked) mutant enzyme showed a Tm of 62.3 degrees C, which was 11.8 degrees C higher than that observed for the wild-type enzyme. The free energy change of unfolding in the absence of denaturant, delta G[H2O], and the mid-point of the denaturation curve, [D]1/2, of the oxidized mutant enzyme were also increased by 2.1-2.8 kcal/mol and 0.36-0.48 M, respectively. Introduction of a disulfide bond thus greatly enhanced both the thermal and conformational stabilities of the enzyme. In addition, kinetic analyses for the enzymatic activities of mutant enzymes suggest that Thr43 and Asn44 are involved in the substrate-binding site of the enzyme.     

Thermal unfolding of nucleoside hydrolases from the hyperthermophilic archaeon Sulfolobus solfataricus: role of disulfide bonds

Nucleoside hydrolases are metalloproteins that hydrolyze the N-glycosidic bond of β-ribonucleosides, forming the free purine/pyrimidine base and ribose. We report the stability of the two hyperthermophilic enzymes Sulfolobus solfataricus pyrimidine-specific nucleoside hydrolase (SsCU-NH) and Sulfolobus solfataricus purine-specific inosineadenosine- guanosine nucleoside hydrolase (SsIAG-NH) against the denaturing action of temperature and guanidine hydrochloride by means of circular dichroism and fluorescence spectroscopy. The guanidine hydrochloride-induced unfolding is reversible for both enzymes as demonstrated by the analysis of the refolding process by activity assays and fluorescence measurements. The evidence that the denaturation of SsIAG-NH carried out in the presence of reducing agents proved to be reversible indicates that the presence of disulfide bonds interferes with the refolding process of this enzyme. Both enzymes are highly thermostable and no thermal unfolding transition can be obtained up to 108°C. SsIAG-NH is thermally denatured under reducing conditions (T(m)=93°C) demonstrating the contribution of disulfide bridges to enzyme thermostability.     

Conformational unfolding studies of three-disulfide mutants of bovine pancreatic ribonuclease A and the coupling of proline isomerization to disulfide redox reactions

The equilibrium stability and conformational unfolding kinetics of the [C40A, C95A] and [C65S, C72S] mutants of bovine pancreatic ribonuclease A (RNase A) have been studied. These mutants are analogues of two nativelike intermediates, des[40-95] and des[65-72], whose formation is rate-limiting for oxidative folding and reductive unfolding at 25 degrees C and pH 8.0. Upon addition of guanidine hydrochloride, both mutants exhibit a fast conformational unfolding phase when monitored by absorbance and fluorescence, as well as a slow phase detected only by fluorescence which corresponds to the isomerizations of Pro93 and Pro114. The amplitudes of the slow phase indicate that the two prolines, Pro93 and Pro114, are fully cis in the folded state of the mutants and furthermore that the 40-95 disulfide bond is not responsible for the quenching of Tyr92 fluorescence observed in the slow unfolding phase, contrary to an earlier proposal [Rehage, A., and Schmid, F. X. (1982) Biochemistry 21, 1499-1505]. The ratio of the kinetic unfolding m value to the equilibrium m value indicates that the transition state for conformational unfolding in the mutants exposes little solvent-accessible area, as in the wild-type protein, indicating that the unfolding pathway is not dramatically altered by the reduction of the 40-95 or 65-72 disulfide bond. The stabilities of the folded mutants are compared to that of wild-type RNase A. These stabilities indicate that the reduction of des[40-95] to the 2S species is rate-limited by global conformational unfolding, whereas that of des[65-72] is rate-limited by local conformational unfolding. The isomerization of Pro93 may be rate-limiting for the reduction of the 40-95 disulfide bond in the native protein and in the des[65-72] intermediate.     

Protein engineering of a disulfide bond in a beta/alpha-barrel protein.

A disulfide bond has been introduced in the beta/alpha-barrel enzyme N-(5'-phosphoribosyl)anthranilate isomerase from Saccharomyces cerevisiae. The design of this disulfide bond was based on a model structure of this enzyme, built from the high-resolution crystal structure of the N-(5'-phosphoribosyl)anthranilate isomerase domain from Escherichia coli. The disulfide cross-link is spontaneously formed in vitro between residues 27 and 212, located in the structurally adjacent alpha-helices 1 and 8 of the outer helical ring of the beta/alpha-barrel. It creates a loop of 184 residues that account for 83% of the sequence of this enzyme, thus forming a quasi circular protein. The cross-linked mutant enzyme displays wild-type steady-state kinetic parameters. Measurements of the equilibrium constant for the reduction of this disulfide bond by 1,4-dithiothreitol show that its bond strength is comparable to that of other engineered protein disulfide bonds. The oxidized, cross-linked N-(5'-phosphoribosyl)anthranilate isomerase mutant is about 1.0 kcal/mol more stable than the wild-type enzyme, as estimated from its equilibrium unfolding transitions by guanidine hydrochloride.     

An engineered disulfide bond in dihydrofolate reductase

Substitution of cysteine for proline-39 in Escherichia coli dihydrofolate reductase by oligonucleotide-directed mutagenesis positions the new cysteine adjacent to already existing cysteine-85. When the mutant protein is expressed in the E. coli cytosol, the cysteine sulfur atoms are found, by X-ray crystallographic analysis, to be in van der Waals contact but not covalently bonded to one another. In vitro oxidation by dithionitrobenzoate results in formation of a disulfide bond between residues 39 and 85 with a geometry close to that of the commonly observed left-handed spiral. Comparison of 2.0-A-refined crystal structures of the oxidized (cross-linked) and reduced (un-cross-linked) forms of the mutant enzyme shows that the conformation of the enzyme molecule was not appreciably affected by formation of the disulfide bond but that details of the molecule's thermal motion were altered. The disulfide-cross-linked enzyme is at least 1.8 kcal/mol more stable with respect to unfolding, as measured by guanidine hydrochloride denaturation, than either the wild-type or the reduced (un-cross-linked) mutant enzyme. Nevertheless, the cross-linked form is not more resistant to thermal denaturation. Moreover, the appearance of intermediates in the guanidine hydrochloride denaturation profile and urea-gradient polyacrylamide gels indicates that the folding/unfolding pathway of the disulfide-cross-linked enzyme has changed significantly.     

Conformation and stability of the constant fragment of the immunoglobulin light chain containing an intramolecular mercury bridge

The constant fragment of the immunoglobulin light chain in which the intramolecular disulfide bond is reduced (reduced CL fragment) assumes a conformation very similar to that of the intact CL fragment and contains two sulfhydryl groups buried in the interior of the molecule [Goto, Y., & Hamaguchi, K. (1979) J. Biochem. (Tokyo) 86, 1433-1441]. In order to understand the role of the disulfide bond, a derivative in which the disulfide bond is replaced by an S-Hg-S bond was prepared and its conformation and stability were studied. The derivative was prepared by reacting the reduced CL fragment with mercuric chloride. Kinetic studies showed that the reaction is rate-limited by the unfolding process of the reduced CL fragment. The mercury derivative was as compact as the intact CL or reduced CL fragment, and a tryptophyl residue was found to be buried near the S-Hg-S bond in the interior of the protein molecule. Judging from the circular dichroic spectrum, however, the beta-structure characteristic of the immunoglobulin fold was disturbed. The stability of the derivative to guanidine hydrochloride was lower than that of the intact CL fragment, but the unfolding transition was reversible and cooperative. Decreased stability of the mercury derivative is due to its folded conformation being distorted by introduction of the S-Hg-S bond.     

Sites of aggrecan cleavage by recombinant human aggrecanase-1 (ADAMTS-4)

Aggrecan, the major proteoglycan of cartilage that provides its mechanical properties of compressibility and elasticity, is one of the first matrix components to undergo measurable loss in arthritic diseases. Two major sites of proteolytic cleavage have been identified within the interglobular domain (IGD) of the aggrecan core protein, one between amino acids Asn(341)-Phe(342) which is cleaved by matrix metalloproteinases and the other between Glu(373)-Ala(374) that is attributed to aggrecanase. Although several potential aggrecanase-sensitive sites had been identified within the COOH terminus of aggrecan, demonstration that aggrecanase cleaved at these sites awaited isolation and purification of this protease. We have recently cloned human aggrecanase-1 (ADAMTS-4) (Tortorella, M. D., Burn, T. C., Pratta, M. A., Abbaszade, I., Hollis, J. M., Liu, R., Rosenfeld, S. A., Copeland, R. A., Decicco, C. P., Wynn, R., Rockwell, A., Yang, F., Duke, J. L., Solomon, K., George, H., Bruckner, R., Nagase, H., Itoh, Y., Ellis, D. M., Ross, H., Wiswall, B. H., Murphy, K., Hillman, M. C., Jr., Hollis, G. F., Newton, R. C., Magolda, R. L., Trzaskos, J. M., and Arner, E. C. (1999) Science 284, 1664-1666) and herein demonstrate that in addition to cleavage at the Glu(373)-Ala(374) bond, this protease cleaves at four sites within the chondroitin-sulfate rich region of the aggrecan core protein, between G2 and G3 globular domains. Importantly, we show that this cleavage occurs more efficiently than cleavage within the IGD at the Glu(373)-Ala(374) bond. Cleavage occurred preferentially at the KEEE(1667-1668)GLGS bond to produce both a 140-kDa COOH-terminal fragment and a 375-kDa fragment that retains an intact G1. Cleavage also occurred at the GELE(1480-1481)GRGT bond to produce a 55-kDa COOH-terminal fragment and a G1-containing fragment of 320 kDa. Cleavage of this 320-kDa fragment within the IGD at the Glu(373)-Ala(374) bond then occurred to release the 250-kDa BC-3-reactive fragment from the G1 domain. The 140-kDa GLGS-reactive fragment resulting from the preferential cleavage was further processed at two additional cleavage sites, at TAQE(1771)-(1772)AGEG and at VSQE(1871-1872)LGQR resulting in the formation of a 98-kDa fragment with an intact G3 domain and two small fragments of approximately 20 kDa. These data elucidate the sites and efficiency of cleavage during aggrecan degradation by aggrecanase and suggest potential tools for monitoring aggrecan cleavage in arthritis.     

Crystal structure of the disulfide bond-deficient azurin mutant C3A/C26A: how important is the S-S bond for folding and stability?

Azurin has a beta-barrel fold comprising eight beta-strands and one alpha helix. A disulfide bond between residues 3 and 26 connects the N-termini of beta strands beta1 and beta3. Three mutant proteins lacking the disulfide bond were constructed, C3A/C26A, C3A/C26I and a putative salt bridge (SB) in the C3A/S25R/C26A/K27R mutant. All three mutants exhibit spectroscopic properties similar to the wild-type protein. Furthermore, the crystal structure of the C3A/C26A mutant was determined at 2.0 A resolution and, in comparison to the wild-type protein, the only differences are found in the immediate proximity of the mutation. The mutants lose the 628 nm charge-transfer band at a temperature 10-22 degrees C lower than the wild-type protein. The folding of the zinc loaded C3A/C26A mutant was studied by guanidine hydrochloride (GdnHCl) induced denaturation monitored both by fluorescence and CD spectroscopy. The midpoint in the folding equilibrium, at 1.3 M GdnHCl, was observed using both CD and fluorescence spectroscopy. The free energy of folding determined from CD is -24.9 kJ.mol-1, a destabilization of approximately 20 kJ.mol-1 compared to the wild-type Zn2+-protein carrying an intact disulfide bond, indicating that the disulfide bond is important for giving azurin its stable structure. The C3A/C26I mutant is more stable and the SB mutant is less stable than C3A/C26A, both in terms of folding energy and thermal denaturation. The folding intermediate of the wild-type Zn2+-azurin is not observed for the disulfide-deficient C3A/C26A mutant. The rate of unfolding for the C3A/C26A mutant is similar to that of the wild-type protein, suggesting that the site of the mutation is not involved in an early unfolding reaction.     

Cis proline mutants of ribonuclease A. I. Thermal stability.

A chemically synthesized gene for ribonuclease A has been expressed in Escherichia coli using a T7 expression system (Studier, F.W., Rosenberg, A.H., Dunn, J.J., & Dubendorff, J.W., 1990, Methods Enzymol. 185, 60-89). The expressed protein, which contains an additional N-terminal methionine residue, has physical and catalytic properties close to those of bovine ribonuclease A. The expressed protein accumulates in inclusion bodies and has scrambled disulfide bonds; the native disulfide bonds are regenerated during purification. Site-directed mutations have been made at each of the two cis proline residues, 93 and 114, and a double mutant has been made. In contrast to results reported for replacement of trans proline residues, replacement of either cis proline is strongly destabilizing. Thermal unfolding experiments on four single mutants give delta Tm approximately equal to 10 degrees C and delta delta G0 (apparent) = 2-3 kcal/mol. The reason is that either the substituted amino acid goes in cis, and cis<==>trans isomerization after unfolding pulls the unfolding equilibrium toward the unfolded state, or else there is a conformational change, which by itself is destabilizing relative to the wild-type conformation, that allows the substituted amino acid to form a trans peptide bond.     

Dramatic stabilization of the native state of human carbonic anhydrase II by an engineered disulfide bond

To find a disulfide pair that could stabilize the enzyme human carbonic anhydrase II (HCA II), we grafted the disulfide bridge from the related and unusually stable carbonic anhydrase form from Neisseria gonorrhoeae (NGCA) into the human enzyme. Thus, the two Cys residues at positions 23 and 203 were engineered into a pseudo-wild-type form of HCA II (C206S), giving the mutant C206S/A23C/L203C. The disulfide bond was not formed spontaneously. The native state of the reduced form of the mutant was markedly destabilized (2.9 kcal/mol) compared to that of HCA II. Formation of a disulfide bridge was achieved by treatment by oxidized glutathione. This led to a significant stabilization of the native conformation. Compared to HCA II the unfolding midpoint for the variant was increased from 0.9 to 1.7 M guanidine HCl, corresponding to a stabilization of 3.7 kcal/mol. This makes the human enzyme almost as stable as the model protein NGCA, for which the unfolding of the native state has a midpoint at 2.1 M guanidine HCl. The stabilized protein underwent, contrary to all other investigated variants of HCA II, an apparent two-state unfolding transition, as judged from intrinsic Trp fluorescence measurements. A molten-globule intermediate is nevertheless formed but is suppressed because of the high denaturant pressure it faces upon rupture of the native state.     

Specificity and inhibition of proteases from human immunodeficiency viruses 1 and 2

Highly purified, recombinant preparations of the virally encoded proteases from human immunodeficiency viruses (HIV) 1 and 2 have been compared relative to 1) their specificities toward non-viral protein and synthetic peptide substrates, and 2) their inhibition by several P1-P1' pseudodipeptidyl-modified substrate analogs. Hydrolysis of the Leu-Leu and Leu-Ala bonds in the Pseudomonas exotoxin derivative, Lys-PE40, is qualitatively the same for HIV-2 protease as published earlier for the HIV-1 enzyme (Tomasselli, A. G., Hui, J. O., Sawyer, T. K., Staples, D. J., FitzGerald, D. J., Chaudhary, V. K., Pastan, I., and Heinrikson, R. L. (1990) J. Biol. Chem. 265, 408-413). However, the rates of cleavage at these two sites are reversed for the HIV-2 protease which prefers the Leu-Ala bond. The kinetics of hydrolysis of this protein substrate by both enzymes are mirrored by those obtained from cleavage of model peptides. Hydrolysis by the two proteases of other synthetic peptides modeled after processing sites in HIV-1 and HIV-2 gag polyproteins and selected analogs thereof demonstrated differences, as well as similarities, in selectivity. For example, while the two proteases were nearly identical in their rates of cleavage of the Tyr-Pro bond in the HIV-1 gag fragment, Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val, the HIV-1 protease showed a 64-fold enhancement over the HIV-2 enzyme in hydrolysis of a Tyr-Val bond in the same template. Accordingly, the HIV-2 protease appears to have a different specificity than the HIV-1 enzyme; it is better able to hydrolyze substrates with small amino acids in P1 and P1', but is variable in its rate of hydrolysis of peptides with bulky substituents in these positions. In addition to these comparisons of the two proteases with respect to substrate specificity, we present inhibitor structure-activity data for the HIV-2 protease. Relative to P1-P1' statine or Phe psi [CH2N]Pro-modified pseudopeptidyl inhibitors, compounds having Xaa psi[CH(OH)CH2]Yaa inserts were found to show significantly higher affinities to both enzymes, generally binding from 10 to 100 times stronger to HIV-1 protease than to the HIV-2 enzyme. Molecular modeling comparisons based upon the sequence homology of the two enzymes and x-ray crystal structures of HIV-1 protease suggest that most of the nonconservative amino acid replacements occur in regions well outside the catalytic cleft, while only subtle structural differences exist within the active site.(ABSTRACT TRUNCATED AT 400 WORDS)     

Denaturant-dependent folding of bovine pancreatic trypsin inhibitor mutants with two intact disulfide bonds.

The equilibrium and kinetic behavior of the guanidine hydrochloride (Gdn-HCl) induced unfolding/refolding of four bovine pancreatic trypsin inhibitor (BPTI) mutants was examined by using ultraviolet difference spectroscopy. In three of the mutants, we replaced the buried 30-51 disulfide bond with alanine at position 51 and valine (Val30/Ala51), alanine (Ala30/Ala51), or threonine (Thr30/Ala51) at position 30. For the fourth mutant, the solvent-exposed 14-38 disulfide was substituted by a pair of alanines (Ala14/Ala38). All mutants retained the 5-55 disulfide. Experiments were performed under oxidizing conditions; thus, both the unfolded and folded forms retained two native disulfide bonds. Equilibrium experiments demonstrated that all four mutants were destabilized relative to wild-type BPTI. However, the stability of the 30-51 mutants increased with the hydrophobicity of the residue substituted at position 30. Kinetic experiments showed that all four mutants contained two minor slow refolding phases with characteristics of proline isomerization. The specific behavior of the phases depended on the location of the disulfide bonds. The major unfolding/refolding phase for each of the 30-51 mutants was more than an order of magnitude slower than for Ala14/Ala38 or for BPTI in which the 14-38 disulfide bond was specifically reduced and blocked with iodoacetamide [Jullien, M., & Baldwin, R. L. (1981) J. Mol. Biol. 145, 265-280]. Since this effect is independent of the stability of the protein, it is consistent with a model in which the proper docking of the interior residues of the protein is the rate-limiting step in the folding of these mutants.     

Transition state in the folding of alpha-lactalbumin probed by the 6-120 disulfide bond.

The guanidine hydrochloride concentration dependence of the folding and unfolding rate constants of a derivative of alpha-lactalbumin, in which the 6-120 disulfide bond is selectively reduced and S-carboxymethylated, was measured and compared with that of disulfide-intact alpha-lactalbumin. The concentration dependence of the folding and unfolding rate constants was analyzed on the basis of the two alternative models, the intermediate-controlled folding model and the multiple-pathway folding model, that we had proposed previously. All of the data supported the multiple-pathway folding model. Therefore, the molten globule state that accumulates at an early stage of folding of alpha-lactalbumin is not an obligatory intermediate. The cleavage of the 6-120 disulfide bond resulted in acceleration of unfolding without changing the refolding rate, indicating that the loop closed by the 6-120 disulfide bond is unfolded in the transition state. It is theoretically shown that the chain entropy gain on removing the cross-link from a random coil chain with helical stretches can be comparable to that from an entirely random chain. Therefore, the present result is not inconsistent with the known structure in the molten globule intermediate. Based on this result and other knowledge obtained so far, the structure in the transition state of the folding reaction of alpha-lactalbumin is discussed.     

Partial proteolysis as a probe of the conformation of the gamma subunit in activated soluble and membrane-bound chloroplast coupling factor 1

Treatments that enhance the latent ATPase activity of the chloroplast coupling factor (CF1) also induce hypersensitivity of the gamma subunit toward trypsin. A number of different gamma subunit cleavage products are formed (Moroney, J. V., and McCarty, R. E. (1982) J. Biol. Chem. 257, 5910-5914). We have compared the gamma cleavage products of membrane-bound and isolated CF1, activated either by reduction of the gamma disulfide bond or by removal of the epsilon subunit. The gamma subunit of isolated CF1 lacking the epsilon subunit was cleaved to a 27,000-Da species. The same cleavage site became exposed following energy-dependent conformational changes in the membrane-bound enzyme. Activation by reduction of the gamma disulfide bond also exposed this site. However, the gamma subunit of reduced CF1 was cleaved rapidly at an additional site and trypsin treatment gave rise to a 25,000-Da gamma species. The small peptide generated by the second cleavage contains one of the cysteinyl residues of the reduced disulfide bridge of gamma. This peptide dissociates from the enzyme and can be isolated by gel filtration. The close proximity of the trypsin cleavage sites to the disulfide bond of gamma is discussed with respect to the effects of tryptic cleavage on the ATPase activity of CF1. The data indicate that structural changes in a limited region of the gamma subunit strongly influence the catalytic properties of both soluble and membrane-bound CF1.