Detection of new amino acid sequences of alamethicins F30 by nonaqueous capillary electrophoresis-mass spectrometry.

The microheterogeneous alamethicin F30 (ALM F30) isolated from the fermentation of Trichoderma viride strain NRRL 3199 was analyzed by nonaqueous capillary electrophoresis coupled to electrospray ion-trap mass spectrometry (ESI-IT-MS) and electrospray time-of-flight mass spectrometry (ESI-TOF-MS). Tandem ESI-IT-MS was used for elucidation of the amino acid sequence based on the fragmentation pattern of selected parent ions. The MS/MS spectra using the [M + 3H](3+) or [M + 2H](2+) ions as precursor ions displayed the respective b- and the y-type fragments resulting from cleavage of the particularly labile Aib-Pro bond. The MS(3) of these fragments generated the b acylium ion series, as well as internal fragment ion series. Eleven amino acid sequences were identified, characterized by the exchange of Ala to Aib in position 6, Gln to Glu in positions 7 or 19 as well as the loss of the C-terminal amino alcohol. In addition, two truncated pyroglutamyl peptaibols were found. Overall, seven new sequences are reported compared to earlier LC-MS studies. The composition of the components was confirmed by on-line ESI-TOF-MS detection. Mass accuracy well below 5 ppm was observed. Quantification of the individual components was achieved by a combination of UV and TOF-MS detection.     

Total synthesis in solution of alamethicin F50/5 by an easily tunable segment condensation approach

A total synthesis in solution of the 19-mer peptide component F50/5 of alamethicin, the most extensively investigated among the channel-former peptaibol antibiotics, is reported. Three peptide segments (A, B, C) were prepared and assembled, followed by incorporation of the acetylated N-terminal amino acid. The synthetic modules B and C are characterized by three Glu(OMe) residues (at positions 7, 18, and 19) that, after completion of the synthesis, were reacted with ammonia to provide alamethicin F50/5. By use of this general strategy, we also prepared the [Gln7, Glu(OMe)18,19] alamethicin F50/5 analogue. The purity and conformation of the final products were assessed by chromatographic, spectrometric, and spectroscopic techniques. This tunable segment condensation approach will pave the way for an easy synthesis of alamethicin analogues bearing amino acid residues with desired side-chain probes even at the N-terminus and in internal positions of the sequence.     

Pore-forming properties of alamethicin F50/5 inserted in a biological membrane

The pore-forming properties of native and synthetic alamethicins were investigated in photoreceptor rod outer segments (OS) isolated from frog retina, and recorded in whole-cell configuration. The peptaibols were applied (and removed) to (from) the OS within less than 50 ms by means of a computer-controlled micro-perfusion system. Once blocked with light, the main OS endogenous conductance, the OS membrane resistance was >1 GOmega, allowing low-noise and high-resolution recordings. Currents of ca. 700 pA were recorded in symmetric K(+) (100 mM) and Ca(2+) (1 mM), upon applying 1 microM of alamethicin F50/5 or its [L-Glu(OMe)(7,18,19)] analogue to the OS membrane (clamped at -20 mV). In the latter peptide, the Gln residues at positions 7, 18, and 19 were substituted with side-chain esterified Glu residues. For both peptides, the current activated exponentially, with a delay from peptide application, and exponentially returned to zero without any delay, upon removing the peptide from the external solution. The delay as well as the activation (tau(a)) and deactivation (tau(d)) time constants of the current produced by the modified alamethicin were much slower, and the current noise was much larger, with respect to the corresponding values for alamethicin F50/5. Therefore, the above three Gln residues are not a key factor for pore formation, but the [L-Glu(OMe)(7,18,19)] analogue produces larger pores with a lower probability of formation.     

Interaction of bundled Ser-rich amphiphilic peptides with phospholipid membranes.

To investigate properties of hydrophilic bundled peptides and their interactions with phospholipid membranes, bundled peptides named [Trp2]- and [Trp12]-4alpha-46S9, which are composed of four fragments of amphiphilic 24-mer peptide, were designed and synthesized. Tryptophan (Trp) was introduced at the 2nd position from the N-terminal or at the centre (12th) of the helix to monitor the peptide-lipid interaction. Circular dichroism measurements indicated that the peptides had low alpha-helicities in a buffer solution (pH 7.4) and also in the presence of dipalmitoyl-DL-3-phosphatidylcholine (DPPC) vesicles. In the presence of DPPC/dipalmitoyl-DL-3-phosphatidylglycerol (DPPG) (3:1) vesicles, the measurement could not be taken because of turbidity induced by vesicle aggregation. Both peptides had moderate perturbation activity for both the neutral and acidic vesicles at 25 degrees C. The perturbation patterns at 50 degrees C were much different from those at 25 degrees C and the maximum activity reached 100% at a low peptide concentration. The results of the measurement of membrane fusion activity of peptides showed a similar tendency to that found in the perturbation experiment. A quenching experiment indicated that the Trp2 and Trp12 residues in [Trp2]- and [Trp12]-4alpha-46S9 were scarcely embedded in neutral lipid membranes.     

Sequences of polypeptide antibiotics stilboflavins, natural peptaibol libraries of the mold Stilbella flavipes.

From the culture broths of the mold Stilbella flavipes CBS 146.81, a mixture of polypeptides could be isolated by adsorption on XAD polystyrene resin and purified by Sephadex LH-20 chromatography. Using preparative thin-layer chromatography (TLC) three groups of peptides, named stilboflavins (SF) A, B, and C could be separated. Each of the groups showed microheterogeneity when investigated by high-performance liquid chromatography (HPLC). Employing on-line HPLC-electrospray ionization tandem mass spectrometry in the positive and negative ionization mode, together with gas chromatography-selected ion monitoring mass spectrometry, enantioselective GC and quantitative amino acid analysis, the sequences of stilboflavins A and B could be determined. Exchange of Glu in stilboflavins A peptides (acidic) against Gln in stilboflavins B peptides (neutral) is the rational for different polarity of the peptide groups and their separatability by TLC. Since SF A and B are bioactive N-acetylated 20-residue peptides with a high proportion of alpha-aminoisobutyric acid and C-terminal bonded amino alcohols (either leucinol, isoleucinol or valinol) the peptides belong to the group of peptaibol antibiotics.     

Separation of 17 DL-amino acids and chiral sequential analysis of peptides by reversed-phase liquid chromatography after labeling with R(-)-4- (3-isothiocyanatopyrrolidin-1-yl)-7-(N, N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole

Seventeen DL-amino acids labeled with a fluorescent chiral labeling reagent, R(-)-4-(3-isothiocyanatopyrrolidin-1-yl)-7-(N, N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole (R(-)-DBD-PyNCS), were separated by reversed-phase chromatography and detected fluorometrically at 550 nm (excitation at 460 nm). The reagent reacted with amino functional group in dl-amino acids under basic medium. The thiocarbamoyl derivatives were converted to thiohydantoin via thiazolinone in trifluoroacetic acid (TFA) solution. The epimerization ratios during the reaction of the cyclization were less than 37% in all dl-amino acids tested. The resulting thiohydantoin derivatives of individual dl-amino acids were completely separated with isocratic elutions using acidic mobile phase involving 0.1% TFA. The separations of the thiohydantoins yielded from acidic, basic, neutral, hydroxyl, and aromatic amino acids were good enough for the identification of dl-amino acid. The method using the reagent was adopted to identification of dl-amino acid sequences in eight peptides. The separation and identification of the thiohydantoin derivatives liberated from the peptides labeled were performed by the isocratic elutions. The applicability of the proposed procedure to sequential analysis of peptide was demonstrated with [D-Ala(2)]-leucine enkephalin, [D-Ala(2)]-deltorphin II, d-Phe-Met-Arg-Phe-amide, and Phe-D-Met-Arg-Phe-amide. D-Ala, D-Phe, and D-Met in the peptides were positively identified with the proposed procedures. [L-Ala(2)]-leucine enkephalin, beta-lipotropin, Asp-Ser-Asp-Pro-Arg, and Pro-Asp-Val-Asp-His-Val-Phe-Leu-Arg-Phe-amide were also analyzed as the references without D-amino acid.     

Synthesis and conformation of a polyoxyethylene-bound undecapeptide of the alamethicin helix and (2-methylalanyl-L-alanine)1–7

The stepwise synthesis and conformational studies of the N-terminal helical partial sequence of the membrane-modifying polypeptide antibiotic alamethicin are described. The polyoxyethylen esters of the fragments N-t-Boc-L -Pro-Aib-Ala-Gln-Aib-Val-Aib-Gly-OH and N-Ac-Aib-L -Pro-Aib-Ala-Aib-Ala-Gln-Aib-Val-Aib-Gly-OH are synthesized using polyoxyethylene (molecular mass 10,000) as solubilizing support. CD spectra of each intermediate in ethanol show α-helix formation of the N-protected peptide polymers beginning with the nonapeptide and of the N-protonated sequences beginning with the decapeptide. Compared to the helix of alamethicin, temperature- and solvent-dependent CD measurements indicate analogous conformational behavior. The results suggest that in lipophilic media the alamethicin helix can extend the full length of the partial sequence between the two proline residues and that aqueous media favor an increase of random-coil conformation. For model studies of the particular lipid interaction of alamethicin, the stepwise synthesis of peptides with the alternating (Aib-L -Ala)_n sequence (n = 1–7) was carried out on a polyoxyethylene support (molecular mass 6000). CD and ORD studies in ethanol showed a change from the random coil to a right-handed α-helix with increasing peptide length. This change is observed for the N-protected peptides at a chain length of 8 residues and for the N-protonated peptides at a length of 9 residues. The comparison of the CD data of free and polyoxyethylene-bound peptides revealed that the solubilizing polymeric support cannot induce conformational changes. The intensities of the CD bands of t-Boc-(Aib-L -Ala)_n-OPOE (n ≥ 6) are higher than those of alamethicin, and these model peptides show similar temperature and solvent inducible changes of their helix contents.     

Effects of polycations on ion channels formed by neutral and negatively charged alamethicins

The effects of the peptide polycations salmon protamine (M _r = 4332,z = + 21) and poly-l-lysine (M _r 100,00,z + 775) on ion channels formed by synthetic alamethicin Alm-F30 (one negative charge), natural Alm-F50 (neutral) and phosphorylated Alm-F50 (two negative charges) reconstituted in planar lipid bilayers have been studied at the single channel level. It was observed that both polycations in micromolar concentrations transiently block ion permeation through the channels formed by each alamethicin analogue, although in case of the neutral Alm-F50 to a significantly lesser extent. Poly-l-lysine showed to be more effective than protamine in blocking these channels. If either polycation is present in the cis-compartment, blockade occurs only at cis positive membrane voltages. At constant polycation concentration, dwell times in the blocked state increase when salt concentration is lowered, and decrease at acidic pH with an apparent pK of 4.8. Mean lifetime of blockade events shortens when membrane voltage is increased, which suggests that both polycations may permeate through the oligomeric alamethicin channels if conductance levels are > 2. We suggest that blockade is caused by electrostatic binding of a single polycation molecule to the C-terminal channel mouth; in case of Alm-F30, Glu18 has to be considered as the putative binding site. Our results provide further evidence for the barrel-stave model and a parallel orientation of dipole monomers in the channel aggregate, the C-termini facing the membrane side with the more positive membrane potential.     

A peptide mapping technique--a three map system.

A high resolution peptide mapping system has been described. The method utilizes three maps for separation of the acidic, basic, and neutral constituents of a proteolytic digest of a protein. Peptides from a proteolytic digest are separated by electrophoresis at pH 6.5 into acidic, basic, and neutral peptides. The secondddimensional electrophoresis is performed at pH 2.1 for each of acidic peptides and basic peptides. The third map is prepared from the neutral peptides. For this map, paper chromatography was used for the first dimension and electrophoresis at pH 2.1 for the second dimension.     

Chimeric synthetic peptides containing two immunodominant epitopes from the envelope gp46 and the transmembrane gp21 glycoproteins of HTLV-I virus.

Two chimeric synthetic peptides incorporating immunodominant sequences from HTLV-I virus were synthesized. Monomeric peptides P7 and P8 represent sequences from transmembrane protein (gp21) and envelope protein (gp46) of the virus. The peptide P7 is a gp21 (374-400) sequence and the peptide P8 is a gp46 (190-207) sequence. Those peptides were arranged in a way that permits one to obtain different combinations of chimeric peptides (P7-GG-P8 and P8-GG-P7), separated by two glycine residues as spacer arms. The antigenic activity of these peptides were evaluated by UltramicroEnzyme-linked immunosorbent assay (UMELISA) by using panels of anti-HTLV-I-positive sera (n = 22), anti-HTLV-I/II-positive sera (n = 2), HTLV-positive (untypeable) serum samples (n = 2), and anti-HTLV-II-positive sera (n = 11), while specificity was evaluated with anti-HIV-positive samples (n = 19) and samples from healthy blood donors (n = 30). The efficacy of the chimeric peptides in solid-phase immunoassays was compared with the monomeric peptides and monomeric peptides together. The chimeric peptide P7-GG-P8 proved to be the most reactive with anti-HTLV-I-positive sera. These results may be related to a higher peptide adsorption capacity to the solid surface and for epitope accessibility to the antibodies. This chimeric peptide would be very useful for HTLV-I diagnostics.     

Major antigenic determinants of F and ColB2 pili.

F-like conjugative pili are expressed by plasmids with closely related transfer systems. They are tubular filaments that are composed of repeating pilin subunits arranged in a helical array. Both F and ColB2 pilin have nearly identical protein sequences, and both contain an acetylated amino-terminal alanine residue. However, they differ by a few amino acid residues at their amino termini. Rabbit antisera raised against purified F and ColB2 pili are immunologically cross-reactive by only 25%, as measured by a competition enzyme-linked immunosorbent assay (ELISA). A tryptic peptide corresponding to the first 15 amino acid residues of ColB2 pilin was isolated and found to remove nearly 80% of ColB2 pilus-directed rabbit antibodies. The corresponding tryptic peptide from F pilin, which reacted with anti-F pilus antibodies to remove 80%, was less than 20% reactive with anti-ColB2 pilus antiserum. Cleavage of these peptides with cyanogen bromide (at a methionine residue approximately in the middle of the peptide) did not affect the antigenicity of these peptides. Synthetic N alpha-acetylated peptides corresponding to the first eight amino acids of F pilin (Ac-Ala-Gly-Ser-Ser-Gly-Gln-Asp-Leu-COOH) and the first six amino acids of ColB2 pilin (Ac-Ala-Gln-Gly-Gln-Asp-Leu-COOH) were prepared and tested by competition ELISA with homologous and heterologous anti-pilus antisera. The F peptide F(1-8) inhibited the interaction of F pili and anti-F pilus antiserum to 80%, while the ColB2 peptide ColB2(1-6) inhibited anti-ColB2 pilus antiserum reacting with ColB2 pili by greater than 60%. The two peptides F(1-8) and ColB2(1-6) were inactive by competition ELISAs with heterologous antisera. These results suggest that the major antigenic determinant of both F and ColB2 pili is at the amino terminus of the pilin subunit and that 80% of antibodies raised against these pili are specific for this region of the pilin molecule.     

Supramolecular structure of self-assembling alamethicin analog studied by ESR and PELDOR

Three analogs of alamethicin F50/5, labelled with the TOAC (='2,2,6,6-tetramethylpiperidin-1-oxyl-4-amino-4-carboxylic acid') spin label at positions 1 (Alm1), 8 (Alm8), and 16 (Alm16), resp., were studied by Electron-Spin-Resonance (ESR) and Pulsed Electron-Electron Double-Resonance (PELDOR) techniques in solvents of different polarity to investigate the self-assembly of amphipathic helical peptides in membrane-mimicking environments. In polar solvents, alamethicin forms homogeneous solutions. In the weakly polar chloroform/toluene 1 : 1 mixture, however, this peptide forms aggregates that are detectable at 293 K by ESR in liquid solution, as well as by PELDOR in frozen, glassy solution at 77 K. In liquid solution, free alamethicin molecules and their aggregates show rotational-mobility correlation times tau(r) of 0.87 and 5.9 ns, resp. Based on these values and analysis of dipole-dipole interactions of the TOAC labels in the aggregates, as determined by PELDOR, the average number N of alamethicin molecules in the aggregates is estimated to be less than nine. A distance-distribution function between spin labels in the supramolecular aggregate was obtained. This function exhibits two maxima: a broad one at a distance of 3.0 nm, and a wide one at a distance of ca. 7 nm. A molecular-dynamics (MD)-based model of the aggregate, consisting of two parallel tetramers, each composed of four molecules arranged in a 'head-to-tail' fashion, is proposed, accounting for the observed distances and their distribution.     

A novel technique to study pore-forming peptides in a natural membrane

The biophysical characteristics and the pore formation dynamics of synthetic or naturally occurring peptides forming membrane-spanning channels were investigated by using isolated photoreceptor rod outer segments (OS) recorded in whole-cell configuration. Once blocking the two OS endogenous conductances (the cGMP channels by light and the Na⁺:Ca²⁺,K⁺ exchanger by removing one of the transported ion species from both sides of the membrane, i.e. K⁺, Na⁺ or Ca²⁺), the OS membrane resistance (R _m ) was typically larger than 1 GΩ in the presence of 1 mM external Ca²⁺. Therefore, any exogenous current could be studied down to the single channel level. The peptides were applied to (and removed from) the extracellular OS side in ∼50 ms with a computer-controlled microperfusion system, in which every perfusion parameter, as the rate of solution flow, the temporal sequence of solution changes or the number of automatic, self-washing cycles were controlled by a user-friendly interface. This technique was then used to determine the biophysical properties and the pore formation dynamics of antibiotic peptaibols, as the native alamethicin mixture, the synthesized major component of the neutral fraction (F50/5) of alamethicin, and the synthetic trichogin GA IV.     

Lipid chain-length dependence for incorporation of alamethicin in membranes: electron paramagnetic resonance studies on TOAC-spin labeled analogs

Alamethicin is a 19-residue hydrophobic peptide, which is extended by a C-terminal phenylalaninol but lacks residues that might anchor the ends of the peptide at the lipid-water interface. Voltage-dependent ion channels formed by alamethicin depend strongly in their characteristics on chain length of the host lipid membranes. EPR spectroscopy is used to investigate the dependence on lipid chain length of the incorporation of spin-labeled alamethicin in phosphatidylcholine bilayer membranes. The spin-label amino acid TOAC is substituted at residue positions n = 1, 8, or 16 in the sequence of alamethicin F50/5 [TOAC(n), Glu(OMe)(7,18,19)]. Polarity-dependent isotropic hyperfine couplings of the three TOAC derivatives indicate that alamethicin assumes approximately the same location, relative to the membrane midplane, in fluid diC(N)PtdCho bilayers with chain lengths ranging from N = 10-18. Residue TOAC(8) is situated closest to the bilayer midplane, whereas TOAC(16) is located farther from the midplane in the hydrophobic core of the opposing lipid leaflet, and TOAC(1) remains in the lipid polar headgroup region. Orientational order parameters indicate that the tilt of alamethicin relative to the membrane normal is relatively small, even at high temperatures in the fluid phase, and increases rather slowly with decreasing chain length (from 13 degrees to 23 degrees for N = 18 and 10, respectively, at 75 degrees C). This is insufficient for alamethicin to achieve hydrophobic matching. Alamethicin differs in its mode of incorporation from other helical peptides for which transmembrane orientation has been determined as a function of lipid chain length.     

Paramyxovirus F1 protein has two fusion peptides: implications for the mechanism of membrane fusion

Viral fusion proteins contain a highly hydrophobic segment, named the fusion peptide, which is thought to be responsible for the merging of the cellular and viral membranes. Paramyxoviruses are believed to contain a single fusion peptide at the N terminus of the F1 protein. However, here we identified an additional internal segment in the Sendai virus F1 protein (amino acids 214-226) highly homologous to the fusion peptides of HIV-1 and RSV. A synthetic peptide, which includes this region, was found to induce membrane fusion of large unilamellar vesicles, at concentrations where the known N-terminal fusion peptide is not effective. A scrambled peptide as well as several peptides from other regions of the F1 protein, which strongly bind to membranes, are not fusogenic. The functional and structural characterization of this active segment suggest that the F1 protein has an additional internal fusion peptide that could participate in the actual fusion event. The presence of homologous regions in other members of the same family suggests that the concerted action of two fusion peptides, one N-terminal and the other internal, is a general feature of paramyxoviruses.     

Total syntheses in solution of TOAC-labelled alamethicin F50/5 analogues

Total syntheses in solution of a set of four selected analogues of the 19-mer component F50/5 of alamethicin, the most extensively studied among the channel-former peptaibol antibiotics, are planned and reported. All analogues bear three Glu(OMe) residues, replacing the Gln residues at positions 7, 18, and 19 of the naturally occurring compound. Three analogues are mono-labelled with the free-radical-containing amino acid residue TOAC at the strategic positions 1, 8, or 16. The fourth analogue is bis-labelled with the same EPR-active residue at both positions 1 and 16. In the native sequence, all of the positions where TOAC replacements have been introduced are characterized by residues of Aib, the prototype of the class of helicogenic C(alpha)-tetrasubstituted alpha-amino acids. All of the TOAC analogues synthesized exhibit significant membrane-modifying properties.     

Voltage-dependent insertion of alamethicin at phospholipid/water and octane/water interfaces

Understanding the binding and insertion of peptides in lipid bilayers is a prerequisite for understanding phenomena such as antimicrobial activity and membrane-protein folding. We describe molecular dynamics simulations of the antimicrobial peptide alamethicin in lipid/water and octane/water environments, taking into account an external electric field to mimic the membrane potential. At cis-positive potentials, alamethicin does not insert into a phospholipid bilayer in 10 ns of simulation, due to the slow dynamics of the peptide and lipids. However, in octane N-terminal insertion occurs at field strengths from 0.33 V/nm and higher, in simulations of up to 100 ns duration. Insertion of alamethicin occurs in two steps, corresponding to desolvation of the Gln7 side chain, and the backbone of Aib10 and Gly11. The proline induced helix kink angle does not change significantly during insertion. Polyalanine and alamethicin form stable helices both when inserted in octane and at the water/octane interface, where they partition in the same location. In water, both polyalanine and alamethicin partially unfold in multiple simulations. We present a detailed analysis of the insertion of alamethicin into the octane slab and the influence of the external field on the peptide structure. Our findings give new insight into the mechanism of channel formation by alamethicin and the structure and dynamics of membrane-associated helices.     

TOAC spin labels in the backbone of alamethicin: EPR studies in lipid membranes

Alamethicin is a 19-amino-acid residue hydrophobic peptide that produces voltage-dependent ion channels in membranes. Analogues of the Glu(OMe)(7,18,19) variant of alamethicin F50/5 that are rigidly spin-labeled in the peptide backbone have been synthesized by replacing residue 1, 8, or 16 with 2,2,6,6-tetramethyl-piperidine-1-oxyl-4-amino-4-carboxyl (TOAC), a helicogenic nitroxyl amino acid. Conventional electron paramagnetic resonance spectra are used to determine the insertion and orientation of the TOAC(n) alamethicins in fluid lipid bilayer membranes of dimyristoyl phosphatidylcholine. Isotropic (14)N-hyperfine couplings indicate that TOAC(8) and TOAC(16) are situated in the hydrophobic core of the membrane, whereas the TOAC(1) label resides closer to the membrane surface. Anisotropic hyperfine splittings show that alamethicin is highly ordered in the fluid membranes. Experiments with aligned membranes demonstrate that the principal diffusion axis lies close to the membrane normal, corresponding to a transmembrane orientation. Combination of data from the three spin-labeled positions yields both the dynamic order parameter of the peptide backbone and the intramolecular orientations of the TOAC groups. The latter are compared with x-ray diffraction results from alamethicin crystals. Saturation transfer electron paramagnetic resonance, which is sensitive to microsecond rotational motion, reveals that overall rotation of alamethicin is fast in fluid membranes, with effective correlation times <30 ns. Thus, alamethicin does not form large stable aggregates in fluid membranes, and ionic conductance must arise from transient or voltage-induced associations.     

Morphological behavior of acidic and neutral liposomes induced by basic amphiphilic alpha-helical peptides with systematically varied hydrophobic-hydrophilic balance

Lipid-peptide interaction has been investigated using cationic amphiphilic alpha-helical peptides and systematically varying their hydrophobic-hydrophilic balance (HHB). The influence of the peptides on neutral and acidic liposomes was examined by 1) Trp fluorescence quenched by brominated phospholipid, 2) membrane-clearing ability, 3) size determination of liposomes by dynamic light scattering, 4) morphological observation by electron microscopy, and 5) ability to form planar lipid bilayers from channels. The peptides examined consist of hydrophobic Leu and hydrophilic Lys residues with ratios 13:5, 11:7, 9:9, 7:11, and 5:13 (abbreviated as Hels 13-5, 11-7, 9-9, 7-11, and 5-13, respectively; Kiyota, T., S. Lee, and G. Sugihara. 1996. Biochemistry. 35:13196-13204). The most hydrophobic peptide (Hel 13-5) induced a twisted ribbon-like fibril structure for egg PC liposomes. In a 3/1 (egg PC/egg PG) lipid mixture, Hel 13-5 addition caused fusion of the liposomes. Hel 13-5 formed ion channels in neutral lipid bilayer (egg PE/egg PC = 7/3) at low peptide concentrations, but not in an acidic bilayer (egg PE/brain PS = 7/3). The peptides with hydrophobicity less than Hel 13-5 (Hels 11-7 and Hel 9-9) were able to partially immerse their hydrophobic part of the amphiphilic helix in lipid bilayers and fragment liposome to small bicelles or micelles, and then the bicelles aggregated to form a larger assembly. Peptides Hel 11-7 and Hel 9-9 each formed strong ion channels. Peptides (Hel 7-11 and Hel 5-13) with a more hydrophilic HHB interacted with an acidic lipid bilayer by charge interaction, in which the former immerses the hydrophobic part in lipid bilayer, and the latter did not immerse, and formed large assemblies by aggregation of original liposomes. The present study clearly showed that hydrophobic-hydrophilic balance of a peptide is a crucial factor in understanding lipid-peptide interactions.     

Peptide Aggregation and Pore Formation in a Lipid Bilayer: A Combined Coarse-Grained and All Atom Molecular Dynamics Study

We present a simulation study where different resolutions, namely coarse-grained (CG) and all-atom (AA) molecular dynamics simulations, are used sequentially to combine the long timescale reachable by CG simulations with the high resolution of AA simulations, to describe the complete processes of peptide aggregation and pore formation by alamethicin peptides in a hydrated lipid bilayer. In the 1-μs CG simulations the peptides spontaneously aggregate in the lipid bilayer and exhibit occasional transitions between the membrane-spanning and the surface-bound configurations. One of the CG systems at t = 1 μs is reverted to an AA representation and subjected to AA simulation for 50 ns, during which water molecules penetrate the lipid bilayer through interactions with the peptide aggregates, and the membrane starts leaking water. During the AA simulation significant deviations from the α-helical structure of the peptides are observed, however, the size and arrangement of the clusters are not affected within the studied time frame. Solid-state NMR experiments designed to match closely the setup used in the molecular dynamics simulations provide strong support for our finding that alamethicin peptides adopt a diverse set of configurations in a lipid bilayer, which is in sharp contrast to the prevailing view of alamethicin oligomers formed by perfectly aligned helical alamethicin peptides in a lipid bilayer.