Orthogonal protecting groups for N(alpha)-amino and C-terminal carboxyl functions in solid-phase peptide synthesis

For the controlled synthesis of even the simplest dipeptide, the N(alpha)-amino group of one of the amino acids and the C-terminal carboxyl group of the other should both be blocked with suitable protecting groups. Formation of the desired amide bond can now occur upon activation of the free carboxyl group. After coupling, peptide synthesis can be continued by removal of either of the two protecting groups and coupling with the free C-terminus or N(alpha)-amino group of another protected amino acid. When three functional amino acids are present in the sequence, the side chain of these residues also has to be protected. It is important that there is a high degree of compatibility between the different types of protecting groups such that one type may be removed selectively in the presence of the others. At the end of the synthesis, the protecting groups must be removed to give the desired peptide. Thus, it is clear that the protection scheme adopted is of the utmost importance and makes the difference between success and failure in a given synthesis. Since R. B. Merrifield introduced the solid-phase strategy for the synthesis of peptides, this prerequisite has been readily accepted. This strategy is usually carried out using two main protection schemes: the tert-butoxycarbonyl/benzyl and the 9-flourenylmethoxycarbonyl/tert-butyl methods. However, for the solid-phase preparation of complex or fragile peptides, as well as for the construction of libraries of peptides or small molecules using a combinatorial approach, a range of other protecting groups is also needed. This review summarizes other protecting groups for both the N(alpha)-amino and C-terminal carboxyl functions.     

Application of arylsulphonyl side-chain protected arginines in solid-phase peptide synthesis based on 9-fluorenylmethoxycarbonyl amino protecting strategy.

One of the main problems still hampering solid-phase peptide synthesis using orthogonal protection strategies based on the 9-fluorenylmethoxycarbonyl amino protecting group is the difficult removal of currently used arginine arylsulphonyl guanidino protecting groups. Poor acid liability of 4-methoxy-2,3,6-trimethylbenzenesulphonyl-protected arginine has led to the popularity of the newer 2,2,5,7,8- pentamethylchroman-6-sulphonyl guanidino protecting group. This group was initially believed to have liability to trifluoroacetic acid, the reagent commonly used to simultaneously deprotect peptides and detach them from the synthesis resin, comparable to tert.-butyl and trityl type protecting groups used for the protection of other peptide side-chain functionalities. In a comparison of three established cleavage/deprotection mixtures we have shown that this is not always the case, particularly in multiple arginine peptides. We have found that only hard-acid deprotection with trimethylsilyl bromide reliably removed both arylsulphonyl guanidino protecting groups from a variety of arginine-containing peptides.     

A Dde resin based strategy for inverse solid-phase synthesis of amino terminated peptides, peptide mimetics and protected peptide intermediates.

This report describes a Dde resin based attachment strategy for inverse solid-phase peptide synthesis (ISPPS). This attachment strategy can be used for the synthesis of amino terminated peptides with side chains and the carboxyl terminus either protected or deprotected. Amino acid t-butyl esters were attached through their free amino group to the Dde resin. The t-butyl carboxyl protecting group was removed by 50% TFA, and inverse peptide synthesis cycles performed using an HATU/TMP based coupling method. Protected peptides were cleaved from the resin with dilute hydrazine. Side chain protecting groups could then be removed by treatment with TFMSA/TFA. The potential of this approach was demonstrated by the synthesis of several short protected and unprotected peptides in good yield and with low epimerization. Its potential for peptide mimetic synthesis was demonstrated by the synthesis of two peptide trifluoromethylketones.     

Synthesis of peptide aldehydes.

The functionalization of peptides and proteins by aldehyde groups has become the subject of intensive research since the discovery of the inhibition properties of peptide aldehydes towards various enzymes. Furthermore, peptide aldehydes are of great interest for peptide backbone modification or ligation reactions. This review focuses upon their synthesis, which has been developed following two main strategies. The first strategy consists of prior synthesis of the peptide, followed by the introduction of the aldehyde function. The second possible strategy uses alpha-amino aldehydes as starting materials. After protection of the aldehyde, peptide elongation occurs. At the end of the synthesis, the aldehyde function can be unmasked.     

Ninhydrin as a reversible protecting group of amino-terminal cysteine.

The proximity of the alpha-amine and beta-thiol of alpha-amino terminal-cysteine (NT-Cys) residues in peptides imparts unique chemical properties that have been exploited for inter- and intra-molecular ligation of unprotected peptides obtained through both synthetic and biological means. A reversible protecting group orthogonal to other protection strategies and reversible under mild conditions would be useful in simplifying the synthesis, cleavage, purification and handling of such NT-Cys peptides. It could also be useful for the sequential ligation of peptides. To this end, we explored tri-one chemistry and found that ninhydrin (indane-1,2,3 trione) reacted readily with cysteine or an NT-Cys-containing peptide on- or off-resin at pH 2-5 to form Ninhydrin-protected Cys (Nin-Cys) as a thiazolidine (Thz). The Thz ring, protecting both the amino and thiol groups in Nin-Cys, completely avoids the formylation and Thz side reactions found during hydrofluoric acid (HF) cleavage when N-pi-benzyloxymethyl histidine groups are present. Nin-Cys is stable during coupling reactions and various cleavage conditions with trifluoroacetic acid or HF, but is deprotected under thiolytic or reducing conditions. These properties enable a facile one-step deprotection and end-to-end-cyclization reaction of Nin-Cys peptides containing C-terminal thioesters.     

Some Mechanistic Aspects on Fmoc Solid Phase Peptide Synthesis

Peptides are biomolecules that may have several biological activities which makes them important to the environment in which they operate. Sometimes it is necessary for larger amounts of peptides to carry out some studies, like biological tests, NMR structural research or even interaction studies between peptides with other molecules. Expression can be an alternative for that. However, synthesis is specially useful when unnatural modifications or introduction of site specific tags are required. Synthetic peptides have been used for different studies such as cell signaling, development of epitope-specific antibodies, in cell-biology, biomarkers for diseases etc. Many different methodologies for peptide synthesis can be found in the literature. Solid phase peptide synthesis (SPPS) has been largely used and can be an excellent alternative to achieve larger quantities of these biomolecules. In this mini review, we aim to describe the SPPS and explain some of the mechanistic aspects and reagents involved in all phases of the synthesis: the use of resin, the ninhydrin test, some of the protecting groups, coupling reagents for peptide bond formation and the cleavage process.     

Microwave‐assisted cleavage of Alloc and Allyl Ester protecting groups in solid phase peptide synthesis

Orthogonal protection of amino acid side chains in solid phase peptide synthesis allows for selective deprotection of side chains and the formation of cyclic peptides on resin. Cyclizations are useful as they may improve the activity of the peptide or improve the metabolic stability of peptides in vivo. One cyclization method often used is the formation of a lactam bridge between an amine and a carboxylic acid. It is desirable to perform the cyclization on resin as opposed to in solution to avoid unwanted side reactions; therefore, a common strategy is to use –Alloc and –OAllyl protecting groups as they are compatible with Fmoc solid phase peptide synthesis conditions. Alloc and –OAllyl may be removed using Pd(PPh₃)₄ and phenylsilane in DMF. This method can be problematic as the reaction is most often performed at room temperature under argon gas. It is not usually done at higher temperatures because of the fear of poisoning the palladium catalyst. As a result, the reaction is long and reagent–intensive. Herein, we report the development of a method in which the –Alloc/–OAllyl groups are removed using a microwave synthesizer under atmospheric conditions. The reaction is much faster, allowing for the removal of the protecting groups before the catalyst is oxidized, as well as being less reagent–intensive. This method of deprotection was tested using a variety of amino acid sequences and side chain protecting groups, and it was found that after two 5‐min deprotections at 38°C, all –Alloc and –OAllyl groups were removed with >98% purity. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

The 4‐pyridylmethyl ester as a protecting group for glutamic and aspartic acids: ‘flipping’ peptide charge states for characterization by positive ion mode ESI‐MS

Use of the 4‐pyridylmethyl ester group for side‐chain protection of glutamic acid residues in solid‐phase peptide synthesis enables switching of the charge state of a peptide from negative to positive, thus making detection by positive ion mode ESI‐MS possible. The pyridylmethyl ester moiety is readily removed from peptides in high yield by hydrogenation. Combining the 4‐pyridylmethyl ester protecting group with benzyl ester protection reduces the number of the former needed to produce a net positive charge and allows for purification by RP HPLC. This protecting group is useful in the synthesis of highly acidic peptide sequences, which are often beset by problems with purification by standard RP HPLC and characterization by ESI‐MS. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Tandem Peptide Ligation for Synthetic and Natural Biologicals

We describe the concept and methods of peptide ligation and tandem peptide ligation for preparing synthetic and natural biologicals. Peptide ligation is a segment coupling method for free peptides or proteins through an amide bond without the use of a coupling reagent or a protecting group scheme. Because unprotected peptides or proteins prepared from either a chemical or biochemical source are being used as building blocks, the ligation removes the size limitation for peptide and protein synthesis. A key feature of the peptide ligation is that the coupling reaction is orthogonal, i.e. it is specific to a particular alpha-amino terminus (NT). This NT-amino acid-specific feature permits the development of a tandem peptide ligation method employing three unprotected peptide segments containing different NT-amino acids to form consecutively two amide bonds, an Xaa-SPro (thiaproline) and then an Xaa-Cys. This strategy was tested in peptides ranging from 28 to 70 amino acid residues, including analogues of somatostatins and two CC-chemokines MIP-1alpha and MIP-1beta. The thiaproline replacements in these peptides and proteins did not result in altered biological activity. By eliminating the protecting group scheme and coupling reagents, tandem ligation of multiple free peptide segments in aqueous solutions enhances the scope of protein synthesis and may provide a useful approach for preparing protein biologicals and synthetic vaccines.     

Conformation studies on oligoalanines, substance P, and the myoglobin sequence (66-73). Circular dichroism of polyethyleneglycol-bound peptides]

The conformation of polyethylene glycol-bound peptides, synthesized by the liquid-phase method, was investigated. This marcromolecular C-terminal protecting group is transparent in the visible and the ultraviolet range to 190 nm and solubilizes peptides in many different solvents. The CD spectra of the polymer-bound myoglobin sequence 66–73 and of the biologically active undecapeptide “substance P” were measured in each step of the synthesis. In both examples the formation of a secondary structure during the growth of the peptide chain was found. In the hydrophobic octapeptide containing the myoglobin sequence 66–73, the influence of either the blocked or the free N-terminal amino group on the conformation was observed. The blocked octapeptide in trifluoroethanol showed a higher degree of α-helix contribution than in its free state. The conformation of the polyethylene glycol-bound nona- and decaalanine in trifluoroethanol and water was determined. The peptide with a free amino end group has β-conformation in trifluoroethanol as well as in water. The corresponding N-Boc-protected derivatives show helical structure. The amino end group has a decisive influence on the formation of β-structure. The method of CD investigation of polymer-bound peptide sequences during the peptide synthesis in solution enables one to determine the influence of protecting groups and the chain end of a peptide on its conformation. It is also possible to study the relationship between the secondary structure, the chain length, and the kinetic of the coupling reaction in different solvents. Since the crystallization method for the liquid-phase peptide synthesis allows one to synthesize peptides in very short time, a new method of studying peptide conformations is opened.     

Simultaneous Post-cysteine(S-Acm) Group Removal Quenching of Iodine and Isolation of Peptide by One Step Ether Precipitation

The S-acetamidomethyl (Acm) protecting group is widely used in the chemical synthesis of peptides that contain one or more disulfide bonds. Treatment of peptides containing S-Acm protecting group with iodine results in simultaneous removal of the sulfhydryl protecting group and disulfide formation. However, the excess iodine needs to be quenched or adsorbed as quickly as possible after completion of the disulfide bond formation in order to minimize side reactions that are often associated with the iodination step. We report a simple method for simultaneous post-cysteine (Acm) group removal quenching of iodination and isolation. Use of large volumes of diethyl ether for direct precipitation action of the oxidized peptide from the 90 or 95% aqueous acetic acid solution affords nearly quantitative recovery of largely iodine-free peptide ready for direct purification. It was successfully applied to the synthesis of various peptides including human insulin-like peptide 3 analogues. Although recovery yields were comparable to the traditionally used ascorbic acid quenching method, this new approach offers significant advantages such as more simple utility, minimal side reactions, and greater cost effectiveness.     

Problems associated with use of the benzyloxymethyl protecting group for histidines. Formaldehyde adducts formed during cleavage by hydrogen fluoride

The use of N alpha-tert.-butyloxycarbonyl-N pi-benzyloxymethylhistidine in peptide synthesis resulted in significant levels of several different side products attributable to the generation of formaldehyde during the hydrogen fluoride cleavage reaction. Methylated impurities in a decapeptide were isolated and identified. These methylated impurities were attributed to the use of the benzyloxymethyl protecting group for the histidines, since the impurities did not form when the dinitrophenyl protecting group was used. Also, peptides containing benzyloxymethyl-protected histidines in addition to N-terminal cysteines quantitatively yielded their respective N-terminal thiazolidine derivatives upon isolation from standard hydrogen fluoride cleavage mixtures. Thiazolidine ring formation was circumvented by including in the cleavage reaction a formaldehyde scavenger such as cysteine hydrochloride or resorcinol.     

Combined solid-phase and solution approach for the synthesis of large peptides or proteins.

In the synthesis of large peptides or proteins, highly homogeneous segments are indispensable for a convergent strategy either on a solid-phase resin or in solution. Employing Boc/Bzl chemistry to prepare fully protected segments with a free alpha-carboxyl group from the solid support, base-labile linkers are profitable for practical peptide synthesis since they require no special equipment. For this purpose, an N-[9-(hydroxymethyl)-2-fluorenyl]succinamic acid (HMFS) linker was adopted. Consequently, there must be high compatibility between the protecting groups of the segment and the anchoring group which is cleavable by treatment with morpholine or piperidine in DMF. Instead of using the 2-bromobenzyloxycarbonyl (BrZ) group for the Tyr residue and the formyl (For) group for the Trp residue, both of which are the most susceptible protecting groups under these base-catalysed conditions, the base-resistant 3-pentyl (Pen) and cyclohexyloxycarbonyl (Hoc) groups were introduced to the respective side-chain functional groups. By applying the present strategy, the authors were able to rapidly synthesize homogeneous protected segments for use in the subsequent segment coupling in solution. In the present paper, the utility of the combined solid-phase and solution approach is demonstrated by synthesizing muscarinic toxin 1 (MTX1) which binds to the muscarinic acetylcholine receptors.     

Synthesis of ‘head‐to‐tail’ cyclized peptides on solid support using a chelating amide as new orthogonal protecting group

The synthesis of ‘head‐to‐tail’ cyclized peptides requires orthogonal protecting groups. Herein, we report on the introduction of bis(2‐pyridylmethyl)amine (Bpa) as a new protecting group for carboxylic functions in SPPS. The synthesis of the Bpa‐protected aspartic acid was straightforward, and its utility was investigated under standard peptide synthesis conditions. The new protecting group was cleaved in a very mild way using Cu(OAc)₂ and 2‐(trimethylsilyl)ethanol as nucleophile in a microwave oven without affecting other groups. Hence, the new group is ideally suited for the synthesis of ‘head‐to‐tail’ cyclic peptides, as demonstrated for a cyclic pentapeptide and cyclic hexapeptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of peptide gels for the investigation of oligopeptide-oligonucleotide interactions

Peptide gels usable as protein model systems have been synthesized by a cross-linking copolymerization of acryloyl substituted peptides with 1,4-tetramethylene dimethacrylate. A specially adapted approach to peptide synthesis allows the removal of the amino terminal Cbo group at the end of the peptide synthesis, followed by the introduction of an acryloyl group. The polymerizable peptide monomers obtained can be transferred into insoluble peptide gels by radical copoylmerization with cross-linking agents. After cleavage of the protecting groups of the side chains, these peptide gels can be used both as protein model systems for investigating peptide–oligonucleotide interaction and as sorbents for affinity chromatography. The preparation and characterization of the peptide gels Ala-Lys-Glu-Lys-Ala-OMe (I), Ala-Arg-Glu-Arg-Ala-OMe (II), Ala-Arg-Glu-Lys-Ala-OMe (III), and Ala-Arg-Ala-Lys-Ala-OMe (IV) as well as the conditions for the removal of the protecting groups is presented. Gel III contains the natural peptide sequence Arg-Glu-Lys while the other gels are analogs of this sequence.     

Peptide arrays on cellulose support: SPOT synthesis, a time and cost efficient method for synthesis of large numbers of peptides in a parallel and addressable fashion

Peptide synthesis on cellulose using SPOT technology allows the parallel synthesis of large numbers of addressable peptides in small amounts. In addition, the cost per peptide is less than 1% of peptides synthesized conventionally on resin. The SPOT method follows standard fluorenyl-methoxy-carbonyl chemistry on conventional cellulose sheets, and can utilize more than 600 different building blocks. The procedure involves three phases: preparation of the cellulose membrane, stepwise coupling of the amino acids and cleavage of the side-chain protection groups. If necessary, peptides can be cleaved from the membrane for assays performed using soluble peptides. These features make this method an excellent tool for screening large numbers of peptides for many different purposes. Potential applications range from simple binding assays, to more sophisticated enzyme assays and studies with living microbes or cells. The time required to complete the protocol depends on the number and length of the peptides. For example, 400 9-mer peptides can be synthesized within 6 days.     

Unexpected aspartimide formation during coupling reactions using Asp(OAl) in solid-phase peptide synthesis

Succinimide ring closure is a well-documented side reaction in the synthesis of certain Asp-containing peptides. This side reaction is typically acid- or base-catalyzed, and its occurrence during coupling reactions has not been previously noted. This unforeseen manifestation of aspartimide formation was detected while exploring a new strategy for side-chain to side-chain lactam formation on a solid support to synthesize cyclo[D-Asp2,Dap5]dynorphin A-(1–11) amide. The availability of allyl protecting groups, which provide an additional level of orthogonality in solid-phase peptide synthesis, was very appealing for use in preparing this conformationally constrained analogue. We found that the allyl ester (OAl) was not sufficient protection from this side reaction in this susceptible D-Asp2-Gly3 sequence. Remarkably, the aspartimide formation appeared to occur during the coupling reaction in the absence of base if excess coupling reagent was present.     

Fmoc-based chemical synthesis and selective binding to supercoiled DNA of the p53 C-terminal segment and its phosphorylated and acetylated derivatives.

The C-terminal domain of p53 comprises a linker, the tetramerization domain and the regulatory domain, and contains at least seven sites of potential post-translational modification. An improved strategy was developed for the synthesis of large peptides that contain phosphorylated amino acids and p53(303-393), a 91-amino acid peptide, and three post-translationally modified derivatives were synthesized through the sequential condensation of three partially protected segments. Peptide thiolesters were prepared using the sulfonamide-based 'safety-catch' resin approach and employing Fmoc-based solid-phase peptide synthesis. At the N-terminus of the middle building block, a photolabile protecting group, 3,4-dimethoxy-6-nitrobenzyloxycarbonyl, was incorporated to differentiate the N-terminal amino group from the side-chain amino groups. Two sequential couplings were accomplished following this protection strategy. The synthetic products, p53(303-393) and its phosphorylated or acetylated derivatives, exhibited the ability to bind specifically to supercoiled DNA, which is one of the characteristics of this domain.     

Solid-phase synthesis of a nucleopeptide from the linking site of adenovirus-2 nucleoprotein, -Ser(p5'CATCAT)-Gly-Asp-. Convergent versus stepwise strategy.

The synthesis of a nucleopeptide with the sequence -Ser(p5'CATCAT)-Gly-Asp- has been undertaken by either convergent or stepwise solid-phase strategies, both of which use base-labile permanent protecting groups. The coupling of phosphitylated protected peptides onto oligonucleotide-resins did not afford the desired nucleopeptide, which was nevertheless obtained after oligonucleotide elongation at the hydroxyl group of the resin-bound peptide and deprotection under mild basic conditions. A preliminary study on the stability of different nucleopeptides to bases is also reported.     

2,2′‐Dithiobis(5‐nitropyridine) (DTNP) as an effective and gentle deprotectant for common cysteine protecting groups

Of all the commercially available amino acid derivatives for solid phase peptide synthesis, none has a greater abundance of side‐chain protection diversity than cysteine. The high reactivity of the cysteine thiol necessitates its attenuation during peptide construction. Moreover, the propensity of cysteine residues within a peptide or protein sequence to form disulfide connectivity allows the opportunity for the peptide chemist to install these disulfides iteratively as a post‐synthetic manipulation through the judicious placement of orthogonal pairs of cysteine S‐protection within the peptide's architecture. It is important to continuously discover new vectors of deprotection for these different blocking protocols in order to achieve the highest degree of orthogonality between the removal of one species in the presence of another. We report here a complete investigation of the scope and limitations of the deprotective potential of 2,2′‐dithiobis(5‐nitropyridine) (DTNP) on a selection of commercially available Cys S‐protecting groups. The gentle conditions of DTNP in a TFA solvent system show a remarkable ability to deprotect some cysteine blocking functionality traditionally removable only by more harsh or forcing conditions. Beyond illustrating the deprotective ability of this reagent cocktail within a cysteine‐containing peptide sequence, the utility of this method was further demonstrated through iterative disulfide formation in oxytocin and apamin test peptides. It is shown that this methodology has high potential as a stand‐alone cysteine deprotection technique or in further manipulation of disulfide architecture within a more complex cysteine‐containing peptide template. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.