An oligonucleotide microarray for mouse imprinted genes profiling

Genomic imprinting is an epigenetic phenomenon unique to mammals that causes some genes to be expressed according to their parental origin. It results in developmental asymmetry in the function of the parental genomes. We describe here a method for the profiling of imprinted genes based on the development of a mouse imprinting microchip containing oligonucleotides corresponding to 493 genes, including most of the known imprinted genes (IG = 63), genes involved in epigenetic processes (EPI = 15), in metabolism (= 147), in obesity (= 10) and in neurotransmission (= 256) and housekeeping reference genes (= 2). This custom oligonucleotide microarray has been constructed to make data analysis and handling more manageable than pangenomic microarrays. As a proof of concept we present the differential expression of these 493 genes in different tissues (liver, placenta, embryo) of C57BL6/J mice fed different diets. Appropriate experimental strategies and statistical tools were defined at each step of the data analysis process with regard to the different sources of constraints. Data were confirmed by expression analyses based on quantitative real-time PCR. These oligochips should make it possible to increase our understanding of the involvement of imprinted genes in the timing of expression programs, tissue by tissue, stage by stage, in response to nutrients, lifestyles and other as yet unknown critical environmental factors in a variety of physiopathological situations, and in animals of different strains, ages and sexes. The use of oligonucleotides makes it possible to expand this microchip to include the increasing number of imprinted genes discovered.     

Hybridization kinetics analysis of an oligonucleotide microarray for microRNA detection

MicroRNA (miRNA) microarrays have been successfully used for profiling miRNA expression in many physiological processes such as development, differentiation, oncogenesis, and other disease processes. Detecting miRNA by miRNA microarray is actually based on nucleic acid hybridization between target molecules and their corresponding complementary probes. Due to the small size and high degree of similarity among miRNA sequences, the hybridization condition must be carefully optimized to get specific and reliable signals. Previously, we reported a microarray platform to detect miRNA expression. In this study, we evaluated the sensitivity and specificity of our microarray platform. After systematic analysis, we determined an optimized hybridization condition with high sensitivity and specificity for miRNA detection. Our results would be helpful for other hybridization-based miRNA detection methods, such as northern blot and nuclease protection assay.     

Development and validation of an oligonucleotide microarray for detection of multiple virulence and antimicrobial resistance genes in Escherichia coli

An oligonucleotide microarray detecting 189 Escherichia coli virulence genes or markers and 30 antimicrobial resistance genes was designed and validated using DNA from known reference strains. This microarray was confirmed to be a powerful diagnostic tool for monitoring emerging E. coli pathotypes and antimicrobial resistance, as well as for environmental, epidemiological, and phylogenetic studies including the evaluation of genome plasticity.     

An oligonucleotide microarray for microRNA expression analysis based on labeling RNA with quantum dot and nanogold probe

MicroRNAs (miRNAs) play important regulatory roles in animals and plants by targeting mRNAs for cleavage or translational repression. They have diverse expression patterns and might regulate various developmental and physiological processes. Profiling miRNA expression is very helpful for studying biological functions of miRNAs. We report a novel miRNA profiling microarray, in which miRNAs were directly labeled at the 3′ terminus with biotin and hybridized with complementary oligo-DNA probes immobilized on glass slides, and subsequently detected by measuring fluorescence of quantum dots labeled with streptavidin bound to miRNAs through streptavidin–biotin interaction. The detection limit of this microarray for miRNA was ~0.4 fmol, and the detection dynamic range spanned about 2 orders of magnitude. We made a model microarray to profile 11 miRNAs from leaf and root of rice (Oryza sativa L. ssp. indica) seedlings. The analysis results of the miRNAs had a good reproducibility and were consistent with the northern blot result. To avoid using high-cost detection equipment, colorimetric detection, a method based on nanogold probe coupled with silver enhancement, was also successfully introduced into miRNA profiling microarray detection.     

An oligonucleotide microarray bait for isolation of target gene fragments

A new molecular-baiting method was studied by retrieving targeted gene fragments from an oligonucleotide microarray bait after hybridization. To make the microarray bait, 70-mer oligonucleotides that were designed to specifically represent the SSA1 gene of Saccharomyces cerevisiae were printed on the slide. Samples of the Saccharomyces cerevisiae mRNA were extracted and labeled by the RD-PCR (Restriction Display PCR) method using the Cy5-labelled universal primer, then applied for hybridization. The sample fragments that hybridized to the microarray were stripped, and the eluted cDNAs were retrieved and cloned into the pMD 18-T vector for transformation, plasmid preparation, and sequencing. BLAST searching of the GenBank database identified the retrieved fragments as being identical to the SSA1 gene (from 2057-2541bp). A new method is being established that can retrieve the sample fragments using an oligo-microarray-bait.     

Development of an oligonucleotide microarray for the detection and monitoring of marine dinoflagellates

Harmful Algal Blooms (HABs), mainly caused by dinoflagellates and diatoms, have great economic and sanitary implications. An important contribution for the comprehension of HAB phenomena and for the identification of risks related to toxic algal species is given by the monitoring programs. In the microscopy-based monitoring methods, harmful species are distinguished through their morphological characteristics. This can be time consuming and requires great taxonomic expertise due to the existence of morphologically close-related species. The high throughput, automation possibility and specificity of microarray-based detection assay, makes this technology very promising for qualitative detection of HAB species. In this study, an oligonucleotide microarray targeted to the ITS1-5.8S-ITS2 rDNA region of nine toxic dinoflagellate species/clades was designed and evaluated. Two probes (45-47 nucleotides in length) were designed for each species/clade to reduce the potential for false positives. The specificity and sensitivity of the probes were evaluated with ITS1-5.8S-ITS2 PCR amplicons obtained from 20 dinoflagellates cultured strains. Cross hybridization experiments confirmed the probe specificity; moreover, the assay showed a good sensitivity, allowing the detection of up to 2 ng of labeled PCR product. The applicability of the assay with field samples was demonstrated using net concentrated seawater samples, un-spiked or spiked with known amounts of cultured cells. Despite the general application of microarray technology for harmful algae detection is not new, a peculiar group of target species/clades has been included in this new-format assay. Moreover, novelties regarding mainly the probes and the target rDNA region have allowed sensitivity improvements in comparison to previously published studies.     

细小病毒B19 Oligo探针设计

利用BLAST软件对细小病毒B19的序列进行序列比对,获得特异序列;利用生物学软件Oligo6.40设计特异性高、Tm值接近、长度均一的Oligo探针。结果获得了13条70bp的Oligo探针,用于芯片打印及细小病毒B19的检测。表明利用BLAST系统和生物学软件Oligo6.40设计细小病毒B19诊断芯片的探针是一种简便而有效的方法。     

Reference genes identified in the silkworm Bombyx moil during metamorphism based on oligonucleotide microarray and confirmed by qRT-PCR

Gene expression quantification at mRNA level is very important for postgenomic studies, as gene expression level is the reflection of the special biological function of the target gene. Methods used for gene expression quantification, such as microarray or quantitative real-time polymerase chain reaction （qRT-PCR）, require stable expressed reference genes. Thus, finding suitable control genes is essential for gene quantification. In this study, a genome-wide survey of reference genes during metamorphism was performed on silkworm Bombyx mori. Twelve genes were chosen as putative reference genes based on a whole genome oligonucleotide microarray normalized by external controls. Then, qRT- PCR was employed for further validation and selection of potential reference gene candidates. The results were analyzed, and stable genes were selected using geNorm 3.4 and NormFinder software. Finally, considering factors from every aspect, translation initiation factor 4A, translation initiation factor 3 subunit 4, and translation initiation factor 3 subunit 5 （represented by sw22934, sw14876, and sw13956） were selected as reliable internal controls across the examined developmental stages, while cytoplasmic actin （sw22671）, the commonly used reference gene in a previous study was shown to vary drastically throughout the examined developmental stages. For future research, we recommend the use of the geometric mean of those three stable reference genes as an accurate normalization factor for data normalization of different developmental stages during metamorphism.     

Methylation detection oligonucleotide microarray analysis: a high-resolution method for detection of CpG island methylation

Methylation of CpG islands associated with genes can affect the expression of the proximal gene, and methylation of non-associated CpG islands correlates to genomic instability. This epigenetic modification has been shown to be important in many pathologies, from development and disease to cancer. We report the development of a novel high-resolution microarray that detects the methylation status of over 25 000 CpG islands in the human genome. Experiments were performed to demonstrate low system noise in the methodology and that the array probes have a high signal to noise ratio. Methylation measurements between different cell lines were validated demonstrating the accuracy of measurement. We then identified alterations in CpG islands, both those associated with gene promoters, as well as non-promoter-associated islands in a set of breast and ovarian tumors. We demonstrate that this methodology accurately identifies methylation profiles in cancer and in principle it can differentiate any CpG methylation alterations and can be adapted to analyze other species.     

Development and application of an oligonucleotide microarray for the detection of food-borne bacterial pathogens

The rapid and accurate detection and identification of food-borne pathogenic bacteria is critical for food safety. In this paper, we describe a rapid (<4 h) high-throughput detection and identification system that uses universal polymerase chain reaction (PCR) primers to amplify a variable region of bacterial the 16S rRNA gene, followed by reverse hybridization of the products to species-specific oligonucleotide probes on a chip. This procedure was successful in discriminating 204 strains of bacteria from pure culture belonging to 13 genera of bacteria. When this method was applied directly to 115 strains of bacteria isolated from foods, 112/115 (97.4%) were correctly identified; two strains were indistinguishable due to weak signal, while one failed to produce a PCR product. The array was used to detect and successfully identify two strains of bacteria from food poisoning outbreak samples, giving results through hybridization that were identical to those obtained by traditional methods. The sensitivity of the microarray assay was 10² CFU of bacteria. Thus, the oligonucleotide microarray is a powerful tool for the detection and identification of pathogens from foods. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Improving oligonucleotide fingerprinting of rRNA genes by implementation of polony microarray technology

Improvements to oligonucleotide fingerprinting of rRNA genes (OFRG) were obtained by implementing polony microarray technology. OFRG is an array-based method for analyzing microbial community composition. Polonies are discrete clusters of DNA, produced by solid-phase PCR in hydrogels, and derived from individual, spatially isolated DNA molecules. The advantages of a polony-based OFRG method include higher throughput and reductions in the PCR-induced errors and compositional skew inherent in all other PCR-based community composition methods, including high-throughput sequencing of rRNA genes. Given the similarities between polony microarrays and certain aspects of sequencing methods such as the Illumina platform, we suggest that if concepts presented in this study were implemented in high-throughput sequencing protocols, a reduction of PCR-induced errors and compositional skew may be realized.     

Identification of upper respiratory tract pathogens using electrochemical detection on an oligonucleotide microarray

Bacterial and viral upper respiratory infections (URI) produce highly variable clinical symptoms that cannot be used to identify the etiologic agent. Proper treatment, however, depends on correct identification of the pathogen involved as antibiotics provide little or no benefit with viral infections. Here we describe a rapid and sensitive genotyping assay and microarray for URI identification using standard amplification and hybridization techniques, with electrochemical detection (ECD) on a semiconductor-based oligonucleotide microarray. The assay was developed to detect four bacterial pathogens (Bordetella pertussis, Streptococcus pyogenes, Chlamydia pneumoniae and Mycoplasma pneumoniae) and 9 viral pathogens (adenovirus 4, coronavirus OC43, 229E and HK, influenza A and B, parainfluenza types 1, 2, and 3 and respiratory syncytial virus. This new platform forms the basis for a fully automated diagnostics system that is very flexible and can be customized to suit different or additional pathogens. Multiple probes on a flexible platform allow one to test probes empirically and then select highly reactive probes for further iterative evaluation. Because ECD uses an enzymatic reaction to create electrical signals that can be read directly from the array, there is no need for image analysis or for expensive and delicate optical scanning equipment. We show assay sensitivity and specificity that are excellent for a multiplexed format.     

Development of an oligonucleotide microarray to detect di- and monooxygenase genes for benzene degradation in soil

Diverse environmental genes have been identified recently. To characterize their functions, it is necessary to understand which genes and what combinations of those genes are responsible for the biodegradation of soil contaminants. In this article, a 60-mer oligonucleotide microarray was constructed to simultaneously detect di- and monooxygenase genes for benzene and related compounds. In total, 148 probes were designed and validated by pure-culture hybridizations using the following criteria to discriminate between highly homologous genes: ≤53-bp identities and ≤25-bp continuous stretch to nontarget sequences. Microarray hybridizations were performed using PCR products amplified from five benzene-amended soils and two oil-contaminated soils. Six of the probes gave a positive signal for more than six soils; thus, they may represent key sequences for benzene degradation in the environment. The microarray developed in this study will be a powerful tool for the screening of key genes involved in benzene degradation and for the rapid profiling of benzene oxygenase gene diversity in contaminated soils.     

An improved single-cell cDNA amplification method for efficient high-density oligonucleotide microarray analysis

A systems-level understanding of a small but essential population of cells in development or adulthood (e.g. somatic stem cells) requires accurate quantitative monitoring of genome-wide gene expression, ideally from single cells. We report here a strategy to globally amplify mRNAs from single cells for highly quantitative high-density oligonucleotide microarray analysis that combines a small number of directional PCR cycles with subsequent linear amplification. Using this strategy, both the representation of gene expression profiles and reproducibility between individual experiments are unambiguously improved from the original method, along with high coverage and accuracy. The immediate application of this method to single cells in the undifferentiated inner cell masses of mouse blastocysts at embryonic day (E) 3.5 revealed the presence of two populations of cells, one with primitive endoderm (PE) expression and the other with pluripotent epiblast-like gene expression. The genes expressed differentially between these two populations were well preserved in morphologically differentiated PE and epiblast in the embryos one day later (E4.5), demonstrating that the method successfully detects subtle but essential differences in gene expression at the single-cell level among seemingly homogeneous cell populations. This study provides a strategy to analyze biophysical events in medicine as well as in neural, stem cell and developmental biology, where small numbers of distinctive or diseased cells play critical roles.     

Multipathogen oligonucleotide microarray for environmental and biodefense applications

Food-borne pathogens are a major health problem. The large and diverse number of microbial pathogens and their virulence factors has fueled interest in technologies capable of detecting multiple pathogens and multiple virulence factors simultaneously. Some of these pathogens and their toxins have potential use as bioweapons. DNA microarray technology allows the simultaneous analysis of thousands of sequences of DNA in a relatively short time, making it appropriate for biodefense and for public health uses. This paper describes methods for using DNA microarrays to detect and analyze microbial pathogens. The FDA-1 microarray was developed for the simultaneous detection of several food-borne pathogens and their virulence factors including Listeria spp., Campylobacter spp., Staphylococcus aureus enterotoxin genes and Clostridium perfringens toxin genes. Three elements were incorporated to increase confidence in the microarray detection system: redundancy of genes, redundancy of oligonucleotide probes (oligoprobes) for a specific gene, and quality control oligoprobes to monitor array spotting and target DNA hybridization. These elements enhance the reliability of detection and reduce the chance of erroneous results due to the genetic variability of microbes or technical problems with the microarray. The results presented demonstrate the potential of oligonucleotide microarrays for detection of environmental and biodefense relevant microbial pathogens.