Determination of the structure of the Escherichia coli K100 capsular polysaccharide, cross-reactive with the capsule from type b Haemophilus influenzae

The structure of the Escherichia coli K100 capsular polysaccharide, cross-reactive with that from type b Haemophilus influenzae, was determined by using a combination of chemical and spectroscopic techniques. The structure of the K100 repeating unit was found to be----3)-beta-D-Ribf-(1----2)-D-ribitol-5-(PO4----. The K100 polysaccharide is thus identical in composition to, but different in linkage from, the H. influenzae type b capsular polysaccharide, which has beta-D-Ribf-(1----1)-D-ribitol linkages.     

Expression of the Escherichia coli K5 capsular antigen: immunoelectron microscopic and biochemical studies with recombinant E. coli.

The capsular K5 polysaccharide, a representative of group II capsular antigens of Escherichia coli, has been cloned previously, and three gene regions responsible for polymerization and surface expression have been defined (I. S. Roberts, R. Mountford, R. Hodge, K. B. Jann, and G. J. Boulnois, J. Bacteriol. 170:1305-1310, 1988). In this report, we describe the immunoelectron microscopic analysis of recombinant bacteria expressing the K5 antigen and of mutants defective in either region 1 or region 3 gene functions, as well as the biochemical analysis of the K5 capsular polysaccharide. Whereas the K5 clone expressed the K5 polysaccharide as a well-developed capsule in about 25% of its population, no capsule was observed in whole mount preparations and ultrathin sections of the expression mutants. Immunogold labeling of sections from the region 3 mutant revealed the capsular K5 polysaccharide in the cytoplasm. With the region 1 mutant, the capsular polysaccharide appeared associated with the cell membrane, and, unlike the region 3 mutant polysaccharide, the capsular polysaccharide could be detected in the periplasm after plasmolysis of the bacteria. Polysaccharides were isolated from the homogenized mutants with cetyltrimethylammonium bromide. The polysaccharide from the region 1 mutant had the same size as that isolated from the capsule of the original K5 clone, and both polysaccharides were substituted with phosphatidic acid. The polysaccharide from the region 3 mutant was smaller and was not substituted with phosphatidic acid. These results prompt us to postulate that gene region 3 products are involved in the translocation of the capsular polysaccharide across the cytoplasmic membrane and that region 1 directs the transport of the lipid-substituted capsular polysaccharide through the periplasm and across the outer membrane.     

Structure of the type 5 capsular polysaccharide of Staphylococcus aureus

The Staphylococcus aureus type 5 capsular polysaccharide is composed of 2-acetamido-2-deoxy-L-fucose (1 part), 2-acetamido-2-deoxy-D-fucose (1 part), and 2-acetamido-2-deoxy-D-mannuronic acid (1 part). On the basis of methylation analysis, optical rotation, high-field one- and two-dimensional 1H- and 13C-n.m.r. experiments, and selective cleavage with 70% aqueous hydrogen fluoride, the polysaccharide was found to be a partially O-acetylated (50%) polymer of the repeating trisaccharide unit, [----4)-3-O-Ac-beta-D-ManpNAcA-(1----4)-a-L-FucpNAc-(1----3) -beta-D-FucpNAc-(1----]n.     

Induction of capsular polysaccharide synthesis by rho-fluorophenylalanine in Escherichia coli wild type and strains with altered phenylalanyl soluble ribonucleic acid synthetase

Escherichia coli K-12 strain AB259 can be induced to form capsular polysaccharide (mucoid clones) by dl-p-fluorophenylalanine (FPA; 5 x 10(-6)m on agar plates at 37 C or 8 x 10(-5)m in liquid medium at 30 C). The change was shown to be phenotypic. An increase in enzymes probably involved in capsular polysaccharide synthesis [phosphomannose isomerase (3.3-fold), uridine diphosphate-d-galactose-4-epimerase (2.5-fold), and guanine diphosphate-l-fucose synthetase] was demonstrated as a result of growth in FPA. These increases appear sufficient to account for the increased synthesis of capsular polysaccharide due to growth in FPA. FPA-resistant derivatives of strain AB259 were obtained by selecting mutants on FPA-containing agar or by transducing in an altered phenylalanyl soluble ribonucleic acid synthetase that activates FPA poorly. Mucoid clones were formed by these strains only in the presence of 30 to 1,000 times as much FPA. Among these strains, there was a close correlation between incorporation of FPA-C(14) and induction of capsular polysaccharide synthesis. The results are thus consistent with the following model: FPA is incorporated into the protein product of the R(1) gene (repressor) and alters it sufficiently to allow derepression of several enzymes.     

Chemical characterization of capsular polysaccharide from Cryptococcus neoformans serotype A-D

During a study of serotyping of Cryptococcus neoformans, we found that the type strain of C. neoformans (CBS 132) was serotype A-D. This strain agglutinated with both factor 7 serum (specific for serotype A) and factor 8 serum (specific for serotype D) in our serotyping system. Therefore, we investigated the chemical structure of the antigenic capsular polysaccharide of this strain. The soluble capsular polysaccharide was obtained from the culture supernatant fluid by precipitation with ethanol. Column chromatography of the polysaccharide on DEAE-cellulose yielded three fractions (F-1 to F-3). The major antigenic activity was found in the F-3 fraction. The results obtained by methylation analysis, controlled Smith degradation-methylation analysis, partial acid hydrolysis, and other structural studies of F-3 polysaccharide indicated that the polysaccharide contains mannose, xylose, and glucuronic acid at a ratio of 7:2:2, and has a backbone of alpha (1-3)-linked D-mannopyranoside residues with a single branch of beta (1-2)-xylose and glucuronic acid. The ratio of mannose residues with or without a branch in the F-3 polysaccharide was 4:3 and its molecular weight calculated from the average of the degree of polymerization was 46,500 daltons. These results indicate that the chemical structure of the capsular polysaccharide of serotype A-D is very similar to those from serotypes A and D, suggesting that small differences in the molar ratio and pattern of linkage of monosaccharides in the branch of the polysaccharides of the three serotypes may be responsible for their different specificities.     

Expression of the capsular K5 polysaccharide of Escherichia coli: biochemical and electron microscopic analyses of mutants with defects in region 1 of the K5 gene cluster.

The gene cluster of the capsular K5 polysaccharide, a representative of group II capsular antigens of Escherichia coli, has been cloned previously, and three regions responsible for polymerization and surface expression have been defined (I.S. Roberts, R. Mountford, R. Hodge, K. B. Jann, and G. J. Boulnois, J. Bacteriol. 170:1305-1330, 1988). Region 1 has now been sequenced, and five open reading frames (kpsEDUCS) have been defined (C. Pazzani, C. Rosenow, G. J. Boulnois, D. Bronner, K. Jann, and I. S. Roberts, J. Bacteriol. 175:5978-5983, 1993). In this study, we characterized region 1 mutants by immunoelectron microscopy, membrane-associated polymerization activity, cytoplasmic CMP-2-keto-3-deoxyoctonate (KDO) synthetase activity, and chemical analysis of their K5 polysaccharides. Certain mutations within region 1 not only effected polysaccharide transport (lack of region 1 gene products) but also impaired the polymerization capacity of the respective membranes, reflected in reduced amounts of polysaccharide but not in its chain length. KDO and phosphatidic acid (phosphatidyl-KDO) substitution was found with extracellular and periplasmic polysaccharide and not with cytoplasmic polysaccharide. This and the fact that the K5 polysaccharide is formed in a kpsU mutant (defective in capsule-specific K-CMP-KDO synthetase) showed that CMP-KDO is engaged not in initiation of polymerization but in translocation of the polysaccharide.     

Synthesis of the K5 (group II) capsular polysaccharide in transport-deficient recombinant Escherichia coli

Abstract The genes directing the expression of group II capsules in Escherichia coli are organized into three regions. The central region 2 is type specific and thought to determine the synthesis of the respective polysaccharide, whilst the flanking regions 1 and 3 are common to all group II gene clusters and direct the surface expression of the capsular polysaccharide. In this communication we analyze the involvement of region 1 and 3 genes in the synthesis of the capsular KS polysaccharide. Recombinant E. coli strains harboring all KS specific region 2 genes and having various combinations of region 1 and 3 gene were studied using immunoelectron microscopy. Membranes from these bacteria were incubated with UDP[¹⁴C]GlcA and UDPG1cNAc in the absence or presence of KS polysaccharide as an exogenous acceptor. It was found that recombinant strains with only gene region 2 did not produce the K5 polysaccharide. Membranes of such strains did not synthesize the polymer and did not elongate K5 polysaccharide added as an exogenous acceptor. An involvement of genes from region 1 (notably kps C and kps S) and from region 3 (notably kps T) in the K5 polysaccharide synthesis was apparent and is discussed.     

High production of polysialic acid [Neu5Ac alpha(2-8)-Neu5Ac alpha(2-9)]n by Escherichia coli K92 grown in a chemically defined medium. Regulation of temperature

The capsular polysaccharide of Escherichia coli K92 consists of a linear polymer of Neu5Ac with alternating alpha(2-8) and alpha(2-9) linkages. It accumulates when the bacterium is grown at 37 degrees C in a defined medium containing D-xylose and L-asparagine as carbon and nitrogen sources. Release of the capsular polymer into the medium was maximal (450 micrograms x ml-1) in the stationary phase of growth (76 h). This medium could be useful for obtaining sufficient polymer to develop effective vaccines. The enzyme, CMP-Neu5Ac synthetase, was not detected in cells grown at 20 degrees C. The lack of this enzyme explains the absence of polymer biosynthesis when the bacterium was grown at 20 degrees C.     

The structure of the specific capsular polysaccharide of Rhodococcus equi serotype 4

The specific capsular polysaccharide produced by Rhodococcus equi serotype 4 was found to be a high-molecular-weight acidic polymer composed of D-glucose, D-mannose, pyruvic acid and a previously unidentified 5-amino-3,5-dideoxynonulosonic (rhodaminic) acid in the proportions 2:1:1:1. Structural analysis, employing a combination of microanalytical methods, nuclear magnetic resonance spectroscopy, and mass spectrometric techniques, established that the polysaccharide consisted of linear repeating tetrasaccharide units having the sequence of residues shown below. In the native polysaccharide, the rhodaminic acid residues were present as their acetamido derivatives (RhoANAc) and carried 1-carboxyethylidene groups that bridged the O-7 and O-9 positions. Treatment of the capsular polysaccharide with dilute acetic acid and/or anhydrous hydrogen fluoride under hydrolytic/solvolytic conditions, resulted in the formation of four different oligosaccharide species. The 1H and 13C NMR resonances of these oligosaccharide fragments and of the native serotype 4 capsular polysaccharides were fully assigned by homo- and heteronuclear chemical shift correlation methods.     

Purification, characterization and immunological properties of the capsular polysaccharide of Pasteurella haemolytica serotype T15: its identity with the K62 (K2ab) capsular polysaccharide of Escherichia coli and the capsular polysaccharide of Neisseria meningitidis serogroup H

Capsular polysaccharide from two strains of Pasteurella haemolytica serotype T15 was purified and characterized by chemical analysis and NMR spectroscopy. The polymer, a teichoic acid, proved to be very similar in structure to the capsular polysaccharide of P. haemolytica serotype T4 and identical to the previously described K62 (K2ab) capsular polysaccharide of Escherichia coli, and the capsular polysaccharide of Neisseria meningitidis serotype H, i.e. ----(2-glycerol-3)----(phosphate)----(4-alpha-D-galactopyranose -1)---- with partial O-acetylation on the galactose residues. Electron microscopy with Protein A-gold labelled antisera showed that the polysaccharide was peripherally located on the surface of all three organisms. Chemical removal of O-acetyl groups from the polysaccharide yielded a structure identical to that previously described for E. coli K2 (K2a). Both O-acetylated and de-O-acetylated P. haemolytica T15 polymers, when absorbed on to sheep erythrocytes in passive haemagglutination assays, yielded identical antibody titres with sera raised against P. haemolytica T15, E. coli K2 or N. meningitidis H whole cells. De-O-acetylation of the Pasteurella polysaccharide influenced its precipitability with immune sera, but this could not be related to the absence of O-acetyl groups because the non-acetylated E. coli K2 polymer readily precipitated with a line of 'identity' with the acetylated P. haemolytica T15 polymer.     

Structure and serological characteristics of the capsular K4 antigen of Escherichia coli O5:K4:H4, a fructose-containing polysaccharide with a chondroitin backbone

The chemical structure of the K4-specific capsular polysaccharide (K4 antigen) of Escherichia coli O5:K4:H4 was elucidated by composition, carboxyl reduction periodate oxidation methylation nuclear-magnetic-resonance spectroscopy and enzymatic cleavage. The polysaccharide consists of a backbone with the structure----3)-beta-D-glucuronyl-(1,4)-beta-D-N-acetylgalactosaminyl(1- to which beta-fructofuranose is linked at C-3 of glucuronic acid. Mild acid hydrolysis liberated fructose and converted the K4 antigen into a polysaccharide which has the same structure as chondroitin. The defructosylated polysaccharide was a substrate for hyaluronidase and chondroitinase. The serological reactivity of the K4 polysaccharide was markedly reduced after defructosylation.     

Characterization of three capsular polysacharides produced by Burkholderia pseudomallei

Three kinds of capsular polysaccharide (CP) were found to be produced by Burkholderia pseudomallei. When the bacterium was grown with the medium without glycerol, CP-1a and CP-1b were produced. CP-1a was mainly 1.4-linked glucan and CP-1b was identified as a polymer composed of galactose and 3-deoxy-D-manno-octulosonic acid, whose chemical structure was recently reported by other laboratories. When the bacterium was grown with the medium containing 5" glycerol. CP-2 was synthesized. CP-2 contained galactose, rhamnose, mannose, glucose and a uronic acid in a ratio of approximately 3:1:0.3:1:1. Methylation analysis of the purified polysaccharides demonstrated that the two acidic polysaccharides. CP-1b and CP-2 shared no common structure, indicating that CP-2 was an acidic capsular polysaccharide whose chemical characters were not reported previously.     

Structural studies of the capsular polysaccharide from Haemophilus pleuropneumoniae serotype 1

The capsular polysaccharide of Haemophilus pleuropneumoniae serotype 1 (ATCC 27088) was found to be a teichoic acid type polysaccharide of a repeating disaccharide unit composed of 2-acetamido-2-deoxy-D-glucose and D-galactose units. By composition analysis, methylation, partial hydrolysis, dephosphorylation, and one- and two-dimensional 500-MHz proton nuclear magnetic resonance experiments, together with 13C nuclear magnetic resonance studies, it was concluded that the capsular polysaccharide is a high molecular weight linear polymer having the structure: (Formula: see text)     

Localization and partial characterization of soybean lectin-binding polysaccharide of Rhizobium japonicum.

Immunoelectron microscopy was combined with partial characterization of isolated exopolysaccharide to study binding of soybean lectin by Rhizobium japonicum strain USDA 138. Lectin-binding activity resided in two forms of exopolysaccharide produced during growth: an apparently very high-molecular-weight capsular form and a lower-molecular-weight diffusible form. At low-speed centrifugation, the capsular form cosedimented with cells to form a viscous, white, cell-gel complex which was not diffusible in 1% agar, and the diffusible form remained in the cell-free supernatant. Electron microscopic observation of the cell-gel complex after labeling with soybean lectin-ferritin conjugate revealed that capsular polysaccharides, frequently attached to one end of the cells, were receptors for lectin. The outer membrane of the cell bound no lectin. Various preparations of exopolysaccharide isolated from the culture supernatant were tested for lectin binding, interaction with homologous somatic antigen, and the presence of 2-keto-3-deoxyoctonate and were chromatographed in Sepharose 4B and 6B gel beds. Lectin binding was restricted to a polysaccharide component designated as lectin-binding polysaccharide. This polysaccharide, as present in the cell-free culture supernatant, was a diffusible acidic polysaccharide devoid of 2-keto-3-deoxyoctonate, with a molecular weight of 2 X 10(6) to 5 X 10(6). It was concluded that the soybean lectin-binding component of R. japonicum is an extracellular polysaccharide and not a lipopolysaccharide and that the diffusible lectin-binding polysaccharide probably differs from the very high-molecular-weight lectin-binding polysaccharide of the loose capsule (slime) only in the degree of polymerization.     

Occurrence of a capsule in Aeromonas salmonicida

Aeromonas salmonicida grown in a medium with excess glucose as carbon source produces both capsular and exocellular polysaccharides. The capsular polysaccharide is composed of glucose, mannose, rhamnose, N-acetylmannosamine and mannuronic acid in the molar ratios of approximately 5:3:0.75:2:1. The extracellular polysaccharide is similarly constituted, but in the molar ratios of approximately 4.75:10.5:1.5:2:1. The capsular and exocellular polysaccharides did not cross-react with monoclonal antibodies against the A-layer or the O-antigen lipopolysaccharide.     

肺炎链球菌5型发酵工艺的优化

目的:采用正交试验设计方法进行肺炎链球菌5型发酵工艺的研究。方法:根据正交试验设计表L9(34)设计的试验条件组合进行了9次肺炎链球菌5型的发酵,采用70升发酵罐进行发酵工艺的摸索,提取了肺炎链球菌5型荚膜多糖粗糖。结果:最佳的发酵培养条件组合为温度37℃、葡萄糖20克/升、大豆胨15克/升、pH值7.3,最佳的纯化条件组合为冷酚抽提三次、沉核酸乙醇浓度23%、超滤膜孔径50kD、最终沉糖乙醇浓度60%,在此筛选得到的最佳条件下,连续进行了5个批次肺炎链球菌5型的发酵与荚膜多糖提取,荚膜多糖粗糖的平均收率为808.6mg/L,相对标准偏差为3.84%。结论:上述发酵培养条件组合适合用于肺炎多糖疫苗的研究和生产。     

Mutations in the waaR gene of Escherichia coli which disrupt lipopolysaccharide outer core biosynthesis affect cell surface retention of group 2 capsular polysaccharides

On the basis of increased resistance to K5 capsule-specific bacteriophage, a waaR transposon mutant defective in the biosynthesis of lipopolysaccharide outer core was isolated. In a K1-expressing strain the mutation equally affected sensitivity to K1 capsule-specific bacteriophage, indicating a general effect on group 2 capsules. The waaR mutation affected retention on the cell surface of the K5 polysaccharide, with increased polysaccharide accumulating in the culture supernatant. This indicates that interactions between the outer core of lipopolysaccharide and group 2 capsular polysaccharides are important for the stabilization of group 2 capsular polysaccharides on the cell surface.     

Structural analysis of the capsular polysaccharide from Sinorhizobium fredii HWG35

We have determined the structure of a capsular polysaccharide from Sinorhizobium fredii HWG35. This polysaccharide was isolated following the standard protocols applied for lipopolysaccharide isolation. On the basis of monosaccharide analysis, methylation analysis, mass spectrometric analysis, one-dimensional (1)H and (13)C NMR, and two-dimensional NMR experiments, the structure was shown to consist of a polymer having the following disaccharide repeating unit: -->6)-2,4-di-O-methyl-alpha-d-Galp-(1-->4)-beta-d-GlcpA-(1-->. Strain HWG35 produces a capsular polysaccharide that does not show the structural motif (sugar-Kdx) observed in those S. fredii strains that, while effective with Asiatic soybean cultivars, are unable to form nitrogen-fixing nodules with American soybean cultivars. Instead, the structure of the capsular polysaccharide of S. fredii HWG35 is in line with those produced by strains HH303 (rhamnose and galacturonic acid) and B33 (4-O-methylglucose-3-O-methylglucuronic acid), two S. fredii strains that form nitrogen-fixing nodules with both groups of soybean cultivars. Hence, in these three strains that effectively nodulate American soybean cultivars, the repeating unit of the capsular polysaccharide is composed of two hexoses, one neutral (methylgalactose, rhamnose, or methylglucose) and the other acidic (glucuronic, galacturonic, or methylglucuronic acid).     

Structure of the capsular polysaccharide of Actinobacillus pleuropneumoniae serotype 5b.

The capsular polysaccharide of Actinobacillus pleuropneumoniae serotype 5b (strain L20) was found to be a high molecular mass polymer composed of 2-acetamido-2-deoxy-D-glucose, D-glucose, and 3-deoxy-D-manno-octulosonic acid (KDO). Methylation analysis, partial hydrolysis and a combination of homonuclear and 1H-detected heteronuclear shift-correlated nuclear magnetic resonance experiments showed the polysaccharide to be a branched polymer of a trisaccharide repeating unit, having the structure: [formula; see text]     

Structure of the capsular polysaccharide of Klebsiella serotype K79

The structure of the capsular polysaccharide from Klebsiella K79 was determined by the techniques of methylation, periodate oxidation, beta-elimination, chromic acid oxidation, and partial hydrolysis. N.m.r. spectroscopy (1H and 13C) was used extensively to establish the nature of the anomeric linkages of the polysaccharide and of oligosaccharides derived through degradative procedures. The polysaccharide was found to have the heptasaccharide, "5 + 2" repeating unit: (Formula: see text).