Asymmetric structure of a three-arm DNA junction

We present here experimental evidence that three-arm branched DNA molecules form an asymmetric structure in the presence of Mg2+. Electrophoretic mobility and chemical and enzymatic footprinting experiments on a three-arm branched DNA molecule formed from three 16-mer strands are described. The electrophoretic mobilities of three species of a three-arm junction in which pairs of arms are extended are found to differ in the presence of Mg2+: one combination of elongated arms migrates significantly faster than the other two. This effect is eliminated in the absence of Mg2+, leading us to suggest that the three-arm DNA junction forms an asymmetric structure due to preferential stacking of two of the arms at the junction in the presence of Mg2+. The pattern of self-protection of each 16-mer strand of the core complex exposed to Fe(II).EDTA and DNase I scission is unique, consistent with formation of an asymmetric structure in the presence of Mg2+. We conclude that three-arm junctions resemble four-arm junctions in showing preferential stacking effects at the branch site. Comparison of the scission patterns of linear duplexes and the branched trimer by the reactive probes methidiumpropyl-EDTA.Fe(II) [MPE.Fe(II)] and Cu(I)-[o-phenanthroline]2 [(OP)2CuI] further indicates that the branch point represents a site of enhanced binding for drugs, as it does in the four-arm case. Reaction with diethyl pyrocarbonate (DEPC), a purine-specific probe sensitive to conformation, is enhanced at the branch site, consistent with loosening of base pairing or unpairing at this point.(ABSTRACT TRUNCATED AT 250 WORDS)     

Characterization of a bimobile DNA junction

We present here a chemical and enzymatic footprinting analysis of a branched DNA molecule formed from four complementary 50-mer strands. These strands are designed to form a stable junction, in which two steps of branch point migration freedom are possible. Exposure of the junction to Fe(II).EDTA shows protection of 3 or 4 residues in each strand at the branch, while two resolvase enzymes (endonuclease VII from phage T4 and endonuclease I from phage T7), cleave all four strand near the branch. Chemical footprinting of this junction using the reagents MPE.Fe(II) and (OP)2Cu(I) shows that the branch site is hyper-reactive to cutting induced by these probes as it is in an immobile four-arm junction. The effects involve more residues than in the immobile case. In the absence of divalent cations, the structure of the junction alters, sites of enhanced cleavage by MPE.Fe(II) and (OP)2Cu(I) disappear, and purines at the branch become reactive to diethyl pyrocarbonate. Our interpretation of these results is based on the properties of immobile junction analogs and their response to these probes. In the presence of Mg2+, the three migrational isomers coexist, each probably in the form of a 2-fold symmetric structure with two helical arms stacked.     

Construction and analysis of monomobile DNA junctions

Immobile DNA junctions are complexes of oligomeric DNA strands that interact to yield branched structures in which the branch point cannot migrate. This is achieved by minimizing the sequence symmetry in the flanking arms, so that base pairs lock at the branch site. Here, we report the design, synthesis, and analysis of two semimobile junctions, structures in which a controlled extent of branch point migratory freedom is deliberately introduced. We have constructed two minimally symmetric four-arm semimobile junctions from synthetic deoxy 17-mers. These junctions, termed "monomobile", contain a single pair of base pairs (A-T or C-G) which can migrate at the site of branching, while the rest of the junction is immobile. We have demonstrated by gel electrophoresis techniques that these junctions form and that they have the predicted 1:1:1:1 stoichiometry. We have compared these junctions with the immobile junction on which they are based, by means of hydroxyl radical protection experiments. From these data, both migratory conformers can be seen to coexist in solution. The semimobile junction with the C-G base pair has the same crossover and stacking pattern observed for the immobile junction, while the junction with the A-T base pair has the opposite pattern. We conclude that crossover and stacking patterns are a direct consequence of the base pairs which flank the junction. In addition, the data indicate that the crossover pattern biases for these junctions are much greater than are the migratory biases.     

Resolution of Holliday junction analogs by T4 endonuclease VII can be directed by substrate structure

Endonuclease VII is an enzyme from bacteriophage T4 capable of resolving four-arm Holliday junction intermediates in recombination. Since natural Holliday junctions have homologous (2-fold) sequence symmetry, they can branch migrate, creating a population of substrates that have the branch point at different sites. We have explored the substrate requirements of endonuclease VII by using immobile analogs of Holliday junctions that lack this homology, thereby situating the branch point at a fixed site in the molecule. We have found that immobile junctions whose double-helical arms contain fewer than nine nucleotide pairs do not serve as substrates for resolution by endonuclease VII. Scission of substrates with 2-fold symmetrically elongated arms produces resolution products that are a function of the particular arms that are lengthened. We have confirmed that the scission products are those of resolution, rather than nicking of individual strands, by using shamrock junction molecules formed from a single oligonucleotide strand. A combination of end-labeled and internally labeled shamrock molecules has been used to demonstrate that all of the scission is due to coordinated cleavage of DNA on opposite sides of the junction, 3' to the branch point. Endonuclease VII is known to cleave the crossover strands of Holliday junctions in this fashion. The relationship of the long arms to the cleavage direction suggests that the portion of the enzyme which requires the minimum arm length interacts with the pair of arms containing the 3' portion of the crossover strands on the bound surface of the antiparallel junction.     

The isomeric preference of Holliday junctions influences resolution bias by lambda integrase.

Lambda site-specific recombination proceeds by a pair of sequential strand exchanges that first generate and then resolve a Holliday junction intermediate. A family of synthetic Holliday junctions with the branch point constrained to the center of the 7 bp overlap region was used to show that resolution of the top strands and resolution of the bottom strands are symmetrical but stereochemically distinct processes. Lambda integrase is sensitive to isomeric structure, preferentially resolving the pair of strands that are crossed in the protein-free Holliday junction. At the branch point of stacked immobile Holliday junctions, the number of purines is preferentially maximized in the crossed (versus continuous) strands if there is an inequality of purines between strands of opposite polarity. This stacking preference was used to anticipate the resolution bias of freely mobile junctions and thereby to reinforce the conclusions with monomobile junctions. The results provide a strong indication that in the complete recombination reaction a restacking of helices occurs between the top and bottom strand exchanges.     

Effect of sequence on the structure of three-arm DNA junctions

We have investigated the geometry of a number of three-arm branched DNA molecules by measuring the relative electrophoretic mobilities of analogues of each junction in which one pair of arms is extended. In general, the mobilities of three species of three-arm junctions in which the duplex arms are extended pairwise differ in the presence of Mg2+. This effect is eliminated by the absence of Mg2+ or by an increase in temperature, leading us to conclude that the three-arm DNA junctions are not 3-fold symmetric, because of either preferential stacking or asymmetric kinking of the arms at the branch that occurs in the presence of Mg2+. The geometry of the junction is governed by the base sequence at the branch and 1 bp removed from the branch. The pairwise elongated analogues of junctions that contain identical base pairs at the branch or 1 bp from the branch show mobility differences; when both positions have the same sequence no mobility differences are detected even in the presence of Mg2+. Formation of a branch in three-arm DNA junctions can be seen to produce a strain or deformation that propagates about one turn of the helix from the branch, leading thymines in this region to become hyperreactive to osmium tetraoxide. Surprisingly, the effect is independent of the presence or absence of metal cations. The structure of the three-arm junction is thus quite different in character from that of four-arm junctions both in the presence and absence of high concentrations of metal cations.     

A four-way junction with triple-helical arms: design, characterization, and stability

The formation of the four-way junction containing four triple-helical arms has been demonstrated using chemical methods (polyacrylamide gel electrophoresis and chemical footprinting using OsO(4) as a probe) and physical methods (UV absorbance melting and DSC). The junction J(T1T3) was assembled from two 20-mer purine strands and two 44-mer pyrimidine strands. To determine the contribution of the different arms to the stability of the complete structure of J(T1T3), the junction was compared to two simplified substructures, J(T1) and J(T3), respectively. Common to these complexes is the underlying double-helical four-way junction Js. Addition of Na(+) had a profound effect on stabilizing and subsequently folding the junctions into the stacked X-structures. The following results support the structure present: (i) The native polyacrylamide electrophoresis exhibits only a single band(s) corresponding to one species present when all four single strands are mixed in equal amounts. (ii) OsO(4) modifications were investigated at pH 5.0 and in the presence of 10 mM Mg(2+) and 100 mM Na(+). There is no cleavage of thymine residues at the branch point and throughout the structure. (iii) The thermal unfolding of J(T1) and J(T3) illustrates that the triple-helical arms are more stable than the double-helical arms which are contained in these junctions and that J(T1T3) with four triple-helical arms is slightly more stable than J(T1) and J(T3). (iv) The calorimetric transition enthalpies determined for the arms of J(T1T3) are comparable to those associated with the unfolding of its corresponding arms in J(T1) and J(T3). The results also illustrate that the formation of the junctions is not restricted by the pH, [Na(+)], sequence composition of the arms, and/or the loop position.     

DNase I cleavage of branched DNA molecules

We report here a potentially useful signature of branched DNA structures. The base 5' to the branch and the five bases flanking the 3' side of the branch site are protected from cleavage by DNase I in both three- and four-arm branched DNA molecules. Our procedure is to measure the cleavage profile for each 5' -labeled strand in a control duplex and compare this with that of the same strand in a branched structure under conditions yielding less than one cut per strand. The resulting cleavage pattern in an immobile four-arm junction is roughly 2-fold symmetric, consistent with the pattern of Fe(II).EDTA-induced cleavage that has been observed previously. In the three-arm junction, the DNase I cleavage pattern is asymmetric, indicating lack of 3-fold symmetry. A variable pattern of protection occurs to the 5' side of the branch in some strands only for both three- and four-arm junctions, extending 2-4 residues 5' to the branch.     

Charge dependence of Fe(II)-catalyzed DNA cleavage.

The effect of charge of the Fe(II) reagent used to induce DNA strand cleavage reactions in the presence of a source of reducing equivalents is investigated using two oligonucleotide models. The first consists of the two strands dA20 and dT20, and an equimolar complex between them. The second is a short four-arm branched DNA complex composed of four 16-mer strands. In the former case, cleavage of the 1:1 complex by three reagents with different formal charge, Fe(II).EDTA2-, Fe(II).EDDA and Fe2+, is comparable in rate to that of the individual dT20 and the dA20 strands. While the three reagents show similar cleavage rates for the duplex and single stranded molecules, they give distinctive cutting patterns in the DNA tetramer, consistent with the presence of a site of excess negative charge at the branch point. Scission induced by Fe(II).EDTA2- shows lower reactivity at the branch site relative to duplex controls, whereas Fe(II)2+ shows enhanced reactivity. Formally neutral Fe(II).EDDA shows weak loss of cutting reactivity at the branch. The position of attack by Fe(II)2+ in the branched tetramer is shifted with respect to those of Fe(II).EDTA2- or Fe(II).EDDA; a slower migrating species is also detected in the scission of dA20.dT20 duplex by Fe(II) reaction. These results suggest that the Fe(II)2+ reaction proceeds by a different mechanism from the other agents. The difference in cutting profiles induced by the neutral and negatively charged chelated complexes is consistent with a local electrostatic repulsion of a negatively charged source of radicals, not a positively charged one.     

Iron(II)-ethylenediaminetetraacetic acid catalyzed cleavage of RNA and DNA oligonucleotides: similar reactivity toward single- and double-stranded forms

Fe(II)-EDTA catalyzes the cleavage of nucleic acids with little or no base-sequence specificity. We have now studied the preference of this reagent in catalyzing the cleavage of single- versus double-stranded nucleic acid structures. Three RNA and two DNA molecules, each expected to contain both single- and double-stranded regions, were synthesized and their structures characterized by enzymatic digestion using secondary structure specific nucleases. Fe(II)-EDTA catalyzed nearly uniform strand scission along the entire length of each molecule; no correlation with secondary structure was observed. The homopolymer sequence dA30:dT30, embedded in a mixed-sequence context to promote exact register of the homopolymer tract, was cleaved to an extent similar to that of flanking sequences. The reactions were relatively insensitive to K+, Na+, and Mg2+ in the range 10-100 mM and were quenched by Tris-HCl buffer. We conclude that the Fe(II)-EDTA-catalyzed strand scission reaction does not discriminate between typical single- and double-stranded regions, which simplifies the interpretation of experiments in which the reaction is used to probe the tertiary structure of RNA molecules [Latham, J. A., & Cech, T. R. (1989) Science 245, 276-282].     

Quantitation of metal ion and DNA junction binding to the Holliday junction endonuclease Cce1

Cce1 is a magnesium-dependent Holliday junction endonuclease involved in the resolution of recombining mitochondrial DNA in Saccharomyces cerevisiae. Cce1 binds four-way DNA junctions as a dimer, opening the junction into an extended, 4-fold symmetric structure, and resolves junctions by the introduction of paired nicks in opposing strands at the point of strand exchange. In the present study, we have examined the interactions of wild-type Cce1 with a noncleavable four-way DNA junction and metal ions (Mg(2+) and Mn(2+)) using isothermal titration calorimetry, EPR, and gel electrophoresis techniques. Mg(2+) or Mn(2+) ions bind to Cce1 in the absence of DNA junctions with a stoichiometry of two metal ions per Cce1 monomer. Cce1 binds to four-way junctions with a stoichiometry of two Cce1 dimers per junction molecule in the presence of EDTA, and one dimer of Cce1 per junction in 15 mM magnesium. The presence of 15 mM Mg(2+) dramatically reduces the affinity of Cce1 for four-way DNA junctions, by about 900-fold. This allows an estimation of DeltaG degrees for stacking of four-way DNA junction 7 of -4.1 kcal/mol, consistent with the estimate of -3.3 to -4.5 kcal/mol calculated from branch migration and NMR experiments [Overmars and Altona (1997) J. Mol. Biol. 273, 519-524; Panyutin et al. (1995) EMBO J. 14, 1819-1826]. The striking effect of magnesium ions on the affinity of Cce1 binding to the four-way junction is predicted to be a general one for proteins that unfold the stacked X-structure of the Holliday junction on binding.     

Drug binding by branched DNA molecules: analysis by chemical footprinting of intercalation into an immobile junction

Branched DNA structures interact with drugs differently from unbranched control duplexes of similar sequence. A specific interaction between the reagent (methidiumpropyl-EDTA).Fe(II) [MPE.Fe(II)] and a branched DNA molecule formed from 16-mer oligonucleotide strands has been reported [Guo, Q., Seeman, N. C., & Kallenbach, N. R. (1989) Biochemistry 28, 2355-2359]. The structure of the branched molecule is thought to be made up of two double-helical stacking domains with an overall twofold symmetry across the branch site. The MPE-Fe(II) interaction occurs predominantly at or adjacent to the branch site and is eliminated by a second intercalator, propidium iodide. Further studies on the nature and properties of this site are presented here. Comparison of the patterns of scission of linear duplex and branched tetramer by EDTA.Fe(II), MPE.Fe(II), and Cu(I)-(o-phenanthroline)2 [(OP)2Cu(I)] provides a higher resolution picture of the site of enhanced binding. In particular, the sensitive footprinting afforded by (OP)2Cu(I) allows us to localize the major site of preferential interaction with propidium precisely to the branch point itself, with a roughly twofold symmetric pattern of cuts resulting. In detail, the differential pattern with respect to each duplex control is distinct for each arm of the junction. Excess propidium results in apparent reversal of the crossover isomer of the junction, indicating a possible additional avenue for the action of drugs in biological systems--effects on the products of recombination.     

Assembly and characterization of five-arm and six-arm DNA branched junctions.

DNA branched junctions have been constructed that contain either five arms or six arms surrounding a branch point. These junctions are not as stable as junctions containing three or four arms; unlike the smaller junctions, they cannot be shown to migrate as a single band on native gels when each of their arms contains eight nucleotide pairs. However, they can be stabilized if their arms contain 16 nucleotide pairs. Ferguson analysis of these junctions in combination with three-arm and four-arm junctions indicates a linear increase in friction constant as the number of arms increases, with the four-arm junction migrating anomalously. The five-arm junction does not appear to have any unusual stacking structure, and all strands show similar responses to hydroxyl radical autofootprinting analysis. By contrast, one strand of the six-arm junction shows virtually no protection from hydroxyl radicals, suggesting that it is the helical strand of a preferred stacking domain. Both junctions are susceptible to digestion by T4 endonuclease VII, which resolves Holliday junctions. However, the putative helical strand of the six-arm junction shows markedly reduced cleavage, supporting the notion that its structure is largely found in a helical conformation. Branched DNA molecules can be assembled into structures whose helix axes form multiply connected objects and networks. The ability to construct five-arm and six-arm junctions vastly increases the number of structures and networks that can be built from branched DNA components. Icosahedral deltahedra and 11 networks with 432 symmetry, constructed from Platonic and Archimedean solids, are among the structures whose construction is feasible, now that these junctions can be made.     

Drug binding to a DNA BZ molecule: analysis by chemical footprinting.

The polymorphism in a DNA 16-mer (designated BZ-II) has been investigated by means of circular dichroism (CD) spectroscopy and chemical footprinting. CD spectra indicate that, in low salt, the oligomer is fully right-handed whereas, in high salt, it possesses a B-Z conformational junction: half of the duplex is right-handed while the other half is left-handed. Treatment of BZ-II with diethyl pyrocarbonate (DEPC) confirms the existence of a left-handed segment of the duplex in high salt: enhanced DEPC scission occurs at the G residues in the alternating CG sequence. The scission patterns of the upper and lower strands in BZ-II by the reactive chemical probe MPE.Fe(II), and the antitumor antibiotics dynemicin and Fe-(II).bleomycin, are different under low salt conditions. The 3'-terminal region of both upper and lower strands and the middle region of the upper strand of BZ-II are preferential cleavage sites in low salt. This result suggests that the methylated cytosines or the alternating CG domain in the molecule perturbs the DNA structure. Under high salt conditions, the reactivity of the Z-DNA segment of BZ-II for MPE.Fe(II) and Fe(II).bleomycin is dramatically enhanced, while it is reduced in the case of dynemicin. Excess propidium (PI) eliminates preferential cleavage by each of these chemical probes in high salt conditions. This is due in part to conversion of the BZ-DNA molecule into B-DNA, as is seen by a DEPC modification experiment.(ABSTRACT TRUNCATED AT 250 WORDS)     

Parallel symmetric immobile DNA junctions as substrates for E. coli RuvC Holliday junction resolvase

RuvC is a well-characterized Holliday junction resolvase from E. coli. The presence of symmetry in its preferred recognition sequence leads to ambiguity in the position of the crossover point in the junction, because a symmetric junction can undergo branch migration. Symmetric immobile junctions are junctions that contain such symmetric sites, but are prevented from migrating by their physical characteristics. RuvC activity had been analyzed previously by traditional symmetric immobile junctions, in which the helix axes are held antiparallel in a double-crossover motif. Bowtie junctions are branched four-arm molecules containing 5',5' and 3',3' linkages at their crossover points. A new type of symmetric immobile junction can be made by flanking the crossover point of a Bowtie junction with a symmetric sequence. The junction is immobile because mobility would lead to pairing between parallel, rather than antiparallel, nucleotide pairs. In contrast to conventional Holliday junctions and their analogues, the Bowtie junction assumes a parallel, rather than antiparallel, helical domain conformation, offering a new type of substrate for Holliday junction resolvases. Here, we report the digestion of Bowtie junctions by RuvC. We demonstrate that Bowtie junctions can function as symmetric immobile junctions in this system. We also show that RuvC cleaves antiparallel junctions much more efficiently than parallel junctions, where the protein can bind (and cleave) only one site at a time. These data suggest that the presence of two binding sites leads to communication between the two subunits of the enzyme to increase its activity.     

Charge transport through DNA four-way junctions

Long range oxidative damage as a result of charge transport is shown to occur through single crossover junctions assembled from four semi-complementary strands of DNA. When a rhodium complex is tethered to one of the arms of the four-way junction assembly, thereby restricting its intercalation into the π-stack, photo-induced oxidative damage occurs to varying degrees at all guanine doublets in the assembly, though direct strand scission only occurs at the predicted site of intercalation. In studies where the Mg²⁺ concentration was varied, so as to perturb base stacking at the junction, charge transport was found to be enhanced but not to be strongly localized to the arms that preferentially stack on each other. These data suggest that the conformations of four-way junctions can be relatively mobile. Certainly, in four-way junctions charge transport is less discriminate than in the more rigidly stacked DNA double crossover assemblies.     

Resolution of undistorted symmetric immobile DNA junctions by vaccinia topoisomerase I

Holliday junctions are intermediates in genetic recombination. They consist of four strands of DNA that flank a branch point. In natural systems, their sequences have 2-fold (homologous) sequence symmetry. This symmetry enables the molecules to undergo an isomerization, known as branch migration, that relocates the site of the branch point. Branch migration leads to polydispersity, which makes it difficult to characterize the physical properties of the junction and the effects of the sequence context flanking the branch point. Previous studies have reported two symmetric junctions that do not branch migrate: one that is immobilized by coupling to an asymmetric junction in a double crossover context, and a second that is based on molecules containing 5',5' and 3',3' linkages. Both are flawed by distorting the structure of the symmetric junction from its natural conformation. Here, we report an undistorted symmetric immobile junction based on the use of DNA parallelogram structures. We have used a series of these junctions to characterize the junction resolution reaction catalyzed by vaccinia virus DNA topoisomerase. The resolution reaction entails cleavage and rejoining at CCCTT/N recognition sites arrayed on opposing sides of the four-arm junction. We find that resolution is optimal when the scissile phosphodiester (Tp/N) is located two nucleotides 5' to the branch point on the helical strand. Covalent topoisomerase-DNA adducts are precursors to recombinant strands in all reactions, as expected. Kinetic analysis suggests a rate limiting step after the first-strand cleavage.     

Parallel and antiparallel Holliday junctions differ in structure and stability

Two Holliday junction analogs, JA and JP, containing identical base-paired arms have been constructed from oligonucleotides. The former is constrained to adopt an antiparallel Sigal-Alberts structure, and the latter a parallel structure, by means of single strand d(T)9 tethers. We evaluate here the free energy difference between JA and JP using two different methods. One is a direct measurement of the ratio of the equilibrium constants for formation of branched structures from intact duplexes using one labeled strand and a competition assay. The second method estimates the difference in stability from the difference in thermal denaturation temperatures of JA and JP, using urea to shift the tm of the complexes. Both methods reveal a small free energy difference between the two complexes: JA is more stable than JP by -1.1(+/- 0.4) kcal (mol junction)-1, at 25 degrees C, 5 mM-Mg2+, from the first method, and by -1.6(+/- 0.3) kcal (mol junction)-1, according to the second. DNase I and the resolvase, endonuclease I from phage T7, cleave JA differently from JP in the vicinity of the branch, indicating that the structures of these two models differ at this site. Diethyl pyrocarbonate also reveals a difference in the major grooves. Comparison of the scission patterns of JA and JP by the reactive chemical probes methidium-propyl-EDTA..Fe(II), [MPE.Fe(II)] and Cu(I)-[o-phenanthroline]2,[(OP)2Cu(I)], indicates that in both cases the branch point is a site of enhanced binding for drugs, as it is in the untethered four-arm junction containing the same core sequence at the branch.     

Cleavage of symmetric immobile DNA junctions by Escherichia coli RuvC

The Holliday junction is a key DNA intermediate in the process of genetic recombination. It consists of two double-helical domains composed of homologous strands that flank a branch point; two of the strands are roughly helical, and two form the crossover between the helices. RuvC is a Holliday junction resolvase that cleaves the helical strands at a symmetric sequence, leading to the production of two recombinant molecules. We have determined the position of the cleavage site relative to the crossover point by the use of symmetric immobile junctions; these are DNA molecules containing two crossover points, one held immobile by sequence asymmetry and the second a symmetric sequence, but held immobile by torsional coupling to the first junction. We have built five symmetric immobile junctions, in which the tetranucleotide recognition site is moved stepwise relative to the branch point. We have used kinetic analysis of catalysis, gel retardation, and hydroxyl radical hypersensitivity to analyze this system. We conclude that the internucleotide linkage one position 3' to the crossover point is the favored site of cleavage.     

Single strand DNA cleavage reaction of duplex DNA by Drosophila topoisomerase II

A unique reaction for type II DNA topoisomerase is its cleavage of a pair of DNA strands in concert. We show however, that in a reaction mixture containing a molar excess of EDTA over Mg2+, or when Mg2+ is substituted by Ca2+, Mn2+, or Co2+, the enzyme cleaves only one rather than both strands. These results suggest that the divalent cations may play an important role in coordinating the two subunits of DNA topoisomerase II during the strand cleavage reaction. The single strand and the double strand cleavage reactions are similar in the following aspects: both require the addition of a protein denaturant, can be reversed by low temperature or high salt, and a topoisomerase II molecule is attached covalently to the 5' phosphoryl end of each broken DNA strand. Furthermore, the single strand cleavage sites share a similar sequence preference with double strand cleavage sites. There is, however, a strand bias for the single strand cleavage reaction. We show also that under single strand cleavage conditions, topoisomerase II still possesses a low level of double strand passage activity: it can introduce topological knots into both covalently closed or nicked DNA rings, and change the linking number of a plasmid DNA by steps of two. The implication of this observation on the sequential cleavage of the two strands of the DNA duplex during the normal DNA double strand passage process catalyzed by type II DNA topoisomerases is discussed.