Evaluation of two different Concanavalin A affinity adsorbents for the adsorption of glucose oxidase

Concanavalin A (Con A) was selected as ligand and thus immobilized onto two different supports, namely the polymeric Toyopearl and the inorganic silica, with the protection of its binding sites provided during the coupling procedure. The prepared Con A affinity adsorbents were then employed to evaluate their adsorption behaviour for the enzyme glucose oxidase (GOD). The immobilization kinetics showed that the immobilization of Con A on silica supports was much faster than that on Toyopearl supports, which could highly reduce the possibility of the denaturation of Con A. The optimal adsorption conditions for binding of GOD onto the ligand were determined in terms of the pH value and the ionic strength of the adsorption medium. The adsorption isotherms for binding GOD onto two Con A affinity adsorbents fitted well with the Langmuir equation. The maximum adsorption capacity q(m) of Toyopearl Con A and silica Con A were 7.9 mg/ml and 4.9 mg/ml, with a dissociation constant K(d) of 4.8 x 10(-7)M and 2.6 x 10(-6)M, respectively. Due to the less diffusive resistance, silica Con A showed both higher adsorption and desorption rates for GOD when compared with Toyopearl Con A. The nonspecific adsorption of GOD was less than 8% for both end-capped Toyopearl and silica supports. The dynamic adsorption of GOD for five times repeated processes showed a high stability for both prepared adsorbents. All the results indicate a good suitability of both Con A adsorbents for affinity adsorption of GOD.     

Interaction of human immunoglobulin G with l-histidine immobilized onto poly(ethylene vinyl alcohol) hollow-fiber membranes

l-Histidine as pseudobiospecific ligand was immobilized onto poly(ethylene vinyl alcohol) hollow-fiber membranes to obtain an affinity support for immunoglobulin G (IgG) purification. The interaction of human IgG with the affinity membranes was studied by chromatography and equilibrium binding analysis. Adsorption was possible over a broad pH range and was found to depend strongly on the nature of the buffer ions rather than on ionic strength. With zwitterionic buffers like morpholinopropanesulfonic acid (Mops) and hydroxyethylpiperazineethanesulfonic acid (Hepes), much higher adsorption capacities were obtained than with other buffers like Tris-HCl and phosphate buffers. An inhibition analysis revealed that non-zwitterionic buffers competitively inhibit IgG binding, whereas Mops and Hepes in their zwitterionic form do not. By choosing the appropriate buffer system, it was possible to adsorb specifically different IgG subsets. The IgG molecules were found to adsorb on membrane immobilized histidine via their F_ab part. Determination of dissociation constants at different temperatures allowed calculation of thermodynamic adsorption parameters. Decrease in K_D with increasing temperature and a positive entropy value between 20 and 35°C (in Mops buffer) indicated that adsorption is partially governed by hydrophobic forces in that temperature range, whereas at lower temperatures, electrostatic forces are more important for adsorption.     

Adsorption of glycinin and β-conglycinin on silica and cellulose: surface interactions as a function of denaturation, pH, and electrolytes

Soybean proteins have found uses in different nonfood applications due to their interesting properties. We report on the kinetics and extent of adsorption on silica and cellulose surfaces of glycinin and β-conglycinin, the main proteins present in soy. Quartz crystal microgravimetry (QCM) experiments indicate that soy protein adsorption is strongly affected by changes in the physicochemical environment. The affinity of glycinin and the mass adsorbed on silica and cellulose increases (by ca. 13 and 89%, respectively) with solution ionic strength (as it increases from 0 to 100 mM NaCl) due to screening of electrostatic interactions. In contrast, β-conglycinin adsorbs on the same substrates to a lower extent and the addition of electrolyte reduces adsorption (by 25 and 57%, respectively). The addition of 10 mM 2-mercaptoethanol, a denaturing agent, reduces the adsorption of both proteins with a significant effect for glycinin. This observation is explained by the cleavage of disulfide bonds which allows unfolding of the molecules and promotes dissociation into subunits that favors more compact adsorbed layer structures. In addition, adsorption of glycinin onto cellulose decreases with lowering the pH from neutral to pH 3 due to dissociation of the macromolecules, resulting in flatter adsorbed layers. The respective adsorption isotherms fit a Langmuir model and QCM shifts in energy dissipation and frequency reveal multiple-step kinetic processes indicative of changes in adlayer structure.     

Mg2+-dependent interaction of DNA with eukaryotic cells

Interaction of DNA with eukaryotic cells under conditions similar to those providing DNA adsorption onto liposomes was studied. It was revealed that mouse fibroblasts (line A9) and myeloma cells bind phage and plasmid DNA in 0.3 M sucrose solution containing Mg2+-ions. Additional pretreatment of the cells by trypsin did not affect DNA adsorption efficiency. The major part of the adsorbed DNA recovered by salt treatment of the cells, but 10-15% of DNA was found to be irreversible. Up to 50% of the irreversibly bound DNA molecules retain their linear size after treatment of cells with DNAse I. Efficiencies of DNA adsorption and irreversibly binding depend on the concentration of Mg2+ in the medium. The process of DNA irreversible binding is not inhibited by drugs affecting cell metabolism. It is assumed that DNA adsorbs onto the phospholipid domains of the cell membrane, and part of the adsorbed DNA is taken up into the interior of the cells.     

Specific inhibition by cyclodextrins of raw starch digestion by fungal glucoamylase.

alpha-, beta-, and gamma-cyclodextrins (CDs) completely inhibited raw starch digestion by glucoamylase I (GA I, MW 90,000) from Aspergillus awamori var. kawachi, and inhibited by 85% the raw starch adsorption of GA I at the CD concentrations of 1-5 mM. CDs at 1-5 mM did not inhibit gelatinized starch hydrolysis by GA I, but at the concentration of 50 mM, they inhibited such hydrolysis slightly. GA I was specifically adsorbed onto CD-Sepharose 6B, but glucoamylase I' (GA I', MW 73,000), which does not adsorb onto or digest raw starch, from the same strain was not adsorbed onto that gel. The adsorption of the glucoamylases onto raw starch and CD-Sepharose 6B was correlated to their digestion of raw starch. The hydrophobic adsorption of GA I onto CDs and raw starch occurred competitively at the Cp region, which is on the C-terminal side of Gp-I in the site for raw starch affinity of GA I, and inclusion complexes were formed.     

Evaluation of cellulose-based biospecific adsorbents as a stationary phase for lectin affinity chromatography

Macroporous cellulose Granocel was evaluated as a matrix for the immobilization of two lectins Concanavalin A (ConA) (108 kDa) and Wheat Germ Agglutinin (WGA) (36 kDa). Two different methods were employed for the immobilization of the lectins via their protein moieties by a Schiff's bases reaction. One of them results in covalent coupling of the lectin directly to the support and the other gives the attachment through a long spacer arm which benefits the immobilization of voluminous ConA molecules. The adsorbents were characterized by the glycoproteins sorption recording adsorption kinetic data and isotherms. The adsorbents demonstrated high affinity to glycoproteins with a sorption capacity in the column up to 7.4 mg/ml support and a high recovery (up to 93%). The adsorption isotherms of glucose oxidase (GOD) onto ConA adsorbents reveals an adsorption behavior with high and low affinity binding sites. The dissociation constant K(d) of the ligand-sorbate complex is approximately 1 x 10(-6) and 0.4 x 10(-5)M, respectively. It was supposed that the second step is related to the sorption of solvated GOD onto already adsorbed GOD forming sorbate dimers.     

The enzymatic hydrolysis rate of cellulose decreases with irreversible adsorption of cellobiohydrolase I

Protein adsorption onto solid substrates usually takes place in an irreversible fashion and this irreversible adsorption also occurs in some enzymatic reactions. In this work the adsorption behavior of intact β-1, 4-glucan-cellobiohydrolase (CBH I) from Trichoderma reesei onto microcrystalline cellulose was monitored by surface plasmon resonance and UV-spectral method. It was found that there existed reversible binding and irreversible binding of CBH I during its interaction with cellulose substrate. To evaluate the influence of adsorption on cellulose enzymatic hydrolysis, the reaction dynamics on pure cellulose were determined. A plot of the hydrolysis rate against the surface density of irreversibly adsorbed CBH I, revealed an inverse relationship in which an apparent decrease in the hydrolysis rate was observed with increasing surface density. Taken together, results presented here should be useful for modifying the binding characteristics of CBH I and making them more effective in cellulose hydrolysis.     

Isolation and Characterization of an Anaerobic, Cellulolytic Bacterium, Clostridium cellulovorans sp. nov

Insoluble lauryl pyridinium iodide [C12(50)] was synthesized as an antimicrobial agent. Escherichia coli cells were not killed by C12(50) but only adsorbed onto it. Though cells on C12(50) could not grow in nutrient agar, they possessed the ability to develop once they were liberated from C12(50). The adsorption of cells onto C12(50) was inhibited by iodide anions released from C12(50) itself. The ability of C12(50) to adsorb was decreased by the adsorbed cells, but C12(50) could be reactivated by washing with alkaline solutions. It was, therefore, suggested that this adsorption was mainly due to the electrostatic interaction between cells and C12(50). The adsorption of cells onto C12(50) was confirmed by scanning electron microscopy.     

Isolation and Characterization of an Anaerobic, Cellulolytic Bacterium, Clostridium cellulovorans sp. nov

Insoluble lauryl pyridinium iodide [C12(50)] was synthesized as an antimicrobial agent. Escherichia coli cells were not killed by C12(50) but only adsorbed onto it. Though cells on C12(50) could not grow in nutrient agar, they possessed the ability to develop once they were liberated from C12(50). The adsorption of cells onto C12(50) was inhibited by iodide anions released from C12(50) itself. The ability of C12(50) to adsorb was decreased by the adsorbed cells, but C12(50) could be reactivated by washing with alkaline solutions. It was, therefore, suggested that this adsorption was mainly due to the electrostatic interaction between cells and C12(50). The adsorption of cells onto C12(50) was confirmed by scanning electron microscopy.     

Utilization of ground eggshell waste as an adsorbent for the removal of dyes from aqueous solution

The adsorption of cationic basic blue 9 and anionic acid orange 51 from aqueous solution onto the calcified eggshell (ES) and its ground eggshell powder (ESP) was carried out by varying the process parameters such as agitation speed, initial dye concentration, adsorbent mass and temperature. The adsorption potential for basic blue 9 onto ESP is far lower than that for acid orange 51, mainly due to the ionic interaction between the acid dye with the sulfonate groups and the positively charged sites on the surface of ESP. The adsorption capacity of acid orange 51 onto ES is significantly smaller than that onto ESP, which is in line with their pore properties (i.e., 1 vs. 21 m(2)/g). The experimental results showed that the adsorption process can be well described with a simple model, the pseudo-second-order model. According to the equilibrium adsorption capacity from the fitting of pseudo-second order reaction model, it was further found that the Freundlich model yields a somewhat better fit than the Langmuir model in the adsorption of acid orange 51 onto ESP. In addition, an increase in adsorption temperature from 15 to 45 degrees C significantly enhances the adsorption capacity of acid orange 51 onto ESP, revealing that the adsorption should be an endothermic or chemisorption process. From the results, it is feasible to utilize the ground eggshell waste as an effective adsorbent for removal of anionic dye from aqueous solution.     

Effects of dexamethasone and chlorpromazine treatment on X-Y dissociation and multinucleated giant cell formation in hyperthermic mice

The effects of anti-stress drugs on X-Y dissociation and multinucleated giant cell formation in the testes of hyperthermic mice were determined for the possible use of such drugs in animal production. Mice were injected with dexamethasone 1 mg/kg or 2 mg/kg, chlorpromazine 1 mg/kg or 4 mg/kg, or 0.85% saline, and heat stressed for 4 d at 35 +/- 1 C and 65 +/- 1 % relative humidity. Mice were killed 5 d after stress, and the testes processed for observation of meiotic chromosomes and testicular histology. Heat stress caused a significant increase in X-Y bivalent dissociation in diakinesis-metaphase I spermatocytes and a significant increase in formation of multinucleated giant cells. Drug treatment increased X-Y dissociation but had no significant effect on giant cell formation.     

Equilibria for the adsorption of antibiotics onto neutral polymeric sorbents: Experimental and modeling studies

The objective of this work was to study the equilibria for adsorption of three antibiotics (penicillin V, tetracycline, and cephalosporin C) from water onto commercially available neutral polymeric sorbents. The pH was observed to be an important factor in adsorption as our results suggest that the neutral forms of penicillin V and cephalosporin C are preferentially adsorbed onto the neutral sorbents. Also, sorbent surface chemistry was observed to be important for adsorption, as the antibiotics adsorbed more favorably (both in terms of affinities and enthalpies) onto the aromatic sorbent as compared to the aliphatic ester sorbent. In addition to these thermodynamic measurements, molecular modeling studies and Monte Carlo simulations suggest that adsorption onto aromatic sorbents may involve specific interactions between the planar regions of the antibiotic molecules and the phenyl rings of the aromatic sorbent. The interaction energies predicted from Monte Carlo simulations were observed to provide qualitative agreement with experimentally determined adsorption affinities. (c) 1995 John Wiley & Sons, Inc.     

Dissociation coefficients of protein adsorption to nanoparticles as quantitative metrics for description of the protein corona: A comparison of experimental techniques and methodological relevance

Protein adsorption to nanoparticles is described as a chemical reaction in which proteins attach to binding sites on the nanoparticle surface. This process is defined by a dissociation coefficient, which tells how many proteins are adsorbed per nanoparticle in dependence of the protein concentration. Different techniques to experimentally determine dissociation coefficients of protein adsorption to nanoparticles are reviewed. Results of more than 130 experiments in which dissociation coefficients have been determined are compared. Data show that different methods, nanoparticle systems, and proteins can lead to significantly different dissociation coefficients. However, we observed a clear tendency of smaller dissociation coefficients upon less negative towards more positive zeta potentials of the nanoparticles. The zeta potential thus is a key parameter influencing protein adsorption to the surface of nanoparticles. Our analysis highlights the importance of the characterization of the parameters governing protein–nanoparticle interaction for quantitative evaluation and objective literature comparison.     

Adsorption kinetics of azinphosmethyl from aqueous solution onto pyrolyzed Horseshoe sea crab shell from the Atlantic Ocean

The adsorption behavior of azinphosmethyl on pyrolyzed Horseshoe Crab (Limulus polyphemus) outer shell, as a residue, from the Atlantic Ocean, collected along the Maine coast, USA, has been studied with regards to its kinetic and equilibrium conditions, taking into account adsorbate concentrations of 2 x 10(-3), 4 x 10(-3), 6 x 10(-3), and 8 x 10(-3), as well as temperatures of 30 degrees C, 40 degrees C, 50 degrees C, and 60 degrees C. The yield of adsorption of azinphosmethyl from aqueous solution ranged from 56.1% to 61% with temperature increasing. Kinetic studies showed that adsorption rate decreased as the initial azinphosmethyl concentration increased. It was found, that the adsorption reaction obeyed first-order kinetics. The overall rate constants were estimated for different temperatures. The activation energy for adsorption was about 1.52 kJmol(-1), which implies that azinphosmethyl mainly adsorbed physically onto Horseshoe Crab outer shell. Langmuir and Freundlich isotherms were applied to the experimental data and isotherm constants were calculated. The thermodynamic parameters DeltaG0, DeltaH0 and DeltaS0 for the adsorption reaction were evaluated based on equilibrium data and in connection with this result the thermodynamic aspects of adsorption reaction were discussed. The adsorption was found to be endothermic in nature. The adsorbent used in this study proved highly efficient for the removal of azinphosmethyl.     

Computational investigation of the adsorption of carbon dioxide onto zirconium oxide clusters

A theoretical investigation of the adsorption of CO(2) onto ZrO(2) is presented. Various cluster models were used to mimic different basic and acidic sites on the surface. The method used was the density functional theory with the generalized gradient approximation and including Grimme's empirical model in order to properly describe the weak interactions that may occur between the adsorbate and the surface. We found that the adsorption at sites exhibiting two adjacent unsaturated zirconium atoms led to either the exothermic dissociation of CO(2) or to a strongly physisorbed state. By contrast, on a single unsaturated zirconium, CO(2) was adsorbed in an apical manner. In this case, the molecule is highly polarized and the adsorption energy amounts to -64.6?kJ?mol(-1). Finally, the weakest adsorption of CO(2) occurred on the basic OH sites on the surface.     

X-Y chromosome univalency in the testes of hyperthermic mice: II. Light and electron microscopic analysis of synaptonemal complexes

Hyperthermia-induced X-Y dissociation has been observed in diakinesis-metaphase I sper-matocytes but not in pachytene spermatocytes, which have been implicated as highly susceptible to heat stress. To determine X-Y dissociation in pachytene spermatocytes and to compare levels of dissociation between pachytene and diakinesis-metaphase I spermatocytes male ICR mice were exposed to 35°C ± 0.07°C and 65% ± 0.14% relative humidity for 2 or 4 days. Control mice were housed at 24°C ± 0.04°C and 43% ± 0.58% relative humidity. Mice were killed 0, 3, 5, 8, or 10 days after stress and the testes processed for meiotic chromosome display at diakinesis-metaphase I and synaptonemal complex display at pachynema. Twenty-five to thirty cells per mouse at both stages of meiosis were observed with light microscopy, and pachytene spreads with transmission electron microscopy to determine heat-stress effects on synaptonemal complex structure. Statistical analyses revealed significant linear increases in X-Y dissociation with prolonged exposure to heat at pachynema and diakinesis-metaphase I. Levels of pachytene dissociation were one-half the levels of dissociation at diakinesis-metaphase I. The resolvable structure of the lateral elements of the synaptonemal complex was not affected by heat stress.     

Effect of organic Cr(III) complexes on chromium speciation

Abstract

Chromium speciation in the presence of organic chromium(III) complexes was investigated using solid-phase extraction. The adsorptions of Cr(VI) and Cr(III) on alumina and pumice powder were studied. Maximum sorption of Cr(VI) was obtained by alumina (90.22%), while Cr(III) was highly adsorbed onto pumice powder (86.65%). This result shows that pumice may be a new and promising adsorbent for Cr(III). The experimental equilibrium data for Cr(VI) adsorption onto alumina and Cr(III) sorption onto pumice were analysed using Langmuir and Freundlich isotherms. The separation and adsorption of Cr(VI), Cr(III) and five organic chromium(III) complexes onto pumice and alumina at different pH values were evaluated. Ethylenediaminetetraacetate (EDTA), oxalate, citrate, glycine, alanine and 8-hydroxyqinoline were used as ligands. Sorption of alanine and ethylenediaminetetraacetate complexes was higher onto alumina than pumice at pH>3. The enhancement of adsorption of chromium(III) complexes onto pumice was achieved by surface modification of pumice using a surfactant, namely hexadecyltrimethylammoniumbromür (HDTMA). The presence of surfactant enhanced the adsorption of Cr(III) citrate, oxalate, glycine and 8-hydroxyquinoline complexes onto pumice. However, the adsorption of EDTA and alanine complexes decreased, with ratio of 13.40% and 4.00% respectively. Here we demonstrate that chromium speciation methods depending on adsorption onto various adsorbents including alumina may lead erroneous results. Analytical measurements were performed by flame AAS, data were obtained by standard addition method.     

Interaction of beta-cyclodextrin with the granular starch binding domain of glucoamylase

The granular starch binding domain of glucoamylase 1 (EC 3.2.1.3 1,4-alpha-D-glucan glucohydrolase) binds two molecules of beta-cyclodextrin, with a dissociation constant (Kd) for the second ligand of 1.68 microM. The catalytic domain showed no interaction with beta-cyclodextrin. Beta-cyclodextrin competitively inhibited the adsorption of the binding domain onto granular starch with an inhibition constant (Ki) of 11.0 +/- 1.9 microM. The results show that beta-cyclodextrin binds to the binding domain of glucoamylase at the same site(s) as granular starch.     

Adsorption of a xylanase purified from Pulpzyme HC onto alkali-lignin and crystalline cellulose

Adsorption of a xylanase purified from a commercial xylanase, Pulpzyme HC, onto two model components of kraft pulp, crystalline cellulose (Avicel) and alkali-lignin (Indulin AT), was studied at 40°C. A considerable amount of the purified xylanase was adsorbed onto alkali-lignin in alkaline solutions. The adsorption of the purified xylanase onto crystalline cellulose was not significant and could be described by the Langmuir-type adsorption isotherm. The adsorption of the purified xylanase onto alkali-lignin was assumed to be caused by physical or van der Waals interaction based on the result that NaCl did not change the adsorption isotherm. © Rapid Science Ltd. 1998     

Adsorption from saliva to silica and hydroxyapatite surfaces and elution of salivary films by SDS and delmopinol

The adsorption of proteins from human whole saliva (HWS) onto silica and hydroxyapatite surfaces (HA) was followed by quartz crystal microbalance with dissipation (QCM-D) and ellipsometry. The influence of different surface properties and adsorption media (water and PBS) on the adsorption from saliva was studied. The viscoelastic properties of the salivary films formed on the solid surfaces were estimated by the use of the Voigt-based viscoelastic film model. Furthermore, the efficiency of SDS and delmopinol to elute the adsorbed salivary film from the surfaces was investigated at different surfactant concentrations. A biphasic kinetic regime for the adsorption from saliva on the silica and HA surfaces was observed, indicating the formation of a rigidly coupled first layer corresponding to an initial adsorption of small proteins and a more loosely bound second layer. The results further showed a higher adsorption from HWS onto the HA surfaces compared to the silica surfaces in both adsorption media (PBS and water). The adsorption in PBS led to higher adsorbed amounts on both surfaces as compared to water. SDS was found to be more efficient in removing the salivary film from both surfaces than delmopinol. The salivary film was found to be less tightly bound onto the silica surfaces since more of the salivary film could be removed with both SDS and delmopinol compared to that from the HA surface. When adsorption took place from PBS the salivary layer formed at both surfaces seemed to have a similar structure, with a high energy dissipation implying that a softer salivary layer is built up in PBS as opposed to that in water. Furthermore, the salivary layers adsorbed from water solutions onto the HA were found to be softer than those on silica.