An organic solvent–tolerant lipase from Streptomyces sp. CS133 for enzymatic transesterification of vegetable oils in organic media

The enzymatic route for biodiesel production has been noted to be cost ineffective due to the high cost of biocatalysts. Reusing the biocatalyst for successive transesterification cycles is a potential solution to address such cost inefficiency. However, when organic solvent like methanol is used as acyl-acceptor in the reaction, the biocatalyst (lipase) gets severely inactivated due to the inhibitory effect of undissolved methanol in the reaction medium. Thus, organic solvent–tolerant lipase is highly desirable for enzymatic transesterification. In response to such desirability, a lipase (LS133) possessing aforesaid characteristic was extracted from Streptomyces sp. CS133. Relative molecular mass of the purified LS133 was estimated to be 39.8 kDa by SDS-PAGE. Lipase LS133 was stable in pH range 5.0–9.0 and at temperature lower than 50 °C while its optimum lipolytic activity was achieved at pH 7.5 and 40 °C. It showed the highest hydrolytic activity towards long chain p-nitrophenyl palmitate with K_m and V_max values of 0.152 mM and 270.2 mmol min^?1 mg^?1, respectively. It showed non-position specificity for triolein hydrolysis. The first 15 amino acid residues of its N-terminal sequence, AIPLRQTLNFQAXYQ, were noted to have partial similarity with some of the previously reported microbial lipases. Its catalytic involvement in biodiesel production process was confirmed by performing enzymatic transesterification of vegetable oils with methanol.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

Pretreatment of immobilized Candida sp. 99-125 lipase to improve its methanol tolerance for biodiesel production

Candida sp. 99-125 lipase immobilized on textile membrane was pretreated with several methods to improve its activity and methanol tolerance for biodiesel production. Lipase pretreatments with short chain alcohols from n-propyl alcohol to isobutyl alcohol did not have any positive effect on the lipase activity and methanol tolerance. While lipase treated with methanol solutions from 10 to 20% volume concentrations did enhance the enzyme activity and methanol tolerance, and this lipase activation effect did not exist when methanol volume concentration was 40%. 1 mM salt solutions of (NH₄)₂SO₄, CaCl₂, KCl, K₂SO₄ and MgCl₂ pretreatments were the useful tools to improve the lipase activity and methanol tolerance. The reason might be that salts could incorporate with the protein molecular to form a more stable molecular to resist conformation change induced by high methanol concentration. The operational stability of pretreated lipase was improved dramatically for biodiesel production during batch reactions.     

Kinetics of lipase recovery from the aqueous phase of biodiesel production by macroporous resin adsorption and reuse of the adsorbed lipase for biodiesel preparation

A commercial macroporous resin (D3520) was screened for lipase recovery by adsorption from the aqueous phase of biodiesel production. The influences of several factors on the adsorption kinetics were investigated. It was found that the kinetic behavior of lipase adsorption by macroporous resin could be well described by pseudo-first-order model. Temperature had no significant effects on lipase adsorption, while resin-to-protein ratio (R) significantly affected both rate constant (k₁) and equilibrium adsorption capacity (Q_e). No lipase was adsorbed when mixing (shaking) was not performed; however, protein recovery reached 98% after the adsorption was conducted at 200 rpm for 5 h in a shaker. The presence of methanol and glycerol showed significant negative influence on lipase adsorption kinetics. Particularly, increasing glycerol concentration could dramatically decrease k₁ but not impact Q_e. Biodiesel was found to dramatically decrease Q_e even present at a concentration as low as 0.02%, while k₁ was found to increase with biodiesel concentration. The adsorbed lipase showed a relatively stable catalytic activity in tert-butanol system, but poor stability in solvent-free system when used for biodiesel preparation. Oil and biodiesel were also found to adsorb onto resin during transesterification in solvent-free system. Therefore, the resin had to be washed by anhydrous methanol before re-used for lipase recovery.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

Improvement in lipase-catalyzed methanolysis of triacylglycerols for biodiesel production using a solvent engineering method

A solvent engineering strategy was applied to the lipase-catalyzed methanolysis of triacylglycerols for biodiesel production. The effect of different pure organic solvents and co-solvent mixtures on the methanolysis was compared. The substrate conversions in the co-solvent mixtures were all higher than those of the corresponding pure organic solvents. Further study showed that addition of co-solvent decreased the values of |log P_interface − log P_substrate| and thus led to a faster reaction. The more the values of |log P_interface − log P_substrate| decreased, the faster the reaction proceeded and the higher the conversion attained. Different co-solvent ratio was further investigated. The co-solvent mixture of 25% t-pentanol:75% isooctane (v/v) was optimal, with which both the negative effects caused by excessive methanol and by-product glycerol could be eliminated. There was no obvious loss in lipase activity even after being repeatedly used for 60 cycles (720 h) with this co-solvent mixture as reaction medium. Other lipases and lipase combinations can also catalyze methanolysis in this co-solvent mixture. Furthermore, other vegetable oils were also explored for biodiesel production in this co-solvent mixture and it had been found that this co-solvent mixture media has extensive applicability.     

The study on effective immobilization of lipase on functionalized bentonites and their properties

Three different functionalized bentonites including acid activated bentonite (B_a), organically modified bentonite with cetyltrimethyl ammonium bromide (B_CTMAB) and the composite by acid activation and organo-modification (B_a-CTMAB) were prepared, and used for immobilization of lipase from bovine pancreatic lipase by adsorption. The amount of lipase adsorbed on the functionalized bentonites was in the following sequence: B_a > B_CTMAB > B_a-CTMAB, showing the strongest affinity of B_a for lipase among the three supports. However, the immobilized lipase on B_a-CTMAB showed the highest activity in the hydrolysis of olive oil by 1.67 times of activity of free lipase due to the hydrophobically interfacial activation and enlarged catalytic interface. While, the activity of immobilized lipase on B_a was lower than 20% of free lipase’s activity due to the absence of hydrophobic activation and negative impact of excessive hydrogen ions on the surface. The K_m values for the immobilized lipase on B_a-CTMAB (0.054 g/mL) and B_CTMAB (0.074 g/mL) were both lower than that of free lipase (0.115 g/mL), and the V_max values were higher for the immobilized lipases, exhibiting a higher affinity of the immobilized lipase toward olive oil than free lipase. In comparison to free lipase, the better resistance to heating inactivation, storage stability and reusability of the immobilized lipases on B_a-CTMAB and B_CTMAB were also obtained. The results show that the efficient and stable biocatalysts for industrial application can be prepared by using the low-cost bentonite mineral as the supports.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

Increased production of FAEEs for biodiesel with lipase enhanced Saccharomyces cerevisiae

In this study, we expressed lipase 2 from Candida sp. 99-125 in Saccharomyces cerevisiae, and tried direct biodiesel production. Driven by 3-phosphoglycerate kinase promoter, Lip2 showed high expression level in cytoplasm. SDS-PAGE analysis confirmed the successful lipase expression with a 40 kDa molecular weight. The enzyme assay indicated that lipase 2 had a specific activity of 12.12 μmol/min/mg toward p-nitrophenyl palmitate. Gas chromatography showed that the main fatty acids of S. cerevisiae lipids were palmitoleic acid (31.79%) and oleic acid (29.84%). By three-step addition of 4% ethanol to culture broth, the yield of fatty acid ethyl esters by recombinant S. cerevisiae reached 11.4 mg/g dry cell weight. This work proposed a novel pathway for S. cerevisiae that could be applied for producing biodiesel directly.     

Enzymatic synthesis of fatty acid methyl esters from lard with immobilized Candida sp. 99-125

In this paper, immobilized lipase catalyzed biodiesel production from lard was studied. Using Candida sp. 99-125, the effect of temperature, water content, enzyme amount, solvent and three-step methanolysis were investigated. The optimal conditions for processing 1 g of lard were: 0.2 g immobilized lipase, 8 ml n-hexane as solvent, 20% water based on the fat weight, temperature 40 °C, and three-step addition of methanol. As a result, the fatty acid methyl esters (FAMEs) yield was 87.4%. The lipase was proved to be stable when used repeatedly for 180 h.     

Combination of two lipases more efficiently catalyzes methanolysis of soybean oil for biodiesel production in aqueous medium

A combination of two lipases was employed to catalyze methanolysis of soybean oil in aqueous medium for biodiesel production. The two lipase genes were cloned from fungal strains Rhizomucor miehei and Penicillium cyclopium, and each expressed successfully in Pichia pastoris. Activities of the 1,3-specific lipase from R. miehei (termed RML) and the non-specific mono- and diacylglycerol lipase from P. cyclopium (termed MDL) were 550 U and 1545 U per ml respectively, and enzymatic properties of these supernatant of fermentation broth (liquid lipase) were stable at 4 °C for >3 months. Under optimized conditions, the ratio of biodiesel conversion after 12 h at 30 °C, using RML alone, was 68.5%. When RML was assisted by addition of MDL, biodiesel conversion ratio was increased to >95% under the same reaction conditions. The results suggested that combination of lipases with different specificity, for enzymatic conversion of more complex lipid substrates, is a potentially useful strategy for biodiesel production.     

Ring-opening polymerization of ɛ-caprolactone catalyzed by a novel thermophilic esterase from the archaeon Archaeoglobus fulgidus

The ring-opening polymerization of ?-caprolactone catalyzed by a novel thermophilic esterase from the archaeon Archaeoglobus fulgidus was successfully conducted in organic solvents. The effects of enzyme concentration, temperature, reaction time, reaction medium, and water activity on monomer conversion and product molecular weight were investigated. Poly(?-caprolactone) was obtained in almost 100% of the monomer conversion, with a number-average molecular weight of 1400 in toluene at 80 °C for 72 h. Furthermore, the Michaelis–Menten kinetic analysis showed that the enzyme had the highest affinity for ?-caprolactone, with a K_m value of 0.093 mol/l compared with other reported lipases. The possible structural and energetic effects of the enzyme on the K_m value were investigated, using molecular docking studies.     

Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology

Microbial lipase from Thermomyces lanuginosus (formerly Humicola lanuginosa) was immobilized by covalent binding on a novel microporous styrene–divinylbenzene polyglutaraldehyde copolymer (STY–DVB–PGA). The response surface methodology (RSM) was used to optimize the conditions for the maximum activity and to understand the significance and interaction of the factors affecting the specific activity of immobilized lipase. The central composite design was employed to evaluate the effects of enzyme concentration (4–16%, v/v), pH (6.0–8.0), buffer concentration (20–100 mM) and immobilization time (8–40 h) on the specific activity. The results indicated that enzyme concentration, pH and buffer concentration were the significant factors on the specific activity of immobilized lipase and quadratic polynomial equation was obtained for specific activity. The predicted specific activity was 8.78 μmol p-NP/mg enzyme min under the optimal conditions and the subsequent verification experiment with the specific activity of 8.41 μmol p-NP/mg enzyme min confirmed the validity of the predicted model. The lipase loading capacity was obtained as 5.71 mg/g support at the optimum conditions. Operational stability was determined with immobilized lipase and it indicated that a small enzyme deactivation (12%) occurred after being used repeatedly for 10 consecutive batches with each of 24 h. The effect of methanol and tert-butanol on the specific activity of immobilized lipase was investigated. The immobilized lipase was almost stable in tert-butanol (92%) whereas it lost most of its activity in methanol (80%) after 15 min incubation.     

Purification and characterization of trans-3-(4-methoxyphenyl) glycidic acid methyl ester hydrolyzing lipase from Pseudomonas aeruginosa

Enantiospecific lipase was purified from Pseudomonas aeruginosa MTCC 5113 and it was used for the hydrolysis of (±)-methyl trans-3(4-methoxyphenyl) glycidate, a key intermediate in the synthesis of cardiovascular drug, diltiazem. Enzyme from broth supernatant was precipitated with acetone and purified by anion exchange and gel filtration chromatography. The purified lipase was a homogenous protein having a molecular weight of 59.4 kDa as determined by SDS-PAGE. Isoelectric point was found to be approximately 5.5 after 2D electrophoresis. This organic solvent tolerant enzyme was found to be active in presence of EDTA, Tween-80 and β-mercaptoethanol whereas sodium dodecyl sulphate and dithiothreitol inhibited its activity. The K_m and V_max of the enzyme were 50 mM and 27.1 μmol/min mg, respectively using p-nitrophenyl palmitate as a substrate. The activity of lipase was confirmed by (±)-MPGM hydrolysis and zymography.     

Synthesis and monoamine transporter affinity of 3α-arylmethoxy-3β-arylnortropanes

A series of 3-arylnortrop-2-enes and 3α-arylmethoxy-3β-arylnortropanes were synthesized and evaluated for binding affinity at monoamine transporters. The 3-(3,4-dichlorophenyl)nortrop-2-ene (6e) exhibited high affinity for the SERT (K_i = 0.3 nM). The 3α-arylmethoxy-3β-arylnortropanes were generally SERT selective with the 3α-(3.4-dichlorophenylmethoxy)-3βphenylnortrop-2-ene (7c) possessing subnanomolar potency (K_i = 0.061 nM). However, 3α-(3,4-dichlorophenylmethoxy)-3β-phenylnortrop-2-ene (7b) exhibited high affinity at all three transporters [(DAT K_i = 22 nM), (SERT K_i = 6 nM) and (NET K_i = 101 nM)].     

Class II α-mannosidase from Aspergillus fischeri: Energetics of catalysis and inhibition

Energetics of the catalysis of Class II α-mannosidase (E.C.3.2.1.24) from Aspergillus fischeri was studied. The enzyme showed K_cat/K_m for Man (α1-3) Man, Man (α1-2) Man and Man (α1-6) Man as 7488, 5376 and 3690 M^?1 min^?1, respectively. The activation energy, E_a was 15.14, 47.43 and 71.21 kJ/mol for α1-3, α1-2 and α1-6 linked mannobioses, respectively, reflecting the energy barrier in the hydrolysis of latter two substrates. The enzyme showed K_cat/K_m as 3.56 × 10⁵ and 4.61 × 10⁵ M^?1 min^?1 and E_a as 38.7 and 8.92 kJ/mol, towards pNPαMan and 4-MeUmbαMan, respectively. Binding of Swainsonine to the enzyme is stronger than that of 1-deoxymannojirimycin.     

Hen egg white as a feeder protein for lipase immobilization

Enzyme stabilization via immobilization is one of the preferred processes as it provides the advantages of recovery and reusability. In this study, Thermomyces lanuginosus lipase has been immobilized through crosslinking using 2% glutaraldehyde and hen egg white, as an approach towards CLEA preparation. The immobilization efficiency and the properties of the immobilized enzyme in terms of stability to pH, temperature, and denaturants was studied and compared with the free enzyme. Immobilization efficiency of 56% was achieved with hen egg white. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0 whereas the pH optimum for free enzyme was at pH 6.0. The immobilized enzyme was stable at higher temperature retaining about 83% of its maximum activity as compared to the free enzyme retaining only 41% activity at 70 °C. The denaturation of lipase in free form was rapid with a half-life of 2 h at 60 °C and 58 min at 70 °C as compared to 12 h at 60 °C and 2 h at 70 °C for the immobilized enzyme. The effect of denaturants, urea and guanidine hydrochloride on the free and immobilized enzyme was studied and the immobilized enzyme was found to be more stable towards denaturants retaining 74% activity in 8 M urea and 98% in 6 M GndHCl as compared to 42% and 33% respectively in the case of free enzyme. The apparent K_m (2.08 mM) and apparent V_max (0.95 μmol/min) of immobilized enzyme was lower as compared to free enzyme; K_m (8.0 mM) and V_max (2.857 μmol/min). The immobilized enzyme was reused several times for the hydrolysis of olive oil.     

Purification and characterization of cyanogenic β-glucosidase from wild apricot (Prunus armeniaca L.)

β-Glucosidase catalyzes the sequential breakdown of cyanogenic glycosides in cyanogenic plants. The β-glucosidase from Prunus armeniaca L. was purified to 8-fold, and 20% yield was obtained, with a specific activity of 281 U/mg protein. The enzyme showed maximum activity in 0.15 M sodium citrate buffer, pH 6, at 35 °C with p-nitrophenylglucopyranoside as substrate. The β-glucosidase from wild apricot was used successfully for the saccharification of cellobiose into D-glucose. This enzyme has a V_max of 131.6 μmol min⁻¹ mg⁻¹ protein, K_m of 0.158 mM, K_cat of 144.8 s⁻¹, K_cat/K_m of 917.4 mM⁻¹ s⁻¹, and K_m/V_max of 0.0012 mM min mg μmole⁻¹, using cellobiose as substrate. The half-life, deactivation rate coefficient, and activation energy of this β-glucosidase were 12.76 h, 1.509 × 10⁻⁵ s⁻¹, and 37.55 kJ/mol, respectively. These results showed that P. armeniaca is a potential source of β-glucosidase, with high affinity and catalytic capability for the saccharification of cellulosic material.     

Regiospecific and conformationally restrained analogs of melphalan and dl-2-NAM-7 and their affinities for the large neutral amino acid transporter (system LAT1) of the blood–brain barrier

Regiospecific and conformationally restrained analogs of melphalan and dl-2-NAM-7 have been synthesized and their affinities for the large neutral amino acid transporter (LAT1) of the blood–brain barrier have been determined to assess their potential for accessing the CNS via facilitated transport. Several analogs had K_i values in the range 2.1–8.5 μM with greater affinities than that of either l-phenylalanine (K_i = 11 μM) or melphalan (K_i = 55 μM), but lower than dl-2-NAM-7 (K_i = 0.08 μM). The results indicate that regiospecific positioning of the mustard moiety on the aromatic ring in these analogs is very important for optimal affinity for the large neutral amino acid transporter, and that conformational restriction of the dl-2-NAM-7 molecule in benzonorbornane and indane analogs leads to 25- to 60-fold loss, respectively, in affinity.