An Efficient Catalytic DNA that Cleaves L-RNA

Many DNAzymes have been isolated from synthetic DNA pools to cleave natural RNA (D-RNA) substrates and some have been utilized for the design of aptazyme biosensors for bioanalytical applications. Even though these biosensors perform well in simple sample matrices, they do not function effectively in complex biological samples due to ubiquitous RNases that can efficiently cleave D-RNA substrates. To overcome this issue, we set out to develop DNAzymes that cleave L-RNA, the enantiomer of D-RNA, which is known to be completely resistant to RNases. Through in vitro selection we isolated three L-RNA-cleaving DNAzymes from a random-sequence DNA pool. The most active DNAzyme exhibits a catalytic rate constant ~3 min^-1 and has a structure that contains a kissing loop, a structural motif that has never been observed with D-RNA-cleaving DNAzymes. Furthermore we have used this DNAzyme and a well-known ATP-binding DNA aptamer to construct an aptazyme sensor and demonstrated that this biosensor can achieve ATP detection in biological samples that contain RNases. The current work lays the foundation for exploring RNA-cleaving DNAzymes for engineering biosensors that are compatible with complex biological samples.     

Coarse-Grained Brownian Dynamics Simulations of the 10-23 DNAzyme

Deoxyribozymes (DNAzymes) are single-stranded DNA that catalyze nucleic acid biochemistry. Although a number of DNAzymes have been discovered by in vitro selection, the relationship between their tertiary structure and function remains unknown. We focus here on the well-studied 10-23 DNAzyme, which cleaves mRNA with a catalytic efficiency approaching that of RNase A. Using coarse-grained Brownian dynamics simulations, we find that the DNAzyme bends its substrate away from the cleavage point, exposing the reactive site and buckling the DNAzyme catalytic core. This hypothesized transition state provides microscopic insights into experimental observations concerning the size of the DNAzyme/substrate complex, the impact of the recognition arm length, and the sensitivity of the enzymatic activity to point mutations of the catalytic core. Upon cleaving the pertinent backbone bond in the substrate, we find that the catalytic core of the DNAzyme unwinds and the overall complex rapidly extends, in agreement with experiments on the related 8-17 DNAzyme. The results presented here provide a starting point for interpreting experimental data on DNAzyme kinetics, as well as developing more detailed simulation models. The results also demonstrate the limitations of using a simple physical model to understand the role of point mutations.     

基于G4-配体的DNA模拟酶在生物传感中的发展与应用

鸟苷酸-四联体DNA (G4 DNA)是由富含串联重复鸟苷酸(G)的DNA或RNA序列形成的G4片层,并堆叠而成一类独特的核酸二级结构。G4 DNA结合多种特异性配体可形成具有催化过氧化氢活性的G4 DNA模拟酶(G4 DNAzyme)。由于G4 DNAzyme存在着序列构成简便灵活、适合多样传感平台检测等特点,其在新型生物传感方法研发、医学检测新技术研究等领域中应用前景广阔。本文主要依据G4 DNA结合配体的不同,对近年来新发展出的G4 DNAzyme进行分类与回顾,归纳为含氯化血红素(hemin)的G4-Hemin DNAzyme与非G4-Hemin DNAzyme。前者是目前G4 DNA模拟酶的研究主流——本文主要归纳了G4-Hemin DNAzyme在金属阳离子、生物小分子及生物大分子的检测分析方向上所取得的重要研究进展,并阐述其在生物传感领域的影响和优势;后者中的配体则主要包括金属阳离子N-甲基吗啡啉(4-methylmorpholine, NMM)、硫磺素T(thioflavin T,ThT)及新型金属配体(Cu²⁺Ce³⁺)等。...     

Detection of the strand exchange reaction using DNAzyme and Thermotoga maritima recombinase A

We have designed multiple detection systems for the DNA strand exchange process. Thermostable Thermotoga maritima recombinase A (TmRecA), a core protein in homologous recombination, and DNAzyme, a catalytic DNA that can cleave a specific DNA sequence, are introduced in this work. In a colorimetric method, gold nanoparticles (AuNPs) modified with complementary DNAs (cDNAs) were assembled by annealing. Aggregated AuNPs were then separated irreversibly by TmRecA and DNAzyme, leading to a distinct color change in the particles from purple to red. For the case of fluorometric detection, fluorescein isothiocyanate (FITC)-labeled DNA as a fluorophore and black hole quencher 1 (BHQ1)-labeled DNA as a quencher were used; successful strand exchange was clearly detected by variations in fluorescence intensity. In addition, alterations in the impedance of a gold electrode with immobilized DNA were employed to monitor the regular exchange of DNA strands. All three methods provided sufficient evidence of efficient strand exchange reactions and have great potential for applications in the monitoring of recombination, discovery of new DNAzymes, detection of DNAzymes, and measurement of other protein activities.     

DNAzyme-mediated catalysis with only guanosine and cytidine nucleotides

Single-stranded DNA molecules have the capacity to adopt catalytically active structures known as DNAzymes, although the fundamental limits of this ability have not been determined. Starting with a parent DNAzyme composed of all four types of standard nucleotides, we conducted a search of the surrounding sequence space to identify functional derivatives with catalytic cores composed of only three, and subsequently only two types of nucleotides. We provide the first report of a DNAzyme that contains only guanosine and cytidine deoxyribonucleotides in its catalytic domain, which consists of just 13 nucleotides. This DNAzyme catalyzes the Mn²⁺-dependent cleavage of an RNA phosphodiester bond ~5300-fold faster than the corresponding uncatalyzed reaction, but ~10 000-fold slower than the parent. The demonstration of a catalytic DNA molecule made from a binary nucleotide alphabet broadens our understanding of the fundamental limits of nucleic-acid-mediated catalysis.     

Efficient silencing of gene expression by an ASON-bulge-DNAzyme complex

Background

DNAzymes are DNA molecules that can directly cleave cognate mRNA, and have been developed to silence gene expression for research and clinical purposes. The advantage of DNAzymes over ribozymes is that they are inexpensive to produce and exhibit good stability. The “10-23 DNA enzyme” is composed of a catalytic domain of 15 deoxynucleotides, flanked by two substrate-recognition domains of approximately eight nucleotides in each direction, which provides the complementary sequence required for specific binding to RNA substrates. However, these eight nucleotides might not afford sufficient binding energy to hold the RNA substrate along with the DNAzyme, which would interfere with the efficiency of the DNAzyme or cause side effects, such as the cleavage of non-cognate mRNAs.

Methodology

In this study, we inserted a nonpairing bulge at the 5′ end of the “10–23 DNA enzyme” to enhance its efficiency and specificity. Different sizes of bulges were inserted at different positions in the 5′ end of the DNAzyme. The non-matching bulge will avoid strong binding between the DNAzyme and target mRNA, which may interfere with the efficiency of the DNAzyme.

Conclusions

Our novel DNAzyme constructs could efficiently silence the expression of target genes, proving a powerful tool for gene silencing. The results showed that the six oligo bulge was the most effective when the six oligo bulge was 12–15 bp away from the core catalytic domain.     

Studies of the activity of peroxidase-like DNAzyme by modifying 3'- or 5'-end of aptamers

In the presence of hemin and under appropriate conditions, some modalities of G-quadruplexes can form a peroxidase-like DNAzyme that has been widely used in biology. Structure-function studies on the DNAzyme revealed that its catalytic ability may be dependent on the unimolecular parallel G-quadruplex. In this report, we present the preliminary investigation on the relationship between the structure and function of DNAzymes through a terminal oligo modification in G-quadruplex sequences by adding different lengths of oligo-dT to the 3'- or 5'-end of the aptamers. The results suggested that adding dT(n) to the 5'-end of the DNA sequence of the enzyme improved the ability of hemin to bind with DNA, but the addition of dT(n) to the 3'-end decreased the binding ability of hemin for DNA. The increased stability of the assembled DNAzyme would lead to more favorable binding between the enzyme and substrate (H(2) O(2)), facilitating higher peroxidase activity; on the contrary, with lower stability of the DNAzyme complex, we observed reduced peroxidase activity.     

A "turn-on" fluorescent copper biosensor based on DNA cleavage-dependent graphene-quenched DNAzyme

A novel and promising "turn-on" fluorescent Cu(2+) biosensor is designed based on graphene-DNAzyme catalytic beacon. Due to the essential surface and quenching properties of two-dimensional graphene, it can function as both "scaffold" and "quencher" of the Cu(2+)-dependent DNAzyme, facilitating the formation of self-assembled graphene-quenched DNAzyme complex. However, Cu(2+)-induced catalytic reaction disturbs the graphene-DNAzyme conformation, which will produce internal DNA cleavage-dependent effect. In this case, the quenched fluorescence in graphene-DNAzyme is quickly recovered to a large extent in 15 min. Compared with common DNAzyme-based sensors, the presented graphene-based catalytic beacon greatly improves the signal-to-background ratio, hence increasing the sensitivity (LOD=0.365 nM). Furthermore, the controllable DNA cleavage reaction provides an original and alternative internal method to regulate the interaction between graphene and DNA relative to the previous external sequence-specific hybridization-dependent regulation, which will open new opportunities for nucleic studies and sensing applications in the future.     

Deletion analysis in the catalytic region of the 10-23 DNA enzyme

In this study, the functional relevance of the core nucleotides of the RNA cleaving 10-23 DNA enzyme (DNAzyme) was investigated. Systematic deletion studies revealed that DNAzymes lacking thymine at position 8 (T8) retain catalytic activity comparable to that of the wild-type enzyme. Deletion of the adjacent cytosine at position 7 (C7) also resulted in a highly active enzyme and even the double deletion mutant C7/T8 displayed cleavage activity, although the catalytic rate under multiple turnover conditions was found to be reduced by one order of magnitude. The identification of non-essential nucleotides in the catalytic core might help to stabilize the DNAzyme against nucleolytic degradation and to overcome problems in elucidating its three-dimensional structure.     

Biophysically Inspired Rational Design of Structured Chimeric Substrates for DNAzyme Cascade Engineering

The development of large-scale molecular computational networks is a promising approach to implementing logical decision making at the nanoscale, analogous to cellular signaling and regulatory cascades. DNA strands with catalytic activity (DNAzymes) are one means of systematically constructing molecular computation networks with inherent signal amplification. Linking multiple DNAzymes into a computational circuit requires the design of substrate molecules that allow a signal to be passed from one DNAzyme to another through programmed biochemical interactions. In this paper, we chronicle an iterative design process guided by biophysical and kinetic constraints on the desired reaction pathways and use the resulting substrate design to implement heterogeneous DNAzyme signaling cascades. A key aspect of our design process is the use of secondary structure in the substrate molecule to sequester a downstream effector sequence prior to cleavage by an upstream DNAzyme. Our goal was to develop a concrete substrate molecule design to achieve efficient signal propagation with maximal activation and minimal leakage. We have previously employed the resulting design to develop high-performance DNAzyme-based signaling systems with applications in pathogen detection and autonomous theranostics.     

Structural rearrangements of the 10-23 DNAzyme to beta 3 integrin subunit mRNA induced by cations and their relations to the catalytic activity

The intracellular ability of the "10-23" DNAzyme to efficiently inhibit expression of targeted proteins has been evidenced by in vitro and in vivo studies. However, standard conditions for kinetic measurements of the DNAzyme catalytic activity in vitro include 25 mM Mg2+, a concentration that is very unlikely to be achieved intracellularly. To study this discrepancy, we analyzed the folding transitions of the 10-23 DNAzyme induced by Mg2+. For this purpose, spectroscopic analyzes such as fluorescence resonance energy transfer, fluorescence anisotropy, circular dichroism, and surface plasmon resonance measurements were performed. The global geometry of the DNAzyme in the absence of added Mg2+ seems to be essentially extended, has no catalytic activity, and shows a very low binding affinity to its RNA substrate. The folding of the DNAzyme induced by binding of Mg2+ may occur in several distinct stages. The first stage, observed at 0.5 mM Mg2+, corresponds to the formation of a compact structure with limited binding properties and without catalytic activity. Then, at 5 mM Mg2+, flanking arms are projected at right position and angles to bind RNA. In such a state, DNAzyme shows substantial binding to its substrate and significant catalytic activity. Finally, the transition occurring at 15 mM Mg2+ leads to the formation of the catalytic domain, and DNAzyme shows high binding affinity toward substrate and efficient catalytic activity. Under conditions simulating intracellular conditions, the DNAzyme was only partially folded, did not bind to its substrate, and showed only residual catalytic activity, suggesting that it may be inactive in the transfected cells and behave like antisense oligodeoxynucleotide.     

A general strategy for effector-mediated control of RNA-cleaving ribozymes and DNA enzymes

A novel and general approach is described for generating versions of RNA-cleaving ribozymes (RNA enzymes) and DNAzymes (DNA enzymes), whose catalytic activity can be controlled by the binding of activator molecules. Variants of the RNA-cleaving 10-23 DNAzyme and 8-17 DNAzyme were created, whose catalysis was activated by up to approximately 35-fold by the binding of the effector adenosine. The design of such variants was possible even though the tertiary folding of the two DNAzymes is not known. Variants of the hammerhead ribozyme were constructed, to respond to the effectors ATP and flavin mononucleotide. Whereas in conventional allosteric ribozymes, effector-binding modulates the chemical step of catalysis, here, effectors exercise their effect upon the substrate-binding step, by stabilizing the enzyme-substrate complex. Because such an approach for controlling the activity of DNAzymes/ribozymes requires no prior knowledge of the enzyme's secondary or tertiary folding, this regulatory strategy should be generally applicable to any RNA-cleaving ribozyme or DNAzyme, natural or in vitro selected, provided substrate-recognition is achieved by Watson-Crick base-pairing.     

An efficient RNA-cleaving DNA enzyme can specifically target the 5'-untranslated region of severe acute respiratory syndrome associated coronavirus (SARS-CoV)

BACKGROUND: The worldwide epidemic of severe acute respiratory syndrome (SARS) in 2003 was caused by a novel coronavirus called SARS-CoV. We report the use of DNAzyme (catalytic DNA) to target the 5'-untranslated region (5'UTR) of a highly conserved fragment in the SARS genome as an approach to suppression of SARS-CoV replication. A mono-DNA enzyme (Dz-104) possessing the 10-23 catalytic motif was synthesized and tested both in vitro and in cell culture. MATERIALS AND METHODS: SARS-CoV total RNA was isolated, extracted from the SARS-CoV-WHU strain and converted into cDNA. We designed a RNA-cleaving 10-23 DNAzyme targeting at the loop region of the 5'UTR of SARS-CoV. The designed DNAzyme, Dz-104, and its mutant version, Dz-104 (mut), as a control consist of 9 + 9 arm sequences with a 10-23 catalytic core. In vitro cleavage was performed using an in vitro transcribed 5'UTR RNA substrate. A vector containing a fused 5'UTR and enhanced green fluorescent protein (eGFP) was co-transfected with the DNAzyme into E6 cells and the cells expressing eGFP were visualized with fluorescence microscopy and analyzed by fluorescence-activated cell sorting (FACS). RESULTS AND CONCLUSIONS: Our results demonstrated that this DNAzyme could efficiently cleave the SARS-CoV RNA substrate in vitro and inhibit the expression of the SARS-CoV 5'UTR-eGFP fusion RNA in mammalian cells. This work presents a model system to rapidly screen effective DNAzymes targeting SARS and provides a basis for potential therapeutic use of DNA enzymes to combat the SARS infection.     

Sensitive dual DNAzymes-based sensors designed by grafting self-blocked G-quadruplex DNAzymes to the substrates of metal ion-triggered DNA/RNA-cleaving DNAzymes

A universal label-free metal ion sensor design strategy was developed on the basis of a metal ion-specific DNA/RNA-cleaving DNAzyme and a G-quadruplex DNAzyme. In this strategy, the substrate strand of the DNA/RNA-cleaving DNAzyme was designed as an intramolecular stem-loop structure, and a G-rich sequence was caged in the double-stranded stem and could not form catalytically active G-quadruplex DNAzyme. The metal ion-triggered cleavage of the substrate strand could result in the release of the G-rich sequence and subsequent formation of a catalytic G-quadruplex DNAzyme. The self-blocking mechanism of the G-quadruplex DNAzyme provided the sensing system with a low background signal. The signal amplifications of both the DNA/RNA-cleaving DNAzyme and the G-quadruplex DNAzyme provided the sensing system with a high level of sensitivity. This sensor design strategy can be used for metal ions with reported specific DNA/RNA-cleaving DNAzymes and extended for metal ions with unique properties. As examples, dual DNAzymes-based Cu(2+), Pb(2+) and Hg(2+) sensors were designed. These "turn-on" colorimetric sensors can simply detect Cu(2+), Pb(2+) and Hg(2+) with high levels of sensitivity and selectivity, with detection limits of 4nM, 14nM and 4nM, respectively.     

Highly effective colorimetric and visual detection of ATP by a DNAzyme-aptamer sensor

A new and simple method was developed to detect adenosine triphosphate (ATP) by using a DNAzyme aptamer sensor. The DNAzyme used was a single‐stranded DNA that could combine with hemin. The aptamer, a single, short nucleic acid sequence that can specifically bind with many targets, was an anti‐ATP aptamer. Two DNA sequences were designed: i) a functional chain (Chain A) consisting of two parts, i.e., the anti‐ATP aptamer (recognition part) and the DNAzyme (signal transduction part) and ii) a blocker chain (Chain B), which could partially hybridize with Chain A. The hybridized chains A and B were unfolded by the addition of ATP and hemin, and the blocker chain and the complex of the functional chain with ATP and hemin were in solution. The DNAzyme in the functional chain formed a G‐quadruplex with hemin and then catalyzed the oxidation by H₂O₂ of 2,2′‐azinobis(3‐ethylbenzthiazoline‐6‐sulfonic acid) (ABTS²⁻) to the colored ABTS^.− radical. The color change caused by this reaction could be clearly observed by naked eye, and the absorbance was recorded at 414 nm. The detection limit was 1×10⁻⁶ M .     

Position-specific modification with imidazolyl group on10–23 DNAzyme realized catalytic activity enhancement

Nucleoside analogues with imidazolyl and histidinyl groups were synthesized for site-specific modification on the catalytic core of 10–23 DNAzyme. The distinct position-dependent effect of imidazolyl group was observed. Positive effect at A9 position was always observed. The pH- and Mg²⁺-dependence of the imidazolyl-modified DNAzymes suggested that imidazolyl group in 10–23 DNAzyme probably plays a dual role, its hydrogen bonding ability and spacial occupation play the favorable influence on the catalytic conformation of the modified DNAzymes. This research demonstrated that the catalytic performance of DNAzymes could be enhanced by incorporation of additional functional groups. Chemical modification is a feasible approach toward more efficient DNAzymes for therapeutic and biotechnological applications.     

Studies on the Effect of Thymine-Mercury-Thymine Stem as a Structural or Functional Motif in DNAzymes

T-Hg-T base pair formation has been demonstrated to be compatible with duplex DNA context, with considerable thermal stability contribution. Here, the T-Hg-T stem in two small DNAzymes 8–17 and 10–23 was studied for its structural and functional roles. The recognition arm 5′ to the cleavage site of 10–23 DNAzyme complex and the stem in the catalytic loop of 8–17 DNAzyme could be replaced by consecutive T-Hg-T stem of different length. The linear relationship between the activity of the complex 10–23DZ-6T+D19–6T and the concentration of Hg²⁺ demonstrated that the T-Hg-T stem contributes thermal stability of the recognition arm binding. The effect of T-Hg-T stem in the catalytic core of 8–17 DNAzyme and the position-dependent effect in 10–23 DNAzyme demonstrated that T-Hg-T base pair is not compatible with canonical base pairs in playing the functions of nucleic acids.     

A one-step electrochemical method for DNA detection that utilizes a peroxidase-mimicking DNAzyme amplified through PCR of target DNA

A novel one-step electrochemical method for DNA detection is described. The procedure utilizes a reaction catalyzed by a peroxidase-mimicking DNAzyme to produce a product, which forms an insoluble precipitation layer on the surface of an electrode. A rationally designed forward primer, conjugated with a peroxidase DNAzyme complementary sequence at its 5′-end, is used for PCR amplification of target DNA. As a result, the DNAzyme sequence is produced by amplification only when the target DNA is present in the sample. The PCR product is then subjected to the precipitation reaction on the electrode surface using an electrolyte assay buffer containing 4-chloronaphthol, hydrogen peroxide, ferrocenemethanol, hemin, and 5′-lambdaexonuclease. Finally, analysis is carried out using Faradaic impedance spectroscopy. The impedance value was found to greatly increase when target DNA is present owing to the formation of a precipitation layer on the electrode surface caused by the catalytic action of the DNAzyme. In contrast, no impedance increase is observed when a control sample not containing target DNA is utilized. By employing this strategy, target DNA from Chlamydia trachomatis was reliably detected within a 10 min period following precipitation without the need for complicated secondary procedures. This effort has led to the development of a highly convenient electrochemical one-step method for DNA detection that utilizes a peroxidase-mimicking DNAzyme, which is specifically designed to undergo amplification during PCR of target DNA.     

Zippered G-quadruplex/hemin DNAzyme: exceptional catalyst for universal bioanalytical applications

G-quadruplex (G4)/hemin DNAzyme is promising horseradish peroxidase (HRP)-mimic candidate in the biological field. However, its relatively unsatisfactory catalytic capacity limits the potential applications. Inspired by nature protease, we conducted a proximity-enhanced cofactor assembly strategy (PECA) to form an exceptional HRP mimic, namely zippered G4/hemin DNAzyme (Z-G4/H). The hybridization of short oligonucleotides induced proximity assembly of the DNA-grafted hemin (DGH) with the complementary G4 sequences (cG4s), mimicking the tight configuration of protease cofactor and apoenzyme. The detailed investigations of catalytic efficiency and mechanism verified the higher activity, more rapid catalytic rate and high environmental tolerance of the Z-G4/H than the classical G4/hemin DNAzymes (C-G4/H). Furthermore, a proximity recognition transducer has been developed based on the PECA for sensitive detection of gene rearrangement and imaging human epidermal growth factor receptor 2 protein (HER2) dimerization on cell surfaces. Our studies demonstrate the high efficiency of Z-G4/H and its universal application potential in clinical diagnostics and biomolecule interaction research. It also may offer significant opportunities and inspiration for the engineering of the protease-free mimic enzyme.